Gianluca Timò
Research Subjects
Research Interests
Gianluca Timò has a total of 207 co-authors. Here are the top co-authors by number of shared publications:
C. Flores
CESI S.p.A. Via Rubattino No. 54 , 20134 Milano, Italy
8 shared publicationsA. Minuto
RSE, Ricerca sul Sistema Elettrico Via Nino Bixio, 34Piacenza-Italy
7 shared publications- Nicola Armani
RSE, Strada Torre della Razza, le Mose, 29100 Piacenza, Italy
7 shared publications R. Campesato
CESI S.p.A., Via Rubattino, 54, Milano Italy
7 shared publications- Elisabetta Achilli
RSE (Ricerca Sul Sistema Energetico), Via Callegari 21, 29122 Piacenza, Italy
6 shared publications Alessandro Minuto
Ricerca sul Sistema Energetico – RSE Spa
5 shared publications
Latest Publications
- Open Access
- 11 June 2026
- Published by EDP Sciences in Journal of the European Optical Society-Rapid Publications
- Vol. 22 (1) , 52
In-situ monitoring of a flashed solar simulator spectral characteristics for multijunction solar cells performance assessment
In the quest for decarbonization, industry and academia are increasing their efforts in research on innovative photovoltaic devices, and proper indoor characterization of devices in an essential element of this research, to correlate manufacturing parameters with electrical properties. For this purpose, it is essential to properly characterize artificial illumination from a solar simulator, as it might directly impact the measured quantities. To fill a literature gap, this work implements triggered high-speed spectrometers for a fast and in-situ characterization of a flashed solar simulator. A commercially available high-speed spectrometer, with a custom-made triggering circuit, was used to evaluate the impact of supply voltage on the spectral components of the solar simulator flash during its temporal evolution. This allowed to identify some spectral lines that decreased far more slowly and never turned off during the measurement window. Supply voltage, surprisingly, introduced large effects when it’s varied to adjust irradiance. Spectral Mismatch Ratio was also determined as function of time and wavelength to provide an useful parameter when using artificial radiation. These artifacts impact the measured current–voltage curves, as evaluated on three devices. This fast spectral characterization enriched the indoor characterization procedure, allowing to identify how the extinction spectra vary with time, and to identify unexpected features introduced by changes in supply voltage.
- 11 June 2026
- Published by EDP Sciences in Journal of the European Optical Society-Rapid Publications
- Vol. 22 (1) , 52
Open AccessIn-situ monitoring of a flashed solar simulator spectral characteristics for multijunction solar cells performance assessment
In the quest for decarbonization, industry and academia are increasing their efforts in research on innovative photovoltaic devices, and proper indoor characterization of devices in an essential element of this research, to correlate manufacturing parameters with electrical properties. For this purpose, it is essential to properly characterize artificial illumination from a solar simulator, as it might directly impact the measured quantities. To fill a literature gap, this work implements triggered high-speed spectrometers for a fast and in-situ characterization of a flashed solar simulator. A commercially available high-speed spectrometer, with a custom-made triggering circuit, was used to evaluate the impact of supply voltage on the spectral components of the solar simulator flash during its temporal evolution. This allowed to identify some spectral lines that decreased far more slowly and never turned off during the measurement window. Supply voltage, surprisingly, introduced large effects when it’s varied to adjust irradiance. Spectral Mismatch Ratio was also determined as function of time and wavelength to provide an useful parameter when using artificial radiation. These artifacts impact the measured current–voltage curves, as evaluated on three devices. This fast spectral characterization enriched the indoor characterization procedure, allowing to identify how the extinction spectra vary with time, and to identify unexpected features introduced by changes in supply voltage.
- Open Access
Step-Graded III–V Metamorphic Buffers on Ge for High-Efficiency Photovoltaics: Investigation of Strain Relaxation and Morphology Evolution
This work is motivated by the need to enhance efficiency and radiation resistance and reduce weight in high-performance photovoltaic devices, with applications spanning both terrestrial and space environments. Metamorphic buffers are key enablers for reducing defect formation in lattice-mismatched structures, which are among the most widespread technologies for high-efficiency photovoltaic energy conversion. Although many systems have been created, absolute certainty about the effective relaxation mechanism remains unattained. In this work, MOVPE-grown step-graded buffers with variable In content were obtained on Ge substrates and investigated to identify the critical thresholds that govern strain relaxation and defect formation. The results show that the buffers are fully strained when the In top-layer content is 6.0%. In addition, the relaxation phenomenon is paralleled by the formation of a tilt angle between the layers and the substrate. We also found evidence that the appearance of relaxation is not limited to the upper layer but is presented by the structure as a whole. The effects of Te doping inside the InGaAs layers were also investigated: Te does not influence the structure of the crystal, but it introduces a Burstein–Moss blue shift in the photoluminescence energy of about 20 meV. Eventually, to reduce defect formation with the goal of achieving high-efficiency photovoltaic devices, a thick layer with a lower In content was grown onto the overshoot material (In0.12Ga0.88As). The results obtained confirm the high quality of the buffers and unveil the critical points, which are responsible for the most important changes in the buffer architecture and should be considered in future material engineering. The results provide valuable insights for the design of high-performance, sustainable photovoltaic devices and contribute to the advancement of III–V semiconductor integration on Ge substrates.
