KŻKatarzyna Żelazny

Katarzyna Żelazny

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Katarzyna Żelazny has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Statistical Analysis of the Weight and Center-of-Gravity Position of an Empty Container Ship

    by Tadeusz Szelangiewicz, Katarzyna Żelazny

    For the correct execution of the preliminary design of a transport ship, among other things, approximate formulas enabling the calculation of the weight of the unladen ship and the location of the center of gravity are necessary. The aim of the conducted research was to develop approximate formulas for calculating the weight and center of gravity of an empty container ship with a size ranging from 270 TEU to 3100 TEU, depending on the basic design parameters: ship speed V, deadweight DWT, and number of TEU containers. Since the weight of an unladen container ship has a very large impact on the ship’s operating parameters, an additional aim was to obtain regression formulas with greater accuracy than similar formulas published in the literature. Simple and multiple regression methods were used to develop regression formulas. The obtained results were verified on the basis of experimentally measured parameters obtained from built ships. The regression formulas presented in this article are characterized by high accuracy, greater than that of similar formulas published in the literature, and were developed for container ships currently under construction. A novelty of this study is the development of regression formulas for weight classes, which make up the total weight of an unladen ship.


  • Open Access

    Analysis of the Parameters of an Ecological Power Supply Wire System for Moving and Stabilising the Position of a Floating Dock

    by Tadeusz Szelangiewicz, Katarzyna Żelazny, Szymon Sobków

    This research study aims to develop a system which ensures the mobility of a floating dock and its stability in position during docking operations. The dock is designed for operation in a river canal. In order to dock a ship, it is moved away from the quay over a dock trench. Initial requirements and design criteria for the system were determined. The most important of them include docking in the maximum weather conditions, corresponding to a wind speed of 5° Beaufort (5°B), and a zero-emission target for the power supply system (use of a renewable energy source). A wire and winch system was designed to move the dock and stabilise it in position during docking operations. The system comprises mooring wires which are tied to bollards on both quays, and wire winches mounted on both sides of the dock. The wire winches are hydraulically driven, and the hydraulic pumps, run by electric motors, are powered with batteries charged using photovoltaic panels. Statistical environmental parameters (wind, river current) were analysed and the probability of certain mooring wire loads and the corresponding wire winch power output were quantified. Based on these calculations, the power of photovoltaic panels and capacity of the batteries required to power the dock moving system were determined. This paper discusses the system design as well as the results of trials.

  • Open Access

    An Innovative and Environmentally Friendly System for Moving and Stabilising a Floating Dock in Position during Docking Operations

    by Tadeusz Szelangiewicz, Katarzyna Żelazny, Szymon Sobków

    The study is aimed at designing a system which ensures dock mobility (moving from the quay to the dock trench) and stabilises the dock in position during docking operations. A number of requirements and design criteria have been defined for the dock moving system, the most important of them being its capability to support docking operations at a maximum wind force of 5 °B, and environmental friendliness (zero exhaust fumes or other pollutants). As part of the research, concepts for various dock moving systems have been developed, including calculations of technical and operational parameters. Each concept has been analysed for meeting the defined requirements and design criteria. Ultimately, a system which meets all of the requirements and criteria and is completely environmentally friendly has been selected for construction. The authors discuss the entire process of creating system concepts, parameter calculations, and assessment of fulfilment of the requirements and design criteria. The principle of operation and the design of the system have been explained. The dock is powered by electricity stored in batteries and generated from renewable energy sources.


  • Open Access

    Reducing CO2 Emissions during the Operation of Unmanned Transport Vessels with Diesel Engines

    by Tadeusz Szelangiewicz, Katarzyna Żelazny

    Environmental protection is one of the most challenging tasks facing mankind. Reducing CO2 emissions in the global economy, including maritime transport, is being pursued in various ways, one of them being the design work leading to the construction and operation of unmanned ships. Unmanned vessels operating on longer routes will still have internal combustion propulsion. However, they will not have the superstructure and the various systems and equipment necessary for the crew. This will result in an unmanned vessel having less weight, less displacement and, therefore, less size, resistance and propulsion power than a manned vessel for the same transport capacity. Consequently, the unmanned vessel will emit less CO2. This paper presents a novel method for predicting fuel consumption and CO2 emissions for unmanned container ships. The method uses regression relationships of geometric and operational parameters for manned container ships developed for this purpose to determine such relationships for unmanned ships. On this basis, it is shown what the level of CO2 reduction will be compared to manned container ships.


