Aiguo Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Aiguo Wu has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Shijian Cang
Department of Product Design, Tianjin University of Science and Technology, Tianjin, China
3 shared publications - Zenghui Wang
University of South Africa
3 shared publications - Zengqiang Chen
School of Artificial Intelligence, Nankai University, Tianjin, China
3 shared publications - Haiwei Zhang
School of Electrical and Information Engineering, Tianjin University, Tianjin, China
2 shared publications - Chun Ho Wu
Department of Supply Chain and Information Management, The Hang Seng University of Hong Kong, Hong Kong SAR, China
1 shared publication - Haitang Wen
School of Electrical and Information Engineering, Tianjin University, Tianjin 300072, China
1 shared publication
Latest Publications
- Open Access
Research on Energy-Saving Control Strategies for Single-Effect Absorption Refrigeration Systems
The automatic control device is a critical component of absorption refrigeration systems. Its functional enhancement can reduce operating costs, improve energy efficiency, and ensure long-term stable unit operation. Given that absorption refrigeration systems operate under various dynamic conditions, the rational design of control strategies is particularly important. This study analyzes the influence of changes in the cooling water and heat source water flow rates on the outlet temperature of chilled water in the unit based on the open-loop response characteristics of absorption refrigeration systems. It proposes a dual-loop energy-saving control strategy for single-effect hot water lithium bromide absorption refrigeration systems based on the setpoint comprehensive optimization algorithm. Considering the multiple variables, strong coupling, large inertia, long time delay, and nonlinear characteristics of absorption refrigeration systems, as well as the difficulties in modeling these systems, this study applies a model-free adaptive control algorithm to the system’s control. It derives both SISO and MIMO model-free control algorithms with time-delay components. Through simulations comparing MFAC, improved MFAC, and traditional PID control, the dual-loop energy-saving control strategy is demonstrated to effectively reduce system heat consumption by approximately 20%, decrease power consumption by about 10%, and enhance the system’s SCOP by approximately 19.3%.
Open AccessResearch on Energy-Saving Control Strategies for Single-Effect Absorption Refrigeration Systems
The automatic control device is a critical component of absorption refrigeration systems. Its functional enhancement can reduce operating costs, improve energy efficiency, and ensure long-term stable unit operation. Given that absorption refrigeration systems operate under various dynamic conditions, the rational design of control strategies is particularly important. This study analyzes the influence of changes in the cooling water and heat source water flow rates on the outlet temperature of chilled water in the unit based on the open-loop response characteristics of absorption refrigeration systems. It proposes a dual-loop energy-saving control strategy for single-effect hot water lithium bromide absorption refrigeration systems based on the setpoint comprehensive optimization algorithm. Considering the multiple variables, strong coupling, large inertia, long time delay, and nonlinear characteristics of absorption refrigeration systems, as well as the difficulties in modeling these systems, this study applies a model-free adaptive control algorithm to the system’s control. It derives both SISO and MIMO model-free control algorithms with time-delay components. Through simulations comparing MFAC, improved MFAC, and traditional PID control, the dual-loop energy-saving control strategy is demonstrated to effectively reduce system heat consumption by approximately 20%, decrease power consumption by about 10%, and enhance the system’s SCOP by approximately 19.3%.
- 19 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 65 (2) , 599-600
Comments on “Common-Mode Noise Reduction by Parasitics Capacitance Cancellation in the Three-Phase Inverter”
This article comments on the published article titled “Common-mode noise reduction by parasitics capacitance cancellation in the three-phase inverter” authored by Zhang and Wu (2019). The three-terminal electromagnetic interference (EMI) filter can effectively suppress the EMI noise on the output side in the paper. The numerical analysis and the relationship of converting negative inductance into capacitance at high frequency are discussed in detail. Zhang and Wu (2019) presented a parasitic capacitance cancellation method to reduce the conducted emissions exiting a three-phase inverter. The idea of parasitic capacitance cancellation is not novel, and Wang and Lee (2007, 2010) originally applied it to reduce the common mode noise exiting a boost PFC converter. The parasitic capacitance cancellation of inductors is discussed in papers by Neugebauer and Perreault (2006) and Piboonwattanakit and Khan-Ngern (2008). These papers should be cited in the introduction and the references.
- 19 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 65 (2) , 599-600
Comments on “Common-Mode Noise Reduction by Parasitics Capacitance Cancellation in the Three-Phase Inverter”
This article comments on the published article titled “Common-mode noise reduction by parasitics capacitance cancellation in the three-phase inverter” authored by Zhang and Wu (2019). The three-terminal electromagnetic interference (EMI) filter can effectively suppress the EMI noise on the output side in the paper. The numerical analysis and the relationship of converting negative inductance into capacitance at high frequency are discussed in detail. Zhang and Wu (2019) presented a parasitic capacitance cancellation method to reduce the conducted emissions exiting a three-phase inverter. The idea of parasitic capacitance cancellation is not novel, and Wang and Lee (2007, 2010) originally applied it to reduce the common mode noise exiting a boost PFC converter. The parasitic capacitance cancellation of inductors is discussed in papers by Neugebauer and Perreault (2006) and Piboonwattanakit and Khan-Ngern (2008). These papers should be cited in the introduction and the references.