Open AccessStep-Graded III–V Metamorphic Buffers on Ge for High-Efficiency Photovoltaics: Investigation of Strain Relaxation and Morphology Evolution
This work is motivated by the need to enhance efficiency and radiation resistance and reduce weight in high-performance photovoltaic devices, with applications spanning both terrestrial and space environments. Metamorphic buffers are key enablers for reducing defect formation in lattice-mismatched structures, which are among the most widespread technologies for high-efficiency photovoltaic energy conversion. Although many systems have been created, absolute certainty about the effective relaxation mechanism remains unattained. In this work, MOVPE-grown step-graded buffers with variable In content were obtained on Ge substrates and investigated to identify the critical thresholds that govern strain relaxation and defect formation. The results show that the buffers are fully strained when the In top-layer content is 6.0%. In addition, the relaxation phenomenon is paralleled by the formation of a tilt angle between the layers and the substrate. We also found evidence that the appearance of relaxation is not limited to the upper layer but is presented by the structure as a whole. The effects of Te doping inside the InGaAs layers were also investigated: Te does not influence the structure of the crystal, but it introduces a Burstein–Moss blue shift in the photoluminescence energy of about 20 meV. Eventually, to reduce defect formation with the goal of achieving high-efficiency photovoltaic devices, a thick layer with a lower In content was grown onto the overshoot material (In0.12Ga0.88As). The results obtained confirm the high quality of the buffers and unveil the critical points, which are responsible for the most important changes in the buffer architecture and should be considered in future material engineering. The results provide valuable insights for the design of high-performance, sustainable photovoltaic devices and contribute to the advancement of III–V semiconductor integration on Ge substrates.
- Open Access
All MOVPE Grown Quadruple Junction InGaP/InGaAs/Ge/Ge Solar Cell
Most commercially available InGaP/InGaAs/Ge triple-junction solar cells suffer from current mismatch due to the excess current generated by the Ge sub-cell. Combining epitaxial germanium with III–V materials would enable the realization of lattice-matched four- or five-junction solar cells, where the near-infrared spectrum could be split between two Ge sub-cells instead of one, thereby eliminating current mismatch in these devices and achieving higher conversion efficiency. In this work, we present the first demonstration of a quadruple-junction (4J) InGaP/InGaAs/Ge/Ge device, with all layers sequentially deposited in the same MOVPE growth chamber. The 4J device also features a novel architecture that exploits the “transistor effect” between the two Ge junctions to eliminate the current mismatch in the upper 3J InGaP/GaAs/Ge part. We describe the growth and the cell structure realization strategy developed to overcome—and, where beneficial, to exploit—the cross-contamination between III–V and group IV elements, thus avoiding the need for two separate deposition systems. The structural and electrical characterizations performed to ascertain the 4J device quality are presented. This result represents a key step toward the realization of highly efficient, all-MOVPE-grown, lattice-matched MJ solar structures that combine III–V and group IV alloys.
Open AccessAll MOVPE Grown Quadruple Junction InGaP/InGaAs/Ge/Ge Solar Cell
Most commercially available InGaP/InGaAs/Ge triple-junction solar cells suffer from current mismatch due to the excess current generated by the Ge sub-cell. Combining epitaxial germanium with III–V materials would enable the realization of lattice-matched four- or five-junction solar cells, where the near-infrared spectrum could be split between two Ge sub-cells instead of one, thereby eliminating current mismatch in these devices and achieving higher conversion efficiency. In this work, we present the first demonstration of a quadruple-junction (4J) InGaP/InGaAs/Ge/Ge device, with all layers sequentially deposited in the same MOVPE growth chamber. The 4J device also features a novel architecture that exploits the “transistor effect” between the two Ge junctions to eliminate the current mismatch in the upper 3J InGaP/GaAs/Ge part. We describe the growth and the cell structure realization strategy developed to overcome—and, where beneficial, to exploit—the cross-contamination between III–V and group IV elements, thus avoiding the need for two separate deposition systems. The structural and electrical characterizations performed to ascertain the 4J device quality are presented. This result represents a key step toward the realization of highly efficient, all-MOVPE-grown, lattice-matched MJ solar structures that combine III–V and group IV alloys.
