Dan Mo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dan Mo has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Huijun Yao
Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China
3 shared publications - Jie Liu
Institute of Modern Physics, Chinese Academy of Sciences
3 shared publications - Jinglai Duan
State Key Laboratory of Heavy Ion Science and Technology, Institute of Modern Physics
3 shared publications - Shuangbao Lyu
Institute of Modern Physics, Chinese Academy of Sciences (CAS), Lanzhou 730000, China
2 shared publications - Yonghui Chen
Institute of Modern Physics, Chinese Academy of Sciences (CAS), Lanzhou 730000, China
2 shared publications - Chen Xu
School of Physical Science and Technology, Lanzhou University, Lanzhou 730000, China
1 shared publication
Latest Publications
- 8 June 2020
- Published by Wiley in Advanced Materials Interfaces
- Vol. 7 (15)
Precisely Determined Water Permeabilities of Sub‐100 nm Nanochannels
Membrane ultrafiltration is an extensively used technique for water purification and hence understanding the water flow confined in nanochannels is of vital importance. As a key parameter, water permeability has been the focus of fundamental researches and technical applications. However, water permeability in sub‐100 nm regime is not yet well understood as evidenced by the previously published data which are divergent from theory. Here, the precise determination of water permeabilities of sub‐100 nm nanochannels is reported. This is achieved by the proposed innovative pore diameter‐calibration method with excellent accuracy through replicating the pore geometry, and using the nanoporous ion track‐etched membrane as a model system which features well‐defined, cylindrical, straight, and equally sized nanochannels. Thanks to this accurate calibration method, the measured permeabilities show a remarkably improved precision as compared to the previously reported data. In addition, the measured permeabilities of the ultrafiltration channels are lower than the theoretical predictions. The discrepancy is explained under the framework of the wettability effect. It is expected that the work will shed light on a controversy over a decrease or increase in water permeability of ultrafiltration membranes and also guide the design of ultrafiltration membranes for water purification and separation applications.
- 8 June 2020
- Published by Wiley in Advanced Materials Interfaces
- Vol. 7 (15)
Precisely Determined Water Permeabilities of Sub‐100 nm Nanochannels
Membrane ultrafiltration is an extensively used technique for water purification and hence understanding the water flow confined in nanochannels is of vital importance. As a key parameter, water permeability has been the focus of fundamental researches and technical applications. However, water permeability in sub‐100 nm regime is not yet well understood as evidenced by the previously published data which are divergent from theory. Here, the precise determination of water permeabilities of sub‐100 nm nanochannels is reported. This is achieved by the proposed innovative pore diameter‐calibration method with excellent accuracy through replicating the pore geometry, and using the nanoporous ion track‐etched membrane as a model system which features well‐defined, cylindrical, straight, and equally sized nanochannels. Thanks to this accurate calibration method, the measured permeabilities show a remarkably improved precision as compared to the previously reported data. In addition, the measured permeabilities of the ultrafiltration channels are lower than the theoretical predictions. The discrepancy is explained under the framework of the wettability effect. It is expected that the work will shed light on a controversy over a decrease or increase in water permeability of ultrafiltration membranes and also guide the design of ultrafiltration membranes for water purification and separation applications.
- Open Access
- 15 May 2017
- Published by MDPI AG in Nanomaterials
- Vol. 7 (5) , 108
Surface Modification and Damage of MeV-Energy Heavy Ion Irradiation on Gold Nanowires
Gold nanowires with diameters ranging from 20 to 90 nm were fabricated by the electrochemical deposition technique in etched ion track polycarbonate templates and were then irradiated by Xe and Kr ions with the energy in MeV range. The surface modification of nanowires was studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) characterizations. Different craters with and without protrusion on the gold nanowires were analyzed, and the two corresponding formation mechanisms, i.e., plastic flow and micro-explosion, were investigated. In addition, the sputtered gold nanoparticles caused by ion irradiation were studied and it was confirmed that the surface damage produced in gold nanowires was increased as the diameter of the nanowires decreased. It was also found that heavy ion irradiation can also create stacking fault tetrahedrons (SFTs) in gold nanowires and three different SFTs were confirmed in irradiated nanowires. A statistical analysis of the size distribution of SFTs in gold nanowires proved that the average size distribution of SFT was positively related to the nuclear stopping power of incident ions, i.e., the higher nuclear stopping power of incident ions could generate SFT with a larger average size in gold nanowires.
