Zheng Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zheng Yang has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
Xiangrong Liu
Xi’an University of Science and Technology
13 shared publicationsXiaodan Jia
Xi’an University of Science and Technology
12 shared publicationsHui Li
Key Laboratory of Synthetic and Natural Functional Molecule of the Ministry of Education, College of Chemistry & Materials Science, Northwest University, Xi’an 710127, P. R. China
6 shared publicationsTiantian Xu
College of Chemistry and Chemical Engineering, Xi’an University of Science and Technology, Xi’an 710054, P. R. China
6 shared publications- Jianli Li
Northwest University
5 shared publications Shaobing Zhang
Xi’an University of Science and Technology
5 shared publications
Latest Publications
- 1 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
Design and Synthesis of Long Persistent Luminescent Carbon Dots and Layered Double Hydroxides Composite Materials for Information Encryption
Long persistent luminescence (LPL) materials based on carbon dots (CDs) have emerged as promising candidates in advanced optoelectronics, but their practical development is severely hindered by aggregation-caused quenching (ACQ) and unstable triplet excitons in the solid state. Combining CDs with layered double hydroxides (LDHs) to construct composite materials for efficient LPL emission is of great significance. This research established high-performance CDs/LDHs composites through a unique strategy of heteroatom codoping and interfacial coordination engineering. Specifically, experimental results showed heteroatom doping and interfacial coordination can optimize the π-conjugation system of CDs and strengthen the interaction between CDs and LDHs, with significantly promoted LPL performance. Hence, YCDs/Mg2Al-LDHs and YCDs/Zn2Al-LDHs exhibited excellent LPL properties, including excitation-independent emission, large Stokes shifts, stable luminescence performance, and long afterglow durations (up to 8 s). Significantly, the composites possessed strong interfacial interactions and high practicability for dual-mode dynamic anti-counterfeiting and information encryption when formulated into fluorescent inks with poly(vinyl alcohol) (PVA). Together, the results of this research show that the strategy of heteroatom doping and interfacial coordination engineering is not only advantageous in conveniently constructing high-performance CDs/LDHs composites with advanced optical and LPL properties but also yields insights for effective monitoring and application of CDs-based LPL materials in related fields.
- 1 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
Design and Synthesis of Long Persistent Luminescent Carbon Dots and Layered Double Hydroxides Composite Materials for Information Encryption
Long persistent luminescence (LPL) materials based on carbon dots (CDs) have emerged as promising candidates in advanced optoelectronics, but their practical development is severely hindered by aggregation-caused quenching (ACQ) and unstable triplet excitons in the solid state. Combining CDs with layered double hydroxides (LDHs) to construct composite materials for efficient LPL emission is of great significance. This research established high-performance CDs/LDHs composites through a unique strategy of heteroatom codoping and interfacial coordination engineering. Specifically, experimental results showed heteroatom doping and interfacial coordination can optimize the π-conjugation system of CDs and strengthen the interaction between CDs and LDHs, with significantly promoted LPL performance. Hence, YCDs/Mg2Al-LDHs and YCDs/Zn2Al-LDHs exhibited excellent LPL properties, including excitation-independent emission, large Stokes shifts, stable luminescence performance, and long afterglow durations (up to 8 s). Significantly, the composites possessed strong interfacial interactions and high practicability for dual-mode dynamic anti-counterfeiting and information encryption when formulated into fluorescent inks with poly(vinyl alcohol) (PVA). Together, the results of this research show that the strategy of heteroatom doping and interfacial coordination engineering is not only advantageous in conveniently constructing high-performance CDs/LDHs composites with advanced optical and LPL properties but also yields insights for effective monitoring and application of CDs-based LPL materials in related fields.
- 25 May 2026
- Published by Springer Nature in Journal of Fluorescence
- Vol. 36 (6) , 3805-3815
Multicolor Carbon Dots with Purple-to-Red Emission for Fluorescent Inks and LEDs Applications
Carbon dots (CDs) present substantial potential in bioimaging, sensing, catalysis, and optoelectronic devices due to their distinctive fluorescent properties, low toxicity, and excellent biocompatibility. Nevertheless, achieving multicolor-tunable fluorescence emission across the entire visible spectrum remains a significant challenge. Recent research has focused on solvothermal synthesis routes to address this, demonstrating the ability to produce a series of multicolor-emitting CDs (p-CDs to r-CDs) by utilizing precursors such as citric acid, benzoic acid, and catechol. This approach enables the creation of multicolor fluorescent inks that exhibit distinct, non-interfering five-color emission under 365 nm ultraviolet (UV) irradiation, indicating promise in anti-counterfeiting and labeling applications. Furthermore, the successful fabrication of red-light-emitting diodes (LEDs) using specific CDs (e.g. r-CDs) demonstrates their viability for advanced lighting and display technologies. These LEDs exhibit an electroluminescence peak at 586 nm and CIE color coordinates of (0.54, 0.43), highlighting their potential for high-performance applications.