- 21 November 2019
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 99 (2) , 1321-1339
Chaotic and subharmonic oscillations in a DC–DC boost converter with PWM voltage–current hybrid controller and parallel MR load
- 21 November 2019
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 99 (2) , 1321-1339
Chaotic and subharmonic oscillations in a DC–DC boost converter with PWM voltage–current hybrid controller and parallel MR load
- 25 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 61 (1) , 295-300
Common-Mode Noise Reduction by Parasitic Capacitance Cancellation in the Three-Phase Inverter
Electromagnetic interference (EMI) has drawn great attention in recent years. In this particular case, it is generated by the three-phase inverters in power electronics applications due to the power devices turning on and off at high frequency. In this paper, in order to alleviate such EMI noise, a high-frequency common-mode (CM) equivalent model is developed, which leverages the effect of parasitic parameters. Meanwhile, in order to eliminate the effect of the parasitic capacitance between the phase node and ground, which is the cause of main CM noise propagation, a coupled inductor connected with a capacitor circuit, which is equivalent to a negative capacitance is proposed. The parameter calculation for the passive negative capacitance circuit is given in detail. The experimental results demonstrated the effectiveness of the circuitry structure and its ability to reduce CM noise.
- 25 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 61 (1) , 295-300
Common-Mode Noise Reduction by Parasitic Capacitance Cancellation in the Three-Phase Inverter
Electromagnetic interference (EMI) has drawn great attention in recent years. In this particular case, it is generated by the three-phase inverters in power electronics applications due to the power devices turning on and off at high frequency. In this paper, in order to alleviate such EMI noise, a high-frequency common-mode (CM) equivalent model is developed, which leverages the effect of parasitic parameters. Meanwhile, in order to eliminate the effect of the parasitic capacitance between the phase node and ground, which is the cause of main CM noise propagation, a coupled inductor connected with a capacitor circuit, which is equivalent to a negative capacitance is proposed. The parameter calculation for the passive negative capacitance circuit is given in detail. The experimental results demonstrated the effectiveness of the circuitry structure and its ability to reduce CM noise.
- 1 July 2017
- Published by Springer Nature in Optoelectronics Letters
- Vol. 13 (4) , 314-317
A hand tracking algorithm with particle filter and improved GVF snake model
- 1 July 2017
- Published by Springer Nature in Optoelectronics Letters
- Vol. 13 (4) , 314-317
A hand tracking algorithm with particle filter and improved GVF snake model
- Open Access
- 4 February 2016
- Published by Springer Nature in BioMedical Engineering OnLine
- Vol. 15 (1) , 1-20
Automatic screening of cervical cells using block image processing
Cervical cancer is the second leading cause of female-specific cancer-related deaths after breast cancer, especially in developing countries. However, the incidence of the disease may be significantly decreased if the patient is diagnosed in the pre-cancerous lesion stage or earlier. In recent years, computer-based algorithms are widely used in cervical cancer screening. Most of the proposed algorithms follow the procedure of segmentation, feature extraction, and then classification. Nevertheless, few of the existing segmentation methods are as flexible and robust as the human visual system, and the complexity of the algorithms makes it difficult for clinical application. In this study, a computer-assisted analytical approach is proposed to identify the existence of suspicious cells in a whole slide cervical cell image (WSCCI). The main difference between our method and the conventional algorithm is that the image is divided into blocks with certain size instead of segmented cells, which can greatly reduce the computational complexity. Via data analysis, some texture and color histogram features show significant differences between blocks with and without suspicious cells. Therefore these features can be used as the input of the support vector machine classifier. 1100 non-background blocks (110 suspicious blocks) are trained to build a model, while 1040 blocks (491 non-background blocks) from 12 other WSCCIs are tested to verify the feasibility of the algorithm. The experimental results show that the accuracy of our method is about 98.98 %. More importantly, the sensitivity, which is more fatal in cancer screening, is 95.0 % according to the images tested in the study, while the specificity is 99.33 %. The analysis of the algorithm is based on block images, which is different from conventional methods. Although some analysis work should be done in advance, the later processing speed will be greatly enhanced with the establishment of the model. Furthermore, since the algorithm is based on the actual WSCCI, the method will be of directive significance for clinical screening.
