Chinnu Venkateswaran
Research Subjects
Chinnu Venkateswaran has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Rahul Vaish
School of Mechanical and Materials Engineering, Indian Institute of Technology Mandi, Mandi, India
4 shared publications Bhanu Pant
Vikram Sarabhai Space Centre ISRO Thiruvananthapuram India
2 shared publicationsSharad C. Sharma
Vikram Sarabhai Space Centre ISRO Thiruvananthapuram India
2 shared publicationsVishal S. Chauhan
School of Engineering Indian Institute of Technology Mandi India
2 shared publications- Amarnath Reddy Allu
CSIR‐Central Glass and Ceramic Research Institute Kolkata India
1 shared publication - Anuraag Gaddam
CICECO–Aveiro Institute of Materials Department of Chemistry University of Aveiro Santiago University Campus Aveiro Portugal
1 shared publication
Latest Publications
- 15 February 2025
- Published by Elsevier in Acta Materialia
- Vol. 288
Mixed network former effect on the ion-dynamics of Sodium Alumino-Phospho-Silicate glasses
- 15 February 2025
- Published by Elsevier in Acta Materialia
- Vol. 288
Mixed network former effect on the ion-dynamics of Sodium Alumino-Phospho-Silicate glasses
- Top Cited Papers
- 22 November 2021
- Published by SAGE Publications in International Materials Reviews
- Vol. 67 (6) , 620-657
Lithium aluminosilicate (LAS) glass-ceramics: a review of recent progress
The lithium aluminosilicate system (LAS) is being explored for almost seven decades due to its anomalous and attractive properties (especially low/negative thermal expansion and fast ion conduction) and its commercial significance in consumer as well as strategic sectors. This review introduces current commercial applications of LAS systems, necessary background science, structural features of different LAS crystal systems, including their polymorphs and solid-solutions, and the origin of unusual properties. Significant emphasis is provided on processing transparent, nanocrystalline, low thermal expansion glass-ceramic (LEGC), the role of chemical constituents and additives, the effect of heat-treatment, and microstructural evolution while processing LEGC. Detailed discussions are provided on the following areas: LAS matrix composites, chemical strengthening of glass and glass-ceramic, low temperature co-fired ceramics (LTCC) and associated joining technologies (hydrolysis catalysis bonding, anodic bonding, brazing, etc.) that would further extend the application portfolio of LAS system.
- 22 November 2021
- Published by SAGE Publications in International Materials Reviews
- Vol. 67 (6) , 620-657
Top Cited PapersLithium aluminosilicate (LAS) glass-ceramics: a review of recent progress
The lithium aluminosilicate system (LAS) is being explored for almost seven decades due to its anomalous and attractive properties (especially low/negative thermal expansion and fast ion conduction) and its commercial significance in consumer as well as strategic sectors. This review introduces current commercial applications of LAS systems, necessary background science, structural features of different LAS crystal systems, including their polymorphs and solid-solutions, and the origin of unusual properties. Significant emphasis is provided on processing transparent, nanocrystalline, low thermal expansion glass-ceramic (LEGC), the role of chemical constituents and additives, the effect of heat-treatment, and microstructural evolution while processing LEGC. Detailed discussions are provided on the following areas: LAS matrix composites, chemical strengthening of glass and glass-ceramic, low temperature co-fired ceramics (LTCC) and associated joining technologies (hydrolysis catalysis bonding, anodic bonding, brazing, etc.) that would further extend the application portfolio of LAS system.
- 9 March 2021
- Published by Wiley in International Journal of Applied Glass Science
- Vol. 13 (1) , 41-53
Crystallization and sintering studies on an anomalous Li 2 O‐Al 2 O 3 ‐SiO 2 glass for making tunable thermal expansion ceramic
This work is an attempt to understand the crystallization behavior of unconventional LAS (1:1.2:7) composition having MgO, BaO, K 2 O, and ZrO 2 . Crystallization parameters were determined using thermo‐analytical models based on differential scanning calorimetry (DSC). The activation energy of crystallization, E , and frequency factor, were calculated to be 354.40 kJ mol –1 K –1 and 1.63 × 10 15 , respectively. Effect of sintering temperature on density, phase constitution, thermal expansion, and microstructure is reported herein. The temperature range between 1373 K and 1473 K was found to be the optimum window for sintering the glass particles. Glass‐ceramic with CTE matching the Fe–Ni alloy is reported herein. Considering the LAS glass system's better sinterability, efforts were made toward sintering alumina with LAS glass as a sintering aid. The 5 wt%. LAS/Al 2 O 3 composite was prepared with density: 3.6 g/cm 3 , relative permittivity 10.5, and dielectric loss tangent 2.45 × 10 ‐3 . This composition was found to be a potential CTE compensator material while processing tailorable CTE ceramics.
