Hadar Sclar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hadar Sclar has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
- Doron Aurbach
Department of Chemistry, Bar-Ilan University, Ramat-Gan, Israel
7 shared publications Judith Grinblat
6 shared publications- Sandipan Maiti
Department of Chemistry, Institute for Nanotechnology and Advanced Materials (BINA), Bar-Ilan University, Ramat-Gan 52900, Israel
6 shared publications Boris Markovsky
4 shared publicationsDoron Aurbach
4 shared publicationsMichael Talianker
Department of Materials Engineering Ben‐Gurion University of the Negev Beer‐Sheva 84105 Israel
4 shared publications
Latest Publications
- 8 September 2022
- Published by Wiley in Small Methods
- Vol. 6 (10) , e2200674
Stabilizing High‐Voltage LiNi0.5Mn1.5O4 Cathodes for High Energy Rechargeable Li Batteries by Coating With Organic Aromatic Acids and Their Li Salts
Here, three types of surface coatings based on adsorption of organic aromatic acids or their Li salts are applied as functional coating substrates to engineer the surface properties of high voltage LiNi0.5Mn1.5O4 (LNMO) spinel cathodes. The materials used as coating include 1,3,5‐benzene‐tricarboxylic acid (trimesic acid [TMA]), its Li‐salt, and 1,4‐benzene‐dicarboxylic acid (terephthalic acid). The surface coating involves simple ethanol liquid‐phase mixing and low‐temperature heat treatment under nitrogen flow. In typical comparative studies, TMA‐coated (3–5%) LNMO cathodes deliver >90% capacity retention after 400 cycles with significantly improved rate performance in Li‐coin cells at 30 °C compared to uncoated material with capacity retention of ≈40%. The cathode coating also prevents the rapid drop in the electrochemical activity of high voltage Li cells at 55 °C. Studies of high voltage full cells containing TMA coated cathodes versus graphite anodes also demonstrate improved electrochemical behavior, including improved cycling performance and capacity retention, increased rate capabilities, lower voltage hysteresis, and very minor direct current internal resistance evolution. In line with the highly positive effects on the electrochemical performance, it is found that these coatings reduce detrimental transition metal cations dissolution and ensure structural stability during prolonged cycling and thermal stability at elevated temperatures.
- 8 September 2022
- Published by Wiley in Small Methods
- Vol. 6 (10) , e2200674
Stabilizing High‐Voltage LiNi0.5Mn1.5O4 Cathodes for High Energy Rechargeable Li Batteries by Coating With Organic Aromatic Acids and Their Li Salts
Here, three types of surface coatings based on adsorption of organic aromatic acids or their Li salts are applied as functional coating substrates to engineer the surface properties of high voltage LiNi0.5Mn1.5O4 (LNMO) spinel cathodes. The materials used as coating include 1,3,5‐benzene‐tricarboxylic acid (trimesic acid [TMA]), its Li‐salt, and 1,4‐benzene‐dicarboxylic acid (terephthalic acid). The surface coating involves simple ethanol liquid‐phase mixing and low‐temperature heat treatment under nitrogen flow. In typical comparative studies, TMA‐coated (3–5%) LNMO cathodes deliver >90% capacity retention after 400 cycles with significantly improved rate performance in Li‐coin cells at 30 °C compared to uncoated material with capacity retention of ≈40%. The cathode coating also prevents the rapid drop in the electrochemical activity of high voltage Li cells at 55 °C. Studies of high voltage full cells containing TMA coated cathodes versus graphite anodes also demonstrate improved electrochemical behavior, including improved cycling performance and capacity retention, increased rate capabilities, lower voltage hysteresis, and very minor direct current internal resistance evolution. In line with the highly positive effects on the electrochemical performance, it is found that these coatings reduce detrimental transition metal cations dissolution and ensure structural stability during prolonged cycling and thermal stability at elevated temperatures.
