Chris Massey
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Chris Massey has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Alexandros Angfelos Taflanidis
Univ. of Notre Dame
2 shared publications - Jeffrey A. Melby
Army Engineer Research and Development Center Polytechnic of Bari Polytechnic of Bari University of Salento University of Salento
2 shared publications - Luke A. Aucoin
U.S. Army Corps of Engineers, Engineer Research and Development Center, Coastal and Hydraulics Laboratory, Vicksburg, MS 39180, USA
2 shared publications - Madison C. Yawn
U.S. Army Corps of Engineers, Engineer Research and Development Center, Coastal and Hydraulics Laboratory, Vicksburg, MS 39180, USA
2 shared publications - Mary A. Cialone
Research Hydraulic Engineer, Coastal and Hydraulics Laboratory, U.S. Army Engineer Research and Development Center, 3909 Halls Ferry Rd., Vicksburg, MS 39180
2 shared publications - Meredith L. Carr
US Army Corps of Eng. (USACE) at Galveston District US Army Research and Development Center (ERDC/CHL) US Army Research and Development Center US Army Research and Development Center
2 shared publications
Latest Publications
- Open Access
- 29 May 2025
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 38,p. 169
COASTAL HAZARDS SYSTEM: A MULTI-COMPONENT FRAMEWORK AIDING COASTAL RESILIENCY
Coastal regions within the U.S. Army Corps of Engineers (USACE) areas of responsibility are highly vulnerable to coastal storms, with more than $1 trillion in damages in the last two decades. Tropical cyclones (TCs), extratropical cyclones (XC), and other extreme storm events impose a variety of coastal hazards including storm surge, waves, rainfall, and wind, which often lead to devastating impacts to coastal communities. Compounding these events with increased storminess (e.g., frequency, intensity) and sea level rise is expected to exacerbate damages, therefore driving the need for more resilient flood and coastal storm risk management efforts to protect coastal communities, critical infrastructure, and ecosystems. The Coastal Hazards System (CHS) (https://chs.erdc.dren.mil) was developed by the USACE in direct response to the need for high quality hazard information to support coastal resiliency. CHS is a multi-agency, national scale effort for the accurate, efficient, and consistent quantification of coastal storm hazards for all U.S. coastlines and other locations of significance for national security. The primary objective of the CHS is the development and provision of high-fidelity, high-resolution probabilistic coastal storm hazard and process-based numerical modeling data covering the full probability space of coastal storm responses (e.g., storm surge, waves) for direct application in coastal engineering and risk assessment activities.
- 29 May 2025
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 38,p. 169
Open AccessCOASTAL HAZARDS SYSTEM: A MULTI-COMPONENT FRAMEWORK AIDING COASTAL RESILIENCY
Coastal regions within the U.S. Army Corps of Engineers (USACE) areas of responsibility are highly vulnerable to coastal storms, with more than $1 trillion in damages in the last two decades. Tropical cyclones (TCs), extratropical cyclones (XC), and other extreme storm events impose a variety of coastal hazards including storm surge, waves, rainfall, and wind, which often lead to devastating impacts to coastal communities. Compounding these events with increased storminess (e.g., frequency, intensity) and sea level rise is expected to exacerbate damages, therefore driving the need for more resilient flood and coastal storm risk management efforts to protect coastal communities, critical infrastructure, and ecosystems. The Coastal Hazards System (CHS) (https://chs.erdc.dren.mil) was developed by the USACE in direct response to the need for high quality hazard information to support coastal resiliency. CHS is a multi-agency, national scale effort for the accurate, efficient, and consistent quantification of coastal storm hazards for all U.S. coastlines and other locations of significance for national security. The primary objective of the CHS is the development and provision of high-fidelity, high-resolution probabilistic coastal storm hazard and process-based numerical modeling data covering the full probability space of coastal storm responses (e.g., storm surge, waves) for direct application in coastal engineering and risk assessment activities.
