Ion Iriarte
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ion Iriarte has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Daniel Justel
Mondragon Unibertsitatea Escuela Politecnica Superior, Arrasate, Basque country, Spain
2 shared publications Ganix Lasa
Design Innovation Center, Mondragon University Higher Polytechnic School, Arrasate, Basque Country, 20500, Spain
2 shared publicationsHien Nguyen Ngoc
Design Innovation Center, Mondragon University Higher Polytechnic School, Arrasate, Basque Country, 20500, Spain
2 shared publications- Iker Legarda
Faculty of Engineering, Design Innovation Centre (DBZ), Mondragon Unibertsitatea, Arrasate, Gipuzkoa, 20500, Spain
2 shared publications - Maya Hoveskog
Halmstad University
2 shared publications A. Retegi
University of Mondragon
1 shared publication
Latest Publications
- Open Access
- 4 August 2026
- Published by CERN in Open Research Europe
Overcoming Challenges in Implementing Condition Monitoring Services: Recommendations from an Expert Elicitation Exploratory Study
Background Condition Monitoring Services (CMS) have emerged as an important digitally enabled service offering within manufacturing servitization, allowing Original Equipment Manufacturers (OEMs) to remotely monitor equipment, improve maintenance performance, and create new service-based revenue streams. Despite the technological maturity of condition monitoring technologies, many OEMs continue to struggle with the successful implementation of CMS. This study aims to identify the challenges limiting CMS implementation, the solutions used to overcome these challenges, and the recommendations that can support successful CMS implementation. Methods An exploratory expert elicitation approach was adopted. Semi-structured interviews were conducted with 13 experts from OEMs, universities, research centres, and business consultancy organizations who possessed substantial experience in CMS implementation, digital servitization, and Industry 4.0. The interview data were analysed using inductive thematic analysis. Results The findings reveal that the principal barriers to CMS implementation are socio-technical rather than technological. Three interrelated groups of challenges were identified: challenges related to CMS value propositions, challenges associated with CMS design processes, and challenges concerning organizational and customer readiness. To address these challenges, experts proposed solutions centred on value quantification, co-creative and iterative service design, and service-oriented organizational capability development. The study further identified recommendations emphasizing customer-value-driven CMS design, dedicated and legitimate service units, and proactive management of organizational change. Conclusions Successful CMS implementation depends less on the sophistication of condition monitoring technologies and more on the ability of OEMs to align technological resources, organizational capabilities, customer requirements, and value creation mechanisms. By providing empirically grounded insights into the challenges, solutions, and recommendations associated with CMS implementation, this study extends both CMS and digital servitization literature and offers actionable CMS-specific guidance for OEMs seeking to transform condition monitoring technologies into sustainable service businesses.
- 4 August 2026
- Published by CERN in Open Research Europe
Open AccessOvercoming Challenges in Implementing Condition Monitoring Services: Recommendations from an Expert Elicitation Exploratory Study
Background Condition Monitoring Services (CMS) have emerged as an important digitally enabled service offering within manufacturing servitization, allowing Original Equipment Manufacturers (OEMs) to remotely monitor equipment, improve maintenance performance, and create new service-based revenue streams. Despite the technological maturity of condition monitoring technologies, many OEMs continue to struggle with the successful implementation of CMS. This study aims to identify the challenges limiting CMS implementation, the solutions used to overcome these challenges, and the recommendations that can support successful CMS implementation. Methods An exploratory expert elicitation approach was adopted. Semi-structured interviews were conducted with 13 experts from OEMs, universities, research centres, and business consultancy organizations who possessed substantial experience in CMS implementation, digital servitization, and Industry 4.0. The interview data were analysed using inductive thematic analysis. Results The findings reveal that the principal barriers to CMS implementation are socio-technical rather than technological. Three interrelated groups of challenges were identified: challenges related to CMS value propositions, challenges associated with CMS design processes, and challenges concerning organizational and customer readiness. To address these challenges, experts proposed solutions centred on value quantification, co-creative and iterative service design, and service-oriented organizational capability development. The study further identified recommendations emphasizing customer-value-driven CMS design, dedicated and legitimate service units, and proactive management of organizational change. Conclusions Successful CMS implementation depends less on the sophistication of condition monitoring technologies and more on the ability of OEMs to align technological resources, organizational capabilities, customer requirements, and value creation mechanisms. By providing empirically grounded insights into the challenges, solutions, and recommendations associated with CMS implementation, this study extends both CMS and digital servitization literature and offers actionable CMS-specific guidance for OEMs seeking to transform condition monitoring technologies into sustainable service businesses.
