Arno Fallast
Arno Fallast has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- A. R. Rapf
Institute of Aviation, FH JOANNEUM University of Applied Sciences, Graz, Austria
1 shared publication - Alexander G. Mirnig
Center for Technology Experience, AIT Austrian Institute of Technology, Vienna, Austria
1 shared publication - Andreas Tramposch
Aviation, University of Applied Sciences FH JOANNEUM GesmbH, Graz, Austria
1 shared publication - Bernd Messnarz
FH Joanneum University of Applied Sciences
1 shared publication - Lenart Motnikar
Center for Technology Experience, AIT Austrian Institute of Technology, Austria
1 shared publication - Lukas Kroeninger
Center for Technology Experience, Austrian Institute of Technology GmbH, Vienna, Austria
1 shared publication
Latest Publications
- Open Access
- 18 September 2023
- Published by Association for Computing Machinery (ACM)
- p. 317-319
Unravelling User Perspectives on Automated Urban Air Mobility: A Virtual Reality Approach
- 18 September 2023
- Published by Association for Computing Machinery (ACM)
- p. 317-319
Open AccessUnravelling User Perspectives on Automated Urban Air Mobility: A Virtual Reality Approach
- Open Access
- 13 November 2021
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 13 (1) , 181-198
Kinetic and thermal simulation of water droplets in icing wind tunnels
Within the certification process of aircraft, tests under specific icing conditions are required. For such safety relevant tests—which are performed under defined and repeatable test conditions—specially equipped Icing Wind Tunnels (IWT) are required. In such IWTs, supercooled water droplets are created with the aid of a spray system injecting pre-tempered water droplets of specific diameters into the free stream air flow. Especially tests with a droplet size up to 2mm (Supercooled Large Droplets - SLDs) are of great importance. SLDs are difficult to generate under laboratory conditions in IWT since usually the available droplet flight time from the injection location to the impact position on the test object is insufficient to reliably cool down a droplet at least to freezing temperature. To investigate the limitations associated with the application of SLD, the current work provides a method to allow detailed insight into the behavior of droplets on the path from the injection spray nozzle to the test section. In this work a state space model of a single droplet is derived that combines the kinetic aspects, thermal properties as well as the governing differential equations for motion, convective heat transfer at the droplet surface and heat conduction inside the droplet. Beside the states for the droplet’s position and velocity in space, the state space vector comprises various fluid and thermodynamic parameters. The droplet-internal temperature distribution is modelled by a discrete one-dimensional spherical shell model that also incorporates the aggregate phase (freezing mass fraction) at each shell node. This approach allows, therefore, the simulation of potential droplet phase change processes (freezing/melting) as well. With the model at hand, the influence of various boundary conditions (initial droplet temperature, flow field, ambient air temperature, etc.) can be determined and evaluated. As a result, concrete measures to achieve a desired operating condition (e.g. droplet temperature at the test object) for various model assumptions can be derived. In addition, the simulation model facilitates the prediction of the droplet diameter threshold for ensuring a supercooled state upon the impact on the test object. The governing theoretical influences are described, and various simulation results for representative test conditions that occur at the Rail-Tec-Arsenal (RTA) in Vienna are presented.
- 13 November 2021
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 13 (1) , 181-198
Open AccessKinetic and thermal simulation of water droplets in icing wind tunnels
Within the certification process of aircraft, tests under specific icing conditions are required. For such safety relevant tests—which are performed under defined and repeatable test conditions—specially equipped Icing Wind Tunnels (IWT) are required. In such IWTs, supercooled water droplets are created with the aid of a spray system injecting pre-tempered water droplets of specific diameters into the free stream air flow. Especially tests with a droplet size up to 2mm (Supercooled Large Droplets - SLDs) are of great importance. SLDs are difficult to generate under laboratory conditions in IWT since usually the available droplet flight time from the injection location to the impact position on the test object is insufficient to reliably cool down a droplet at least to freezing temperature. To investigate the limitations associated with the application of SLD, the current work provides a method to allow detailed insight into the behavior of droplets on the path from the injection spray nozzle to the test section. In this work a state space model of a single droplet is derived that combines the kinetic aspects, thermal properties as well as the governing differential equations for motion, convective heat transfer at the droplet surface and heat conduction inside the droplet. Beside the states for the droplet’s position and velocity in space, the state space vector comprises various fluid and thermodynamic parameters. The droplet-internal temperature distribution is modelled by a discrete one-dimensional spherical shell model that also incorporates the aggregate phase (freezing mass fraction) at each shell node. This approach allows, therefore, the simulation of potential droplet phase change processes (freezing/melting) as well. With the model at hand, the influence of various boundary conditions (initial droplet temperature, flow field, ambient air temperature, etc.) can be determined and evaluated. As a result, concrete measures to achieve a desired operating condition (e.g. droplet temperature at the test object) for various model assumptions can be derived. In addition, the simulation model facilitates the prediction of the droplet diameter threshold for ensuring a supercooled state upon the impact on the test object. The governing theoretical influences are described, and various simulation results for representative test conditions that occur at the Rail-Tec-Arsenal (RTA) in Vienna are presented.
- Open Access
- 30 June 2017
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 8 (3) , 481-492
Automated trajectory generation and airport selection for an emergency landing procedure of a CS23 aircraft
- 30 June 2017
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 8 (3) , 481-492
Open AccessAutomated trajectory generation and airport selection for an emergency landing procedure of a CS23 aircraft