Indrianto Indrianto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Indrianto Indrianto has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Meilia Nur Indah Susanti
Faculty of Energy Telematics, Institut Teknologi PLN, Jakarta, Indonesia
3 shared publications - Rakhmat Arianto
Sekolah Tinggi Teknik PLN
3 shared publications - Iriansyah Bm. Sangadji
Informatics Engineering, Sekolah Tinggi Teknik PLN Cengkareng West Jakarta. Indonesia
2 shared publications Abdurrasyid Abdurrasyid
Sekolah Tinggi Teknik PLN
1 shared publication- Abdurrasyid Abdurrasyid
Faculty of Energy Telematics, Institut Teknologi PLN, Jakarta, Indonesia
1 shared publication - Abdurrasyid Abdurrasyid
STT PLN
1 shared publication
Latest Publications
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2867 (1) , 030014
Monitoring the location of visually impaired people using the Haversine Method
Many researchers make blind people as the object of research with the aim of helping them to provide solutions to the difficulties faced by these people, especi Many researchers make blind people as the object of research with the aim of helping them to provide solutions to the difficulties faced by these people, especi
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2867 (1) , 030014
Monitoring the location of visually impaired people using the Haversine Method
Many researchers make blind people as the object of research with the aim of helping them to provide solutions to the difficulties faced by these people, especi Many researchers make blind people as the object of research with the aim of helping them to provide solutions to the difficulties faced by these people, especi
- Open Access
- 17 July 2019
- Published by Sekolah Tinggi Teknik-PLN in TERANG
- Vol. 1 (2) , 113-119
Aplikasi Amorik (Animasi Gerak Motorik Tubuh) Sebagai Media Sosialisasi Teknologi Animasi di Lingkungan Pesantren Tahfidz Darussofa Bogor
Pengabdian kepada Masyarakat STT-PLN yang dilaksanakan di lingkungan Pesantren yaitu dengan mengajarkan pembuatan animasi menggunakan software Amorik2D. Pelatihan akan diadakan selama 4 hari dimana 2 hari siswa secara langung diberikan tutorial dan praktek sedangkan 2 hari selanjutnya akan dilaksanakan evaluasi terhadap siswa untuk mengetahui sejauh mana mereka menguasai teknik pembuatan animasi dan video animasi. Animasi ialah suatu seni untuk memanipulasi gambar menjadi seolah-olah hidup dan bergerak, yang terdiri dari animasi 2 dimensi maupun 3 dimensi. Animasi 2D membuat benda seolah hidup dengan mengunakan kertas atau komputer. Pada pengabdian ini metode yang digunakan yaitu pertama membentuk model kemudian model tersebut diberi warna, serta dibuat scenario dari model yang telah dibuat. Seluruh proses pembuatannya dari awal hingga akhir dikerjakan di komputer. Pada pelatihan Animasi ini siswa akan diarahkan untuk tujuan pendidikan yang berguna untuk memperjelaskan tentang koordinasi gerak, di mana dalam satu gerakan badan diperlihatkan gerakan tulang-tulang serta sendi tertentu serta hubungannya dengan gerak otot, yang mana otot yang meregang serta otot mana yang melakukan gerakan menarik. Dalam pembuatan video animasi ini pelatihan menggunakan software Amorik2D yang dibuat dan dikembangkan oleh instruktur tim. Aplikasi grafik dan pembuatan video animasi bertujuan agar Siswa mampu membuat gerakan animasi yang baik dan mampu mengelola pembuatan animasi secara beregu. Pesantren Tahfidz Darussofa Desa Ciburayut Bogor bergerak di bidang pendidikan khususnya melatih santri dan calon hafidz dan sesuai dengan perkembangan jaman, para santri dituntut untuk bisa menguasai teknologi informasi yang nanti dapat mendukung dalam proses belajar.