- Open Access
- 8 May 2026
- Published by Emerald Publishing in International Journal of Bank Marketing
- p. 1-30
Developing human-centred design capability in financial organisations
Purpose: The aim of this study is to provide a holistic understanding of how financial organisations can develop human-centred design (HCD) capability. Design/methodology/approach: We applied a hybrid research design. We first compiled a snowballing review of the literature to explore the key perspectives on developing HCD capability in organisations. Then, to validate and adapt our findings to the specific characteristics of financial organisations, we applied an expert elicitation process. Twelve expert designers leading HCD practices in the financial sector evaluated and built upon our findings to contribute to 10 managerial propositions aimed at helping financial organisations develop HCD capability. Findings: Our study provides an integrative view of the theoretical base and practical recommendations on how to develop HCD capability in financial organisations. The study suggests formulas for safe HCD experimentation, sustained investment for learning and mechanisms for continuous improvement and evaluation. Furthermore, our research stresses the importance of end-to-end involvement of HCD across the financial service lifecycle. Ultimately, we argue that HCD capability for effective development in financial organisations depends on legitimate leaders equipped with change management skills who can connect HCD to strategic decision-making in finance. Originality/value: The article proposes a comprehensive and research-backed proposal for developing HCD capability in financial organisations. Its value stems from providing practical guidance, bridging literature theory with real-world application in finance.
- 8 May 2026
- Published by Emerald Publishing in International Journal of Bank Marketing
- p. 1-30
Open AccessDeveloping human-centred design capability in financial organisations
Purpose: The aim of this study is to provide a holistic understanding of how financial organisations can develop human-centred design (HCD) capability. Design/methodology/approach: We applied a hybrid research design. We first compiled a snowballing review of the literature to explore the key perspectives on developing HCD capability in organisations. Then, to validate and adapt our findings to the specific characteristics of financial organisations, we applied an expert elicitation process. Twelve expert designers leading HCD practices in the financial sector evaluated and built upon our findings to contribute to 10 managerial propositions aimed at helping financial organisations develop HCD capability. Findings: Our study provides an integrative view of the theoretical base and practical recommendations on how to develop HCD capability in financial organisations. The study suggests formulas for safe HCD experimentation, sustained investment for learning and mechanisms for continuous improvement and evaluation. Furthermore, our research stresses the importance of end-to-end involvement of HCD across the financial service lifecycle. Ultimately, we argue that HCD capability for effective development in financial organisations depends on legitimate leaders equipped with change management skills who can connect HCD to strategic decision-making in finance. Originality/value: The article proposes a comprehensive and research-backed proposal for developing HCD capability in financial organisations. Its value stems from providing practical guidance, bridging literature theory with real-world application in finance.
- 17 July 2025
- Published by Universitat Politecnica de Valencia
- p. 1-11
La aplicación del Diseño Centrado en las Personas para el despliegue de la reforma curricular
Esta comunicación describe la aplicación del Diseño Centrado en las Personas para el despliegue de la reforma curricular del Máster Universitario en Diseño Estratégico de Productos y Servicios de Mondragon Unibertsitatea. En concreto, presenta cómo cuatro prácticas específicas del Diseño Centrado en las Personas: (i) investigación para el diseño, (ii) co-creación, (iii) herramientas de visualización y (iv) prototipado para al diseño, han sido aplicadas para la construcción de un marco curricular más centrado en la experiencia del alumnado. El resultado ha llevado al diseño de una experiencia formativa basada en la constitución conceptual de un KIBS (Knowledge Intensive Business Services) en el aula. El despliegue del piloto se ha realizado en base a un aprendizaje basado en retos con empresas. Los resultados preliminares indican un aumento de satisfacción del alumnado actual y aumento del interés por parte del alumnado potencial.
