Gabriela Gic-Grusza
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gabriela Gic-Grusza has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandra Dudkowska
Institute of Hydro-Engineering (IBW PAN), Polish Academy of Sciences, 80-328 Gdansk, Poland
7 shared publications Jan Jędrasik
Institute of Oceanography, University of Gdańsk, Gdynia, Poland
3 shared publications- Piotr Szeląg
Faculty of Electrical Engineering, Częstochowa University of Technology, 69 J.H. Dąbrowskiego Street, 42-201 Częstochowa, Poland
3 shared publications Aleksandra Boruń
2 shared publicationsAleksandra Dudkowska
2 shared publicationsNatalia Chlebus
2 shared publications
Latest Publications
- Open Access
- 9 September 2026
- Published by Elsevier in SSRN Electronic Journal
Sediment-transport pathway reorganization and shoreline response to anthropogenic modification of a multi-barred coast
Multi-barred sandy coasts are characterized by strong cross-shore variability in wave transformation, longshore currents, and sediment transport. Sandbars therefore act as morphological controls on the spatial organization of sediment transport, raising the question of how anthropogenic modification of bar morphology affects sediment pathways and the resulting coastal response. This study investigates these processes on a wave-dominated, microtidal coast of the southern Baltic Sea, where offshore dredging and a pile-supported marine structure represent two distinct perturbations to the natural sediment-transport system.Long-term wave-hindcast information was represented by a climatological average statistical year used to force wave-transformation, longshore-current, and sediment-transport calculations along a representative multi-barred profile. Longshore sediment transport was estimated using the Bijker, van Rijn, and Bailard formulations for the reference bathymetry and for a modified profile in which an offshore bar was removed by dredging. The shoreline response to partial obstruction of longshore sediment transport was examined separately using scenario-based one-line modelling.Under the reference bathymetry, annual net transport was consistently eastward and ranged from 70 × 10³ to 94 × 10³ m³ yr⁻¹. The spatial transport field exhibited three distinct cross-shore pathways associated with the multi-bar morphology and corresponding zones of wave breaking and longshore-current intensification. Removal of the offshore bar strongly suppressed the associated outer pathway, but the resulting change in profile-integrated net transport was strongly formulation dependent: +10.0% for Bijker, +31.1% for van Rijn, and −1.1% for Bailard. Prescribed 20% and 30% transport-obstruction scenarios produced progressive updrift accretion and downdrift erosion, with shoreline adjustment extending approximately 0.8–1.0 km on either side of the structure after 10 years.The results demonstrate that anthropogenic modification of a multi-barred coastal profile can strongly reorganize local sediment-transport pathways without producing a unique proportional response in the integrated annual sediment budget. Resolving gross directional transport and its cross-shore distribution therefore provides process-level information that is lost when coastal response is described solely by annual net transport. Because this decoupling follows from the generic interaction between bar-controlled wave breaking and profile-integrated transport accounting, the mechanism is expected to extend beyond the Lubiatowo case to other wave-dominated multi-barred coasts subject to localized anthropogenic disturbance.
