Maharani Dewi Solikhah
Research Subjects
Maharani Dewi Solikhah has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
A Kismanto
Agency for the Assessment and Application of Technology, Build. 480 PUSPIPTEK, Tangerang Selatan 15314 Indonesia
2 shared publicationsAgus Kismanto
2 shared publicationsF Karuana
Agency for the Assessment and Application of Technology, Build. 480 PUSPIPTEK, Tangerang Selatan 15314 Indonesia
2 shared publicationsF T Pratiwi
Agency for the Assessment and Application of Technology, Build. 480 PUSPIPTEK, Tangerang Selatan 15314 Indonesia
2 shared publicationsY Heryana
Agency for the Assessment and Application of Technology, Build. 480 PUSPIPTEK, Tangerang Selatan 15314 Indonesia
2 shared publicationsYoga Peryoga
Agency for the Assessment and Application of Technology, Build. 480, PUSPIPTEK, Tangerang Selatan 15314, Indonesia
2 shared publications
Latest Publications
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2646 (1)
Cold start ability test for diesel passenger cars using thirty percent palm biodiesel and precipitation in low temperature ambient
Based on the Indonesian road map on achieving renewable energy fuels, the use of 30% palm biodiesel (B30) with mono-glyceride contents of 0.5% maximum has been applied nationally. Determination of this mono-glyceride value is to prevent biodiesel precipitation if it is exposed to low temperatures, moreover the excessive precipitate formed can block a fuel filter. Blocking fuel filter cause a vehicle difficult to be started. Cold start ability of the use B30 and precipitation tests in low temperatures ambient is one of considerations of the government's decision. The cold start ability test used diesel passenger vehicles fuelled by B30, while the precipitation test used samples of B30 which were placed in an open area close to cloud point temperature of palm biodiesel. After soaking for 3 to 21 days, the test vehicles fuelled by B30 with mono-glyceride content of 0.5% and 0.4 % can be turned on around 1 second as well as fuelled by pure diesel. The precipitation of B30 0.5% mono-glyceride content was higher than 0.4% mono-glyceride content ones. While, the pure diesel took the lowest place. The variation of soaking time didn't effect on the precipitate formed of the test fuels.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2646 (1)
Open AccessCold start ability test for diesel passenger cars using thirty percent palm biodiesel and precipitation in low temperature ambient
Based on the Indonesian road map on achieving renewable energy fuels, the use of 30% palm biodiesel (B30) with mono-glyceride contents of 0.5% maximum has been applied nationally. Determination of this mono-glyceride value is to prevent biodiesel precipitation if it is exposed to low temperatures, moreover the excessive precipitate formed can block a fuel filter. Blocking fuel filter cause a vehicle difficult to be started. Cold start ability of the use B30 and precipitation tests in low temperatures ambient is one of considerations of the government's decision. The cold start ability test used diesel passenger vehicles fuelled by B30, while the precipitation test used samples of B30 which were placed in an open area close to cloud point temperature of palm biodiesel. After soaking for 3 to 21 days, the test vehicles fuelled by B30 with mono-glyceride content of 0.5% and 0.4 % can be turned on around 1 second as well as fuelled by pure diesel. The precipitation of B30 0.5% mono-glyceride content was higher than 0.4% mono-glyceride content ones. While, the pure diesel took the lowest place. The variation of soaking time didn't effect on the precipitate formed of the test fuels.
- Open Access
- 30 May 2019
- Published by Masyarakat Perkelapasawitan Indonesia in International Journal of Oil Palm
- Vol. 2 (2) , 53-60
Second Generation Biodiesel Production from Upgrading of Palm-Based Bio-Oil: Technology Study through Process Simulation
Biodiesel has become favorable fuel for diesel fuel substitute to overcome the limited fossil fuel resources while facing the increasing of energy consumption. However, the use of FAME biodiesel is currently limited to mixing up to 30%. Therefore, it is necessary to consider other fuels as an alternative to diesel oil. One of them is by developing second generation biodiesel, which produced from the upgrading process of bio-oil as a result of pyrolysis. Bio-oil can be upgraded to fuel with range naphtha through two main processes that consisted of hydro-processing and catalytic cracking. Techno-economic studies on bio-oil production from oil palm biomass have been studied but the techno-economic studies up to upgraded bio-oil have not included. Before a techno-economic study was carried out, it was necessary to select the process technology route of upgrading bio-oil. Therefore, it is required to conduct a study of industry and the comparison of second generation biodiesel production technology from the upgrading of oil palm-based bio-oil to obtain an optimum process flow diagram. Process simulations were conducted using ChemCad software so that the mass balance and ratio of energy consumption was obtained. This work estimated the biofuel produced from palm residues collected from 19 units of a 60 tons/hour palm oil mill. The bio-oil input is 70.35 tons/hours with upgrading oil yield of 32.21%. The energy yield of this model is 35.7% while required 76.5 MMJ/hour of the energy. The energy required for this process can be provided by an integrated fuel upgrading facilities that connected with the palm bio-oil production plant could provide self-sustainable production facilities.