- 17 July 2025
- Published by Universitat Politecnica de Valencia
- p. 1-11
La aplicación del Diseño Centrado en las Personas para el despliegue de la reforma curricular
Esta comunicación describe la aplicación del Diseño Centrado en las Personas para el despliegue de la reforma curricular del Máster Universitario en Diseño Estratégico de Productos y Servicios de Mondragon Unibertsitatea. En concreto, presenta cómo cuatro prácticas específicas del Diseño Centrado en las Personas: (i) investigación para el diseño, (ii) co-creación, (iii) herramientas de visualización y (iv) prototipado para al diseño, han sido aplicadas para la construcción de un marco curricular más centrado en la experiencia del alumnado. El resultado ha llevado al diseño de una experiencia formativa basada en la constitución conceptual de un KIBS (Knowledge Intensive Business Services) en el aula. El despliegue del piloto se ha realizado en base a un aprendizaje basado en retos con empresas. Los resultados preliminares indican un aumento de satisfacción del alumnado actual y aumento del interés por parte del alumnado potencial.
- Open Access
- 29 May 2025
- Published by CERN in Open Research Europe
- Vol. 5, 151
Overcoming challenges in implementing condition monitoring services: expert elicitation
Background The introduction of the Internet of Things (IoT) has created new opportunities for servitization in manufacturing, enabling equipment providers to deliver digital services that enhance product performance and customer value. Among these, Condition Monitoring Services (CMS) have gained prominence, particularly with Original Equipment Manufacturers (OEMs) as a means to remotely monitor machinery, predict failures, and optimize maintenance. However, despite the technical maturity of these solutions, many OEMs struggle to translate CMS into sustainable business value. Methods This study draws on qualitative insights gathered through semi-structured interviews with 13 industry experts and academic researchers actively involved in designing, deploying, and studying CMS in manufacturing. A thematic analysis was conducted to identify recurring challenges and success factors in the commercialization and implementation of CMS. Results Findings reveal that while IoT infrastructure is a necessary enabler, CMS success hinges on the development of complementary organizational capabilities. These include service-oriented business design, alignment of internal processes, and the co-creation of value with customers. A lack of standardized performance metrics, uncertainty around data ownership, and difficulties in building trust with clients were identified as key barriers. The study offers actionable recommendations to address these issues, including the use of transparent accountability mechanisms and adaptive service development strategies. Conclusions This research advances the understanding of digital servitization in manufacturing by focusing specifically on the real-world implementation of CMS. It highlights the importance of integrating technological capabilities with strategic and organizational readiness. By presenting grounded insights from expert perspectives, the study provides practical guidance for OEMs aiming to transition from product-centric to service-oriented business models in the era of industrial IoT.
- 29 May 2025
- Published by CERN in Open Research Europe
- Vol. 5, 151
Open AccessOvercoming challenges in implementing condition monitoring services: expert elicitation
Background The introduction of the Internet of Things (IoT) has created new opportunities for servitization in manufacturing, enabling equipment providers to deliver digital services that enhance product performance and customer value. Among these, Condition Monitoring Services (CMS) have gained prominence, particularly with Original Equipment Manufacturers (OEMs) as a means to remotely monitor machinery, predict failures, and optimize maintenance. However, despite the technical maturity of these solutions, many OEMs struggle to translate CMS into sustainable business value. Methods This study draws on qualitative insights gathered through semi-structured interviews with 13 industry experts and academic researchers actively involved in designing, deploying, and studying CMS in manufacturing. A thematic analysis was conducted to identify recurring challenges and success factors in the commercialization and implementation of CMS. Results Findings reveal that while IoT infrastructure is a necessary enabler, CMS success hinges on the development of complementary organizational capabilities. These include service-oriented business design, alignment of internal processes, and the co-creation of value with customers. A lack of standardized performance metrics, uncertainty around data ownership, and difficulties in building trust with clients were identified as key barriers. The study offers actionable recommendations to address these issues, including the use of transparent accountability mechanisms and adaptive service development strategies. Conclusions This research advances the understanding of digital servitization in manufacturing by focusing specifically on the real-world implementation of CMS. It highlights the importance of integrating technological capabilities with strategic and organizational readiness. By presenting grounded insights from expert perspectives, the study provides practical guidance for OEMs aiming to transition from product-centric to service-oriented business models in the era of industrial IoT.