- 9 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSediment-transport pathway reorganization and shoreline response to anthropogenic modification of a multi-barred coast
Multi-barred sandy coasts are characterized by strong cross-shore variability in wave transformation, longshore currents, and sediment transport. Sandbars therefore act as morphological controls on the spatial organization of sediment transport, raising the question of how anthropogenic modification of bar morphology affects sediment pathways and the resulting coastal response. This study investigates these processes on a wave-dominated, microtidal coast of the southern Baltic Sea, where offshore dredging and a pile-supported marine structure represent two distinct perturbations to the natural sediment-transport system.Long-term wave-hindcast information was represented by a climatological average statistical year used to force wave-transformation, longshore-current, and sediment-transport calculations along a representative multi-barred profile. Longshore sediment transport was estimated using the Bijker, van Rijn, and Bailard formulations for the reference bathymetry and for a modified profile in which an offshore bar was removed by dredging. The shoreline response to partial obstruction of longshore sediment transport was examined separately using scenario-based one-line modelling.Under the reference bathymetry, annual net transport was consistently eastward and ranged from 70 × 10³ to 94 × 10³ m³ yr⁻¹. The spatial transport field exhibited three distinct cross-shore pathways associated with the multi-bar morphology and corresponding zones of wave breaking and longshore-current intensification. Removal of the offshore bar strongly suppressed the associated outer pathway, but the resulting change in profile-integrated net transport was strongly formulation dependent: +10.0% for Bijker, +31.1% for van Rijn, and −1.1% for Bailard. Prescribed 20% and 30% transport-obstruction scenarios produced progressive updrift accretion and downdrift erosion, with shoreline adjustment extending approximately 0.8–1.0 km on either side of the structure after 10 years.The results demonstrate that anthropogenic modification of a multi-barred coastal profile can strongly reorganize local sediment-transport pathways without producing a unique proportional response in the integrated annual sediment budget. Resolving gross directional transport and its cross-shore distribution therefore provides process-level information that is lost when coastal response is described solely by annual net transport. Because this decoupling follows from the generic interaction between bar-controlled wave breaking and profile-integrated transport accounting, the mechanism is expected to extend beyond the Lubiatowo case to other wave-dominated multi-barred coasts subject to localized anthropogenic disturbance.
- Open Access
- 16 July 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (14) , 7123
Experimental Evaluation of Path-Following Performance in a Scaled Autonomous Vehicle: Effects of Localization, Path Geometry, Speed, and Pure Pursuit Look-Ahead Distance
Reliable execution of a planned path is essential for autonomous mobile robots and vehicle-like robot platforms. This study experimentally evaluates the path-following performance of a scaled Ackermann-steered autonomous vehicle under different localization and controller configurations. A QCar 2 platform was operated in a hardware-in-the-loop configuration using a Pure Pursuit lateral controller and a proportional-integral longitudinal speed controller. Two localization approaches were compared in the closed control loop: a kinematic localization method and an Extended Kalman Filter. A full factorial () experimental design included the localization method, reference-path geometry (rounded rectangle and figure-eight), commanded speed (0.4 and 0.7 m/s), and Pure Pursuit look-ahead distance (0.3 and 0.6 m), resulting in 16 test configurations. Realized vehicle trajectories were recorded independently using an OptiTrack motion-capture system and compared with the planned paths. Path-following performance was assessed using cross-track error, symmetric Hausdorff distance, and mean bidirectional nearest-neighbor distance. Within the tested runs, differences between the localization variants were small, with mean () values of 0.0929 m and 0.0921 m for the Extended Kalman Filter and kinematic variants, respectively. In contrast, substantially larger differences in trajectory deviations and traveled-path length were observed across path geometries, look-ahead distances, and commanded speeds. The figure-eight path, particularly at the shorter look-ahead distance and higher speed, showed the largest deviations and path-length excess within the tested configurations. The results show that, under the tested laboratory conditions, path-execution quality was more strongly associated with controller tuning and planned-path geometry than with the investigated localization variant. The study provides experimentally validated guidance for selecting path-following parameters for Ackermann-steered autonomous mobile robots.- 16 July 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (14) , 7123
Open AccessExperimental Evaluation of Path-Following Performance in a Scaled Autonomous Vehicle: Effects of Localization, Path Geometry, Speed, and Pure Pursuit Look-Ahead Distance