- 25 May 2026
- Published by Springer Nature in Journal of Fluorescence
- Vol. 36 (6) , 3805-3815
Multicolor Carbon Dots with Purple-to-Red Emission for Fluorescent Inks and LEDs Applications
Carbon dots (CDs) present substantial potential in bioimaging, sensing, catalysis, and optoelectronic devices due to their distinctive fluorescent properties, low toxicity, and excellent biocompatibility. Nevertheless, achieving multicolor-tunable fluorescence emission across the entire visible spectrum remains a significant challenge. Recent research has focused on solvothermal synthesis routes to address this, demonstrating the ability to produce a series of multicolor-emitting CDs (p-CDs to r-CDs) by utilizing precursors such as citric acid, benzoic acid, and catechol. This approach enables the creation of multicolor fluorescent inks that exhibit distinct, non-interfering five-color emission under 365 nm ultraviolet (UV) irradiation, indicating promise in anti-counterfeiting and labeling applications. Furthermore, the successful fabrication of red-light-emitting diodes (LEDs) using specific CDs (e.g. r-CDs) demonstrates their viability for advanced lighting and display technologies. These LEDs exhibit an electroluminescence peak at 586 nm and CIE color coordinates of (0.54, 0.43), highlighting their potential for high-performance applications.
- 17 April 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (34) , 22357-22366
Ultrasonic levitation construction of palladium doped near-infrared carbon dots as nanoprobes for carbon monoxide sensing and imaging
NIR CDs were constructed through an ultrasonic levitation method, which resulted in redshifts of the emission over 150 nm and enhanced Pd 2+ content with improved sensitivity. The CDs can serve as promising probes for the sensing and imaging of CO.
- 17 April 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (34) , 22357-22366
Ultrasonic levitation construction of palladium doped near-infrared carbon dots as nanoprobes for carbon monoxide sensing and imaging
NIR CDs were constructed through an ultrasonic levitation method, which resulted in redshifts of the emission over 150 nm and enhanced Pd 2+ content with improved sensitivity. The CDs can serve as promising probes for the sensing and imaging of CO.
- 30 March 2026
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 26 (8) , 2970-2980
A Highly Sulfate-Selective Ionic Framework with Interconnected Packed Cavities Based on Tetraphenylmethane-Derived Octa-urea Receptors
- 30 March 2026
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 26 (8) , 2970-2980
A Highly Sulfate-Selective Ionic Framework with Interconnected Packed Cavities Based on Tetraphenylmethane-Derived Octa-urea Receptors
- 21 June 2025
- Published by Springer Nature in Journal of Fluorescence
- Vol. 35 (11) , 11755-11766
Red Emissive Carbon Dots as Fluorescent Probe for Specific Sensing and Imaging of HCIO
Selective detecting and tracking of HClO is crucial for reflecting related oxidative stress process and environmental safety. In this research, we present the red emissive carbon dots (CDs) with advantageous optical performances including high fluorescent stability, strong intensity and advanced quantum yield. The CDs showed excellent selectivity and sensitivity towards HClO with superior anti-interference performance and outstanding detection limit, indicating the CDs based fluorescent nanoprobe is not only highly suitable for detecting HClO in complicated water samples by solution, but also serve as prospective fluorescent filer paper sensor for fast detection. The low cytotoxicity and favorable biocompatibility are extremely demanded for sensing and imaging exogenous and endogenous HClO in living cells, and encourages the CDs as powerful imaging tool to unveil the mystery of HClO participant oxidative stress process, which would be beneficial for early diagnosis and therapeutics of related diseases. Clinical Trial Number Not applicable. Graphical Abstract
- 21 June 2025
- Published by Springer Nature in Journal of Fluorescence
- Vol. 35 (11) , 11755-11766
Red Emissive Carbon Dots as Fluorescent Probe for Specific Sensing and Imaging of HCIO
