Laura Aldave de Las Heras
Laura Aldave de Las Heras has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
Miguel Sandow
Directorate G - Nuclear Safety & Security, Unit G.III. 8 - Waste Management, European Commission, DG Joint Research Centre - JRC
2 shared publicationsSylvain Millet
Directorate G - Nuclear Safety & Security, Unit G.III. 8 - Waste Management, European Commission, DG Joint Research Centre - JRC
2 shared publicationsAina Bruno
AMPHOS-21 , Barcelona, Spain
1 shared publicationAlison Meteyer
ORANO , Châtillon, France
1 shared publication- Anthony Banford
Chadwick House, United Kingdom National Nuclear Laboratory, Risley, Warrington WA3 6AE, UK
1 shared publication Arne Larsson
CYCLIFE , Nyköping, Sweden
1 shared publication
Latest Publications
- 3 October 2023
- Published by ASME International
Prioritisation of Needs and Opportunities for Promoting Circular Economy When Managing Materials and Waste Arising From Nuclear Decommissioning
The Euratom HARPERS (HARmonised PracticEs, Regulations and Standards in waste management and decommissioning) project aims to establish and clarify the benefits and added value of a more aligned practices, methodologies and approaches for prioritised topics related to decommissioning and initial phases of radioactive waste handling, including shared processing facilities between Member States (MS). The HARPERS project has a two-phase approach: the first phase involves engaging with Stakeholders to assess needs and pros/cons for harmonisation and to identify priority areas for deeper analysis. The second phase will pursue deeper engagement with Stakeholders to further assess the highest ranked priority areas in the three technical Work Packages. In Phase 2 the industry and business impacts resulting from the project findings will be also evaluated. Work Package 4 (WP4) of HARPERS project is focused on addressing the most important conditions and opportunities for promoting Circular Economy approaches when managing materials and waste arising from nuclear decommissioning across Europe. For the prioritisation of needs and opportunities for Circular Economy considerations, a detailed list of topics (challenges/needs - related to alignment of practices and approaches) has been developed. Topics were clustered into 7 main categories and discussed with interested external stakeholders during dedicated on-line workshops conducted in January and February 2023. Criteria for the prioritisation of topics, based on drivers relating to societal impacts, actor-specific impacts, scientific impacts and financial impacts, have been developed and discussed during the workshops too. This work presents the preliminary outcomes of the two online workshops.
- 3 October 2023
- Published by ASME International
Prioritisation of Needs and Opportunities for Promoting Circular Economy When Managing Materials and Waste Arising From Nuclear Decommissioning
The Euratom HARPERS (HARmonised PracticEs, Regulations and Standards in waste management and decommissioning) project aims to establish and clarify the benefits and added value of a more aligned practices, methodologies and approaches for prioritised topics related to decommissioning and initial phases of radioactive waste handling, including shared processing facilities between Member States (MS). The HARPERS project has a two-phase approach: the first phase involves engaging with Stakeholders to assess needs and pros/cons for harmonisation and to identify priority areas for deeper analysis. The second phase will pursue deeper engagement with Stakeholders to further assess the highest ranked priority areas in the three technical Work Packages. In Phase 2 the industry and business impacts resulting from the project findings will be also evaluated. Work Package 4 (WP4) of HARPERS project is focused on addressing the most important conditions and opportunities for promoting Circular Economy approaches when managing materials and waste arising from nuclear decommissioning across Europe. For the prioritisation of needs and opportunities for Circular Economy considerations, a detailed list of topics (challenges/needs - related to alignment of practices and approaches) has been developed. Topics were clustered into 7 main categories and discussed with interested external stakeholders during dedicated on-line workshops conducted in January and February 2023. Criteria for the prioritisation of topics, based on drivers relating to societal impacts, actor-specific impacts, scientific impacts and financial impacts, have been developed and discussed during the workshops too. This work presents the preliminary outcomes of the two online workshops.
- Open Access
- 30 March 2020
- Published by EDP Sciences in EPJ Nuclear Sciences & Technologies
- Vol. 6, 17
Metrology applications to D&D issues: issues at stake for INSIDER European project
Nuclear metrology is an essential aspect to consider for further improvements of the initial characterization of sites under decommissioning. The H2020 Euratom project INSIDER in June 2017 aims at improving the management of contaminated materials arising from decommissioning and dismantling (D&D) operations by proposing an integrated methodology for radiological characterization. This methodology is based on advanced statistical processing and modelling, coupled with adapted or innovative measurement methods. A metrological approach supports the qualification of this integrated methodology with a concrete application to real projects representative of the use cases identified in the project. Assessment of the outcomes will be used for providing recommendations and guidance resulting in pre-standardization texts.
- 30 March 2020
- Published by EDP Sciences in EPJ Nuclear Sciences & Technologies
- Vol. 6, 17
Open AccessMetrology applications to D&D issues: issues at stake for INSIDER European project
Nuclear metrology is an essential aspect to consider for further improvements of the initial characterization of sites under decommissioning. The H2020 Euratom project INSIDER in June 2017 aims at improving the management of contaminated materials arising from decommissioning and dismantling (D&D) operations by proposing an integrated methodology for radiological characterization. This methodology is based on advanced statistical processing and modelling, coupled with adapted or innovative measurement methods. A metrological approach supports the qualification of this integrated methodology with a concrete application to real projects representative of the use cases identified in the project. Assessment of the outcomes will be used for providing recommendations and guidance resulting in pre-standardization texts.