- 17 July 2019
- Published by Sekolah Tinggi Teknik-PLN in TERANG
- Vol. 1 (2) , 113-119
Open AccessAplikasi Amorik (Animasi Gerak Motorik Tubuh) Sebagai Media Sosialisasi Teknologi Animasi di Lingkungan Pesantren Tahfidz Darussofa Bogor
Pengabdian kepada Masyarakat STT-PLN yang dilaksanakan di lingkungan Pesantren yaitu dengan mengajarkan pembuatan animasi menggunakan software Amorik2D. Pelatihan akan diadakan selama 4 hari dimana 2 hari siswa secara langung diberikan tutorial dan praktek sedangkan 2 hari selanjutnya akan dilaksanakan evaluasi terhadap siswa untuk mengetahui sejauh mana mereka menguasai teknik pembuatan animasi dan video animasi. Animasi ialah suatu seni untuk memanipulasi gambar menjadi seolah-olah hidup dan bergerak, yang terdiri dari animasi 2 dimensi maupun 3 dimensi. Animasi 2D membuat benda seolah hidup dengan mengunakan kertas atau komputer. Pada pengabdian ini metode yang digunakan yaitu pertama membentuk model kemudian model tersebut diberi warna, serta dibuat scenario dari model yang telah dibuat. Seluruh proses pembuatannya dari awal hingga akhir dikerjakan di komputer. Pada pelatihan Animasi ini siswa akan diarahkan untuk tujuan pendidikan yang berguna untuk memperjelaskan tentang koordinasi gerak, di mana dalam satu gerakan badan diperlihatkan gerakan tulang-tulang serta sendi tertentu serta hubungannya dengan gerak otot, yang mana otot yang meregang serta otot mana yang melakukan gerakan menarik. Dalam pembuatan video animasi ini pelatihan menggunakan software Amorik2D yang dibuat dan dikembangkan oleh instruktur tim. Aplikasi grafik dan pembuatan video animasi bertujuan agar Siswa mampu membuat gerakan animasi yang baik dan mampu mengelola pembuatan animasi secara beregu. Pesantren Tahfidz Darussofa Desa Ciburayut Bogor bergerak di bidang pendidikan khususnya melatih santri dan calon hafidz dan sesuai dengan perkembangan jaman, para santri dituntut untuk bisa menguasai teknologi informasi yang nanti dapat mendukung dalam proses belajar.
- Open Access
- 1 April 2019
- Published by Universitas Ahmad Dahlan in TELKOMNIKA (Telecommunication Computing Electronics and Control)
- Vol. 17 (2) , 580-585
Detection of immovable objects on visually impaired people walking aids
One consequence of a visually impaired (blind) person is a lack of ability in the activities related to the orientation and mobility. Blind person uses a stick as a tool to know the objects that surround him/her.The objective of this research is to develop a tool for blind person which is able to recognize what object in front of him/her when he/she is walking. An attached camera will obtain an image of an object which is then processed using template matching method to identify and trace the image of the object. After getting the image of the object, furthermore calculate and compare it with the data training. The output is produced in the form of sound that in accordance with the object. The result of this research is that the best slope and distance for the template matching method to properly detect silent objects is 90 degrees and 2 meters.
- 1 April 2019
- Published by Universitas Ahmad Dahlan in TELKOMNIKA (Telecommunication Computing Electronics and Control)
- Vol. 17 (2) , 580-585
Open AccessDetection of immovable objects on visually impaired people walking aids
One consequence of a visually impaired (blind) person is a lack of ability in the activities related to the orientation and mobility. Blind person uses a stick as a tool to know the objects that surround him/her.The objective of this research is to develop a tool for blind person which is able to recognize what object in front of him/her when he/she is walking. An attached camera will obtain an image of an object which is then processed using template matching method to identify and trace the image of the object. After getting the image of the object, furthermore calculate and compare it with the data training. The output is produced in the form of sound that in accordance with the object. The result of this research is that the best slope and distance for the template matching method to properly detect silent objects is 90 degrees and 2 meters.