- Open Access
- 20 March 2022
- Published by MDPI AG in Inorganics
- Vol. 10 (3) , 39
Improved Electrochemical Behavior and Thermal Stability of Li and Mn-Rich Cathode Materials Modified by Lithium Sulfate Surface Treatment
High-energy cathode materials that are Li- and Mn-rich lithiated oxides—for instance, 0.35Li2MnO3.0.65LiNi0.35Mn0.45Co0.20O2 (HE-NCM)—are promising for advanced lithium-ion batteries. However, HE-NCM cathodes suffer from severe degradation during cycling, causing gradual capacity loss, voltage fading, and low-rate capability performance. In this work, we applied an effective approach to creating a nano-sized surface layer of Li2SO4 on the above material, providing mitigation of the interfacial side reactions while retaining the structural integrity of the cathodes upon extended cycling. The Li2SO4 coating was formed on the surface of the material by mixing it with nanocrystalline Li2SO4 and annealing at 600 °C. We established enhanced electrochemical behavior with ~20% higher discharge capacity, improved charge-transfer kinetics, and higher rate capability of HE-NCM cathodes due to the presence of the Li2SO4 coating. Online electrochemical mass spectrometry studies revealed lower CO2 and H2 evolution in the treated samples, implying that the Li2SO4 layer partially suppresses the electrolyte degradation during the initial cycle. In addition, a ~28% improvement in the thermal stability of the Li2SO4-treated samples in reactions with battery solution was also shown by DSC studies. The post-cycling analysis allowed us to conclude that the Li2SO4 phase remained on the surface and retained its structure after 100 cycles.
- 20 March 2022
- Published by MDPI AG in Inorganics
- Vol. 10 (3) , 39
Open AccessImproved Electrochemical Behavior and Thermal Stability of Li and Mn-Rich Cathode Materials Modified by Lithium Sulfate Surface Treatment
High-energy cathode materials that are Li- and Mn-rich lithiated oxides—for instance, 0.35Li2MnO3.0.65LiNi0.35Mn0.45Co0.20O2 (HE-NCM)—are promising for advanced lithium-ion batteries. However, HE-NCM cathodes suffer from severe degradation during cycling, causing gradual capacity loss, voltage fading, and low-rate capability performance. In this work, we applied an effective approach to creating a nano-sized surface layer of Li2SO4 on the above material, providing mitigation of the interfacial side reactions while retaining the structural integrity of the cathodes upon extended cycling. The Li2SO4 coating was formed on the surface of the material by mixing it with nanocrystalline Li2SO4 and annealing at 600 °C. We established enhanced electrochemical behavior with ~20% higher discharge capacity, improved charge-transfer kinetics, and higher rate capability of HE-NCM cathodes due to the presence of the Li2SO4 coating. Online electrochemical mass spectrometry studies revealed lower CO2 and H2 evolution in the treated samples, implying that the Li2SO4 layer partially suppresses the electrolyte degradation during the initial cycle. In addition, a ~28% improvement in the thermal stability of the Li2SO4-treated samples in reactions with battery solution was also shown by DSC studies. The post-cycling analysis allowed us to conclude that the Li2SO4 phase remained on the surface and retained its structure after 100 cycles.
- Open Access
Studies of Nickel-Rich LiNi0.85Co0.10Mn0.05O2 Cathode Materials Doped with Molybdenum Ions for Lithium-Ion Batteries
In this work, we continued our systematic investigations on synthesis, structural studies, and electrochemical behavior of Ni-rich materials Li[NixCoyMnz]O2 (x + y + z = 1; x ≥ 0.8) for advanced lithium-ion batteries (LIBs). We focused, herein, on LiNi0.85Co0.10Mn0.05O2 (NCM85) and demonstrated that doping this material with high-charge cation Mo6+ (1 at. %, by a minor nickel substitution) results in substantially stable cycling performance, increased rate capability, lowering of the voltage hysteresis, and impedance in Li-cells with EC-EMC/LiPF6 solutions. Incorporation of Mo-dopant into the NCM85 structure was carried out by in-situ approach, upon the synthesis using ammonium molybdate as the precursor. From X-ray diffraction studies and based on our previous investigation of Mo-doped NCM523 and Ni-rich NCM811 materials, it was revealed that Mo6+ preferably substitutes Ni residing either in 3a or 3b sites. We correlated the improved behavior of the doped NCM85 electrode materials in Li-cells with a partial Mo segregation at the surface and at the grain boundaries, a tendency established previously in our lab for the other members of the Li[NixCoyMnz]O2 family.