- Open Access
An Automated SeaFAST ICP-DRC-MS Method for the Determination of 90Sr in Spent Nuclear Fuel Leachates
To reduce uncertainties in determining the source term and evolving condition of spent nuclear fuel is fundamental to the safety assessment. ß-emitting nuclides pose a challenging task for reliable, quantitative determination because both radiometric and mass spectrometric methodologies require prior chemical purification for the removal of interfering activity and isobars, respectively. A method for the determination of 90Sr at trace levels in nuclear spent fuel leachate samples without sophisticated and time-consuming procedures has been established. The analytical approach uses a commercially available automated pre-concentration device (SeaFAST) coupled to an ICP-DRC-MS. The method shows good performances with regard to reproducibility, precision, and LOD reducing the total time of analysis for each sample to 12.5 min. The comparison between the developed method and the classical radiochemical method shows a good agreement when taking into account the associated uncertainties.
Open AccessAn Automated SeaFAST ICP-DRC-MS Method for the Determination of 90Sr in Spent Nuclear Fuel Leachates
To reduce uncertainties in determining the source term and evolving condition of spent nuclear fuel is fundamental to the safety assessment. ß-emitting nuclides pose a challenging task for reliable, quantitative determination because both radiometric and mass spectrometric methodologies require prior chemical purification for the removal of interfering activity and isobars, respectively. A method for the determination of 90Sr at trace levels in nuclear spent fuel leachate samples without sophisticated and time-consuming procedures has been established. The analytical approach uses a commercially available automated pre-concentration device (SeaFAST) coupled to an ICP-DRC-MS. The method shows good performances with regard to reproducibility, precision, and LOD reducing the total time of analysis for each sample to 12.5 min. The comparison between the developed method and the classical radiochemical method shows a good agreement when taking into account the associated uncertainties.
- Open Access
- 6 June 2018
- Published by MyJove Corporation in Journal of Visualized Experiments
- No. 136,p. e57722
Automated 90Sr Separation and Preconcentration in a Lab-on-Valve System at Ppq Level
A quick, automated and portable system for the separation and determination of radiostrontium in aqueous samples, using Sr-resin and multi sequential flow injection analysis, has been developed. The concentrations of radioactive strontium were determined by flow scintillation counting, allowing for on-line and also on-site determination. The proposed system can determine radioactive strontium at industrial relevant levels without further modification using overall analysis time of less than 10 min per aqueous sample. The limit of the detection is 320 fg·g-1 (1.7 Bq/g).
- 6 June 2018
- Published by MyJove Corporation in Journal of Visualized Experiments
- No. 136,p. e57722
Open AccessAutomated 90Sr Separation and Preconcentration in a Lab-on-Valve System at Ppq Level
A quick, automated and portable system for the separation and determination of radiostrontium in aqueous samples, using Sr-resin and multi sequential flow injection analysis, has been developed. The concentrations of radioactive strontium were determined by flow scintillation counting, allowing for on-line and also on-site determination. The proposed system can determine radioactive strontium at industrial relevant levels without further modification using overall analysis time of less than 10 min per aqueous sample. The limit of the detection is 320 fg·g-1 (1.7 Bq/g).
- Open Access
- 22 May 2017
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 313 (1) , 217-227
A LabVIEW®-based software for the control of the AUTORAD platform: a fully automated multisequential flow injection analysis Lab-on-Valve (MSFIA-LOV) system for radiochemical analysis
A LabVIEW®-based software for the control of the fully automated multi-sequential flow injection analysis Lab-on-Valve (MSFIA-LOV) platform AutoRAD performing radiochemical analysis is described. The analytical platform interfaces an Arduino®-based device triggering multiple detectors providing a flexible and fit for purpose choice of detection systems. The different analytical devices are interfaced to the PC running LabVIEW®VI software using USB and RS232 interfaces, both for sending commands and receiving confirmation or error responses. The AUTORAD platform has been successfully applied for the chemical separation and determination of Sr, an important fission product pertinent to nuclear waste.
- 22 May 2017
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 313 (1) , 217-227
Open AccessA LabVIEW®-based software for the control of the AUTORAD platform: a fully automated multisequential flow injection analysis Lab-on-Valve (MSFIA-LOV) system for radiochemical analysis
A LabVIEW®-based software for the control of the fully automated multi-sequential flow injection analysis Lab-on-Valve (MSFIA-LOV) platform AutoRAD performing radiochemical analysis is described. The analytical platform interfaces an Arduino®-based device triggering multiple detectors providing a flexible and fit for purpose choice of detection systems. The different analytical devices are interfaced to the PC running LabVIEW®VI software using USB and RS232 interfaces, both for sending commands and receiving confirmation or error responses. The AUTORAD platform has been successfully applied for the chemical separation and determination of Sr, an important fission product pertinent to nuclear waste.