- Open Access
- 29 May 2025
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 38,p. 173
JOINT PROBABILITY METHOD AIDED BY METAMODEL PREDICTION FOR HURRICANE HAZARDS
The quantification of coastal hazards caused by tropical cyclones (TCs) faces challenges due to insufficient historical observations, particularly for intense hurricanes, and other data limitations. In the wake of Hurricane Katrina in 2005, a hybrid probabilistic/process-based modeling approach known as the Joint Probability Method (JPM) went through in-depth scruntinity and significant improvements, spurred by the Interagency Performance Evaluation Taskforce (IPET 2009). As a result of this forensic study, IPET developed the JPM with Optimal Sampling (JPM-OS) technique for the analysis of extreme coastal flooding resulting from hurricanes. This collaborative effort involved several U.S. federal agencies, the private sector, and academic researchers. The IPET’s JPM-OS became a standard for U.S. federal agencies, including the U.S. Army Corps of Engineers (USACE) and the Federal Emergency Management Agency (FEMA), for assessing coastal storm risks in areas susceptible to hurricanes. However, this led to the development of two distinct JPM-OS variants, each with different advantantages and limitations. Since then, JPM has informed numerous storm surge and hurricane hazard studies led by the federal government, academia, and private sector. During the last decade, considerable effort was made to address limitations of existing JPM-OS approaches. Advancements in multi-variate statistics and machine learning (ML) led to the development of a more robust version of the JPM called JPM Aided by Metamodel Prediction (JPM-AMP).
- 29 May 2025
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 38,p. 173
Open AccessJOINT PROBABILITY METHOD AIDED BY METAMODEL PREDICTION FOR HURRICANE HAZARDS
The quantification of coastal hazards caused by tropical cyclones (TCs) faces challenges due to insufficient historical observations, particularly for intense hurricanes, and other data limitations. In the wake of Hurricane Katrina in 2005, a hybrid probabilistic/process-based modeling approach known as the Joint Probability Method (JPM) went through in-depth scruntinity and significant improvements, spurred by the Interagency Performance Evaluation Taskforce (IPET 2009). As a result of this forensic study, IPET developed the JPM with Optimal Sampling (JPM-OS) technique for the analysis of extreme coastal flooding resulting from hurricanes. This collaborative effort involved several U.S. federal agencies, the private sector, and academic researchers. The IPET’s JPM-OS became a standard for U.S. federal agencies, including the U.S. Army Corps of Engineers (USACE) and the Federal Emergency Management Agency (FEMA), for assessing coastal storm risks in areas susceptible to hurricanes. However, this led to the development of two distinct JPM-OS variants, each with different advantantages and limitations. Since then, JPM has informed numerous storm surge and hurricane hazard studies led by the federal government, academia, and private sector. During the last decade, considerable effort was made to address limitations of existing JPM-OS approaches. Advancements in multi-variate statistics and machine learning (ML) led to the development of a more robust version of the JPM called JPM Aided by Metamodel Prediction (JPM-AMP).
- Open Access
- 1 September 2023
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 37,p. 5
SUITABLE BOUNDARY LOCATION IDENTIFCATION FOR RAINFALL-RUNOFF AND SURGE MODEL COUPLING TO EVALUATE COMPOUND FLOOD HAZARDS IN COASTAL REGIONS
Flooding in many coastal regions is exacerbated due to complex interactions of multiple flood drivers such as rainfall-runoff and coastal surge which can occur simultaneously or sequentially during storm events, leading to compound flooding hazards. The Texas Gulf Coasts (USA) are especially vulnerable from compound flooding due to frequent occurrence of tropical storms which bring strong winds to drive storm surge and heavy rainfall to generate inland flooding. Large scale studies {Coastal Texas Restoration and Protection Study (CTX, 2021), Texas General Land Office’s Texas River Basin Study, Base Level Engineering Study} are being conducted by state and federal agencies for flood hazard assessment and for development of mitigation and abatement strategies for reducing this risk and increasing community resilience. Traditionally, large scale storm surge models do not account for runoff contributions to water levels in the interior of their domain. Riverine models for their part use either normal depth or mean high water levels to assign downstream boundary conditions within tidally influenced area, thus ignoring effects of storm surge. In this Planning Assistance to States (PAS) study, located in the Lower Clear Creek and Dickinson Bayou watersheds (Texas, USA), we have evaluated rainfall-runoff and storm surge interactions to determine suitable locations to use as model boundary conditions for exchanging data between rainfall-runoff and surge models under compound flooding conditions.