Open AccessStudies of Nickel-Rich LiNi0.85Co0.10Mn0.05O2 Cathode Materials Doped with Molybdenum Ions for Lithium-Ion Batteries
In this work, we continued our systematic investigations on synthesis, structural studies, and electrochemical behavior of Ni-rich materials Li[NixCoyMnz]O2 (x + y + z = 1; x ≥ 0.8) for advanced lithium-ion batteries (LIBs). We focused, herein, on LiNi0.85Co0.10Mn0.05O2 (NCM85) and demonstrated that doping this material with high-charge cation Mo6+ (1 at. %, by a minor nickel substitution) results in substantially stable cycling performance, increased rate capability, lowering of the voltage hysteresis, and impedance in Li-cells with EC-EMC/LiPF6 solutions. Incorporation of Mo-dopant into the NCM85 structure was carried out by in-situ approach, upon the synthesis using ammonium molybdate as the precursor. From X-ray diffraction studies and based on our previous investigation of Mo-doped NCM523 and Ni-rich NCM811 materials, it was revealed that Mo6+ preferably substitutes Ni residing either in 3a or 3b sites. We correlated the improved behavior of the doped NCM85 electrode materials in Li-cells with a partial Mo segregation at the surface and at the grain boundaries, a tendency established previously in our lab for the other members of the Li[NixCoyMnz]O2 family.
- 8 January 2020
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 167 (11) , 110563
Enhancement of Electrochemical Performance of Lithium and Manganese-Rich Cathode Materials via Thermal Treatment with SO 2
In this study, we present a novel surface modification approach via SO 2 gas treatment at 200 °C–400 °C to enhance the electrochemical performance of Li and Mn-rich cathode materials 0.35Li 2 MnO 3 ·0.65LiNi 0.35 Mn 0.45 Co 0.20 O 2 (HE-NCM) for advanced lithium-ion batteries. It was established by X-ray photoelectron spectroscopy that the SO 2 treatment leads to the formation of surface sulfates and sulfites on the material, while the bulk remains unaffected, as confirmed by X-ray and electron diffraction studies. Based on the results obtained, we proposed possible mechanisms of the SO 2 thermal treatment that include partial reduction of manganese (however, we could not find any substantial evidence for it in the XPS data) and oxidation of sulfur. The electrochemical performance was evaluated by testing the materials as cathodes in coin-type half-cells with metallic lithium anodes at 25 °C and 30 °C. The main findings are as follows: the SO 2 -treated materials demonstrate ∼10% higher capacity at all C-rates and lower the voltage hysteresis during prolonged cycling compared to the untreated samples. The proposed approach to modify the surface of HE-NCM materials by SO 2 treatment is demonstrated to be a promising method to enhance the electrochemical performance of these cathodes.
- 8 January 2020
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 167 (11) , 110563
Enhancement of Electrochemical Performance of Lithium and Manganese-Rich Cathode Materials via Thermal Treatment with SO 2
In this study, we present a novel surface modification approach via SO 2 gas treatment at 200 °C–400 °C to enhance the electrochemical performance of Li and Mn-rich cathode materials 0.35Li 2 MnO 3 ·0.65LiNi 0.35 Mn 0.45 Co 0.20 O 2 (HE-NCM) for advanced lithium-ion batteries. It was established by X-ray photoelectron spectroscopy that the SO 2 treatment leads to the formation of surface sulfates and sulfites on the material, while the bulk remains unaffected, as confirmed by X-ray and electron diffraction studies. Based on the results obtained, we proposed possible mechanisms of the SO 2 thermal treatment that include partial reduction of manganese (however, we could not find any substantial evidence for it in the XPS data) and oxidation of sulfur. The electrochemical performance was evaluated by testing the materials as cathodes in coin-type half-cells with metallic lithium anodes at 25 °C and 30 °C. The main findings are as follows: the SO 2 -treated materials demonstrate ∼10% higher capacity at all C-rates and lower the voltage hysteresis during prolonged cycling compared to the untreated samples. The proposed approach to modify the surface of HE-NCM materials by SO 2 treatment is demonstrated to be a promising method to enhance the electrochemical performance of these cathodes.