- Open Access
- 26 October 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 218, 03002
KWh Meter Smart Card Model Token For Electrical Energy Monitoring
This research Producer Electric meter Appliance model base on smart card kWh (kilo Watt hour). The card power meter Is use to calculate the prepaid electricity meter using the 20-digit voucher number as a charging medium. Utilizing a smart card, the token number in the prepaid electricity meter can help reduce the error rate when entering the token number, the model destination is created. Hardware design and with apps to detect how much energy is used to store basic data to help view history of usage. Using smart cards and microcontrollers in apps that come from a usage history in the Pulse usage category will help users know their usage in efficient, normal, and wasteful categories. The results of this research is a meter model with credit card for charging pulses, and data processing applications as devices that can be used for various electricity consumption. The information system is used as a model validation with pulse input that provides information about the use of electrical energy and as a determinant to save the time and time required to make optimal energy
- 26 October 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 218, 03002
Open AccessKWh Meter Smart Card Model Token For Electrical Energy Monitoring
This research Producer Electric meter Appliance model base on smart card kWh (kilo Watt hour). The card power meter Is use to calculate the prepaid electricity meter using the 20-digit voucher number as a charging medium. Utilizing a smart card, the token number in the prepaid electricity meter can help reduce the error rate when entering the token number, the model destination is created. Hardware design and with apps to detect how much energy is used to store basic data to help view history of usage. Using smart cards and microcontrollers in apps that come from a usage history in the Pulse usage category will help users know their usage in efficient, normal, and wasteful categories. The results of this research is a meter model with credit card for charging pulses, and data processing applications as devices that can be used for various electricity consumption. The information system is used as a model validation with pulse input that provides information about the use of electrical energy and as a determinant to save the time and time required to make optimal energy
- Open Access
- 15 September 2018
- Published by Universitas Udayana in Lontar Komputer : Jurnal Ilmiah Teknologi Informasi
- p. 72-80
The Obstacles Detector with Tahani Fuzzy Logic as The Tool for Blind People
Indonesian Blind Union said that the number of blind people in Indonesia reached 3.75 million and 40% in school-age children, and this number will continue to increase each year. Blind people will need the tool to help their day to day activities. The research that has been developed still have flaws, whereas they do not provide the sound of information to the people with visual impairment about the obstacle, included no scientific method used in the research, especially about how the appliance works. This research does not only provide ‘beep’ sound when obstacles are detected, but also provides audio information through a headset to the blind people. There are three obstacles detected, they are holes, bumps, and walls, and it can help the blind people to decide whether to dodge or to step high. To support the audio output and the design processing speed of the appliance, this research uses Raspberry Pi 3 mini PC, three ultrasonic sensors that are used to detect obstruction objects upright, hole and bump, and to initialize the initial values before it detects the obstruction. Tahani fuzzy logic method used to different obstacles such as the bumps, flat surfaces, or holes so the blind people feel much safer while walking.
- 15 September 2018
- Published by Universitas Udayana in Lontar Komputer : Jurnal Ilmiah Teknologi Informasi
- p. 72-80
Open AccessThe Obstacles Detector with Tahani Fuzzy Logic as The Tool for Blind People
Indonesian Blind Union said that the number of blind people in Indonesia reached 3.75 million and 40% in school-age children, and this number will continue to increase each year. Blind people will need the tool to help their day to day activities. The research that has been developed still have flaws, whereas they do not provide the sound of information to the people with visual impairment about the obstacle, included no scientific method used in the research, especially about how the appliance works. This research does not only provide ‘beep’ sound when obstacles are detected, but also provides audio information through a headset to the blind people. There are three obstacles detected, they are holes, bumps, and walls, and it can help the blind people to decide whether to dodge or to step high. To support the audio output and the design processing speed of the appliance, this research uses Raspberry Pi 3 mini PC, three ultrasonic sensors that are used to detect obstruction objects upright, hole and bump, and to initialize the initial values before it detects the obstruction. Tahani fuzzy logic method used to different obstacles such as the bumps, flat surfaces, or holes so the blind people feel much safer while walking.