- 1 September 2023
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 37,p. 5
Open AccessSUITABLE BOUNDARY LOCATION IDENTIFCATION FOR RAINFALL-RUNOFF AND SURGE MODEL COUPLING TO EVALUATE COMPOUND FLOOD HAZARDS IN COASTAL REGIONS
Flooding in many coastal regions is exacerbated due to complex interactions of multiple flood drivers such as rainfall-runoff and coastal surge which can occur simultaneously or sequentially during storm events, leading to compound flooding hazards. The Texas Gulf Coasts (USA) are especially vulnerable from compound flooding due to frequent occurrence of tropical storms which bring strong winds to drive storm surge and heavy rainfall to generate inland flooding. Large scale studies {Coastal Texas Restoration and Protection Study (CTX, 2021), Texas General Land Office’s Texas River Basin Study, Base Level Engineering Study} are being conducted by state and federal agencies for flood hazard assessment and for development of mitigation and abatement strategies for reducing this risk and increasing community resilience. Traditionally, large scale storm surge models do not account for runoff contributions to water levels in the interior of their domain. Riverine models for their part use either normal depth or mean high water levels to assign downstream boundary conditions within tidally influenced area, thus ignoring effects of storm surge. In this Planning Assistance to States (PAS) study, located in the Lower Clear Creek and Dickinson Bayou watersheds (Texas, USA), we have evaluated rainfall-runoff and storm surge interactions to determine suitable locations to use as model boundary conditions for exchanging data between rainfall-runoff and surge models under compound flooding conditions.
- Open Access
- 7 November 2018
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 6 (4) , 131
Improvements for the Eastern North Pacific ADCIRC Tidal Database (ENPAC15)
This research details the development and validation of the updated Eastern North Pacific (ENPAC) constituent tidal database, referred to as ENPAC15. The database was last updated in 2003 and was developed using the two-dimensional, depth integrated form of the ADvanced CIRCulation coastal hydrodynamic model, ADCIRC. Regional databases, such as ENPAC15, are capable of providing higher resolution near the coast, allowing users to more accurately define tidal forcing for smaller sub-regions. This study follows the same methodology as the EC2015 updates for the eastern coast of the United States and six main areas of improvement in the modeling configurations are examined: (1) placement of the open ocean boundary; (2) higher coastal resolution; (3) updated global bathymetry; (4) updated boundary forcing using two global tidal databases; (5) updated bottom friction formulations; and (6) improved model physics by incorporating the advective terms in ADCIRC. The skill of the improved database is compared to that of its predecessor and is calculated using harmonic data from three sources. Overall, the ENPAC15 database significantly (52% globally) reduces errors in the ENPAC03 database and improves the quality of tidal constituents available for sub-regional models in the ENPAC region.
- 7 November 2018
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 6 (4) , 131
Open AccessImprovements for the Eastern North Pacific ADCIRC Tidal Database (ENPAC15)
This research details the development and validation of the updated Eastern North Pacific (ENPAC) constituent tidal database, referred to as ENPAC15. The database was last updated in 2003 and was developed using the two-dimensional, depth integrated form of the ADvanced CIRCulation coastal hydrodynamic model, ADCIRC. Regional databases, such as ENPAC15, are capable of providing higher resolution near the coast, allowing users to more accurately define tidal forcing for smaller sub-regions. This study follows the same methodology as the EC2015 updates for the eastern coast of the United States and six main areas of improvement in the modeling configurations are examined: (1) placement of the open ocean boundary; (2) higher coastal resolution; (3) updated global bathymetry; (4) updated boundary forcing using two global tidal databases; (5) updated bottom friction formulations; and (6) improved model physics by incorporating the advective terms in ADCIRC. The skill of the improved database is compared to that of its predecessor and is calculated using harmonic data from three sources. Overall, the ENPAC15 database significantly (52% globally) reduces errors in the ENPAC03 database and improves the quality of tidal constituents available for sub-regional models in the ENPAC region.
