Floarea-Maria Brebu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Floarea-Maria Brebu has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Alina Corina Bălă
Politehnica University Timisoara, Faculty of Civil Engineering , Department of Overland Communication Ways, Foundations and Cadastral Survey , 2 Traian Lalescu Street , Romania
5 shared publications - Adrian Alionescu
Civil Engineering Faculty, Department of Surveying and Cadastre, Politehnica UniversityTimişoara, România, No 2 Victoriei Square, tel.0256403098
1 shared publication - Alexandra Ciopec
Politehnica University Timisoara, Faculty of Civil Engineering , Department of Overland Communication Ways, Foundations and Cadastral Survey , 2 Traian Lalescu Street , Romania
1 shared publication Alina Corina
1 shared publication- Anca-Maria Moscovici
Civil Engineering Faculty, Department of Surveying and Cadastre, Politehnica UniversityTimişoara, România, No 2 Victoriei Square, tel.0256403098
1 shared publication - Bogdan Dragulescu
DataLab, Communications Department, Politehnica University Timisoara, 2 Vasile Parvan, 300223 Timisoara, Romania
1 shared publication
Latest Publications
- Open Access
- 1 December 2025
- Published by Walter de Gruyter GmbH in Journal of Applied Engineering Sciences
- Vol. 15 (2) , 207-212
A Python-Based Framework for the Transformation and Visualization of GNSS Data in Engineering and Geospatial Applications
Global Navigation Satellite System (GNSS) observables are standardized in RINEX files, but most existing tools for position extraction are fragmented and require manual intervention. This paper introduces a Python-based framework that automates the processing of RINEX 2.11 observation files by extracting approximate receiver positions, transforming them into the WGS84 system, filtering invalid data, and exporting results in structured formats. The workflow produces multi-format outputs (CSV, KML, interactive maps), enabling direct integration with engineering and geospatial applications. Implemented in Google Colab with open-source libraries, the framework was validated on real datasets, demonstrating reproducibility, modularity, and scalability. The proposed approach supports diverse applications, including surveying, cadastral mapping, geodetic monitoring, and spatial data science.
- 1 December 2025
- Published by Walter de Gruyter GmbH in Journal of Applied Engineering Sciences
- Vol. 15 (2) , 207-212
Open AccessA Python-Based Framework for the Transformation and Visualization of GNSS Data in Engineering and Geospatial Applications
Global Navigation Satellite System (GNSS) observables are standardized in RINEX files, but most existing tools for position extraction are fragmented and require manual intervention. This paper introduces a Python-based framework that automates the processing of RINEX 2.11 observation files by extracting approximate receiver positions, transforming them into the WGS84 system, filtering invalid data, and exporting results in structured formats. The workflow produces multi-format outputs (CSV, KML, interactive maps), enabling direct integration with engineering and geospatial applications. Implemented in Google Colab with open-source libraries, the framework was validated on real datasets, demonstrating reproducibility, modularity, and scalability. The proposed approach supports diverse applications, including surveying, cadastral mapping, geodetic monitoring, and spatial data science.
- Open Access
- 1 May 2025
- Published by Walter de Gruyter GmbH in Journal of Applied Engineering Sciences
- Vol. 15 (1) , 61-68
Summary of Review Literature on Soil Data Using Satellite Image and Techniques of Artificial Intelligence
The current use of remote sensing allows the analysis of soil moisture levels, surface roughness, and texture. These methods help improve our comprehension of soil processes and facilitate informed decision-making, land management, environmental research, soil classification, and more. Currently, artificial intelligence (AI) techniques, such as machine learning (ML) and deep learning (DL), have the potential to be quite impressive in making accurate and efficient predictions for soil texture classification. The use of AI-based methods and techniques for combining data to process satellite imagery and Earth observation data has recently introduced new opportunities for tracking environmental changes and assessment. In this study, we examine a range of recent applications of AI-based methods and techniques for soil data analysis, including regional classification, continuous mapping with automated algorithms, and the optimization (design/re-design) of monitoring networks. Traditional soil classification and analysis methods have many challenges such as time consuming, very high cost, intrusiveness, among others. By accurately measuring the geotechnical properties and characteristics of soil using these methods combined with suitable ML algorithms will lead to different methods and techniques for soil classification. The integration of AI-based approaches in geotechnical engineering will lead to a new direction in risk assessment. The wide range of applications, from forecasting soil failures and landslides to evaluating structural stability, highlights the significant potential of this synergy.
