T. Lurthu Pushparaj
T. Lurthu Pushparaj has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Fantin Irudaya Raj Edward Sehar
Dr. Sivanthi Aditanar College of Engineering
14 shared publications - Appadurai Mangalaraj
Department of Mechanical Engineering, Nehru College of Engineering & Research Centre, Pampady, India
8 shared publications - E. Francy Irudaya Rani
Department of Electronics and Communication Engineering, Francis Xavier Engineering College, Tirunelveli, India
8 shared publications - M. Chithambara Thanu
Department of Mechanical Engineering, Dr. Sivanthi Aditanar College of Engineering, Thoothukudi, India
4 shared publications - S. Darwin
Department of Electronics and Communication Engineering, Dr. Sivanthi Aditanar College of Engineering, Tiruchendur, India
2 shared publications - Vedhamonickom Alexander
Department of Chemistry, Loyola College, Chennai-600034, India
2 shared publications
Latest Publications
- 30 October 2024
- Published by Springer Nature in Multimedia Tools and Applications
- Vol. 84 (26) , 30929-30950
A novel boosted ada-boost classifier for MRI-based brain tumour detection
- 30 October 2024
- Published by Springer Nature in Multimedia Tools and Applications
- Vol. 84 (26) , 30929-30950
A novel boosted ada-boost classifier for MRI-based brain tumour detection
- Open Access
- 5 October 2024
- Published by Qeios Ltd
Review of: "Synthesis of Nickel Nanoparticles Using Ionic Liquid-Based Extract from Amaranthus viridis and Their Antibacterial Activity"
I) An image of Amaranthus Viridus can be added. ii) 2.2. Synthesis of nickel nanoparticle: No annealing temperature/process information. iii) 3.1. UV-Vis analysis of Ni NPs does not describe the absorption studies. Copy-paste error! iv) In FTIR,...
- 5 October 2024
- Published by Qeios Ltd
Open AccessReview of: "Synthesis of Nickel Nanoparticles Using Ionic Liquid-Based Extract from Amaranthus viridis and Their Antibacterial Activity"
I) An image of Amaranthus Viridus can be added. ii) 2.2. Synthesis of nickel nanoparticle: No annealing temperature/process information. iii) 3.1. UV-Vis analysis of Ni NPs does not describe the absorption studies. Copy-paste error! iv) In FTIR,...
- 31 May 2024
- Published by IGI Global Scientific Publishing
- p. 218-247
Traffic Management in Smart Cities Using Unmanned Aerial Vehicles
Traffic management in smart cities using unmanned aerial vehicles (UAVs), commonly known as drones, is an innovative and promising approach to address the growing challenges associated with urban transportation. UAVs can be deployed in various ways to monitor, analyze, and improve traffic flow and safety in smart cities. Traffic surveillance and monitoring, traffic flow optimization, emergency response, public safety, parking management, environmental monitoring, traffic surveys, event and congestion management, infrastructure inspection, and public transport support are some ways in which UAVs can be used for traffic management in smart cities. Collaborations between government agencies, law enforcement, transportation departments, and drone operators are essential for the successful integration of UAVs into the smart city infrastructure. Additionally, advanced technologies like artificial intelligence and machine learning can be used to process and analyze the vast amounts of data collected by drones, allowing for more proactive and efficient traffic management in smart cities.
- 31 May 2024
- Published by IGI Global Scientific Publishing
- p. 218-247
Traffic Management in Smart Cities Using Unmanned Aerial Vehicles
Traffic management in smart cities using unmanned aerial vehicles (UAVs), commonly known as drones, is an innovative and promising approach to address the growing challenges associated with urban transportation. UAVs can be deployed in various ways to monitor, analyze, and improve traffic flow and safety in smart cities. Traffic surveillance and monitoring, traffic flow optimization, emergency response, public safety, parking management, environmental monitoring, traffic surveys, event and congestion management, infrastructure inspection, and public transport support are some ways in which UAVs can be used for traffic management in smart cities. Collaborations between government agencies, law enforcement, transportation departments, and drone operators are essential for the successful integration of UAVs into the smart city infrastructure. Additionally, advanced technologies like artificial intelligence and machine learning can be used to process and analyze the vast amounts of data collected by drones, allowing for more proactive and efficient traffic management in smart cities.
- 26 April 2024
- Published by IGI Global Scientific Publishing
- p. 226-248
Modern-Day Healthcare With Cloud-Enhanced Robotics
Modern healthcare is undergoing a transformative evolution with the integration of cloud computing and robotics. This chapter delves into the convergence of these two technologies, defining and exploring the concept of cloud-enhanced robotics in healthcare. Through real-world case studies, the chapter highlights the wide array of applications for cloud-enhanced robotics, such as telemedicine, diagnostics, and data analytics, and how they are enhancing patient care. The benefits of cloud-enhanced robotics are manifold, including improved patient outcomes, enhanced precision, cost reduction, and increased access to expertise. This chapter explores both the advantages and challenges, offering insights into the potential future developments of cloud-enhanced robotics in healthcare. Request access from your librarian to read this chapter's full text.