- Open Access
- 15 November 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (22) , 12580
A Model for Measuring and Managing the Impact of Design on the Organization: Insights from Four Companies
Increasing numbers of companies are looking to embed design as a strategic capability to meet today’s business and social challenges. However, integrating design in an organization is a challenge, due to the scarcity of knowledge on managing this process and measuring its impact. This study presents a model for measuring and managing the impact of design on the organization (DIMM). The model builds on four levels of design impact identified in the literature: results, perception, processes, and design culture. The model was tested with four service companies that have recently developed design capabilities. To this end, those responsible for the integration of design were interviewed, using the model itself as an interview guide to confirm its usefulness and identify possible improvements. The results showed that the model was useful to assess the impact of design on companies with emerging design capabilities, but also as a reflection and management tool to align design with strategic objectives and promote its integration into the organization. Finally, future research should test the model longitudinally, as well as in a broader scope of organizations, to validate its usefulness for organizations with greater design maturity.
- 15 November 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (22) , 12580
Open AccessA Model for Measuring and Managing the Impact of Design on the Organization: Insights from Four Companies
Increasing numbers of companies are looking to embed design as a strategic capability to meet today’s business and social challenges. However, integrating design in an organization is a challenge, due to the scarcity of knowledge on managing this process and measuring its impact. This study presents a model for measuring and managing the impact of design on the organization (DIMM). The model builds on four levels of design impact identified in the literature: results, perception, processes, and design culture. The model was tested with four service companies that have recently developed design capabilities. To this end, those responsible for the integration of design were interviewed, using the model itself as an interview guide to confirm its usefulness and identify possible improvements. The results showed that the model was useful to assess the impact of design on companies with emerging design capabilities, but also as a reflection and management tool to align design with strategic objectives and promote its integration into the organization. Finally, future research should test the model longitudinally, as well as in a broader scope of organizations, to validate its usefulness for organizations with greater design maturity.
- Top Cited PapersOpen Access
- 11 June 2021
- Published by Springer Nature in Journal of Intelligent Manufacturing
- Vol. 33 (1) , 35-76
Human-centred design in industry 4.0: case study review and opportunities for future research
The transition to industry 4.0 has impacted factories, but it also affects the entire value chain. In this sense, human-centred factors play a core role in transitioning to sustainable manufacturing processes and consumption. The awareness of human roles in Industry 4.0 is increasing, as evidenced by active work in developing methods, exploring influencing factors, and proving the effectiveness of design oriented to humans. However, numerous studies have been brought into existence but then disconnected from other studies. As a consequence, these studies in industry and research alike are not regularly adopted, and the network of studies is seemingly broad and expands without forming a coherent structure. This study is a unique attempt to bridge the gap through the literature characteristics and lessons learnt derived from a collection of case studies regarding human-centred design (HCD) in the context of Industry 4.0. This objective is achieved by a well-rounded systematic literature review whose special unit of analysis is given to the case studies, delivering contributions in three ways: (1) providing an insight into how the literature has evolved through the cross-disciplinary lens; (2) identifying what research themes associated with design methods are emerging in the field; (3) and setting the research agenda in the context of HCD in Industry 4.0, taking into account the lessons learnt, as uncovered by the in-depth review of case studies.