- Open Access
- 21 March 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 974 (1) , 012009
Dynamic Segmentation Of Behavior Patterns Based On Quantity Value Movement Using Fuzzy Subtractive Clustering Method
To understand by analyzing the pattern of changes in value movements that can dynamically vary over a given period with relative accuracy, an equipment is required based on the utilization of technical working principles or specific analytical method. This will affect the level of validity of the output that will occur from this system. Subtractive clustering is based on the density (potential) size of data points in a space (variable). The basic concept of subtractive clustering is to determine the regions in a variable that has high potential for the surrounding points. In this paper result is segmentation of behavior pattern based on quantity value movement. It shows the number of clusters is formed and that has many members.
- 21 March 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 974 (1) , 012009
Open AccessDynamic Segmentation Of Behavior Patterns Based On Quantity Value Movement Using Fuzzy Subtractive Clustering Method
To understand by analyzing the pattern of changes in value movements that can dynamically vary over a given period with relative accuracy, an equipment is required based on the utilization of technical working principles or specific analytical method. This will affect the level of validity of the output that will occur from this system. Subtractive clustering is based on the density (potential) size of data points in a space (variable). The basic concept of subtractive clustering is to determine the regions in a variable that has high potential for the surrounding points. In this paper result is segmentation of behavior pattern based on quantity value movement. It shows the number of clusters is formed and that has many members.
- Open Access
- 21 March 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 974 (1) , 012007
MoREK: The learning media to improve students understanding about electrical circuit in informatics
The needs for labor in the world is already increasing especially in Indonesia. According to the World Bank, Indonesia is a country that ranks 9th in the world's largest economic growth. To meet that needs, Indonesia needs 55 million workers who are experts in the field of electricity. Therefore, it takes a lot of human resources and has been equipped with knowledge and expertise in the field of electricity. To be able to meet these needs, it takes a better method of learning to increase knowledge and expertise in the field of electricity since college, especially in the field of informatics. Prototype of Electrical Module (The MoREK) requires a Prototype method for the Practicum Module to be created as desired. This method is often used in the real world or it could be said Prototype method is part of the product that expresses the logic and physical external interface that is displayed. For data retrieval is used Pre-experimental method where students will be given pre-test and post-test. The Design of Electrical Module has a purpose to improve the students understanding of Electric Circuit Engineering Courses with the creation of The MoREK so that students are more competent to the course and can meet the needs of manpower or Human Resources (SDM) in the field of electricity. By using The Morek, the score of student learning outcomes increased by 7.8% and informatics students who conduct research in the field of electricity increased to 21%.
- 21 March 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 974 (1) , 012007
Open AccessMoREK: The learning media to improve students understanding about electrical circuit in informatics
The needs for labor in the world is already increasing especially in Indonesia. According to the World Bank, Indonesia is a country that ranks 9th in the world's largest economic growth. To meet that needs, Indonesia needs 55 million workers who are experts in the field of electricity. Therefore, it takes a lot of human resources and has been equipped with knowledge and expertise in the field of electricity. To be able to meet these needs, it takes a better method of learning to increase knowledge and expertise in the field of electricity since college, especially in the field of informatics. Prototype of Electrical Module (The MoREK) requires a Prototype method for the Practicum Module to be created as desired. This method is often used in the real world or it could be said Prototype method is part of the product that expresses the logic and physical external interface that is displayed. For data retrieval is used Pre-experimental method where students will be given pre-test and post-test. The Design of Electrical Module has a purpose to improve the students understanding of Electric Circuit Engineering Courses with the creation of The MoREK so that students are more competent to the course and can meet the needs of manpower or Human Resources (SDM) in the field of electricity. By using The Morek, the score of student learning outcomes increased by 7.8% and informatics students who conduct research in the field of electricity increased to 21%.
