Philippe Reiffsteck
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Philippe Reiffsteck has a total of 133 co-authors. Here are the top co-authors by number of shared publications:
- Christophe Chevalier
Université Gustave Eiffel
8 shared publications - Alain Le Kouby
Université Gustave Eiffel
7 shared publications Antoine Guimond-Barrett
SNCF Réseau , Paris, France
4 shared publicationsAnne Pantet
LOMC, Université du Havre , Paris, France
3 shared publications- Franziska Schmidt
Université Gustave Eiffel
3 shared publications - Tianyu Wang
Guangzhou Huali College
3 shared publications
Latest Publications
- Open Access
- 30 October 2026
- Published by TU Delft OPEN Publishing
Ground Models in Eurocode 7: National perspectives
The second-generation Eurocode 7 (EN 1997-1 and -2:2024) introduces a structured and mandatory Ground Model as the foundation for geotechnical design, representing a significant shift for engineering geology and geotechnical engineering practice across Europe. The new standard formalises the representation of geological, hydrogeological, and geotechnical conditions and requires transparent documentation of uncertainties, spatial variability, and alternative interpretations. This manuscript provides a full overview of the Ground Model as defined in the second-generation Eurocode 7, including its structure, purpose, and implications. This paper provides an overview of the Ground Model as defined in the second-generation Eurocode 7, the history of Ground Models in the different European countries of the authors, the national approaches related to the second-generation Eurocode and the challenges we are facing making Ground Models work across Europe. The paper will help to prepare practitioners for the changes introduced by EC7 regarding Ground Models.
- 30 October 2026
- Published by TU Delft OPEN Publishing
Open AccessGround Models in Eurocode 7: National perspectives
The second-generation Eurocode 7 (EN 1997-1 and -2:2024) introduces a structured and mandatory Ground Model as the foundation for geotechnical design, representing a significant shift for engineering geology and geotechnical engineering practice across Europe. The new standard formalises the representation of geological, hydrogeological, and geotechnical conditions and requires transparent documentation of uncertainties, spatial variability, and alternative interpretations. This manuscript provides a full overview of the Ground Model as defined in the second-generation Eurocode 7, including its structure, purpose, and implications. This paper provides an overview of the Ground Model as defined in the second-generation Eurocode 7, the history of Ground Models in the different European countries of the authors, the national approaches related to the second-generation Eurocode and the challenges we are facing making Ground Models work across Europe. The paper will help to prepare practitioners for the changes introduced by EC7 regarding Ground Models.
- Open Access
- 1 October 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Chemical mechanisms governing the evolution of functional properties of nonwoven hemp geotextiles aged under two soil environmental conditions
- 1 October 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Open AccessChemical mechanisms governing the evolution of functional properties of nonwoven hemp geotextiles aged under two soil environmental conditions
- Open Access
- 20 July 2026
- Published by Elsevier in SSRN Electronic Journal
Chemical mechanisms governing the evolution of functional properties of nonwoven hemp geotextiles aged under two soil environmental conditions
This study investigates the chemical mechanisms governing the ageing of nonwoven hemp geotextiles in alkaline recycled concrete aggregate soils (pH ≈ 10.5) under water saturated and unsaturated conditions over six months, using XRD, FTIR and biochemical analyses. Under water saturated conditions, crystallinity of hemp remains stable due to competing effects between amorphous component removal and alkaline-induced disruption of cellulose structure. In contrast, unsaturated conditions lead to increased crystallinity driven by preferential degradation of amorphous constituents, while microbial biomass growth may technically mask hemp geotextile compositional changes. Overall, degradation pathways differ depending on hydric conditions: chemically driven under saturation and biologically driven under unsaturated conditions, with direct implications for geotextile durability in road environments. These results provide a better understanding of the durability and performance of hemp-based geotextiles in road applications depending on the hydric state of the soil.
- 20 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessChemical mechanisms governing the evolution of functional properties of nonwoven hemp geotextiles aged under two soil environmental conditions
This study investigates the chemical mechanisms governing the ageing of nonwoven hemp geotextiles in alkaline recycled concrete aggregate soils (pH ≈ 10.5) under water saturated and unsaturated conditions over six months, using XRD, FTIR and biochemical analyses. Under water saturated conditions, crystallinity of hemp remains stable due to competing effects between amorphous component removal and alkaline-induced disruption of cellulose structure. In contrast, unsaturated conditions lead to increased crystallinity driven by preferential degradation of amorphous constituents, while microbial biomass growth may technically mask hemp geotextile compositional changes. Overall, degradation pathways differ depending on hydric conditions: chemically driven under saturation and biologically driven under unsaturated conditions, with direct implications for geotextile durability in road environments. These results provide a better understanding of the durability and performance of hemp-based geotextiles in road applications depending on the hydric state of the soil.