Reliable execution of a planned path is essential for autonomous mobile robots and vehicle-like robot platforms. This study experimentally evaluates the path-following performance of a scaled Ackermann-steered autonomous vehicle under different localization and controller configurations. A QCar 2 platform was operated in a hardware-in-the-loop configuration using a Pure Pursuit lateral controller and a proportional-integral longitudinal speed controller. Two localization approaches were compared in the closed control loop: a kinematic localization method and an Extended Kalman Filter. A full factorial () experimental design included the localization method, reference-path geometry (rounded rectangle and figure-eight), commanded speed (0.4 and 0.7 m/s), and Pure Pursuit look-ahead distance (0.3 and 0.6 m), resulting in 16 test configurations. Realized vehicle trajectories were recorded independently using an OptiTrack motion-capture system and compared with the planned paths. Path-following performance was assessed using cross-track error, symmetric Hausdorff distance, and mean bidirectional nearest-neighbor distance. Within the tested runs, differences between the localization variants were small, with mean () values of 0.0929 m and 0.0921 m for the Extended Kalman Filter and kinematic variants, respectively. In contrast, substantially larger differences in trajectory deviations and traveled-path length were observed across path geometries, look-ahead distances, and commanded speeds. The figure-eight path, particularly at the shorter look-ahead distance and higher speed, showed the largest deviations and path-length excess within the tested configurations. The results show that, under the tested laboratory conditions, path-execution quality was more strongly associated with controller tuning and planned-path geometry than with the investigated localization variant. The study provides experimentally validated guidance for selecting path-following parameters for Ackermann-steered autonomous mobile robots. - Open Access
- 12 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (4) , 1822
Finite-Difference Analysis of a Quasi-3D Wave-Driven Flow Model: Stability, Grid Structure and Parameter Sensitivity
Wave-driven free-surface flows pose numerical challenges due to tensorial radiation stress forcing, anisotropic diffusion, and strong sensitivity to closure parameters. This paper investigates the numerical behavior of a quasi-3D wave-driven flow model using a coupled depth-integrated (2D) solver with a diagnostic three-dimensional (3D) reconstruction employed for consistency verification to evaluate the validity of dimensional reduction. The scheme is implemented on a staggered Arakawa C-grid with a terrain-following vertical coordinate and explicit pseudo-time-stepping, which enables the direct assessment of stability limits. A reference experiment and systematic sensitivity tests are performed for three idealized bathymetries of increasing complexity. Bottom friction primarily controls the free-surface response, with critical thresholds (e.g., ) identified via the free-surface displacement Z as markers for the onset of numerical stiffness. Horizontal eddy viscosity has a weak influence on depth-integrated transport over most of the tested range, whereas vertical eddy viscosity governs both transport magnitude and stability through the vertical diffusion constraint, acting as the primary bottleneck for computational efficiency. A stability map in the space is provided to delineate stable, marginal, and unstable regimes identifying an optimal vertical resolution of for coastal applications. Grid resolution experiments quantify convergence trends and show that sensitivity increases with bathymetric complexity, revealing that bathymetric aliasing in multi-bar systems can lead to errors of up to 20% if gradients are under-resolved. Finally, a consistent set of diagnostic metrics is proposed for comparing 2D solutions with their vertically resolved counterparts, establishing a validity envelope where 2D models remain reliable versus regimes where explicit vertical shear resolution is mandatory. The results provide a practical roadmap for parameter selection, ensuring numerical robustness in complex, mechanically forced free-surface CFD applications.- 12 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (4) , 1822
Open AccessFinite-Difference Analysis of a Quasi-3D Wave-Driven Flow Model: Stability, Grid Structure and Parameter Sensitivity
Wave-driven free-surface flows pose numerical challenges due to tensorial radiation stress forcing, anisotropic diffusion, and strong sensitivity to closure parameters. This paper investigates the numerical behavior of a quasi-3D wave-driven flow model using a coupled depth-integrated (2D) solver with a diagnostic three-dimensional (3D) reconstruction employed for consistency verification to evaluate the validity of dimensional reduction. The scheme is implemented on a staggered Arakawa C-grid with a terrain-following vertical coordinate and explicit pseudo-time-stepping, which enables the direct assessment of stability limits. A reference experiment and systematic sensitivity tests are performed for three idealized bathymetries of increasing complexity. Bottom friction primarily controls the free-surface response, with critical thresholds (e.g., ) identified via the free-surface displacement Z as markers for the onset of numerical stiffness. Horizontal eddy viscosity has a weak influence on depth-integrated transport over most of the tested range, whereas vertical eddy viscosity governs both transport magnitude and stability through the vertical diffusion constraint, acting as the primary bottleneck for computational efficiency. A stability map in the space is provided to delineate stable, marginal, and unstable regimes identifying an optimal vertical resolution of for coastal applications. Grid resolution experiments quantify convergence trends and show that sensitivity increases with bathymetric complexity, revealing that bathymetric aliasing in multi-bar systems can lead to errors of up to 20% if gradients are under-resolved. Finally, a consistent set of diagnostic metrics is proposed for comparing 2D solutions with their vertically resolved counterparts, establishing a validity envelope where 2D models remain reliable versus regimes where explicit vertical shear resolution is mandatory. The results provide a practical roadmap for parameter selection, ensuring numerical robustness in complex, mechanically forced free-surface CFD applications. - Open Access