- 15 May 2017
- Published by MDPI AG in Nanomaterials
- Vol. 7 (5) , 108
Open AccessSurface Modification and Damage of MeV-Energy Heavy Ion Irradiation on Gold Nanowires
Gold nanowires with diameters ranging from 20 to 90 nm were fabricated by the electrochemical deposition technique in etched ion track polycarbonate templates and were then irradiated by Xe and Kr ions with the energy in MeV range. The surface modification of nanowires was studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) characterizations. Different craters with and without protrusion on the gold nanowires were analyzed, and the two corresponding formation mechanisms, i.e., plastic flow and micro-explosion, were investigated. In addition, the sputtered gold nanoparticles caused by ion irradiation were studied and it was confirmed that the surface damage produced in gold nanowires was increased as the diameter of the nanowires decreased. It was also found that heavy ion irradiation can also create stacking fault tetrahedrons (SFTs) in gold nanowires and three different SFTs were confirmed in irradiated nanowires. A statistical analysis of the size distribution of SFTs in gold nanowires proved that the average size distribution of SFT was positively related to the nuclear stopping power of incident ions, i.e., the higher nuclear stopping power of incident ions could generate SFT with a larger average size in gold nanowires.
- Open Access
- 1 December 2016
- Published by MDPI AG in Nanomaterials
- Vol. 6 (12) , 231
Temperature- and Angle-Dependent Magnetic Properties of Ni Nanotube Arrays Fabricated by Electrodeposition in Polycarbonate Templates
Parallel arrays of Ni nanotubes with an external diameter of 150 nm, a wall thickness of 15 nm, and a length of 1.2 ± 0.3 µm were successfully fabricated in ion-track etched polycarbonate (PC) templates by electrochemical deposition. The morphology and crystal structure of the nanotubes were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). Structural analyses indicate that Ni nanotubes have a polycrystalline structure with no preferred orientation. Angle dependent hysteresis studies at room temperature carried out by using a vibrating sample magnetometer (VSM) demonstrate a transition of magnetization between the two different magnetization reversal modes: curling rotation for small angles and coherent rotation for large angles. Furthermore, temperature dependent magnetic analyses performed with a superconducting quantum interference device (SQUID) magnetometer indicate that magnetization of the nanotubes follows modified Bloch’s law in the range 60–300 K, while the deviation of the experimental curve from this law below 60 K can be attributed to the finite size effects in the nanotubes. Finally, it was found that coercivity measured at different temperatures follows Kneller’s law within the premises of Stoner–Wohlfarth model for ferromagnetic nanostructures.
- 1 December 2016
- Published by MDPI AG in Nanomaterials
- Vol. 6 (12) , 231
Open AccessTemperature- and Angle-Dependent Magnetic Properties of Ni Nanotube Arrays Fabricated by Electrodeposition in Polycarbonate Templates
Parallel arrays of Ni nanotubes with an external diameter of 150 nm, a wall thickness of 15 nm, and a length of 1.2 ± 0.3 µm were successfully fabricated in ion-track etched polycarbonate (PC) templates by electrochemical deposition. The morphology and crystal structure of the nanotubes were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). Structural analyses indicate that Ni nanotubes have a polycrystalline structure with no preferred orientation. Angle dependent hysteresis studies at room temperature carried out by using a vibrating sample magnetometer (VSM) demonstrate a transition of magnetization between the two different magnetization reversal modes: curling rotation for small angles and coherent rotation for large angles. Furthermore, temperature dependent magnetic analyses performed with a superconducting quantum interference device (SQUID) magnetometer indicate that magnetization of the nanotubes follows modified Bloch’s law in the range 60–300 K, while the deviation of the experimental curve from this law below 60 K can be attributed to the finite size effects in the nanotubes. Finally, it was found that coercivity measured at different temperatures follows Kneller’s law within the premises of Stoner–Wohlfarth model for ferromagnetic nanostructures.
- 19 November 2014
- Published by Wiley in physica status solidi (c)
- Vol. 12 (1-2) , 107-110
X‐ray photoelectron spectroscopy of gold nanowire arrays embodied in ion‐track template
- 19 November 2014
- Published by Wiley in physica status solidi (c)
- Vol. 12 (1-2) , 107-110
X‐ray photoelectron spectroscopy of gold nanowire arrays embodied in ion‐track template