- Open Access
- 30 September 2025
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 48 (4)
New electric powered drill rig to meet sustainable geotechnics
Drilling boreholes for geotechnical purposes such as sampling, in-situ tests and permeability testing are usually performed with the aid of drilling machines. These heavy duty machines generally use internal combustion motors to provide energy to hydraulic pumps feeding the different actuators needed to push, rotate and hammer the drill bit into the ground. This results in a relatively noisy and polluted environment for the workers and the surrounding area. With the popularization of electric vehicles, it’s time drilling machines also make the switch to electric power. This paper presents one such prototype machine developed by Fondasol company, with the initially proposed technical specifications and the realized equipment. Autonomy for up to one week has been observed on real sites, depending on the project’s drilling objective. The use of electric motors allows for a new type of measuring while drilling, as the measurement of electric current and voltage is much more reliable than hydraulic pressure and flow rates. With this electric-based design, additional external sensors are no longer necessary. A first insight into this new type of measurements and its physical meaning is also given and discussed within this paper.
- 30 September 2025
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 48 (4)
Open AccessNew electric powered drill rig to meet sustainable geotechnics
Drilling boreholes for geotechnical purposes such as sampling, in-situ tests and permeability testing are usually performed with the aid of drilling machines. These heavy duty machines generally use internal combustion motors to provide energy to hydraulic pumps feeding the different actuators needed to push, rotate and hammer the drill bit into the ground. This results in a relatively noisy and polluted environment for the workers and the surrounding area. With the popularization of electric vehicles, it’s time drilling machines also make the switch to electric power. This paper presents one such prototype machine developed by Fondasol company, with the initially proposed technical specifications and the realized equipment. Autonomy for up to one week has been observed on real sites, depending on the project’s drilling objective. The use of electric motors allows for a new type of measuring while drilling, as the measurement of electric current and voltage is much more reliable than hydraulic pressure and flow rates. With this electric-based design, additional external sensors are no longer necessary. A first insight into this new type of measurements and its physical meaning is also given and discussed within this paper.
- Open Access
- 18 February 2025
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 48 (1)
Evaluation of heat pump efficiency within an energy pile group: effect of heat cluster, underground seepage and seasonal cycles
Energy geostructures are a cost-effective solution for low enthalpy geothermal installations. Heat exchanger pipes are attached to the reinforcing cages of geotechnical structures to combine structural and geothermal roles. However, the installation of a group of multiple energy structures, such as a pile group, can lead to a heat cluster effect, which tends to decrease the efficiency of the heat pump (COP factor). This phenomenon is amplified by the number of grouped energy geostructures. However, energy geostructures are often installed in areas with groundwater flow. This induces a thermal washing effect, which decreases the risk of multi-year thermal shifts and preserves heat pump efficiency. In this paper, we evaluate the heat cluster effect in a group of piles, its influence on heat pump COP, the benefit of thermal washing due to underground water flow, and the effect of various seasonal scenarios. For this purpose, we present and use a specific numerical process that allows for modeling energy geostructure installations and interactions between groundwater flow models and thermal models. The heat pump COP is then estimated according to variable heat load, which depends on soil temperature.
- 18 February 2025
- Published by ABMS - Brazilian Association for Soil Mechanics and Geotechnical Engineering in Soils and Rocks
- Vol. 48 (1)
Open AccessEvaluation of heat pump efficiency within an energy pile group: effect of heat cluster, underground seepage and seasonal cycles
Energy geostructures are a cost-effective solution for low enthalpy geothermal installations. Heat exchanger pipes are attached to the reinforcing cages of geotechnical structures to combine structural and geothermal roles. However, the installation of a group of multiple energy structures, such as a pile group, can lead to a heat cluster effect, which tends to decrease the efficiency of the heat pump (COP factor). This phenomenon is amplified by the number of grouped energy geostructures. However, energy geostructures are often installed in areas with groundwater flow. This induces a thermal washing effect, which decreases the risk of multi-year thermal shifts and preserves heat pump efficiency. In this paper, we evaluate the heat cluster effect in a group of piles, its influence on heat pump COP, the benefit of thermal washing due to underground water flow, and the effect of various seasonal scenarios. For this purpose, we present and use a specific numerical process that allows for modeling energy geostructure installations and interactions between groundwater flow models and thermal models. The heat pump COP is then estimated according to variable heat load, which depends on soil temperature.
- 1 February 2025
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 30 (2)
Managing Railway Bridges Crossing Waterways through a Machine Learning-Based Maintenance Policy
- 1 February 2025
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 30 (2)
Managing Railway Bridges Crossing Waterways through a Machine Learning-Based Maintenance Policy
- Open Access
- 17 September 2024
- Published by Taylor & Francis
- p. 765-768
Evolution of shallow foundation load test from static to cyclic loading
The conventional bearing capacity of a shallow foundation under vertical centered loading measured under static and cyclic loading differs. This observation is of crucial importance to anticipate behaviour of structure under cyclic loads with or without eccentricity. The most important factor appears to be the ratio of the cyclic load amplitude to the maximum static bearing capacity. This paper presents an experimental study during which a 0.1m square steel footing was statically and cyclically loaded. A parametric study was carried out by performing tests on a physical model based on a sand mass reconstituted at a fixed density index. Complementary tests were performed on an intact silty soil on an experimental test site. The loading frequency was kept below 1Hz, which is lower than the natural frequency of the foundation. Prior to testing, cone penetration test and laboratory tests were performed to determine engineering properties of the soil. An analysis of the results and a comparison with previous tests available in the literature are presented. Predictions of the footing settlement were made by traditional methods, which were then modified to take into account of the effect of cyclic loading.