- 26 April 2024
- Published by IGI Global Scientific Publishing
- p. 226-248
Modern-Day Healthcare With Cloud-Enhanced Robotics
Modern healthcare is undergoing a transformative evolution with the integration of cloud computing and robotics. This chapter delves into the convergence of these two technologies, defining and exploring the concept of cloud-enhanced robotics in healthcare. Through real-world case studies, the chapter highlights the wide array of applications for cloud-enhanced robotics, such as telemedicine, diagnostics, and data analytics, and how they are enhancing patient care. The benefits of cloud-enhanced robotics are manifold, including improved patient outcomes, enhanced precision, cost reduction, and increased access to expertise. This chapter explores both the advantages and challenges, offering insights into the potential future developments of cloud-enhanced robotics in healthcare. Request access from your librarian to read this chapter's full text.
- 5 December 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (1) , 1327-1341
Synthesis of biogenic cerium oxide-supported osmium oxide nanoalloy from Oldenlandia umbellata L. plant extract for pharmacological applications
- 5 December 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (1) , 1327-1341
Synthesis of biogenic cerium oxide-supported osmium oxide nanoalloy from Oldenlandia umbellata L. plant extract for pharmacological applications
- 3 October 2023
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 37 (12)
Synthesis of nickel oxide nanoparticles from Enicostemma littorale plant extract and investigation of their photocatalytic and antimicrobial properties
Nickel oxide nanoparticles (NiOxi‐NPs) with a spherical shape have been developed using a green aqueous extract of the Enicostemma littorale plant, and their efficacy on various photochemical and biological applications like antibacterial and anticancer has been studied. The intense vibrational bands in the Fourier transformer infrared spectroscopy (FT‐IR) spectrum correspond to Ni‐O, C=O, and O‐H, confirming the formation of NiOxi‐NP. Also, two intense peaks at 2θ = 36.42° (111) and 42.87° (200) in the X‐ray diffraction (XRD) spectrum confirm the NiOxi‐NP crystal lattice as face center cubic (FCC). To determine the light‐absorbing behavior and shape of the newly produced NiOxi‐NP, UV‐visible, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) investigations were performed. NiOxi‐NP has a maximal distinctive UV‐visible absorption wavelength in the 306‐nm region. The nickel oxide nanoparticles are formed in spherical form and dispersed in the 33‐ to 46‐nm size range, according to the SEM and TEM investigations. According to the 3‐(4,5‐dimethyl thiazolyl‐2)‐2,5‐diphenyltetrazolium bromide (MTT) assay, the Michigan Cancer Foundation‐7 (MCF‐7) breast tumor cancer cell line is extremely responsive to the green NiOxi‐NPs' exceptional lethal effectiveness. The IC50 value for MCF‐7 cell lines is 12.87 μg/mL. When tested against bacteria such as Bacillus subtilis, Staphylococcus, and Escherichia coli stains, the aforementioned particles demonstrate greater activity on the three bacteria. The photocatalytic activity of the greenery NiOxi‐NP over the dye rhodamine B (RBD) was finished in 16 min when the solution concentration was 0.025 mg/L. The green synthesis of NiOxi‐NP nanoparticles can behave as a better UV‐visible screener between 290 and 450 nm, a better antimicrobial agent, a better RBD degradation agent, and a better low‐dose anticancer agent.
- 3 October 2023
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 37 (12)
Synthesis of nickel oxide nanoparticles from Enicostemma littorale plant extract and investigation of their photocatalytic and antimicrobial properties
Nickel oxide nanoparticles (NiOxi‐NPs) with a spherical shape have been developed using a green aqueous extract of the Enicostemma littorale plant, and their efficacy on various photochemical and biological applications like antibacterial and anticancer has been studied. The intense vibrational bands in the Fourier transformer infrared spectroscopy (FT‐IR) spectrum correspond to Ni‐O, C=O, and O‐H, confirming the formation of NiOxi‐NP. Also, two intense peaks at 2θ = 36.42° (111) and 42.87° (200) in the X‐ray diffraction (XRD) spectrum confirm the NiOxi‐NP crystal lattice as face center cubic (FCC). To determine the light‐absorbing behavior and shape of the newly produced NiOxi‐NP, UV‐visible, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) investigations were performed. NiOxi‐NP has a maximal distinctive UV‐visible absorption wavelength in the 306‐nm region. The nickel oxide nanoparticles are formed in spherical form and dispersed in the 33‐ to 46‐nm size range, according to the SEM and TEM investigations. According to the 3‐(4,5‐dimethyl thiazolyl‐2)‐2,5‐diphenyltetrazolium bromide (MTT) assay, the Michigan Cancer Foundation‐7 (MCF‐7) breast tumor cancer cell line is extremely responsive to the green NiOxi‐NPs' exceptional lethal effectiveness. The IC50 value for MCF‐7 cell lines is 12.87 μg/mL. When tested against bacteria such as Bacillus subtilis, Staphylococcus, and Escherichia coli stains, the aforementioned particles demonstrate greater activity on the three bacteria. The photocatalytic activity of the greenery NiOxi‐NP over the dye rhodamine B (RBD) was finished in 16 min when the solution concentration was 0.025 mg/L. The green synthesis of NiOxi‐NP nanoparticles can behave as a better UV‐visible screener between 290 and 450 nm, a better antimicrobial agent, a better RBD degradation agent, and a better low‐dose anticancer agent.
