Hesham Abdualla
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hesham Abdualla has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Halil Ceylan
Iowa State University
5 shared publications - Sunghwan Kim
Iowa State Univ
5 shared publications - Kasthurirangan Gopalakrishnan
Research Associate Professor, Iowa State Univ
4 shared publications - Kristen Cetin
Department of Civil and Environmental Engineering, Michigan State University, East lansing, USA
4 shared publications - Peter Taylor
Department of Civil, Construction & Environmental Engineering, Iowa State University, Ames, IA 50011, USA
4 shared publications - Bora Cetin
Department of Civil and Environmental Engineering, Michigan State University, East lansing, USA
2 shared publications
Latest Publications
- 12 August 2018
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2672 (23) , 82-94
Design and Construction of the World’s First Full-Scale Electrically Conductive Concrete Heated Airport Pavement System at a U.S. Airport
Airport agencies spend millions of dollars to remove ice and snow from airport pavement surfaces to achieve accessible, safe, and sustainable operations during the winter. Electrically conductive concrete (ECON) based heated pavement system (HPS) has gained attention as a promising alternative technology for preventing snow and ice accumulation by maintaining pavement surface temperatures above the freezing point. The objective of this study was to demonstrate the world’s first full-scale ECON-based HPS at a U.S. airport. Two ECON slabs were designed and constructed in the General Aviation (GA) apron at the Des Moines International Airport (DSM), Iowa in 2016. Systematic design components were identified, and construction procedures were developed and implemented for ECON-based HPS. Using collected sensor data, the performance of the constructed and remotely-operated ECON slabs was evaluated under real weather conditions at DSM in the 2016–2017 winter season. The results demonstrate that ECON-based HPS have promising deicing and anti-icing capacities, promising to provide uniform heat distribution and prevent snow and ice accumulations on the entire area of application under various winter weather conditions, including extreme cold weather (i.e., arctic blasts).
- 12 August 2018
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2672 (23) , 82-94
Design and Construction of the World’s First Full-Scale Electrically Conductive Concrete Heated Airport Pavement System at a U.S. Airport
Airport agencies spend millions of dollars to remove ice and snow from airport pavement surfaces to achieve accessible, safe, and sustainable operations during the winter. Electrically conductive concrete (ECON) based heated pavement system (HPS) has gained attention as a promising alternative technology for preventing snow and ice accumulation by maintaining pavement surface temperatures above the freezing point. The objective of this study was to demonstrate the world’s first full-scale ECON-based HPS at a U.S. airport. Two ECON slabs were designed and constructed in the General Aviation (GA) apron at the Des Moines International Airport (DSM), Iowa in 2016. Systematic design components were identified, and construction procedures were developed and implemented for ECON-based HPS. Using collected sensor data, the performance of the constructed and remotely-operated ECON slabs was evaluated under real weather conditions at DSM in the 2016–2017 winter season. The results demonstrate that ECON-based HPS have promising deicing and anti-icing capacities, promising to provide uniform heat distribution and prevent snow and ice accumulations on the entire area of application under various winter weather conditions, including extreme cold weather (i.e., arctic blasts).
- 11 July 2018
- Published by American Society of Civil Engineers (ASCE)
- p. 25-35
Implementing Advanced Wireless Sensing System for Airfield Pavement Condition Monitoring
Real-time monitoring of pavement conditions is beneficial not only to more accurate predictions of airport pavement performance but also to more efficient pavement management activities. Although wireless-based sensing system have shown some advantages compared to wired sensing system, there are just few studies that describe instrumenting wireless sensors in the field for pavement condition monitoring. To bridge this gap, this paper presents case studies describing use of advanced wireless sensing system for airport pavement conditions monitoring at three test sites: the Des Moines International Airport (DSM), the Ohio State University (OSU) Airport, and the Texas A&M University (TAMU) Airport. The wireless sensors communicate through a gateway to collect sensor data and then upload it to the cloud. The wireless sensor instrumentation strategy and design plans, based on the field instrumentation experience, are summarized. The key requirements and potential restrictions for implementing wireless sensing systems in airfield pavement are also discussed.
- 11 July 2018
- Published by American Society of Civil Engineers (ASCE)
- p. 25-35
Implementing Advanced Wireless Sensing System for Airfield Pavement Condition Monitoring
Real-time monitoring of pavement conditions is beneficial not only to more accurate predictions of airport pavement performance but also to more efficient pavement management activities. Although wireless-based sensing system have shown some advantages compared to wired sensing system, there are just few studies that describe instrumenting wireless sensors in the field for pavement condition monitoring. To bridge this gap, this paper presents case studies describing use of advanced wireless sensing system for airport pavement conditions monitoring at three test sites: the Des Moines International Airport (DSM), the Ohio State University (OSU) Airport, and the Texas A&M University (TAMU) Airport. The wireless sensors communicate through a gateway to collect sensor data and then upload it to the cloud. The wireless sensor instrumentation strategy and design plans, based on the field instrumentation experience, are summarized. The key requirements and potential restrictions for implementing wireless sensing systems in airfield pavement are also discussed.
- 11 July 2018
- Published by American Society of Civil Engineers (ASCE)
- p. 16-24
Hydronic Heated Pavement System Using Precast Concrete Pavement for Airport Applications
The use of deicing chemical has the potential to cause environmental and safety concerns and pavement deterioration. Hydronic heated pavement systems (HHPS) have been widely used to melt or prevent ice and snow accumulation on paved surfaces. HHPS uses heated fluid circulated through pipes embedded in the concrete pavement to warm the surface of the concrete. The objective of this study is to develop a conceptual design framework and construction guidance for large-scale HHPS using precast concrete pavement (PCP) technology to expedite construction work and minimize air travel disruption. The detailed design and 3-D visualization of construction procedures has been developed for HHPS using PCP technology. The outcome of this study will help contractors and transportation agencies to envision the constructability of different components in HHPS, including tubing patterns and construction procedures.
