Biao Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Biao Liu has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Shaona Wang
CAS Key Laboratory of Green Process and Engineering, National Engineering Research Center of Green Recycling for Strategic Metal Resources, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, China
6 shared publicationsHao Du
CAS Key Laboratory of Green Process and Engineering, National Engineering Research Center of Green Recycling for Strategic Metal Resources, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, China
5 shared publicationsYi Zhang
CAS Key Laboratory of Green Process and Engineering, National Engineering Research Center of Green Recycling for Strategic Metal Resources, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, China
4 shared publicationsBaoyin Heng
Chengde Xintong Shoucheng Technology Co., Ltd, Chengde, China
2 shared publicationsFeng Gao
School of Metallurgy, Northeastern University, Shenyang, China
2 shared publicationsHanguan Zhang
Chengde Xintong Shoucheng Technology Co., Ltd, Chengde, China
2 shared publications
Latest Publications
- Open Access
- 25 May 2023
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 9 (2) , 794
Correction to: A Method to Extract Vanadium from HIsmelt Reduction Slag: In Situ Sodium Salt Oxidation and Alkali Leaching
- 25 May 2023
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 9 (2) , 794
Open AccessCorrection to: A Method to Extract Vanadium from HIsmelt Reduction Slag: In Situ Sodium Salt Oxidation and Alkali Leaching
- 28 April 2023
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 9 (2) , 779-793
A Method to Extract Vanadium from HIsmelt Reduction Slag: In Situ Sodium Salt Oxidation and Alkali Leaching
- 28 April 2023
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 9 (2) , 779-793
A Method to Extract Vanadium from HIsmelt Reduction Slag: In Situ Sodium Salt Oxidation and Alkali Leaching
- 3 May 2022
- Published by Taylor & Francis in Mineral Processing and Extractive Metallurgy Review
- Vol. 44 (5) , 352-364
A Comparative Study of Extracting Vanadium from Vanadium Titano-Magnetite Ores: Calcium Salt Roasting Vs Sodium Salt Roasting
In this study, a new vanadium extraction process from vanadium titano-magnetite(VTM) featuring calcification roasting and (NH4)2C2O4 solution leaching has been proposed. Compared with the traditional sodium roasting, the calcification roasting can avoid the production of waste gas and the sodium free tailings can be used for iron recovering by steel-making. However, the leaching rate of (NH4)2C2O4 was lower than that in sodium salt roasting-waterleaching. The reaction kinetics and mechanism of these two process were studied and compared in detail. It was found thatCaV2O6was formed during calcification and the porous structure of calcine facilitated the mass transfer. In the subsequent (NH4)2C2O4 leaching, theCaC2O4was formed and it would precipitate at the calcine particle surface and pores, which hindered the vanadium leaching. The leaching kinetics study showed that the diffusion through the solid product layer was the rate-determiningstep. Mechanical activation method was proposed to improve the leaching reaction kinetics in this work. It has been evident to be an effective method to intensify the leaching process. Under the optimal roasting and leaching conditions, the vanadium leaching rate could reach 81%, which was similar to that of the sodium salt roasting process. This is a promising alternative process for vanadium extraction from high grade VTM.
- 3 May 2022
- Published by Taylor & Francis in Mineral Processing and Extractive Metallurgy Review
- Vol. 44 (5) , 352-364
A Comparative Study of Extracting Vanadium from Vanadium Titano-Magnetite Ores: Calcium Salt Roasting Vs Sodium Salt Roasting
In this study, a new vanadium extraction process from vanadium titano-magnetite(VTM) featuring calcification roasting and (NH4)2C2O4 solution leaching has been proposed. Compared with the traditional sodium roasting, the calcification roasting can avoid the production of waste gas and the sodium free tailings can be used for iron recovering by steel-making. However, the leaching rate of (NH4)2C2O4 was lower than that in sodium salt roasting-waterleaching. The reaction kinetics and mechanism of these two process were studied and compared in detail. It was found thatCaV2O6was formed during calcification and the porous structure of calcine facilitated the mass transfer. In the subsequent (NH4)2C2O4 leaching, theCaC2O4was formed and it would precipitate at the calcine particle surface and pores, which hindered the vanadium leaching. The leaching kinetics study showed that the diffusion through the solid product layer was the rate-determiningstep. Mechanical activation method was proposed to improve the leaching reaction kinetics in this work. It has been evident to be an effective method to intensify the leaching process. Under the optimal roasting and leaching conditions, the vanadium leaching rate could reach 81%, which was similar to that of the sodium salt roasting process. This is a promising alternative process for vanadium extraction from high grade VTM.