- 17 September 2024
- Published by Taylor & Francis
- p. 765-768
Open AccessEvolution of shallow foundation load test from static to cyclic loading
The conventional bearing capacity of a shallow foundation under vertical centered loading measured under static and cyclic loading differs. This observation is of crucial importance to anticipate behaviour of structure under cyclic loads with or without eccentricity. The most important factor appears to be the ratio of the cyclic load amplitude to the maximum static bearing capacity. This paper presents an experimental study during which a 0.1m square steel footing was statically and cyclically loaded. A parametric study was carried out by performing tests on a physical model based on a sand mass reconstituted at a fixed density index. Complementary tests were performed on an intact silty soil on an experimental test site. The loading frequency was kept below 1Hz, which is lower than the natural frequency of the foundation. Prior to testing, cone penetration test and laboratory tests were performed to determine engineering properties of the soil. An analysis of the results and a comparison with previous tests available in the literature are presented. Predictions of the footing settlement were made by traditional methods, which were then modified to take into account of the effect of cyclic loading.
- 11 July 2024
- Published by Springer Nature
- p. 2035-2048
Shallow Foundation Design Using Dynamic Cone Penetrometer and Taking into Account Liquefaction Aspect
- 11 July 2024
- Published by Springer Nature
- p. 2035-2048
Shallow Foundation Design Using Dynamic Cone Penetrometer and Taking into Account Liquefaction Aspect
- Open Access
- 5 July 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (13) , 5881
Effect of Plastic Fine Content on the Static Liquefaction Potential of Sandy Soil
This study aims to investigate the effect of plastic fine content on the undrained monotonic behavior of sandy soils (mixtures of host sand and various plastic fine content from 0 to 25%), and in particular, their static liquefaction resistance (undrained shear strength). Illite Arvel is considered as a plastic fine to add to the host sand, the Fontainebleau sand. Binary mixture samples are reconstituted by using the moist tamping technique. A series of undrained triaxial tests were carried out to study the influence of different parameters, such as the fine content, the initial density index, the confining pressure, and the over-consolidation ratio (OCR) on the behavior of sandy soil mixture. Based on the results acquired from these tests, the liquefaction susceptibility of the sandy soil is discussed by using Chinese criteria.
- 5 July 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (13) , 5881
Open AccessEffect of Plastic Fine Content on the Static Liquefaction Potential of Sandy Soil
This study aims to investigate the effect of plastic fine content on the undrained monotonic behavior of sandy soils (mixtures of host sand and various plastic fine content from 0 to 25%), and in particular, their static liquefaction resistance (undrained shear strength). Illite Arvel is considered as a plastic fine to add to the host sand, the Fontainebleau sand. Binary mixture samples are reconstituted by using the moist tamping technique. A series of undrained triaxial tests were carried out to study the influence of different parameters, such as the fine content, the initial density index, the confining pressure, and the over-consolidation ratio (OCR) on the behavior of sandy soil mixture. Based on the results acquired from these tests, the liquefaction susceptibility of the sandy soil is discussed by using Chinese criteria.
- Open Access
- 2 July 2024
- Published by EDP Sciences
- Vol. 544, 03002
Laboratory evaluation of sampling quality of a new A+ sampler for natural fine soils
This paper presents a comparison of sampling disturbance measured by consolidation tests between two high quality samplers and stationary piston samplers. University G. Eiffel and Cerema have used their université Laval sampler and a new sampler on a soft organic clayey soil experimental site. This paper present first the new sampler designed to sample almost undisturbed soil specimens. The objectives of this sampler are to collect natural fine soils such as clay or silt, normally to medium overconsolidated for depths up to 10 m. This sampler is designed to preserve the saturation state of the specimen. An inner diameter of 150mm core barrel allow to keep the sampler relatively compact, even with the size of a ball valve used to close the sampler. Tests on Pont de Cran clayey site are presented and laboratory tests results on specimen sampled using both samplers show the quality of the specimen and the efficiency of the samplers using void ratio criteria.
- 2 July 2024
- Published by EDP Sciences
- Vol. 544, 03002
Open AccessLaboratory evaluation of sampling quality of a new A+ sampler for natural fine soils
This paper presents a comparison of sampling disturbance measured by consolidation tests between two high quality samplers and stationary piston samplers. University G. Eiffel and Cerema have used their université Laval sampler and a new sampler on a soft organic clayey soil experimental site. This paper present first the new sampler designed to sample almost undisturbed soil specimens. The objectives of this sampler are to collect natural fine soils such as clay or silt, normally to medium overconsolidated for depths up to 10 m. This sampler is designed to preserve the saturation state of the specimen. An inner diameter of 150mm core barrel allow to keep the sampler relatively compact, even with the size of a ball valve used to close the sampler. Tests on Pont de Cran clayey site are presented and laboratory tests results on specimen sampled using both samplers show the quality of the specimen and the efficiency of the samplers using void ratio criteria.