RVRohan Vernekar

Rohan Vernekar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Rohan Vernekar has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Hydrodynamics in a villi-patterned channel due to pendular-wave activity

    by Rohan Vernekar, Faisal Ahmad, Martin Garic, Dácil Idaira Yánez Martín, Claude Loverdo, Stéphane Tanguy, Clément de Loubens

    Inspired by small intestine motility, we investigate the flow induced by a propagating pendular wave along the walls of a channel lined with rigid, villi-like microstructures. The villi undergo harmonic axial oscillations with a phase lag relative to their neighbours, generating travelling patterns of intervillous contraction. Using two-dimensional lattice Boltzmann simulations, we resolve the flow within the villi zone and the lumen, sampling small to moderate Womersley numbers. We uncover a mixing boundary layer (MBL) just above the villi, composed of semi-vortical structures that travel with the imposed wave. In the lumen, an axial steady flow emerges, surprisingly oriented opposite to the wave propagation direction, contrary to canonical peristaltic flows. We attribute this flow reversal to the non-reciprocal trajectories of fluid trapped between adjacent villi and derive a geometric scaling law that captures its magnitude in the Stokes regime. The MBL thickness is found to depend solely on the wave kinematics given by intervillous phase lag in the low-inertia limit. Above a critical threshold, oscillatory inertia induces dynamic confinement, limiting the radial extent of the MBL and leading to non-monotonic behaviour of the axial steady flux. We further develop an effective boundary condition at the villus tips, incorporating both steady and oscillatory components across relevant spatial scales. This framework enables coarse-grained simulations of intestinal flows without resolving individual villi. Our results shed light on the interplay among active microstructure, pendular wave and finite inertia in biological flows, and suggests new avenues for flow control in biomimetic and microfluidic systems.


  • Open Access

    Numerical analysis of flow anisotropy in rotated-square deterministic lateral displacement devices at moderate Reynolds number

    by Calum Mallorie, Rohan Vernekar, Benjamin Owen, David W. Inglis, Timm Krüger

    Deterministic lateral displacement (DLD) is a microfluidic method for accurately separating particles by size or deformability. Recent efforts to operate DLD devices in the inertial, rather than in the Stokes flow regime, have been hindered by a loss of separation efficiency and difficulty predicting the separation behavior. One factor contributing to these problems is the onset of inertia-induced flow anisotropy where the average flow direction does not align with the direction of the pressure gradient in the device. We use the lattice-Boltzmann method to simulate two-dimensional flow through a rotated-square DLD geometry with circular pillars at a Reynolds number up to 100 for different gap sizes and rotation angles. We find that anisotropy in this geometry is a nonmonotonous function of Reynolds number and can be positive or negative. This finding is in contradiction to the naive expectation that inertia would always drive flow along the principal direction of the pillar array. Anisotropy tends to increase in magnitude with gap size and rotation angle. By analyzing the traction distribution along the pillar surface, we explain how the change of the flow field upon increasing inertia leads to the observed trends of anisotropy. Our work contributes to a better understanding of the inertial flow behavior in ordered cylindrical porous media, and it might contribute to improved DLD designs for operation in the inertial regime. Published by the American Physical Society 2024


  • Open Access

    Numerical analysis of flow anisotropy in rotated-square deterministic lateral displacement devices at moderate Reynolds number

    by Calum Mallorie, Rohan Vernekar, Benjamin Owen, David W. Inglis, Timm Krüger

    Deterministic lateral displacement (DLD) is a microfluidic method for accurately separating particles by size or deformability. Recent efforts to operate DLD devices in the inertial, rather than in the Stokes, flow regime have been hindered by a loss of separation efficiency and difficulty predicting the separation behaviour. One factor contributing to these problems is the onset of inertia-induced flow anisotropy where the average flow direction does not align with the direction of the pressure gradient in the device. We use the lattice-Boltzmann method to simulate two-dimensional flow through a rotated-square DLD geometry with circular pillars at Reynolds number up to 100 for different gap sizes and rotation angles. We find that anisotropy in this geometry is a non-monotonous function of Reynolds number and can be positive or negative. This finding is in contradiction to the naive expectation that inertia would always drive flow along principal direction of the pillar array. Anisotropy tends to increase in magnitude with gap size and rotation angle. By analysing the traction distribution along the pillar surface, we explain how the change of the flow field upon increasing inertia leads to the observed trends of anisotropy. Our work contributes to a better understanding of the inertial flow behaviour in ordered cylindrical porous media, and might contribute to improved DLD designs for operation in the inertial regime.