- 6 February 2023
- Published by Elsevier in Journal of Crystal Growth
- Vol. 607
MOCVD growth and characterization of high efficiency (Al)InGaP solar cells for luminescent concentrators
- 6 February 2023
- Published by Elsevier in Journal of Crystal Growth
- Vol. 607
MOCVD growth and characterization of high efficiency (Al)InGaP solar cells for luminescent concentrators
- Open Access
Capabilities of Grazing Incidence X-ray Diffraction in the Investigation of Amorphous Mixed Oxides with Variable Composition
X-ray Diffraction has been fully exploited as a probe to investigate crystalline materials. However, very little research has been carried out to unveil its potentialities towards amorphous materials. In this work, we demonstrated the capabilities of Grazing Incidence X-ray Diffraction (GIXRD) as a simple and fast tool to obtain quantitative information about the composition of amorphous mixed oxides. In particular, we evidenced that low angle scattering features, associated with local structure parameters, show a significant trend as a function of the oxide composition. This evolution can be quantified by interpolating GIXRD data with a linear combination of basic analytical functions, making it possible to build up GIXRD peak-sample composition calibration curves. As a case study, the present method was demonstrated on Ta2O5–SiO2 amorphous films deposited by RF-magnetron sputtering. GIXRD results were validated by independent measurement of the oxide composition using Rutherford Backscattering Spectrometry (RBS). These materials are attracting interest in different industrial sectors and, in particular, in photovoltaics as anti-reflection coatings. Eventually, the optical properties measured by spectroscopic ellipsometry were correlated to the chemical composition of the film. The obtained results highlighted not only a correlation between diffraction features and the composition of amorphous films but also revealed a simple and fast strategy to characterize amorphous thin oxides of industrial interest.
Open AccessCapabilities of Grazing Incidence X-ray Diffraction in the Investigation of Amorphous Mixed Oxides with Variable Composition
X-ray Diffraction has been fully exploited as a probe to investigate crystalline materials. However, very little research has been carried out to unveil its potentialities towards amorphous materials. In this work, we demonstrated the capabilities of Grazing Incidence X-ray Diffraction (GIXRD) as a simple and fast tool to obtain quantitative information about the composition of amorphous mixed oxides. In particular, we evidenced that low angle scattering features, associated with local structure parameters, show a significant trend as a function of the oxide composition. This evolution can be quantified by interpolating GIXRD data with a linear combination of basic analytical functions, making it possible to build up GIXRD peak-sample composition calibration curves. As a case study, the present method was demonstrated on Ta2O5–SiO2 amorphous films deposited by RF-magnetron sputtering. GIXRD results were validated by independent measurement of the oxide composition using Rutherford Backscattering Spectrometry (RBS). These materials are attracting interest in different industrial sectors and, in particular, in photovoltaics as anti-reflection coatings. Eventually, the optical properties measured by spectroscopic ellipsometry were correlated to the chemical composition of the film. The obtained results highlighted not only a correlation between diffraction features and the composition of amorphous films but also revealed a simple and fast strategy to characterize amorphous thin oxides of industrial interest.
- Open Access
- 1 January 2022
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2550 (1) , 060006
The proposal of a new standard for the measurement procedures of CPV/PV hybrid modules
Hybrid CPV/PV modules include CPV solar cells designed to collect concentrated light and PV solar cells designed to collect diffuse or global light. The power rating, as well as the module energy rating for such PV modules are complicated by the fact that, in some cases, the power is a strong and discontinuous function of angle of incidence (AOI). For such a reason, the IEC 61853 and IEC 62670 series do not sufficiently cover the specific requirements and procedures for evaluating the Hybrid CPV/PV performances. The standard conditions for assessing the power produced by the hybrid CPV/PV modules have also to be differentiated from those used to characterize flat PV or CPV modules. With this contribution, the motivations behind the new work item proposal on “Hybrid CPV/PV modules: General characteristics and measurement procedures” are therefore presented.
- 1 January 2022
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2550 (1) , 060006
Open AccessThe proposal of a new standard for the measurement procedures of CPV/PV hybrid modules
Hybrid CPV/PV modules include CPV solar cells designed to collect concentrated light and PV solar cells designed to collect diffuse or global light. The power rating, as well as the module energy rating for such PV modules are complicated by the fact that, in some cases, the power is a strong and discontinuous function of angle of incidence (AOI). For such a reason, the IEC 61853 and IEC 62670 series do not sufficiently cover the specific requirements and procedures for evaluating the Hybrid CPV/PV performances. The standard conditions for assessing the power produced by the hybrid CPV/PV modules have also to be differentiated from those used to characterize flat PV or CPV modules. With this contribution, the motivations behind the new work item proposal on “Hybrid CPV/PV modules: General characteristics and measurement procedures” are therefore presented.