- 9 March 2021
- Published by Wiley in International Journal of Applied Glass Science
- Vol. 13 (1) , 41-53
Crystallization and sintering studies on an anomalous Li 2 O‐Al 2 O 3 ‐SiO 2 glass for making tunable thermal expansion ceramic
This work is an attempt to understand the crystallization behavior of unconventional LAS (1:1.2:7) composition having MgO, BaO, K 2 O, and ZrO 2 . Crystallization parameters were determined using thermo‐analytical models based on differential scanning calorimetry (DSC). The activation energy of crystallization, E , and frequency factor, were calculated to be 354.40 kJ mol –1 K –1 and 1.63 × 10 15 , respectively. Effect of sintering temperature on density, phase constitution, thermal expansion, and microstructure is reported herein. The temperature range between 1373 K and 1473 K was found to be the optimum window for sintering the glass particles. Glass‐ceramic with CTE matching the Fe–Ni alloy is reported herein. Considering the LAS glass system's better sinterability, efforts were made toward sintering alumina with LAS glass as a sintering aid. The 5 wt%. LAS/Al 2 O 3 composite was prepared with density: 3.6 g/cm 3 , relative permittivity 10.5, and dielectric loss tangent 2.45 × 10 ‐3 . This composition was found to be a potential CTE compensator material while processing tailorable CTE ceramics.
- 1 December 2020
- Published by Elsevier in Journal of Non-Crystalline Solids
- Vol. 550
Processing Li2O-Al2O3-SiO2 (LAS) glass-ceramic with and without P2O5 through bulk and sintering route
- 1 December 2020
- Published by Elsevier in Journal of Non-Crystalline Solids
- Vol. 550
Processing Li2O-Al2O3-SiO2 (LAS) glass-ceramic with and without P2O5 through bulk and sintering route
- 12 September 2017
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 101 (1) , 140-150
Near‐zero thermal expansion transparent lithium aluminosilicate glass‐ceramic by microwave hybrid heat treatment
The material of choice for space applications which demand very high dimensional stability is lithium aluminosilicate ( LAS ) based Ultra Low thermal Expansion Glass‐Ceramic ( ULEGC ). Generally, the controlled crystallization process recommended for the processing of transparent ULEGC involves a long soaking duration to achieve the required crystal number density. This paper brings out the process optimization procedure adopted for realizing transparent and nanocrystalline ULEGC from conventionally processed LAS glass using microwave‐assisted (hybrid) crystallization. The experimental strategy involves two stages (i) identification of the optimum crystallization temperature ( T c ) under a microwave field (ii) optimization of a microwave‐assisted crystallization process to achieve near zero Coefficient of Thermal Expansion (CTE).. Optimum heat‐treatment schedules for nucleation and crystallization under a microwave environment were found to be 720°C/24 hours and 775°C/0.3 hours, respectively. The optimized heat‐treatment condition revealed the efficacy of the microwave hybrid heating, by producing nanocrystalline (35‐50 nm) and transparent (>82%) ULEGC having a thermal expansion of −0.03 × 10 −6 K (0°C to 50°C).
- 12 September 2017
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 101 (1) , 140-150
Near‐zero thermal expansion transparent lithium aluminosilicate glass‐ceramic by microwave hybrid heat treatment
The material of choice for space applications which demand very high dimensional stability is lithium aluminosilicate ( LAS ) based Ultra Low thermal Expansion Glass‐Ceramic ( ULEGC ). Generally, the controlled crystallization process recommended for the processing of transparent ULEGC involves a long soaking duration to achieve the required crystal number density. This paper brings out the process optimization procedure adopted for realizing transparent and nanocrystalline ULEGC from conventionally processed LAS glass using microwave‐assisted (hybrid) crystallization. The experimental strategy involves two stages (i) identification of the optimum crystallization temperature ( T c ) under a microwave field (ii) optimization of a microwave‐assisted crystallization process to achieve near zero Coefficient of Thermal Expansion (CTE).. Optimum heat‐treatment schedules for nucleation and crystallization under a microwave environment were found to be 720°C/24 hours and 775°C/0.3 hours, respectively. The optimized heat‐treatment condition revealed the efficacy of the microwave hybrid heating, by producing nanocrystalline (35‐50 nm) and transparent (>82%) ULEGC having a thermal expansion of −0.03 × 10 −6 K (0°C to 50°C).