- Open Access
- 14 October 2017
- Published by Universitas Muhammadiyah Tangerang in JIKA (Jurnal Informatika)
- Vol. 1 (2)
Sistem E-Learning Terintegrasi Web Sebagai Solusi Dalam Meningkatkan Kualitas Pendidikan Dan Pembelajaran Mahasiswa
Learning media is one fairly important part in the implementation of lectures, given the variety of obstacles and challenges that would be found during college. The role of instructional media is often overlooked, so that students not uncommon to feel tired and bored in a lecture which resulted in less than optimal results. Especially if the result of courses that only limited interaction in the classroom less use of media that actually existed even less than the maximum.Web design media applications E-learning is one solution, using a web-based Java and MySQL database in the making. And using SDLC approach in its implementation, and strengthened by the questionnaire in the process of making this application.Designing web application e-learning is intended to facilitate the process of actual lectures can be done anywhere and anytime with the data material and quiz subjects more safely and effectively stored in the application database.
- 14 October 2017
- Published by Universitas Muhammadiyah Tangerang in JIKA (Jurnal Informatika)
- Vol. 1 (2)
Open AccessSistem E-Learning Terintegrasi Web Sebagai Solusi Dalam Meningkatkan Kualitas Pendidikan Dan Pembelajaran Mahasiswa
Learning media is one fairly important part in the implementation of lectures, given the variety of obstacles and challenges that would be found during college. The role of instructional media is often overlooked, so that students not uncommon to feel tired and bored in a lecture which resulted in less than optimal results. Especially if the result of courses that only limited interaction in the classroom less use of media that actually existed even less than the maximum.Web design media applications E-learning is one solution, using a web-based Java and MySQL database in the making. And using SDLC approach in its implementation, and strengthened by the questionnaire in the process of making this application.Designing web application e-learning is intended to facilitate the process of actual lectures can be done anywhere and anytime with the data material and quiz subjects more safely and effectively stored in the application database.
- 1 January 2017
- Published by AIP Publishing
RESLanjut: The learning media for improve students understanding in embedded systems
The use of network in embedded system can be done with many kinds of network, with the use of mobile phones, bluetooths, modems, ethernet cards, wireless technology and so on. Using network in embedded system could help people to do remote controlling. On previous research, researchers found that many students have the ability to comprehend the basic concept of embedded system. They could also make embedded system tools but without network integration. And for that, a development is needed for the embedded system module. The embedded system practicum module design needs a prototype method in order to achieve the desired goal. The prototype method is often used in the real world. Or even, a prototype method is a part of products that consist of logic expression or external physical interface. The embedded system practicum module is meant to increase student comprehension of embedded system course, and also to encourage students to innovate on technology based tools. It is also meant to help teachers to teach the embedded system concept on the course. The student comprehension is hoped to increase with the use of practicum course.
- 1 January 2017
- Published by AIP Publishing
RESLanjut: The learning media for improve students understanding in embedded systems
The use of network in embedded system can be done with many kinds of network, with the use of mobile phones, bluetooths, modems, ethernet cards, wireless technology and so on. Using network in embedded system could help people to do remote controlling. On previous research, researchers found that many students have the ability to comprehend the basic concept of embedded system. They could also make embedded system tools but without network integration. And for that, a development is needed for the embedded system module. The embedded system practicum module design needs a prototype method in order to achieve the desired goal. The prototype method is often used in the real world. Or even, a prototype method is a part of products that consist of logic expression or external physical interface. The embedded system practicum module is meant to increase student comprehension of embedded system course, and also to encourage students to innovate on technology based tools. It is also meant to help teachers to teach the embedded system concept on the course. The student comprehension is hoped to increase with the use of practicum course.