  • Open Access

    Lattice-Boltzmann modelling for inertial particle microfluidics applications - a tutorial review

    by Benjamin Owen, Konstantinos Kechagidis, Sajad Razavi Bazaz, Romain Enjalbert, Erich Essmann, Calum Mallorie, Fatemehsadat Mirghaderi, Christian Schaaf, Krishnaveni Thota, Rohan Vernekar, et al.


  • Open Access

    Lattice-Boltzmann Modelling for Inertial Particle Microfluidics Applications — A Tutorial Review

    by Benjamin Owen, Konstantinos Kechagidis, Sajad Razavi Bazaz, Romain Enjalbert, Erich Essmann, Calum Mallorie, Fatemehsadat Mirghaderi, Christian Schaaf, Krishnaveni Thota, Rohan Vernekar, et al.

    Inertial particle microfluidics (IPMF) is an emerging technology for the manipulation and separation of microparticles and biological cells. Since the flow physics of IPMF is complex and experimental studies are often time-consuming or costly, computer simulations can offer complementary insights. In this tutorial review, we provide a guide for researchers who are exploring the potential of the lattice-Boltzmann (LB) method for simulating IPMF applications. We first review the existing literature to establish the state of the art of LB-based IPMF modelling. After summarising the physics of IPMF, we then present related methods used in LB models for IPMF and show several case studies of LB simulations for a range of IPMF scenarios. Finally, we conclude with an outlook and several proposed research directions.


  • Open Access

    Anisotropic permeability in deterministic lateral displacement arrays

    by Rohan Vernekar, Timm Krüger, Kevin Loutherback, Keith Morton, David W. Inglis

    We uncover anisotropic permeability in microfluidic deterministic lateral displacement (DLD) arrays. A DLD array can achieve high-resolution bimodal size-based separation of microparticles, including bioparticles, such as cells. For an application with a given separation size, correct device operation requires that the flow remains at a fixed angle to the obstacle array. We demonstrate via experiments and lattice-Boltzmann simulations that subtle array design features cause anisotropic permeability. Anisotropic permeability indicates the microfluidic array's intrinsic tendency to induce an undesired lateral pressure gradient. This can cause an inclined flow and therefore local changes in the critical separation size. Thus, particle trajectories can become unpredictable and the device useless for the desired separation task. Anisotropy becomes severe for arrays with unequal axial and lateral gaps between obstacle posts and highly asymmetric post shapes. Furthermore, of the two equivalent array layouts employed with the DLD, the rotated-square layout does not display intrinsic anisotropy. We therefore recommend this layout over the easier-to-implement parallelogram layout. We provide additional guidelines for avoiding adverse effects of anisotropy on the DLD.


  • Breakdown of deterministic lateral displacement efficiency for non-dilute suspensions: A numerical study

    by R. Vernekar, T. Krüger

    We investigate the effect of particle volume fraction on the efficiency of deterministic lateral displacement (DLD) devices. DLD is a popular passive sorting technique for microfluidic applications. Yet, it has been designed for treating dilute suspensions, and its efficiency for denser samples is not well known. We perform 3D simulations based on the immersed-boundary, lattice-Boltzmann and finite-element methods to model the flow of red blood cells (RBCs) in different DLD devices. We quantify the DLD efficiency in terms of appropriate "failure" probabilities and RBC counts in designated device outlets. Our main result is that the displacement mode breaks down upon an increase of RBC volume fraction, while the zigzag mode remains relatively robust. This suggests that the separation of larger particles (such as white blood cells) from a dense RBC background is simpler than separating smaller particles (such as platelets) from the same background. The observed breakdown stems from non-deterministic particle collisions interfering with the designed deterministic nature of DLD devices. Therefore, we postulate that dense suspension effects generally hamper efficient particle separation in devices based on deterministic principles.


  • Lattice Boltzmann Method Applied to Radiative Transport Analysis in a Planar Participating Medium

    by Subhash C. Mishra, Himanshu Poonia, Rohan R. Vernekar, Arup K. Das