- 4 February 2016
- Published by Springer Nature in BioMedical Engineering OnLine
- Vol. 15 (1) , 1-20
Open AccessAutomatic screening of cervical cells using block image processing
Cervical cancer is the second leading cause of female-specific cancer-related deaths after breast cancer, especially in developing countries. However, the incidence of the disease may be significantly decreased if the patient is diagnosed in the pre-cancerous lesion stage or earlier. In recent years, computer-based algorithms are widely used in cervical cancer screening. Most of the proposed algorithms follow the procedure of segmentation, feature extraction, and then classification. Nevertheless, few of the existing segmentation methods are as flexible and robust as the human visual system, and the complexity of the algorithms makes it difficult for clinical application. In this study, a computer-assisted analytical approach is proposed to identify the existence of suspicious cells in a whole slide cervical cell image (WSCCI). The main difference between our method and the conventional algorithm is that the image is divided into blocks with certain size instead of segmented cells, which can greatly reduce the computational complexity. Via data analysis, some texture and color histogram features show significant differences between blocks with and without suspicious cells. Therefore these features can be used as the input of the support vector machine classifier. 1100 non-background blocks (110 suspicious blocks) are trained to build a model, while 1040 blocks (491 non-background blocks) from 12 other WSCCIs are tested to verify the feasibility of the algorithm. The experimental results show that the accuracy of our method is about 98.98 %. More importantly, the sensitivity, which is more fatal in cancer screening, is 95.0 % according to the images tested in the study, while the specificity is 99.33 %. The analysis of the algorithm is based on block images, which is different from conventional methods. Although some analysis work should be done in advance, the later processing speed will be greatly enhanced with the establishment of the model. Furthermore, since the algorithm is based on the actual WSCCI, the method will be of directive significance for clinical screening.
- 23 October 2015
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 83 (4) , 1987-2001
Birth of one-to-four-wing chaotic attractors in a class of simplest three-dimensional continuous memristive systems
- 23 October 2015
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 83 (4) , 1987-2001
Birth of one-to-four-wing chaotic attractors in a class of simplest three-dimensional continuous memristive systems
- 12 September 2015
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 83 (1-2) , 1069-1078
A general method for exploring three-dimensional chaotic attractors with complicated topological structure based on the two-dimensional local vector field around equilibriums
- 12 September 2015
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 83 (1-2) , 1069-1078
A general method for exploring three-dimensional chaotic attractors with complicated topological structure based on the two-dimensional local vector field around equilibriums
- 8 August 2014
- Published by Taylor & Francis in Applied Artificial Intelligence
- Vol. 28 (7) , 647-674
Species-Based Chaotic Hybrid Optimizing Algorithm and its Application in Image Detection
An evolutionary image-detection method based on a novel chaotic hybrid optimizing algorithm (CHOA) is proposed. The method combines the strengths of particle swarm optimization (PSO), genetic algorithms (GAs), and chaotic dynamics (CD), and involves the standard velocity and position update rules of PSOs with the ideas of selection, crossover, and mutation from GA. In addition, the notion of species is introduced into the proposed CHOA to enhance its performance in solving multimodal problems. The effectiveness of the species-based chaotic hybrid optimizing algorithm (SCHOA) is proven through simulations and benchmarking, and finally, it is successfully applied to solve a multitemplate matching (MTM) problem in the printed circuit board (PCB) industry, as well as circle-detection problems. To make it more powerful in solving circle-detection problems in complicated circumstances, the notion of “tolerant radius” is proposed and incorporated into the SCHOA method. Simulation tests were undertaken on several hand-drawn sketches and natural photos, and the effectiveness of the proposed method was clearly shown through the test results.
- 8 August 2014
- Published by Taylor & Francis in Applied Artificial Intelligence
- Vol. 28 (7) , 647-674
Species-Based Chaotic Hybrid Optimizing Algorithm and its Application in Image Detection
An evolutionary image-detection method based on a novel chaotic hybrid optimizing algorithm (CHOA) is proposed. The method combines the strengths of particle swarm optimization (PSO), genetic algorithms (GAs), and chaotic dynamics (CD), and involves the standard velocity and position update rules of PSOs with the ideas of selection, crossover, and mutation from GA. In addition, the notion of species is introduced into the proposed CHOA to enhance its performance in solving multimodal problems. The effectiveness of the species-based chaotic hybrid optimizing algorithm (SCHOA) is proven through simulations and benchmarking, and finally, it is successfully applied to solve a multitemplate matching (MTM) problem in the printed circuit board (PCB) industry, as well as circle-detection problems. To make it more powerful in solving circle-detection problems in complicated circumstances, the notion of “tolerant radius” is proposed and incorporated into the SCHOA method. Simulation tests were undertaken on several hand-drawn sketches and natural photos, and the effectiveness of the proposed method was clearly shown through the test results.
- 8 June 2014
- Published by Springer Nature in Transactions of Tianjin University
- Vol. 20 (3) , 215-222
Life extending control of helicopter based on dynamic inversion
- 8 June 2014
- Published by Springer Nature in Transactions of Tianjin University
- Vol. 20 (3) , 215-222
Life extending control of helicopter based on dynamic inversion