  • Open Access

    Reduction of Resistance, Fuel Consumption and GHG Emission of a Small Fishing Vessel by Adding a Bulbous Bow

    by Tadeusz Szelangiewicz, Tomasz Abramowski, Katarzyna Żelazny, Karol Sugalski

    Protection of marine environment and reduction of GHG emissions are currently imperative criterion for ship design. For ships in service, including fishing vessels powered by internal combustion engines, options of retrofitting are sought to reduce their hydrodynamic resistance and fuel consumption. One such possibility is the addition of a simple-shape bulbous bow, which can be installed at low cost to upgrade a fishing vessel. We present an analysis of the effect that the bulbous bow has on fishing vessel resistance across the whole range of speeds at which the entire work cycle of the vessel is carried out. The resistance was calculated using a calculation of fluid dynamics (CFD) method for the actual size of the vessel. We show that it is possible to develop such a bulbous bow for which the resistance of fishing vessel with a bulbous bow is going to be lower than that of an unmodified shape. For the modified shape of the fishing vessel, fuel consumption, amount and composition of exhaust gases were calculated and the obtained results were compared with the parameters of the vessel without modification. The tests carried out and the obtained calculation results indicate that a significant reduction of fuel consumption and GHG emissions may be obtained for the existing old fishing vessels at low anticipated modernization costs.


  • Open Access

    Application of Measurement Sensors and Navigation Devices in Experimental Research of the Computer System for the Control of an Unmanned Ship Model

    by Tadeusz Szelangiewicz, Katarzyna Żelazny, Andrzej Antosik, Maciej Szelangiewicz

    Unmanned autonomous transport vessels (MASS) are the future of maritime transport. The most important task in the design and construction of unmanned ships is to develop algorithms and a computer program for autonomous control. In order for such a computer program to properly control the ship (realizing various functions), the ship must be equipped with a computer system as well as measurement sensors and navigation devices, from which the recorded parameters are processed and used for autonomous control of the ship. Within the framework of conducted research on autonomous ships, an experimental model of an unmanned ship was built. This model was equipped with a propulsion system not commonly used on transport vessels (two azimuth stern thrusters and two bow tunnel thrusters), but providing excellent propulsion and steering characteristics. A complete computer system with the necessary measuring sensors and navigation devices has also been installed in the model of the ship, which enables it to perform all functions during autonomous control. The objective of the current research was to design and build a prototype computer system with the necessary measurement sensors and navigation devices with which to autonomously control the unmanned ship model. The designed computer system is expected to be optimal for planned tasks during control software tests. Tests carried out on open waters confirmed the correctness of the operation of the computer system and the entire measurement and navigation equipment of the built model of the unmanned transport vessel.


  • Open Access

    Mathematical model for calculating fuel consumption in real effect weather for a vehicle vessel

    by Tadeusz Szelangiewicz, Katarzyna Żelazny

    During ship operation, one of the most important tasks is forecasting the ocean route. One of the criteria for forecasting is the minimum fuel consumption. Fuel consumption and associated emissions are also very important for other criteria. In common use, as well as in various publications, the results of calculations of fuel consumption obtained from simplified algorithms are presented. The article presents a mathematical model for calculating fuel consumption for a floating vessel in various weather conditions. In this model different criteria for controlling the propulsion engine were used by changing the fuel dose. The results of the calculations included include: fuel consumption, power of the propulsion engine and operating speed of the ship in varying weather conditions


  • Open Access

    Intensity of Dangerous Phones from Waves on Selected Oceanic Routes

    by Tadeusz Szelangiewicz, Katarzyna Żelazny

    Ocean routes are recommended for ships based on economic criteria. Under the influence of waves. during sailing of the ship. various dangerous phenomena arise which can lead to marine crashes. Although weather sites are known to provide short-term weather forecasts (wave and wind parameters). this information is not used to calculate corrections of ocean-route guidelines. A captain based on his knowledge and experience can make such adjustments. The article presents the results of calculations of the values of dangerous parameters of phenomena which may occur during a cruise on example ocean routes. For the calculation of dangerous phenomena. the average statistical long-term (seasonal) parameters contained in weather atlas were used.

  • Open Access

    Dangerous Phones Arising from the Waves During the Oceanic Route Ship

    by Tadeusz Szelangiewicz, Katarzyna Żelazny

    Ocean routes are recommended for ships based on economic criteria. Under the influence of waves, during the cruise of the ship, dangerous phenomena are created, the intensity of which depends on the speed of the ship and its course in relation to the direction of the waves, the state of the sea, the size of the ship, the state of loading. Although weather services are known, waves parameters are not used to calculate the value of parameters that characterize dangerous phenomena. The article presents the most frequently analysed dangerous phenomena, how they are calculated, the criteria for their evaluation, and the results of calculations for the selected vessel.

  • Open Access

    Ship’s Operational Speed on the Planned Ocean Route in Real Weather Conditions

    by Tadeusz Szelangiewicz, Katarzyna Żelazny

    While operating the ship, one of the most important tasks is forecasting the ocean route. For this purpose, the speed characteristics of the ship are used, which are used in specialized computer systems and presented in publications. However, published algorithms for speed (or decrease of speed) calculations of a ship in real weather conditions on given routes are very simplified and do not contain all the relevant parameters related to the ship’s hull (affecting its resistance when sailing, eg on waves), its propulsion and weather conditions. The article presents its own, more detailed mathematical model of the speed of the ship, and the performed calculations of speed of the ship were compared with the algorithms available in the literature and with the records from the ship’s log.