Jingnan Tong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jingnan Tong has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Bram Hoex
School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, NSW, Australia
2 shared publications - Alexander J. Baldacchino
School of Physics, UNSW Sydney, NSW 2052, Australia
1 shared publication Alexander To
School of Photovoltaic and Renewable Energy Engineering (SPREE)
1 shared publication- Alison Ciesla
UNSW Sydney
1 shared publication Alison Lennon
School of Photovoltaic and Renewable Energy Engineering (SPREE)
1 shared publication- Alison Lennon
School of Photovoltaic and Renewable Energy Engineering, The University of New South Wales, Sydney, NSW 2052, Australia
1 shared publication
Latest Publications
- Open Access
- 1 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Singlet Fission c-Si Solar Cells: Beyond Tetracene
Singlet fission photovoltaics enable the extraction of two electron-hole pairs from each higher-energy photon while leveraging a mature technology such as crystalline silicon (c-Si) as the underlying cell. Significant steps have been made in the development of singlet fission silicon photovoltaics, but all examples reported to date use tetracene as the singlet fission material. Tetracene is photochemically unstable and therefore unsuitable for commercial applications. Here we demonstrate singlet fission-derived triplet exciton transfer to c-Si from photochemically stable dipyrrolonaphthyridinedione (DPND) derivatives, with a thin layer of tin oxide as the passivation layer. An overlayer of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) was found to improve interface passivation further. These observations demonstrate that singlet fission photovoltaic devices can be made using stable and commercially viable materials.
- 1 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessSinglet Fission c-Si Solar Cells: Beyond Tetracene
Singlet fission photovoltaics enable the extraction of two electron-hole pairs from each higher-energy photon while leveraging a mature technology such as crystalline silicon (c-Si) as the underlying cell. Significant steps have been made in the development of singlet fission silicon photovoltaics, but all examples reported to date use tetracene as the singlet fission material. Tetracene is photochemically unstable and therefore unsuitable for commercial applications. Here we demonstrate singlet fission-derived triplet exciton transfer to c-Si from photochemically stable dipyrrolonaphthyridinedione (DPND) derivatives, with a thin layer of tin oxide as the passivation layer. An overlayer of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) was found to improve interface passivation further. These observations demonstrate that singlet fission photovoltaic devices can be made using stable and commercially viable materials.
- Open Access
Tunnel Oxides Formed by Field-Induced Anodisation for Passivated Contacts of Silicon Solar Cells
Tunnel silicon oxides form a critical component for passivated contacts for silicon solar cells. They need to be sufficiently thin to allow carriers to tunnel through and to be uniform both in thickness and stoichiometry across the silicon wafer surface, to ensure uniform and low recombination velocities if high conversion efficiencies are to be achieved. This paper reports on the formation of ultra-thin silicon oxide layers by field-induced anodisation (FIA), a process that ensures uniform oxide thickness by passing the anodisation current perpendicularly through the wafer to the silicon surface that is anodised. Spectroscopical analyses show that the FIA oxides contain a lower fraction of Si-rich sub-oxides compared to wet-chemical oxides, resulting in lower recombination velocities at the silicon and oxide interface. This property along with its low temperature formation highlights the potential for FIA to be used to form low-cost tunnel oxide layers for passivated contacts of silicon solar cells.
Open AccessTunnel Oxides Formed by Field-Induced Anodisation for Passivated Contacts of Silicon Solar Cells
Tunnel silicon oxides form a critical component for passivated contacts for silicon solar cells. They need to be sufficiently thin to allow carriers to tunnel through and to be uniform both in thickness and stoichiometry across the silicon wafer surface, to ensure uniform and low recombination velocities if high conversion efficiencies are to be achieved. This paper reports on the formation of ultra-thin silicon oxide layers by field-induced anodisation (FIA), a process that ensures uniform oxide thickness by passing the anodisation current perpendicularly through the wafer to the silicon surface that is anodised. Spectroscopical analyses show that the FIA oxides contain a lower fraction of Si-rich sub-oxides compared to wet-chemical oxides, resulting in lower recombination velocities at the silicon and oxide interface. This property along with its low temperature formation highlights the potential for FIA to be used to form low-cost tunnel oxide layers for passivated contacts of silicon solar cells.
- 5 July 2017
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 56 (8S2) , 08MB12
Unintentional consequences of dual mode plasma reactors: Implications for upscaling lab-record silicon surface passivation by silicon nitride
Silicon nitride (SiN x ) synthesised by low-temperature plasma enhanced chemical vapour deposition (PECVD) is the most extensively used antireflection coating for crystalline silicon solar cells because of its tunable refractive index in combination with excellent levels of surface and bulk passivation. This has attracted a significant amount of research on developing SiN x films towards an optimal electrical and optical performance. Typically, recipes are first optimised in lab-scale reactors and subsequently, the best settings are transferred to high-throughput reactors. In this paper, we show that for one particular, but widely used, PECVD reactor configuration this upscaling is severely hampered by an important experimental artefact. Specifically, we report on the unintentional deposition of a dual layer structure in a dual mode AK 400 plasma reactor from Roth & Rau which has a significant impact on its surface passivation performance. It is found that the radio frequency (RF) substrate bias ignites an unintentional depositing plasma before the ignition of the main microwave (MW) plasma. This RF plasma deposits a Si-rich intervening SiN x layer (refractive index = 2.4) while using a recipe for stoichiometric SiN x . This layer was found to be 18 nm thick in our case and had an extraordinary impact on the Si surface passivation, witnessed by a reduction in effective surface recombination velocity from 22.5 to 6.2 cm/s. This experimental result may explain some “out of the ordinary” excellent surface passivation results reported recently for nearly stoichiometric SiN x films and has significant consequences when transferring these results to high-throughput deposition systems.
- 5 July 2017
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 56 (8S2) , 08MB12
Unintentional consequences of dual mode plasma reactors: Implications for upscaling lab-record silicon surface passivation by silicon nitride
Silicon nitride (SiN x ) synthesised by low-temperature plasma enhanced chemical vapour deposition (PECVD) is the most extensively used antireflection coating for crystalline silicon solar cells because of its tunable refractive index in combination with excellent levels of surface and bulk passivation. This has attracted a significant amount of research on developing SiN x films towards an optimal electrical and optical performance. Typically, recipes are first optimised in lab-scale reactors and subsequently, the best settings are transferred to high-throughput reactors. In this paper, we show that for one particular, but widely used, PECVD reactor configuration this upscaling is severely hampered by an important experimental artefact. Specifically, we report on the unintentional deposition of a dual layer structure in a dual mode AK 400 plasma reactor from Roth & Rau which has a significant impact on its surface passivation performance. It is found that the radio frequency (RF) substrate bias ignites an unintentional depositing plasma before the ignition of the main microwave (MW) plasma. This RF plasma deposits a Si-rich intervening SiN x layer (refractive index = 2.4) while using a recipe for stoichiometric SiN x . This layer was found to be 18 nm thick in our case and had an extraordinary impact on the Si surface passivation, witnessed by a reduction in effective surface recombination velocity from 22.5 to 6.2 cm/s. This experimental result may explain some “out of the ordinary” excellent surface passivation results reported recently for nearly stoichiometric SiN x films and has significant consequences when transferring these results to high-throughput deposition systems.