- 30 May 2019
- Published by Masyarakat Perkelapasawitan Indonesia in International Journal of Oil Palm
- Vol. 2 (2) , 53-60
Open AccessSecond Generation Biodiesel Production from Upgrading of Palm-Based Bio-Oil: Technology Study through Process Simulation
Biodiesel has become favorable fuel for diesel fuel substitute to overcome the limited fossil fuel resources while facing the increasing of energy consumption. However, the use of FAME biodiesel is currently limited to mixing up to 30%. Therefore, it is necessary to consider other fuels as an alternative to diesel oil. One of them is by developing second generation biodiesel, which produced from the upgrading process of bio-oil as a result of pyrolysis. Bio-oil can be upgraded to fuel with range naphtha through two main processes that consisted of hydro-processing and catalytic cracking. Techno-economic studies on bio-oil production from oil palm biomass have been studied but the techno-economic studies up to upgraded bio-oil have not included. Before a techno-economic study was carried out, it was necessary to select the process technology route of upgrading bio-oil. Therefore, it is required to conduct a study of industry and the comparison of second generation biodiesel production technology from the upgrading of oil palm-based bio-oil to obtain an optimum process flow diagram. Process simulations were conducted using ChemCad software so that the mass balance and ratio of energy consumption was obtained. This work estimated the biofuel produced from palm residues collected from 19 units of a 60 tons/hour palm oil mill. The bio-oil input is 70.35 tons/hours with upgrading oil yield of 32.21%. The energy yield of this model is 35.7% while required 76.5 MMJ/hour of the energy. The energy required for this process can be provided by an integrated fuel upgrading facilities that connected with the palm bio-oil production plant could provide self-sustainable production facilities.
- Open Access
- 1 April 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 349 (1) , 012035
Characterization of Bio-Oil from Fast Pyrolysis of Palm Frond and Empty Fruit Bunch
- 1 April 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 349 (1) , 012035
Open AccessCharacterization of Bio-Oil from Fast Pyrolysis of Palm Frond and Empty Fruit Bunch
- Open Access
- 1 May 2017
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 65 (1) , 012014
Development of bio-fuel from palm frond via fast pyrolysis
In order to fulfill the fuel demand in the future, Indonesia has to find a sustainable alternative for its energy. Energy source in the form of biomass is a promising alternative since its availability is abundance in this tropical country. Biomass can be converted into liquid fuel via fast pyrolysis by contacting the solid biomass into hot medium in the absence of oxygen. Hot sand is the common heat carrier for fast pyrolysis purposes but it is very abrasive and required high pyrolysis temperature (450–600 °C). This paper will discuss on the equipment design and experiment of fast pyrolysis of palm frond using high boiling point thermal oil as heat carrier. Experiments show that by using thermal oil as heat carrier, bio-oil can be produced at lower pyrolysis temperature of 350 °C, compared to the one using hot sand as heating carrier. The yield of bio-oil production is 36.4 % of biomass feeding. The water content of bio-oil is 52.77 % mass while heating value is 10.25 MJ/kg.