Smart Hybrid Maintenance as a Pathway to Energy-Efficient Manufacturing
The growing demand for energy-efficient and sustainable manufacturing requires maintenance strategies that extend beyond reliability optimization toward active energy management. This study proposes a Smart Hybrid Maintenance System (SHMS) that integrates Reliability-Centered Maintenance (RCM) and Condition-Based Maintenance (CBM) principles with energy performance assessment. The framework combines classical reliability indicators (MTBF, MTTR, and Availability) with energy-oriented Key Performance Indicators (EEI, EENS, and OEE) to quantify the relationship between machine degradation, operational availability, and energy efficiency. The methodology was validated using two datasets: NASA N-CMAPSS for simulation-based benchmarking and the Smart RDM industrial environment for real process data. Results demonstrate that predictive maintenance supported by the Hybrid Risk Index () reduces unplanned downtime by up to 12%, corresponding to a 7–9% decrease in specific energy consumption and a measurable improvement in the Energy Efficiency Index. By embedding energy metrics into predictive maintenance decision-making, the SHMS enables dual optimization of reliability and energy performance. The proposed approach not only enhances equipment availability and cost efficiency but also supports industrial decarbonization targets, positioning predictive maintenance as a key enabler of energy-aware and sustainable manufacturing aligned with Industry 5.0 objectives.Open AccessSmart Hybrid Maintenance as a Pathway to Energy-Efficient Manufacturing
The growing demand for energy-efficient and sustainable manufacturing requires maintenance strategies that extend beyond reliability optimization toward active energy management. This study proposes a Smart Hybrid Maintenance System (SHMS) that integrates Reliability-Centered Maintenance (RCM) and Condition-Based Maintenance (CBM) principles with energy performance assessment. The framework combines classical reliability indicators (MTBF, MTTR, and Availability) with energy-oriented Key Performance Indicators (EEI, EENS, and OEE) to quantify the relationship between machine degradation, operational availability, and energy efficiency. The methodology was validated using two datasets: NASA N-CMAPSS for simulation-based benchmarking and the Smart RDM industrial environment for real process data. Results demonstrate that predictive maintenance supported by the Hybrid Risk Index () reduces unplanned downtime by up to 12%, corresponding to a 7–9% decrease in specific energy consumption and a measurable improvement in the Energy Efficiency Index. By embedding energy metrics into predictive maintenance decision-making, the SHMS enables dual optimization of reliability and energy performance. The proposed approach not only enhances equipment availability and cost efficiency but also supports industrial decarbonization targets, positioning predictive maintenance as a key enabler of energy-aware and sustainable manufacturing aligned with Industry 5.0 objectives. - Open Access
Numerical Modeling of the Three-Dimensional Wave-Induced Current Field
This paper showcases the results of three-dimensional numerical modeling of coastal zone hydrodynamics, based on a recently developed three-dimensional analytical model incorporating a three-dimensional formulation of radiation stress. The study examines the influence of cross-shore and alongshore bathymetric variability on hydrodynamic model results, focusing on internal volumetric current transport, bottom friction, free surface elevation, and velocity distributions. Using coastal zone cases with increasing complexity and wave datasets, we analyze differences between 2D and 3D model solutions, as well as theoretical calculations based on analytical solutions. Results indicate that in idealized, homogeneous bathymetric conditions, 2D and 3D models yield similar outputs. However, increased bathymetric complexity introduces significant variations, particularly in velocity fields and transport dynamics. Alongshore variability further modifies these distributions, emphasizing the role of lateral gradients often neglected in simplified models. The study demonstrates that neglecting alongshore bathymetric heterogeneity can lead to underestimation of key hydrodynamic variables, affecting model accuracy in coastal applications. Two-dimensional current transport fields reveal circulation patterns and possible rip current formations, suggesting that the proposed model framework provides improved insights into real-world coastal hydrodynamics. These findings highlight the necessity of incorporating three-dimensional bathymetric variability in predictive models to enhance accuracy in coastal engineering and environmental management applications.