- 24 May 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (25) , 15215-15224
Li/Fe substitution in Li-rich Ni, Co, Mn oxides for enhanced electrochemical performance as cathode materials
Li-rich nickel cobalt manganese (NCM) oxides are among the most promising cathode materials for lithium-ion batteries owing to their high specific charges and operating voltages. However, their crystal structures are unstable upon prolonged cycling, leading to a collapse of their electrochemical performance. In this study, we investigated Fe doping of Li-rich NCM materials and explored various Li/Fe ratios. Compared with the reference Li-rich NCM material, the Li1.16(Ni0.18Co0.10Mn0.52Fe0.02)O2 composition exhibited a higher specific charge, potential drop mitigation at fast cycling rates, and an enhanced rate capability. At a rate of 4C, this composition exhibited a specific charge of 150 mA h g−1, which was as much as 50% higher than that of the reference (100 mA h g−1). Neutron and X-ray diffraction data for compounds with different Fe doping concentrations indicated that the crystallographic structure was preserved with up to 2 mol% Fe without the formation of separate impurity phases. Furthermore, we found that the crystal structure of this Fe-doped material was less susceptible to the effects of prolonged cycling than the reference compound. Complementary investigations with X-ray photoelectron spectroscopy revealed that Fe was electrochemically active in the structure, which explains the beneficial effects observed with Fe doping of Li-rich NCM materials, such as an increased specific charge and more stable cycling.
- 24 May 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (25) , 15215-15224
Li/Fe substitution in Li-rich Ni, Co, Mn oxides for enhanced electrochemical performance as cathode materials
Li-rich nickel cobalt manganese (NCM) oxides are among the most promising cathode materials for lithium-ion batteries owing to their high specific charges and operating voltages. However, their crystal structures are unstable upon prolonged cycling, leading to a collapse of their electrochemical performance. In this study, we investigated Fe doping of Li-rich NCM materials and explored various Li/Fe ratios. Compared with the reference Li-rich NCM material, the Li1.16(Ni0.18Co0.10Mn0.52Fe0.02)O2 composition exhibited a higher specific charge, potential drop mitigation at fast cycling rates, and an enhanced rate capability. At a rate of 4C, this composition exhibited a specific charge of 150 mA h g−1, which was as much as 50% higher than that of the reference (100 mA h g−1). Neutron and X-ray diffraction data for compounds with different Fe doping concentrations indicated that the crystallographic structure was preserved with up to 2 mol% Fe without the formation of separate impurity phases. Furthermore, we found that the crystal structure of this Fe-doped material was less susceptible to the effects of prolonged cycling than the reference compound. Complementary investigations with X-ray photoelectron spectroscopy revealed that Fe was electrochemically active in the structure, which explains the beneficial effects observed with Fe doping of Li-rich NCM materials, such as an increased specific charge and more stable cycling.
- 29 April 2019
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 31 (10) , 3840-3847
Mitigating Structural Instability of High-Energy Lithium- and Manganese-Rich LiNixMnyCoz Oxide by Interfacial Atomic Surface Reduction
- 29 April 2019
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 31 (10) , 3840-3847
Mitigating Structural Instability of High-Energy Lithium- and Manganese-Rich LiNixMnyCoz Oxide by Interfacial Atomic Surface Reduction
- 8 February 2018
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 122 (7) , 3773-3779
Ammonia Treatment of 0.35Li2MnO3·0.65LiNi0.35Mn0.45Co0.20O2 Material: Insights from Solid-State NMR Analysis
- 8 February 2018
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 122 (7) , 3773-3779
Ammonia Treatment of 0.35Li2MnO3·0.65LiNi0.35Mn0.45Co0.20O2 Material: Insights from Solid-State NMR Analysis
- 22 May 2017
- Published by Wiley in Advanced Energy Materials
- Vol. 7 (18)
High‐Temperature Treatment of Li‐Rich Cathode Materials with Ammonia: Improved Capacity and Mean Voltage Stability during Cycling
Li‐rich electrode materials of the family xLi2MnO3·(1−x)LiNiaCobMncO2 (a + b + c = 1) suffer a voltage fade upon cycling that limits their utilization in commercial batteries despite their extremely high discharge capacity, ≈250 mA h g−1. Li‐rich, 0.35Li2MnO3·0.65LiNi0.35Mn0.45Co0.20O2, is exposed to NH3 at 400 °C, producing materials with improved characteristics: enhanced electrode capacity and a limited average voltage fade during 100 cycles in half cells versus Li. Three main changes caused by NH3 treatment are established. First, a general bulk reduction of Co and Mn is observed via X‐ray photoelectron spectroscopy and X‐ray absorption near edge structure. Next, a structural rearrangement lowers the coordination number of CoO and MnO bonds, as well as formation of a surface spinel‐like structure. Additionally, Li+ removal from the bulk causes the formation of surface LiOH, Li2CO3, and Li2O. These structural and surface changes can enhance the voltage and capacity stability of the Li‐rich material electrodes after moderate NH3 treatment times of 1–2 h.