- 1 September 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Waterway, Port, Coastal, and Ocean Engineering
- Vol. 143 (5)
Coastal-Storm Model Development and Water-Level Validation for the North Atlantic Coast Comprehensive Study
The focus of this paper is on the storm surge modeling effort conducted as part of the North Atlantic Coast Comprehensive Study (NACCS). At the time of this study, the numerical modeling component of the NACCS was the largest civil works high-performance computational modeling effort conducted by the U.S. Army Corps of Engineers (USACE), requiring approximately 100 million CPU hours to complete. The NACCS modeling effort involved the application of the latest atmospheric, wave, and storm surge models and extreme value statistical analysis techniques. The methodology for computing winds, waves, and water levels involved the application of a suite of high-fidelity numerical models within the Coastal Storm Modeling System (CSTORM-MS), including an offshore wave model, WAM, and a nearshore wave model, STWAVE, coupled with the circulation and storm surge model ADCIRC. The high-fidelity modeling suite applied to the NACCS study required extensive grid development, implementation of bathymetric and topographic data, surge and wave model coupling and, because of the magnitude of the study, production script development for automation of model input development, execution, postprocessing, and archiving of model results. The ADCIRC model developed for this study included approximately 6.2 million computational elements and 3.1 million computational nodes, with ADCIRC mesh resolution concentrated in the approximately 1,450-km region from Virginia to Maine. In addition, 10 STWAVE model domains covered the nearshore zone from Virginia to Maine. The WAM model applied to the NACCS required three levels of refinement to adequately simulate offshore waves for this study. Prior to starting NACCS production simulations, the numerical models were validated for a set of historical tropical and extratropical storm events. Production model simulations (consisting of both synthetic and historical storms) were performed during an 8-month period, analyzed, and ultimately incorporated into the Coastal Hazards System (CHS). (The synthetic tropical storms were developed to populate the statistical parameter space as part of the project design process.) The suite of storms included 1,050 synthetic tropical storms and 100 historical extratropical events, each simulated for four conditions. Production storms were first simulated as surge only simulations with the application of ADCIRC in stand-alone mode and were then simulated as surge plus wave simulations by applying the CSTORM-MS to include the effect of wave radiation stress gradients on water levels. Next, the 1,150 surge plus wave storm suite was repeated with the inclusion of either a random tide (synthetic tropical storms) or a historical tide (historical extratropical events). Last, the surge plus wave and tide storm suite was simulated with the inclusion of a 1.0-m increase in sea-level adjustment. The storage requirement for the 4,600 NACCS production simulations and other project files was approximately 190 TB. This paper primarily focuses on the ADCIRC model development and validation, whereas other studies focus on other processes, such as the extreme value statistical analysis techniques and the characterization of storm surge response to the inclusion of waves, tide, sea-level change, and variation in storm forcing parameters.