Open AccessNumerical Modeling of the Three-Dimensional Wave-Induced Current Field
This paper showcases the results of three-dimensional numerical modeling of coastal zone hydrodynamics, based on a recently developed three-dimensional analytical model incorporating a three-dimensional formulation of radiation stress. The study examines the influence of cross-shore and alongshore bathymetric variability on hydrodynamic model results, focusing on internal volumetric current transport, bottom friction, free surface elevation, and velocity distributions. Using coastal zone cases with increasing complexity and wave datasets, we analyze differences between 2D and 3D model solutions, as well as theoretical calculations based on analytical solutions. Results indicate that in idealized, homogeneous bathymetric conditions, 2D and 3D models yield similar outputs. However, increased bathymetric complexity introduces significant variations, particularly in velocity fields and transport dynamics. Alongshore variability further modifies these distributions, emphasizing the role of lateral gradients often neglected in simplified models. The study demonstrates that neglecting alongshore bathymetric heterogeneity can lead to underestimation of key hydrodynamic variables, affecting model accuracy in coastal applications. Two-dimensional current transport fields reveal circulation patterns and possible rip current formations, suggesting that the proposed model framework provides improved insights into real-world coastal hydrodynamics. These findings highlight the necessity of incorporating three-dimensional bathymetric variability in predictive models to enhance accuracy in coastal engineering and environmental management applications.
- 24 November 2024
- Published by Elsevier in Ocean Engineering
- Vol. 315
Short-term wave forecasting for offshore wind energy in the Baltic Sea
- 24 November 2024
- Published by Elsevier in Ocean Engineering
- Vol. 315
Short-term wave forecasting for offshore wind energy in the Baltic Sea
- Open Access
- 15 September 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-14
Availability to predators and a size structure of the Antarctic krill Euphausia superba in the 48.1 CCAMLR subarea
The Antarctic krill Euphausia superba is a key species in Antarctic waters, mainly because it is a major component of the diet of dominant predators, including penguins. It is also a marine living resource that is commercially harvested. Since 2000, krill fishing has become more concentrated. On the basis of several years of data, it has been reported that up to 57% of the krill fishery harvests occur in the Bransfield Strait area. The distribution of krill in the Southern Ocean is not well described. Studies that compare the size of krill caught by commercial vessels with that recorded in the diet of predators are even rarer. The main objectives of this study were to assess the spatial diversity in the size and putative age of krill in the CCAMLR subarea 48.1, to investigate the spatial availability of krill and its size and age structure, and to assess whether the diet of Pygoscelis penguins reflects the size structure of krill present in the environment. The results implied that the size and age structure of the krill population were similar throughout the Bransfield Strait during the study period, although those in the eastern and southern parts of the strait and the Brabant Island region were the most similar. The Livingston Island and Drake Passage areas were clearly distinguishable from the above regions, where larger and therefore older krill were recorded. All Pygoscelis penguin species showed size preferences for consumed krill; therefore, their diet is likely not a reliable indicator of the size of krill in the environment. Krill that had not yet reached sexual maturity, and thus not yet started reproducing were commercially caught in the Bransfield Strait during the investigated years.