- 1 May 2025
- Published by Walter de Gruyter GmbH in Journal of Applied Engineering Sciences
- Vol. 15 (1) , 61-68
Open AccessSummary of Review Literature on Soil Data Using Satellite Image and Techniques of Artificial Intelligence
The current use of remote sensing allows the analysis of soil moisture levels, surface roughness, and texture. These methods help improve our comprehension of soil processes and facilitate informed decision-making, land management, environmental research, soil classification, and more. Currently, artificial intelligence (AI) techniques, such as machine learning (ML) and deep learning (DL), have the potential to be quite impressive in making accurate and efficient predictions for soil texture classification. The use of AI-based methods and techniques for combining data to process satellite imagery and Earth observation data has recently introduced new opportunities for tracking environmental changes and assessment. In this study, we examine a range of recent applications of AI-based methods and techniques for soil data analysis, including regional classification, continuous mapping with automated algorithms, and the optimization (design/re-design) of monitoring networks. Traditional soil classification and analysis methods have many challenges such as time consuming, very high cost, intrusiveness, among others. By accurately measuring the geotechnical properties and characteristics of soil using these methods combined with suitable ML algorithms will lead to different methods and techniques for soil classification. The integration of AI-based approaches in geotechnical engineering will lead to a new direction in risk assessment. The wide range of applications, from forecasting soil failures and landslides to evaluating structural stability, highlights the significant potential of this synergy.
- Open Access
- 1 May 2024
- Published by Walter de Gruyter GmbH in Journal of Applied Engineering Sciences
- Vol. 14 (1) , 167-177
Analyzing Rinex Data Files Using the Python Programming Language
The techniques and tools developed for geodetic determinations have made it possible, over the past half century, to carry out measurements using global navigation satellite systems. As the accuracy and precision of positioning solutions, such as Fast Static and RTK, improve through technological advances, more applications will become available that can provide users with positioning information over time, autonomously verify the integrity of transmitted data, and ensure sufficient accuracy for their intended purposes. In our study for the interpretation, analysis, and visualization of raw and/or processed RINEX GNSS data recorded over time at a geodetic point using the information available from the Fast Static technique, we used the GeoRinex library from the Python programming language. This library converts data to xarray.data set, for easy use in processing parameter sets, from Rinex files: of ROMPOS reference stations and of the new B10 point resulting from measurements using the Fast Static technique: pseudorange (C1, C2, P1, P2....), carrier phase (L1, L2,…), doppler (D1, D2....) and signal strength (S1, S2....). All this information will help us to analyse and interpret the degradation of the parameters associated with Rinex version 2.11 epoch positioning files 12.02.2023, time interval 12:00-14:00 (fast static) and to understand their accuracy and behavior in different environments. Based on this study, our aim was to evaluate the error in determining the positioning accuracy of the B10 point located in a crowded and heavily trafficked area, which allows sufficient coverage of the GNSS satellites.
- 1 May 2024
- Published by Walter de Gruyter GmbH in Journal of Applied Engineering Sciences
- Vol. 14 (1) , 167-177
Open AccessAnalyzing Rinex Data Files Using the Python Programming Language
The techniques and tools developed for geodetic determinations have made it possible, over the past half century, to carry out measurements using global navigation satellite systems. As the accuracy and precision of positioning solutions, such as Fast Static and RTK, improve through technological advances, more applications will become available that can provide users with positioning information over time, autonomously verify the integrity of transmitted data, and ensure sufficient accuracy for their intended purposes. In our study for the interpretation, analysis, and visualization of raw and/or processed RINEX GNSS data recorded over time at a geodetic point using the information available from the Fast Static technique, we used the GeoRinex library from the Python programming language. This library converts data to xarray.data set, for easy use in processing parameter sets, from Rinex files: of ROMPOS reference stations and of the new B10 point resulting from measurements using the Fast Static technique: pseudorange (C1, C2, P1, P2....), carrier phase (L1, L2,…), doppler (D1, D2....) and signal strength (S1, S2....). All this information will help us to analyse and interpret the degradation of the parameters associated with Rinex version 2.11 epoch positioning files 12.02.2023, time interval 12:00-14:00 (fast static) and to understand their accuracy and behavior in different environments. Based on this study, our aim was to evaluate the error in determining the positioning accuracy of the B10 point located in a crowded and heavily trafficked area, which allows sufficient coverage of the GNSS satellites.