Selective detecting and tracking of HClO is crucial for reflecting related oxidative stress process and environmental safety. In this research, we present the red emissive carbon dots (CDs) with advantageous optical performances including high fluorescent stability, strong intensity and advanced quantum yield. The CDs showed excellent selectivity and sensitivity towards HClO with superior anti-interference performance and outstanding detection limit, indicating the CDs based fluorescent nanoprobe is not only highly suitable for detecting HClO in complicated water samples by solution, but also serve as prospective fluorescent filer paper sensor for fast detection. The low cytotoxicity and favorable biocompatibility are extremely demanded for sensing and imaging exogenous and endogenous HClO in living cells, and encourages the CDs as powerful imaging tool to unveil the mystery of HClO participant oxidative stress process, which would be beneficial for early diagnosis and therapeutics of related diseases. Clinical Trial Number Not applicable. Graphical Abstract
- 12 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 13 (23) , 6873-6883
Rational design of near-infrared carbon dots as polarity-sensitive fluorescent probes for imaging of lipid droplets
Polarity plays important roles in establishing and reflecting numerous complex physiological functions and pathological effects associated with energy metabolism and cell signaling. Monitoring the variations in polarity, particularly the polarity of lipid droplets (LDs), is of great significance in biomedical research and clinical diagnosis. Herein, a novel near-infrared (NIR) carbon dots (CDs)-based fluorescent nanoprobe is presented to serve the stringent requirements of polarity targeting and imaging with high sensitivity, superior photostability, excellent permeability and biocompatibility. The absorption and emission wavelength shifts were in response to an increased ambient polarity (Δf), in which the emission reached to the NIR region near 800 nm with the maximum emission wavelength located around 700 nm. This nanoprobe can specifically colocalize with LDs with a high correlation coefficient of 0.96 and effectively image the polarity changes in LDs and living cells. This work presents effective strategies and foundations for the construction of NIR CDs, helps in the design of polarity selective probes, and has implications for accelerating the development of polarity-related processes for disease diagnosis.
- 12 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 13 (23) , 6873-6883
Rational design of near-infrared carbon dots as polarity-sensitive fluorescent probes for imaging of lipid droplets
Polarity plays important roles in establishing and reflecting numerous complex physiological functions and pathological effects associated with energy metabolism and cell signaling. Monitoring the variations in polarity, particularly the polarity of lipid droplets (LDs), is of great significance in biomedical research and clinical diagnosis. Herein, a novel near-infrared (NIR) carbon dots (CDs)-based fluorescent nanoprobe is presented to serve the stringent requirements of polarity targeting and imaging with high sensitivity, superior photostability, excellent permeability and biocompatibility. The absorption and emission wavelength shifts were in response to an increased ambient polarity (Δf), in which the emission reached to the NIR region near 800 nm with the maximum emission wavelength located around 700 nm. This nanoprobe can specifically colocalize with LDs with a high correlation coefficient of 0.96 and effectively image the polarity changes in LDs and living cells. This work presents effective strategies and foundations for the construction of NIR CDs, helps in the design of polarity selective probes, and has implications for accelerating the development of polarity-related processes for disease diagnosis.
- 22 August 2024
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 22 (39) , 8024-8031
A zero-background fluorescent probe for sensing and imaging of glutathione via the “covalent-assembly” approach
This work presents a promising fluorescent probe with excellent sensitivity and selectivity, negligible cytotoxicity and zero-background interference as an effective tool for real-time sensing and visualizing GSH in both solutions and living cells.
- 22 August 2024
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 22 (39) , 8024-8031
A zero-background fluorescent probe for sensing and imaging of glutathione via the “covalent-assembly” approach
This work presents a promising fluorescent probe with excellent sensitivity and selectivity, negligible cytotoxicity and zero-background interference as an effective tool for real-time sensing and visualizing GSH in both solutions and living cells.
- 4 June 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (13) , 7944-7950
Light-assisted green and efficient construction of thiadiazole/selenadiazole derivatives
A green and efficient one-pot photocatalytic synthetic methodology was presented for fabrication of thiadiazole/selenadiazole derivatives with good group tolerance, safe conditions, and high yields.