- 22 May 2017
- Published by Wiley in Advanced Energy Materials
- Vol. 7 (18)
High‐Temperature Treatment of Li‐Rich Cathode Materials with Ammonia: Improved Capacity and Mean Voltage Stability during Cycling
Li‐rich electrode materials of the family xLi2MnO3·(1−x)LiNiaCobMncO2 (a + b + c = 1) suffer a voltage fade upon cycling that limits their utilization in commercial batteries despite their extremely high discharge capacity, ≈250 mA h g−1. Li‐rich, 0.35Li2MnO3·0.65LiNi0.35Mn0.45Co0.20O2, is exposed to NH3 at 400 °C, producing materials with improved characteristics: enhanced electrode capacity and a limited average voltage fade during 100 cycles in half cells versus Li. Three main changes caused by NH3 treatment are established. First, a general bulk reduction of Co and Mn is observed via X‐ray photoelectron spectroscopy and X‐ray absorption near edge structure. Next, a structural rearrangement lowers the coordination number of CoO and MnO bonds, as well as formation of a surface spinel‐like structure. Additionally, Li+ removal from the bulk causes the formation of surface LiOH, Li2CO3, and Li2O. These structural and surface changes can enhance the voltage and capacity stability of the Li‐rich material electrodes after moderate NH3 treatment times of 1–2 h.
- Open Access
- 28 April 2017
- Published by MDPI AG in Inorganics
- Vol. 5 (2) , 32
Study of Cathode Materials for Lithium-Ion Batteries: Recent Progress and New Challenges
Amongst a number of different cathode materials, the layered nickel-rich LiNiyCoxMn1−y−xO2 and the integrated lithium-rich xLi2MnO3·(1 − x)Li[NiaCobMnc]O2 (a + b + c = 1) have received considerable attention over the last decade due to their high capacities of ~195 and ~250 mAh·g−1, respectively. Both materials are believed to play a vital role in the development of future electric vehicles, which makes them highly attractive for researchers from academia and industry alike. The review at hand deals with both cathode materials and highlights recent achievements to enhance capacity stability, voltage stability, and rate capability, etc. The focus of this paper is on novel strategies and established methods such as coatings and dopings.
- 28 April 2017
- Published by MDPI AG in Inorganics
- Vol. 5 (2) , 32
Open AccessStudy of Cathode Materials for Lithium-Ion Batteries: Recent Progress and New Challenges
Amongst a number of different cathode materials, the layered nickel-rich LiNiyCoxMn1−y−xO2 and the integrated lithium-rich xLi2MnO3·(1 − x)Li[NiaCobMnc]O2 (a + b + c = 1) have received considerable attention over the last decade due to their high capacities of ~195 and ~250 mAh·g−1, respectively. Both materials are believed to play a vital role in the development of future electric vehicles, which makes them highly attractive for researchers from academia and industry alike. The review at hand deals with both cathode materials and highlights recent achievements to enhance capacity stability, voltage stability, and rate capability, etc. The focus of this paper is on novel strategies and established methods such as coatings and dopings.