- Open Access
- 1 January 2022
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2550 (1) , 040007
Design of a novel compact prismatic concentrator with improved angular acceptance
In order to increase the conversion efficiency of photovoltaic concentrators, as well as to reduce the solar tracking cost, a new prismatic concentrator is proposed. The concentrator optics operates both in transmission and in reflection, it has a total vertical dimension of 55 mm and a square output aperture, equivalent to the PV cell size, of 0.75 x 0.75 mm. It is essentially composed by a convex surface attached to a prismatic truncated pyramid. The design procedures followed to increase the acceptance angle of the concentrator are described. The output of simulations carried out by Zemax software allows getting a concentrating factor of 750x, a maximum optical efficiency of 95% and an angular acceptance of ±2.1°.
- 1 January 2022
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2550 (1) , 040007
Open AccessDesign of a novel compact prismatic concentrator with improved angular acceptance
In order to increase the conversion efficiency of photovoltaic concentrators, as well as to reduce the solar tracking cost, a new prismatic concentrator is proposed. The concentrator optics operates both in transmission and in reflection, it has a total vertical dimension of 55 mm and a square output aperture, equivalent to the PV cell size, of 0.75 x 0.75 mm. It is essentially composed by a convex surface attached to a prismatic truncated pyramid. The design procedures followed to increase the acceptance angle of the concentrator are described. The output of simulations carried out by Zemax software allows getting a concentrating factor of 750x, a maximum optical efficiency of 95% and an angular acceptance of ±2.1°.
- Open Access
- 1 June 2021
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 224
Results on MOVPE SiGeSn deposition for the monolithic integration of III-V and IV elements in multi-junction solar cells
- 1 June 2021
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 224
Open AccessResults on MOVPE SiGeSn deposition for the monolithic integration of III-V and IV elements in multi-junction solar cells
- Open Access
Study of the Cross-Influence between III-V and IV Elements Deposited in the Same MOVPE Growth Chamber
We have deposited Ge, SiGe, SiGeSn, AlAs, GaAs, InGaP and InGaAs based structures in the same metalorganic vapor phase epitaxy (MOVPE) growth chamber, in order to study the effect of the cross influence between groups IV and III-V elements on the growth rate, background doping and morphology. It is shown that by adopting an innovative design of the MOVPE growth chamber and proper growth condition, the IV elements growth rate penalization due to As “carry over” can be eliminated and the background doping level in both IV and III-V semiconductors can be drastically reduced. In the temperature range 748–888 K, Ge and SiGe morphologies do not degrade when the semiconductors are grown in a III-V-contaminated MOVPE growth chamber. Critical morphology aspects have been identified for SiGeSn and III-Vs, when the MOVPE deposition takes place, respectively, in a As or Sn-contaminated MOVPE growth chamber. III-Vs morphologies are influenced by substrate type and orientation. The results are promising in view of the monolithic integration of group-IV with III-V compounds in multi-junction solar cells.
Open AccessStudy of the Cross-Influence between III-V and IV Elements Deposited in the Same MOVPE Growth Chamber
We have deposited Ge, SiGe, SiGeSn, AlAs, GaAs, InGaP and InGaAs based structures in the same metalorganic vapor phase epitaxy (MOVPE) growth chamber, in order to study the effect of the cross influence between groups IV and III-V elements on the growth rate, background doping and morphology. It is shown that by adopting an innovative design of the MOVPE growth chamber and proper growth condition, the IV elements growth rate penalization due to As “carry over” can be eliminated and the background doping level in both IV and III-V semiconductors can be drastically reduced. In the temperature range 748–888 K, Ge and SiGe morphologies do not degrade when the semiconductors are grown in a III-V-contaminated MOVPE growth chamber. Critical morphology aspects have been identified for SiGeSn and III-Vs, when the MOVPE deposition takes place, respectively, in a As or Sn-contaminated MOVPE growth chamber. III-Vs morphologies are influenced by substrate type and orientation. The results are promising in view of the monolithic integration of group-IV with III-V compounds in multi-junction solar cells.
- Open Access
- 7 January 2020
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 28 (4) , 279-294
A new theoretical approach for the performance simulation of multijunction solar cells
- 7 January 2020
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 28 (4) , 279-294
Open AccessA new theoretical approach for the performance simulation of multijunction solar cells