- 15 September 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-14
Open AccessAvailability to predators and a size structure of the Antarctic krill Euphausia superba in the 48.1 CCAMLR subarea
The Antarctic krill Euphausia superba is a key species in Antarctic waters, mainly because it is a major component of the diet of dominant predators, including penguins. It is also a marine living resource that is commercially harvested. Since 2000, krill fishing has become more concentrated. On the basis of several years of data, it has been reported that up to 57% of the krill fishery harvests occur in the Bransfield Strait area. The distribution of krill in the Southern Ocean is not well described. Studies that compare the size of krill caught by commercial vessels with that recorded in the diet of predators are even rarer. The main objectives of this study were to assess the spatial diversity in the size and putative age of krill in the CCAMLR subarea 48.1, to investigate the spatial availability of krill and its size and age structure, and to assess whether the diet of Pygoscelis penguins reflects the size structure of krill present in the environment. The results implied that the size and age structure of the krill population were similar throughout the Bransfield Strait during the study period, although those in the eastern and southern parts of the strait and the Brabant Island region were the most similar. The Livingston Island and Drake Passage areas were clearly distinguishable from the above regions, where larger and therefore older krill were recorded. All Pygoscelis penguin species showed size preferences for consumed krill; therefore, their diet is likely not a reliable indicator of the size of krill in the environment. Krill that had not yet reached sexual maturity, and thus not yet started reproducing were commercially caught in the Bransfield Strait during the investigated years.
- Open Access
The Three-Dimensional Wave-Induced Current Field: An Analytical Model
Wave-induced currents play a critical role in coastal dynamics, influencing sediment transport and shaping bottom topography. Traditionally, long- and cross-shore currents in coastal zones were analyzed independently, often with two-dimensional models for longshore currents and undertow being used. The introduction of quasi-three-dimensional models marked a significant advancement toward a more holistic understanding. Despite recent proposals for fully three-dimensional models, none have achieved widespread acceptance, primarily due to challenges in accurately capturing depth-dependent radiation stress. This paper presents an innovative analytical model advocating for comprehensive three-dimensional approaches in coastal hydrodynamics. The model, based on novel simplification rules, refines relationships governing turbulent stress tensors and provides valuable insights into wave-induced stresses. It offers analytical solutions for both homogeneous and general coastal zones, laying the foundation for future advancements in numerical modeling techniques.
Open AccessThe Three-Dimensional Wave-Induced Current Field: An Analytical Model
Wave-induced currents play a critical role in coastal dynamics, influencing sediment transport and shaping bottom topography. Traditionally, long- and cross-shore currents in coastal zones were analyzed independently, often with two-dimensional models for longshore currents and undertow being used. The introduction of quasi-three-dimensional models marked a significant advancement toward a more holistic understanding. Despite recent proposals for fully three-dimensional models, none have achieved widespread acceptance, primarily due to challenges in accurately capturing depth-dependent radiation stress. This paper presents an innovative analytical model advocating for comprehensive three-dimensional approaches in coastal hydrodynamics. The model, based on novel simplification rules, refines relationships governing turbulent stress tensors and provides valuable insights into wave-induced stresses. It offers analytical solutions for both homogeneous and general coastal zones, laying the foundation for future advancements in numerical modeling techniques.
- Open Access
- 1 July 2020
- Published by Instytut Oceanologii PAN in Oceanologia
- Vol. 62 (3) , 291-308
Rip currents in the non-tidal surf zone with sandbars: numerical analysis versus field measurements
- 1 July 2020
- Published by Instytut Oceanologii PAN in Oceanologia
- Vol. 62 (3) , 291-308
Open AccessRip currents in the non-tidal surf zone with sandbars: numerical analysis versus field measurements