- 4 June 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (13) , 7944-7950
Light-assisted green and efficient construction of thiadiazole/selenadiazole derivatives
A green and efficient one-pot photocatalytic synthetic methodology was presented for fabrication of thiadiazole/selenadiazole derivatives with good group tolerance, safe conditions, and high yields.
- Top Cited Papers
- 7 September 2023
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 123 (18) , 11047-11136
Zero-Dimensional Carbon Nanomaterials for Fluorescent Sensing and Imaging
Advances in nanotechnology and nanomaterials have attracted considerable interest and play key roles in scientific innovations in diverse fields. In particular, increased attention has been focused on carbon-based nanomaterials exhibiting diverse extended structures and unique properties. Among these materials, zero-dimensional structures, including fullerenes, carbon nano-onions, carbon nanodiamonds, and carbon dots, possess excellent bioaffinities and superior fluorescence properties that make these structures suitable for application to environmental and biological sensing, imaging, and therapeutics. This review provides a systematic overview of the classification and structural properties, design principles and preparation methods, and optical properties and sensing applications of zero-dimensional carbon nanomaterials. Recent interesting breakthroughs in the sensitive and selective sensing and imaging of heavy metal pollutants, hazardous substances, and bioactive molecules as well as applications in information encryption, super-resolution and photoacoustic imaging, and phototherapy and nanomedicine delivery are the main focus of this review. Finally, future challenges and prospects of these materials are highlighted and envisaged. This review presents a comprehensive basis and directions for designing, developing, and applying fascinating fluorescent sensors fabricated based on zero-dimensional carbon nanomaterials for specific requirements in numerous research fields.
- 7 September 2023
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 123 (18) , 11047-11136
Top Cited PapersZero-Dimensional Carbon Nanomaterials for Fluorescent Sensing and Imaging
Advances in nanotechnology and nanomaterials have attracted considerable interest and play key roles in scientific innovations in diverse fields. In particular, increased attention has been focused on carbon-based nanomaterials exhibiting diverse extended structures and unique properties. Among these materials, zero-dimensional structures, including fullerenes, carbon nano-onions, carbon nanodiamonds, and carbon dots, possess excellent bioaffinities and superior fluorescence properties that make these structures suitable for application to environmental and biological sensing, imaging, and therapeutics. This review provides a systematic overview of the classification and structural properties, design principles and preparation methods, and optical properties and sensing applications of zero-dimensional carbon nanomaterials. Recent interesting breakthroughs in the sensitive and selective sensing and imaging of heavy metal pollutants, hazardous substances, and bioactive molecules as well as applications in information encryption, super-resolution and photoacoustic imaging, and phototherapy and nanomedicine delivery are the main focus of this review. Finally, future challenges and prospects of these materials are highlighted and envisaged. This review presents a comprehensive basis and directions for designing, developing, and applying fascinating fluorescent sensors fabricated based on zero-dimensional carbon nanomaterials for specific requirements in numerous research fields.
- 18 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 21-25
Research and Practice on the Construction of E-Government Intranet Website: Case Study of the Ministry of Natural Resources
The construction of e-government intranet website (EGIW) is an important part of the national network platform and information construction, and plays an important role in promoting information sharing, business collaboration, learning and exchange between governments. This paper outlines the national management requirements for the EGIW. Taking the e-government intranet website of the Ministry of Natural Resources(EGIWMNR) as an example, it studies the construction ideas, content system construction, technology realization path, and construction achievements, and provides a real case to illustrate a series of technical means to achieve website information publishing and functions, and to break barriers between platforms to achieve system docking and data sharing, aiming at the existing problems, the future development goal and direction of EGIW are prospected.
- 18 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 21-25
Research and Practice on the Construction of E-Government Intranet Website: Case Study of the Ministry of Natural Resources
The construction of e-government intranet website (EGIW) is an important part of the national network platform and information construction, and plays an important role in promoting information sharing, business collaboration, learning and exchange between governments. This paper outlines the national management requirements for the EGIW. Taking the e-government intranet website of the Ministry of Natural Resources(EGIWMNR) as an example, it studies the construction ideas, content system construction, technology realization path, and construction achievements, and provides a real case to illustrate a series of technical means to achieve website information publishing and functions, and to break barriers between platforms to achieve system docking and data sharing, aiming at the existing problems, the future development goal and direction of EGIW are prospected.