- 14 August 2023
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 34 (23) , 1-16
Hybrid metal complex with TiO2/SiO2 composite-doped polymer for the enhancement of photo energy conversion in silicon solar panels
- 14 August 2023
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 34 (23) , 1-16
Hybrid metal complex with TiO2/SiO2 composite-doped polymer for the enhancement of photo energy conversion in silicon solar panels
- 4 July 2023
- Published by Walter de Gruyter GmbH in International Polymer Processing
Experimental analysis of localized hybridization by means of adding woven polyester strip
Natural fiber-reinforced composites must be hybridized with synthetic fibers to enhance their mechanical strength. They are appropriate for structural applications after hybridizing with more than 40 % of synthetic fibers. The hybrid composite becomes a partly biodegradable material due to the blend of natural fibers. The localized hybridization approach has been used to minimize the quantity of synthetic fiber used in hybridization. The region around the drilled hole of a composite has been identified as stress concentrated region. In that stress-concentrated region, a polyester strip of different widths is deployed to reinforce it to reduce the delamination occurrence. The present work deals with Jute Fiber reinforced unsaturated polyester resin with local hybridization of woven polyester made up of Perma Core T-18 polyester fiber strands. The interfacial shear and tensile strengths are evaluated for the proposed composite. The results revealed that the yield strength of the proposed composite increased from 18.32 MPa to 29.62 MPa due to local hybridization. The increment of 69.24 % in yield strength is more significant for structural applications.
- 4 July 2023
- Published by Walter de Gruyter GmbH in International Polymer Processing
Experimental analysis of localized hybridization by means of adding woven polyester strip
Natural fiber-reinforced composites must be hybridized with synthetic fibers to enhance their mechanical strength. They are appropriate for structural applications after hybridizing with more than 40 % of synthetic fibers. The hybrid composite becomes a partly biodegradable material due to the blend of natural fibers. The localized hybridization approach has been used to minimize the quantity of synthetic fiber used in hybridization. The region around the drilled hole of a composite has been identified as stress concentrated region. In that stress-concentrated region, a polyester strip of different widths is deployed to reinforce it to reduce the delamination occurrence. The present work deals with Jute Fiber reinforced unsaturated polyester resin with local hybridization of woven polyester made up of Perma Core T-18 polyester fiber strands. The interfacial shear and tensile strengths are evaluated for the proposed composite. The results revealed that the yield strength of the proposed composite increased from 18.32 MPa to 29.62 MPa due to local hybridization. The increment of 69.24 % in yield strength is more significant for structural applications.
- 3 July 2023
- Published by Walter de Gruyter GmbH in International Polymer Processing
- Vol. 38 (5) , 539-550
Mechanical strength enhancement of natural fibre composites via localized hybridization with stitch reinforcement
Stress concentration is an unavoidable phenomenon during the fabrication of composite structures. This research focuses on reducing stress concentration. Circular holes made on the composite structural member induce stress-concentrated regions. These stress-concentrated regions around the circular hole (considered as a weak section) were strengthened by adding synthetic fibre (local hybridization) in the form of fibre stitches (locked loop stitch). Through conducting a single fibre pull-out test, the present study analysed the impact of incorporating synthetic fibres in stitch form and the enhancement of Interfacial Shear Strength (IFSS). The load acting on the broken warp fibres is distributed to the broken weft fibres when the number of concentric stitches increases. The increment of concentric stitches resulted in the increase of IFSS due to localized hybridization. The tensile test results also show a significant improvement with 110 Nmm axial fastening force, from 6.749 MPa (for the natural fibre composite) to 76.91 MPa (for locally hybridized with eight concentric stitches). A simple bolted lap joint with local hybridization around the hole has been evaluated for different clamp-up forces. The best combinations of the clamp-up force and the extent of hybridization have been identified. SEM images illustrate the reduced voids and the reduced fibre pull-out due to the local hybridization around delamination-prone areas.