- 1 May 2017
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 65 (1) , 012014
Open AccessDevelopment of bio-fuel from palm frond via fast pyrolysis
In order to fulfill the fuel demand in the future, Indonesia has to find a sustainable alternative for its energy. Energy source in the form of biomass is a promising alternative since its availability is abundance in this tropical country. Biomass can be converted into liquid fuel via fast pyrolysis by contacting the solid biomass into hot medium in the absence of oxygen. Hot sand is the common heat carrier for fast pyrolysis purposes but it is very abrasive and required high pyrolysis temperature (450–600 °C). This paper will discuss on the equipment design and experiment of fast pyrolysis of palm frond using high boiling point thermal oil as heat carrier. Experiments show that by using thermal oil as heat carrier, bio-oil can be produced at lower pyrolysis temperature of 350 °C, compared to the one using hot sand as heating carrier. The yield of bio-oil production is 36.4 % of biomass feeding. The water content of bio-oil is 52.77 % mass while heating value is 10.25 MJ/kg.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1855, 070005
Profitability and sustainability of small - medium scale palm biodiesel plant
The mandatory of biodiesel application at 20% blending (B20) has been started since January 2016. It creates huge market for biodiesel industry. To build large-scale biodiesel plant (> 100,000 tons/year) is most favorable for biodiesel producers since it can give lower production cost. This cost becomes a challenge for small - medium scale biodiesel plants. However, current biodiesel plants in Indonesia are located mainly in Java and Sumatra, which then distribute biodiesel around Indonesia so that there is an additional cost for transportation from area to area. This factor becomes an opportunity for the small - medium scale biodiesel plants to compete with the large one. This paper discusses the profitability of small - medium scale biodiesel plants conducted on a capacity of 50 tons/day using CPO and its derivatives. The study was conducted by performing economic analysis between scenarios of biodiesel plant that using raw material of stearin, PFAD, and multi feedstock. Comparison on the feasibility of scenarios was also conducted on the effect of transportation cost and selling price. The economic assessment shows that profitability is highly affected by raw material price so that it is important to secure the source of raw materials and consider a multi-feedstock type for small - medium scale biodiesel plants to become a sustainable plant. It was concluded that the small - medium scale biodiesel plants will be profitable and sustainable if they are connected to palm oil mill, have a captive market, and are located minimally 200 km from other biodiesel plants. The use of multi feedstock could increase IRR from 18.68 % to 56.52 %.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1855, 070005
Profitability and sustainability of small - medium scale palm biodiesel plant
The mandatory of biodiesel application at 20% blending (B20) has been started since January 2016. It creates huge market for biodiesel industry. To build large-scale biodiesel plant (> 100,000 tons/year) is most favorable for biodiesel producers since it can give lower production cost. This cost becomes a challenge for small - medium scale biodiesel plants. However, current biodiesel plants in Indonesia are located mainly in Java and Sumatra, which then distribute biodiesel around Indonesia so that there is an additional cost for transportation from area to area. This factor becomes an opportunity for the small - medium scale biodiesel plants to compete with the large one. This paper discusses the profitability of small - medium scale biodiesel plants conducted on a capacity of 50 tons/day using CPO and its derivatives. The study was conducted by performing economic analysis between scenarios of biodiesel plant that using raw material of stearin, PFAD, and multi feedstock. Comparison on the feasibility of scenarios was also conducted on the effect of transportation cost and selling price. The economic assessment shows that profitability is highly affected by raw material price so that it is important to secure the source of raw materials and consider a multi-feedstock type for small - medium scale biodiesel plants to become a sustainable plant. It was concluded that the small - medium scale biodiesel plants will be profitable and sustainable if they are connected to palm oil mill, have a captive market, and are located minimally 200 km from other biodiesel plants. The use of multi feedstock could increase IRR from 18.68 % to 56.52 %.
- Open Access
- 10 December 2014
- Published by Insight Society in International Journal on Advanced Science, Engineering and Information Technology
- Vol. 4 (6) , 394-400
Production Cost Assessment of Palm Empty Fruit Bunch Conversion to Bio-Oil via Fast Pyrolysis
Production Cost Assessment of Palm Empty Fruit Bunch Conversion to Bio-Oil via Fast Pyrolysis
- 10 December 2014
- Published by Insight Society in International Journal on Advanced Science, Engineering and Information Technology
- Vol. 4 (6) , 394-400
Open AccessProduction Cost Assessment of Palm Empty Fruit Bunch Conversion to Bio-Oil via Fast Pyrolysis
Production Cost Assessment of Palm Empty Fruit Bunch Conversion to Bio-Oil via Fast Pyrolysis