- 11 July 2018
- Published by American Society of Civil Engineers (ASCE)
- p. 16-24
Hydronic Heated Pavement System Using Precast Concrete Pavement for Airport Applications
The use of deicing chemical has the potential to cause environmental and safety concerns and pavement deterioration. Hydronic heated pavement systems (HHPS) have been widely used to melt or prevent ice and snow accumulation on paved surfaces. HHPS uses heated fluid circulated through pipes embedded in the concrete pavement to warm the surface of the concrete. The objective of this study is to develop a conceptual design framework and construction guidance for large-scale HHPS using precast concrete pavement (PCP) technology to expedite construction work and minimize air travel disruption. The detailed design and 3-D visualization of construction procedures has been developed for HHPS using PCP technology. The outcome of this study will help contractors and transportation agencies to envision the constructability of different components in HHPS, including tubing patterns and construction procedures.
- 29 March 2018
- Published by American Society of Civil Engineers (ASCE)
- p. 551-561
Construction Techniques for Electrically Conductive Heated Pavement Systems
Ice and snow accumulation on airport paved surfaces has the potential to cause fatal accidents and monetary loss due to flight delays and cancellations. Traditional de-icing methods involving the application of chemicals or salt and employing large machines can create negative environmental and structural impact on airport infrastructure systems. These methods are also considered to be labor intensive and a safety hazard, especially in congested areas such as aprons. Heated pavement systems using electrically conductive concrete (ECON) have been proposed as a promising alternative technology for preventing ice accumulation and mitigating the adverse effects of using traditional snow removal methods. The objective of this study is to present information and experience about the design, construction procedures, and performance of heated pavement systems using jointed plain concrete pavements for the construction of large-scale heated airport pavements. It is based on detailed field demonstration of the electrically conductive concrete (ECON) heated pavement system (HPS) at the north general aviation (GA) apron of the Des Moines International Airport (DSM) in Iowa, in collaboration with contractors, and airport staff representatives. The expected outcome of this study will help the construction industry to better understand optimal ECON construction methods.
- 29 March 2018
- Published by American Society of Civil Engineers (ASCE)
- p. 551-561
Construction Techniques for Electrically Conductive Heated Pavement Systems
Ice and snow accumulation on airport paved surfaces has the potential to cause fatal accidents and monetary loss due to flight delays and cancellations. Traditional de-icing methods involving the application of chemicals or salt and employing large machines can create negative environmental and structural impact on airport infrastructure systems. These methods are also considered to be labor intensive and a safety hazard, especially in congested areas such as aprons. Heated pavement systems using electrically conductive concrete (ECON) have been proposed as a promising alternative technology for preventing ice accumulation and mitigating the adverse effects of using traditional snow removal methods. The objective of this study is to present information and experience about the design, construction procedures, and performance of heated pavement systems using jointed plain concrete pavements for the construction of large-scale heated airport pavements. It is based on detailed field demonstration of the electrically conductive concrete (ECON) heated pavement system (HPS) at the north general aviation (GA) apron of the Des Moines International Airport (DSM) in Iowa, in collaboration with contractors, and airport staff representatives. The expected outcome of this study will help the construction industry to better understand optimal ECON construction methods.
- 24 August 2017
- Published by American Society of Civil Engineers (ASCE)
- p. 1-9
Configuration of Electrodes for Electrically Conductive Concrete Heated Pavement Systems
This study investigates the effects of the type and configuration of embedded electrodes on resistive heating performance of an electrically conductive concrete (ECON) heated-pavement system (HPS). Three ECON slabs—an ECON slab with perforated galvanized steel angle electrodes, an ECON slab with steel rebar electrodes, and an ECON slab with perforated galvanized steel angle electrodes with an isolation layer—were designed and constructed. The resistive heating performance of the slabs was evaluated by measuring the electric current and ECON slab surface temperature at specific points during the application of voltage. The results revealed that the performance of the ECON slab with perforated galvanized steel angle electrodes was marginally changed when an isolation layer was used, so with respect to construction practice and cost considerations, an isolation layer is not deemed to be necessary for constructing large-scale ECON heated pavements. Electrical current measurements can be used for evaluating the conductivity and the heating capability of the ECON slabs.
- 24 August 2017
- Published by American Society of Civil Engineers (ASCE)
- p. 1-9
Configuration of Electrodes for Electrically Conductive Concrete Heated Pavement Systems
This study investigates the effects of the type and configuration of embedded electrodes on resistive heating performance of an electrically conductive concrete (ECON) heated-pavement system (HPS). Three ECON slabs—an ECON slab with perforated galvanized steel angle electrodes, an ECON slab with steel rebar electrodes, and an ECON slab with perforated galvanized steel angle electrodes with an isolation layer—were designed and constructed. The resistive heating performance of the slabs was evaluated by measuring the electric current and ECON slab surface temperature at specific points during the application of voltage. The results revealed that the performance of the ECON slab with perforated galvanized steel angle electrodes was marginally changed when an isolation layer was used, so with respect to construction practice and cost considerations, an isolation layer is not deemed to be necessary for constructing large-scale ECON heated pavements. Electrical current measurements can be used for evaluating the conductivity and the heating capability of the ECON slabs.