- 1 September 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Waterway, Port, Coastal, and Ocean Engineering
- Vol. 143 (5)
Coastal-Storm Model Development and Water-Level Validation for the North Atlantic Coast Comprehensive Study
The focus of this paper is on the storm surge modeling effort conducted as part of the North Atlantic Coast Comprehensive Study (NACCS). At the time of this study, the numerical modeling component of the NACCS was the largest civil works high-performance computational modeling effort conducted by the U.S. Army Corps of Engineers (USACE), requiring approximately 100 million CPU hours to complete. The NACCS modeling effort involved the application of the latest atmospheric, wave, and storm surge models and extreme value statistical analysis techniques. The methodology for computing winds, waves, and water levels involved the application of a suite of high-fidelity numerical models within the Coastal Storm Modeling System (CSTORM-MS), including an offshore wave model, WAM, and a nearshore wave model, STWAVE, coupled with the circulation and storm surge model ADCIRC. The high-fidelity modeling suite applied to the NACCS study required extensive grid development, implementation of bathymetric and topographic data, surge and wave model coupling and, because of the magnitude of the study, production script development for automation of model input development, execution, postprocessing, and archiving of model results. The ADCIRC model developed for this study included approximately 6.2 million computational elements and 3.1 million computational nodes, with ADCIRC mesh resolution concentrated in the approximately 1,450-km region from Virginia to Maine. In addition, 10 STWAVE model domains covered the nearshore zone from Virginia to Maine. The WAM model applied to the NACCS required three levels of refinement to adequately simulate offshore waves for this study. Prior to starting NACCS production simulations, the numerical models were validated for a set of historical tropical and extratropical storm events. Production model simulations (consisting of both synthetic and historical storms) were performed during an 8-month period, analyzed, and ultimately incorporated into the Coastal Hazards System (CHS). (The synthetic tropical storms were developed to populate the statistical parameter space as part of the project design process.) The suite of storms included 1,050 synthetic tropical storms and 100 historical extratropical events, each simulated for four conditions. Production storms were first simulated as surge only simulations with the application of ADCIRC in stand-alone mode and were then simulated as surge plus wave simulations by applying the CSTORM-MS to include the effect of wave radiation stress gradients on water levels. Next, the 1,150 surge plus wave storm suite was repeated with the inclusion of either a random tide (synthetic tropical storms) or a historical tide (historical extratropical events). Last, the surge plus wave and tide storm suite was simulated with the inclusion of a 1.0-m increase in sea-level adjustment. The storage requirement for the 4,600 NACCS production simulations and other project files was approximately 190 TB. This paper primarily focuses on the ADCIRC model development and validation, whereas other studies focus on other processes, such as the extreme value statistical analysis techniques and the characterization of storm surge response to the inclusion of waves, tide, sea-level change, and variation in storm forcing parameters.
- 1 April 2014
- Published by Springer Nature in Engineering with Computers
- Vol. 31 (2) , 375-386
Locally constrained nodal connectivity refinement procedures for unstructured triangular finite element meshes
- 1 April 2014
- Published by Springer Nature in Engineering with Computers
- Vol. 31 (2) , 375-386
Locally constrained nodal connectivity refinement procedures for unstructured triangular finite element meshes
- 21 June 2011
- Published by American Society of Civil Engineers (ASCE)
- p. 41-52
Screening Method for Determining Coastal Storm Inundation Limits
Planning and development in the coastal zone requires knowledge about the risk of flooding from coastal storms and hurricanes. Critical infrastructure, such as hospitals, power plants, and emergency response centers, when possible, should be sited in areas beyond the surge limits of a "worst-case" hurricane defined by a maximum possible intensity (MPI). Knowledge about the surge limits in a coastal area also provides a critical elevation contour beyond which it is known that coastal storm flood risk need not be considered. The purpose of this paper is to document a screening methodology to determine if a site is at risk for flooding from coastal storms. The methodology incorporates an open-coast surge calculation, wind wave effects, tide, and uncertainty to estimate an appropriately conservative elevation threshold that determines if a given site requires a more detailed estimation of the coastal flood risk. The method is demonstrated on the USA Texas and Mississippi coasts.
- 21 June 2011
- Published by American Society of Civil Engineers (ASCE)
- p. 41-52
Screening Method for Determining Coastal Storm Inundation Limits
Planning and development in the coastal zone requires knowledge about the risk of flooding from coastal storms and hurricanes. Critical infrastructure, such as hospitals, power plants, and emergency response centers, when possible, should be sited in areas beyond the surge limits of a "worst-case" hurricane defined by a maximum possible intensity (MPI). Knowledge about the surge limits in a coastal area also provides a critical elevation contour beyond which it is known that coastal storm flood risk need not be considered. The purpose of this paper is to document a screening methodology to determine if a site is at risk for flooding from coastal storms. The methodology incorporates an open-coast surge calculation, wind wave effects, tide, and uncertainty to estimate an appropriately conservative elevation threshold that determines if a given site requires a more detailed estimation of the coastal flood risk. The method is demonstrated on the USA Texas and Mississippi coasts.