- Open Access
- 1 December 2023
- Published by Walter de Gruyter GmbH in Romanian Journal of Transport Infrastructure
- Vol. 12 (2) , 1-15
Thermal Imaging Used in Building Thermal Evaluation
Constructors have always tried to use optimal building construction materials to have an energetically efficient building. It was determined that by insulating a building, the energy efficiency increases, but what about the efficiency of the used materials? Of course, every material comes with specific characteristics, but those characteristics are determined in a controlled environment. In our research we tried to determine that those material characteristics are the same when the material is used in a real environment. In this regard, we approached thermal imaging and data was processed using the flir-image-extractor-cli module in Python and FLIR Thermal Studio. Both image and data processing were grouped in specific scenarios, indoor and outdoor, for each insulation material. So, when comparing the temperature difference, we found that the contrast was influenced by the shooting angle and the reflections from the window. Furthermore, we can conclude that imaging, in terms of quantitative and qualitative temperature assessment for energy evaluation of a building, clearly demonstrates the value of the procedure as an aid to research investigations.
- 1 December 2023
- Published by Walter de Gruyter GmbH in Romanian Journal of Transport Infrastructure
- Vol. 12 (2) , 1-15
Open AccessThermal Imaging Used in Building Thermal Evaluation
Constructors have always tried to use optimal building construction materials to have an energetically efficient building. It was determined that by insulating a building, the energy efficiency increases, but what about the efficiency of the used materials? Of course, every material comes with specific characteristics, but those characteristics are determined in a controlled environment. In our research we tried to determine that those material characteristics are the same when the material is used in a real environment. In this regard, we approached thermal imaging and data was processed using the flir-image-extractor-cli module in Python and FLIR Thermal Studio. Both image and data processing were grouped in specific scenarios, indoor and outdoor, for each insulation material. So, when comparing the temperature difference, we found that the contrast was influenced by the shooting angle and the reflections from the window. Furthermore, we can conclude that imaging, in terms of quantitative and qualitative temperature assessment for energy evaluation of a building, clearly demonstrates the value of the procedure as an aid to research investigations.
- 1 January 2017
- Published by AIP Publishing
Creating 3D models of historical buildings using geospatial data
Recently, a lot of interest has been shown to understand a real world object by acquiring its 3D images of using laser scanning technology and panoramic images. A realistic impression of geometric 3D data can be generated by draping real colour textures simultaneously captured by a colour camera images. In this context, a new concept of geospatial data acquisition has rapidly revolutionized the method of determining the spatial position of objects, which is based on panoramic images. This article describes an approach that comprises inusing terrestrial laser scanning and panoramic images captured with Trimble V10 Imaging Rover technology to enlarge the details and realism of the geospatial data set, in order to obtain 3D urban plans and virtual reality applications.
- 1 January 2017
- Published by AIP Publishing
Creating 3D models of historical buildings using geospatial data
Recently, a lot of interest has been shown to understand a real world object by acquiring its 3D images of using laser scanning technology and panoramic images. A realistic impression of geometric 3D data can be generated by draping real colour textures simultaneously captured by a colour camera images. In this context, a new concept of geospatial data acquisition has rapidly revolutionized the method of determining the spatial position of objects, which is based on panoramic images. This article describes an approach that comprises inusing terrestrial laser scanning and panoramic images captured with Trimble V10 Imaging Rover technology to enlarge the details and realism of the geospatial data set, in order to obtain 3D urban plans and virtual reality applications.