- 3 July 2023
- Published by Walter de Gruyter GmbH in International Polymer Processing
- Vol. 38 (5) , 539-550
Mechanical strength enhancement of natural fibre composites via localized hybridization with stitch reinforcement
Stress concentration is an unavoidable phenomenon during the fabrication of composite structures. This research focuses on reducing stress concentration. Circular holes made on the composite structural member induce stress-concentrated regions. These stress-concentrated regions around the circular hole (considered as a weak section) were strengthened by adding synthetic fibre (local hybridization) in the form of fibre stitches (locked loop stitch). Through conducting a single fibre pull-out test, the present study analysed the impact of incorporating synthetic fibres in stitch form and the enhancement of Interfacial Shear Strength (IFSS). The load acting on the broken warp fibres is distributed to the broken weft fibres when the number of concentric stitches increases. The increment of concentric stitches resulted in the increase of IFSS due to localized hybridization. The tensile test results also show a significant improvement with 110 Nmm axial fastening force, from 6.749 MPa (for the natural fibre composite) to 76.91 MPa (for locally hybridized with eight concentric stitches). A simple bolted lap joint with local hybridization around the hole has been evaluated for different clamp-up forces. The best combinations of the clamp-up force and the extent of hybridization have been identified. SEM images illustrate the reduced voids and the reduced fibre pull-out due to the local hybridization around delamination-prone areas.
- 16 June 2023
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 37 (10)
Biosynthesis of a tri‐metallic nanoalloy for magnetic and biomedical applications
The tri‐metallic magnetic nanoalloy synthesized via the eco‐friendly procedure discussed here contains cobalt (Co), nickel (Ni), and zirconium (Zr) metals in a 3:1:1 M ratio (Co3O4.NiO.ZrO2 nanoalloy). Two different plant extracts which are rich in biologically active compounds from Spermacoce hispida and Vernonia cinereum were combined to get a multispecies nanoalloy with magnetic properties and medicinal values. The Fourier transform infrared, X‐ray diffraction, and transmission and scanning electron microscopes analyses confirmed the spherical shape of the bioinspired Co3O4.NiO.ZrO2 nanoalloy. The average size of our nanoalloy was 32 nm, but the individual nanoparticles are between 21 and 73 nm in size. A vibrating sample magnetometer study of the magnetic characteristics of the nanoalloy reveals strong saturation magnetization (12.42 emu/g), low retentivity (Mr), and low coercivity (Hc) (282.36 Oe). The higher saturation magnetization in nanoalloy is attributed to their larger particle size, a high degree of crystalline structure, and slight external spinning deformation. The low coercive field (Hc) value reveals the unique soft nature of our nanoalloy. The disc diffusion study confirms that a 6.3 μg/mL solution of the nanoalloy kills almost 96% of the harmful bacteria like Bacillus subtilis (29 mm), Bacillus cereus (26 mm), and Escherichia coli (21 mm). It shows a moderate effect of 85% killing factor against Staphylococcus albus (17 mm), Pseudomonas aeruginosa (13 mm), and Klebsiella pneumoniae (15 mm) bacteria.
- 16 June 2023
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 37 (10)
Biosynthesis of a tri‐metallic nanoalloy for magnetic and biomedical applications
The tri‐metallic magnetic nanoalloy synthesized via the eco‐friendly procedure discussed here contains cobalt (Co), nickel (Ni), and zirconium (Zr) metals in a 3:1:1 M ratio (Co3O4.NiO.ZrO2 nanoalloy). Two different plant extracts which are rich in biologically active compounds from Spermacoce hispida and Vernonia cinereum were combined to get a multispecies nanoalloy with magnetic properties and medicinal values. The Fourier transform infrared, X‐ray diffraction, and transmission and scanning electron microscopes analyses confirmed the spherical shape of the bioinspired Co3O4.NiO.ZrO2 nanoalloy. The average size of our nanoalloy was 32 nm, but the individual nanoparticles are between 21 and 73 nm in size. A vibrating sample magnetometer study of the magnetic characteristics of the nanoalloy reveals strong saturation magnetization (12.42 emu/g), low retentivity (Mr), and low coercivity (Hc) (282.36 Oe). The higher saturation magnetization in nanoalloy is attributed to their larger particle size, a high degree of crystalline structure, and slight external spinning deformation. The low coercive field (Hc) value reveals the unique soft nature of our nanoalloy. The disc diffusion study confirms that a 6.3 μg/mL solution of the nanoalloy kills almost 96% of the harmful bacteria like Bacillus subtilis (29 mm), Bacillus cereus (26 mm), and Escherichia coli (21 mm). It shows a moderate effect of 85% killing factor against Staphylococcus albus (17 mm), Pseudomonas aeruginosa (13 mm), and Klebsiella pneumoniae (15 mm) bacteria.