- 13 May 2020
- Published by Taylor & Francis in Mineral Processing and Extractive Metallurgy Review
- Vol. 42 (4) , 257-267
Direct Leaching of Vanadium from Vanadium-bearing Steel Slag Using NaOH Solutions: A Case Study
Vanadium-bearing steel slag is a typical solid waste in the steel industry and a valuable secondary resource for vanadium production. In this paper, a direct alkaline leaching process was proposed to extract valuable vanadium and achieve comprehensive utilization of the residue by incorporating the new process into the conventional Bayer alumina production process. The leaching mechanism showed the feasibility of alkaline leaching. The effects of alkaline concentration, temperature, particle size, liquid-solid ratio (mass ratio), and stirring speed on the process were investigated, and the recovery of vanadium was found to achieve 68.4% under optimal conditions. Both the internal diffusion and the interface reaction were found by kinetic analysis to be the controlling steps of the leaching reaction, and the apparent reaction activation energy value of 26.67 kJ/mol was calculated. The valence state of the vanadium in the steel slag was analyzed in detail, finding that low-valent (V3+) and high-valent (V4+ and V5+) vanadium were both present in the steel slag. By introducing oxygen into the reaction system, the recovery could be improved to 85.6%, which was 17.2% higher than that of non-oxidative leaching.
- 13 May 2020
- Published by Taylor & Francis in Mineral Processing and Extractive Metallurgy Review
- Vol. 42 (4) , 257-267
Direct Leaching of Vanadium from Vanadium-bearing Steel Slag Using NaOH Solutions: A Case Study
Vanadium-bearing steel slag is a typical solid waste in the steel industry and a valuable secondary resource for vanadium production. In this paper, a direct alkaline leaching process was proposed to extract valuable vanadium and achieve comprehensive utilization of the residue by incorporating the new process into the conventional Bayer alumina production process. The leaching mechanism showed the feasibility of alkaline leaching. The effects of alkaline concentration, temperature, particle size, liquid-solid ratio (mass ratio), and stirring speed on the process were investigated, and the recovery of vanadium was found to achieve 68.4% under optimal conditions. Both the internal diffusion and the interface reaction were found by kinetic analysis to be the controlling steps of the leaching reaction, and the apparent reaction activation energy value of 26.67 kJ/mol was calculated. The valence state of the vanadium in the steel slag was analyzed in detail, finding that low-valent (V3+) and high-valent (V4+ and V5+) vanadium were both present in the steel slag. By introducing oxygen into the reaction system, the recovery could be improved to 85.6%, which was 17.2% higher than that of non-oxidative leaching.
- 2 August 2017
- Published by Springer Nature in JOM
- Vol. 69 (10) , 1970-1975
Extraction of Vanadium from Vanadium Slag Via Non-salt Roasting and Ammonium Oxalate Leaching
- 2 August 2017
- Published by Springer Nature in JOM
- Vol. 69 (10) , 1970-1975
Extraction of Vanadium from Vanadium Slag Via Non-salt Roasting and Ammonium Oxalate Leaching
- 1 October 2016
- Published by Elsevier in Hydrometallurgy
- Vol. 165, 244-250
The electrowinning of vanadium oxide from alkaline solution
- 1 October 2016
- Published by Elsevier in Hydrometallurgy
- Vol. 165, 244-250
The electrowinning of vanadium oxide from alkaline solution