- 11 June 2021
- Published by Springer Nature in Journal of Intelligent Manufacturing
- Vol. 33 (1) , 35-76
Top Cited PapersOpen AccessHuman-centred design in industry 4.0: case study review and opportunities for future research
The transition to industry 4.0 has impacted factories, but it also affects the entire value chain. In this sense, human-centred factors play a core role in transitioning to sustainable manufacturing processes and consumption. The awareness of human roles in Industry 4.0 is increasing, as evidenced by active work in developing methods, exploring influencing factors, and proving the effectiveness of design oriented to humans. However, numerous studies have been brought into existence but then disconnected from other studies. As a consequence, these studies in industry and research alike are not regularly adopted, and the network of studies is seemingly broad and expands without forming a coherent structure. This study is a unique attempt to bridge the gap through the literature characteristics and lessons learnt derived from a collection of case studies regarding human-centred design (HCD) in the context of Industry 4.0. This objective is achieved by a well-rounded systematic literature review whose special unit of analysis is given to the case studies, delivering contributions in three ways: (1) providing an insight into how the literature has evolved through the cross-disciplinary lens; (2) identifying what research themes associated with design methods are emerging in the field; (3) and setting the research agenda in the context of HCD in Industry 4.0, taking into account the lessons learnt, as uncovered by the in-depth review of case studies.
- 1 April 2019
- Published by Taylor & Francis in The Design Journal
- Vol. 22 (sup1) , 37-49
To Be or Not to Be. The Servitization Dilemma and the Role of Design
(2019). To Be or Not to Be. The Servitization Dilemma and the Role of Design. The Design Journal: Vol. 22, Running with Scissors: 13th International Conference of the European Academy of Design, Dundee, 10-12th April, 2019, edited by Louise Valentine, Joanna Bletcher and Leon Cruickshank, pp. 37-49.
- 1 April 2019
- Published by Taylor & Francis in The Design Journal
- Vol. 22 (sup1) , 37-49
To Be or Not to Be. The Servitization Dilemma and the Role of Design
(2019). To Be or Not to Be. The Servitization Dilemma and the Role of Design. The Design Journal: Vol. 22, Running with Scissors: 13th International Conference of the European Academy of Design, Dundee, 10-12th April, 2019, edited by Louise Valentine, Joanna Bletcher and Leon Cruickshank, pp. 37-49.
- 27 September 2018
- Published by Springer Nature
- p. 127-141
MOTIVA-PRO: Innovation Based on Users’ Motivations
- 27 September 2018
- Published by Springer Nature
- p. 127-141
MOTIVA-PRO: Innovation Based on Users’ Motivations
- Open Access
- 9 April 2014
- Published by Design Research Society
Transforming Basque Manufacturing Companies through Service Design: Showing the Potential of Service Thinking
This short paper aims to illustrate the joint effort by Mondragon University’s Design Innovation Centre (DBZ) and the Mondragon Group’s Business Acceleration Centre (BAC Mondragon) to demonstrate to manufacturing companies the innovation potential of Service Thinking. In this initiative; Strategic Design students have used Service Design to create new service concepts based on Mondragon Group’s current products and manufacturing capabilities. The process and the results obtained were presented to Mondragon Group’s managers with the purpose to promote future Service Design projects. This initiative became the first stage of the Service Design for Industrial Enterprises (DISEI) project. DISEI is an ongoing knowledge transfer project that tries to introduce Service Thinking into the Basque industry as an innovation strategy.
- 9 April 2014
- Published by Design Research Society
Open AccessTransforming Basque Manufacturing Companies through Service Design: Showing the Potential of Service Thinking
This short paper aims to illustrate the joint effort by Mondragon University’s Design Innovation Centre (DBZ) and the Mondragon Group’s Business Acceleration Centre (BAC Mondragon) to demonstrate to manufacturing companies the innovation potential of Service Thinking. In this initiative; Strategic Design students have used Service Design to create new service concepts based on Mondragon Group’s current products and manufacturing capabilities. The process and the results obtained were presented to Mondragon Group’s managers with the purpose to promote future Service Design projects. This initiative became the first stage of the Service Design for Industrial Enterprises (DISEI) project. DISEI is an ongoing knowledge transfer project that tries to introduce Service Thinking into the Basque industry as an innovation strategy.