Norbert Hanik
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Norbert Hanik has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Daniel Plabst
Institute for Communications Engineering, Technical University of Munich, Munich, Germany
5 shared publications - Gerhard Kramer
Technical University of Munich
4 shared publications - Stefano Calabrò
Huawei Heisenberg Research Center, Munich, Germany
3 shared publications - Thomas Wiegart
Technical University of Munich Munich Germany
3 shared publications - Tobias Prinz
Institute for Communications Engineering at TUM, Germany
3 shared publications - Georg Böcherer
Huawei Munich Research Center, Munich, Germany
2 shared publications
Latest Publications
- 15 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (12) , 4860-4869
Burst Mode DSP and Preamble Design for Low Complexity TDMA CPON Upstream Transmission
- 15 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (12) , 4860-4869
Burst Mode DSP and Preamble Design for Low Complexity TDMA CPON Upstream Transmission
- Open Access
- 24 March 2026
- Published by Springer Nature
- p. 1-50
Ultra-Broadband Photonic Signal-Processor
Flexible, ultra-broadband, optical wavelength conversion will be one of the key issues in future optical multiband networks that make use of the full low-attenuation bandwidth of Standard Single-Mode Fibers (SSMF). This chapter outlines the authors’ work to realize broadband wavelength conversion between extreme optical wavelength bands using optimized multimodal optical waveguides with high cubic nonlinearity. In a first part, the physical principles of ultra-broadband optical wavelength conversion in a highly nonlinear multimodal Silicon-On-Insulator (SOI) waveguide, and methods to model and optimize its functionality, are explained. Subsequently, examples of optimized SOI waveguide designs are presented that enable ultra-broadband conversion of signals within, or between various low-attenuation wavelength bands of an optical fiber. In a second paragraph, the fabrication of SOI waveguides is delineated in general, and measured key parameters of samples of various generations of optimized waveguides are revealed. In a final section, the performance of the developed optical converters is demonstrated exemplarily in laboratory experiments.
- 24 March 2026
- Published by Springer Nature
- p. 1-50
Open AccessUltra-Broadband Photonic Signal-Processor
Flexible, ultra-broadband, optical wavelength conversion will be one of the key issues in future optical multiband networks that make use of the full low-attenuation bandwidth of Standard Single-Mode Fibers (SSMF). This chapter outlines the authors’ work to realize broadband wavelength conversion between extreme optical wavelength bands using optimized multimodal optical waveguides with high cubic nonlinearity. In a first part, the physical principles of ultra-broadband optical wavelength conversion in a highly nonlinear multimodal Silicon-On-Insulator (SOI) waveguide, and methods to model and optimize its functionality, are explained. Subsequently, examples of optimized SOI waveguide designs are presented that enable ultra-broadband conversion of signals within, or between various low-attenuation wavelength bands of an optical fiber. In a second paragraph, the fabrication of SOI waveguides is delineated in general, and measured key parameters of samples of various generations of optimized waveguides are revealed. In a final section, the performance of the developed optical converters is demonstrated exemplarily in laboratory experiments.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 18 (4) , 1-10
Analog Phase Precoding for Short-Reach Fiber Links with Direct Detection
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 18 (4) , 1-10
Open AccessAnalog Phase Precoding for Short-Reach Fiber Links with Direct Detection
- Open Access
- 19 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Selected Areas in Communications
- Vol. 43 (5) , 1440-1454
Closed-Form Expressions for Nonlinearity Coefficients in Multimode Fibers
We derive novel approximate closed-form expressions for the nonlinear coupling coefficients appearing in the Manakov equations for multimode fibers for space-division multiplexing in the two regimes of strong and weak coupling. The expressions depend only on few fiber design parameters. In particular, the Manakov coefficients are shown to be simple rational numbers which depend solely on the number of guided modes. The overall nonlinearity coefficients are found to decrease with increasing core radius and to stay nearly constant with increasing refractive index difference between core and cladding. Validation is performed through a numerical approach. The consequences of the findings onto fiber design are discussed in terms of achievable data rates. The analysis is mainly focused on the trenchless parabolic graded-index profile, but considerations on the use of realistic trenches and non-parabolic indices, and on the step-index profile are given.
- 19 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Selected Areas in Communications
- Vol. 43 (5) , 1440-1454
Open AccessClosed-Form Expressions for Nonlinearity Coefficients in Multimode Fibers
We derive novel approximate closed-form expressions for the nonlinear coupling coefficients appearing in the Manakov equations for multimode fibers for space-division multiplexing in the two regimes of strong and weak coupling. The expressions depend only on few fiber design parameters. In particular, the Manakov coefficients are shown to be simple rational numbers which depend solely on the number of guided modes. The overall nonlinearity coefficients are found to decrease with increasing core radius and to stay nearly constant with increasing refractive index difference between core and cladding. Validation is performed through a numerical approach. The consequences of the findings onto fiber design are discussed in terms of achievable data rates. The analysis is mainly focused on the trenchless parabolic graded-index profile, but considerations on the use of realistic trenches and non-parabolic indices, and on the step-index profile are given.
- Open Access
- 3 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 73 (3) , 1847-1861
Neural Network-Based Successive Interference Cancellation for Non-Linear Bandlimited Channels
Reliable communication over bandlimited and non-linear channels usually requires equalization to simplify receiver processing. Equalizers that perform joint detection and decoding (JDD) achieve the highest information rates but are often too complex to implement. To address this challenge, model-based neural network (NN) equalizers that perform successive interference cancellation (SIC) are shown to approach JDD information rates for bandlimited channels with a memoryless nonlinearity and additive white Gaussian noise. The NNs are chosen to have a periodically time-varying and recurrent structure that imitates the forward-backward algorithm (FBA) in every SIC stage. Simulations for short-haul fiber-optic links with square-law detection show that NN-SIC nearly doubles current spectral efficiencies, and bipolar or complex-valued modulations achieve energy gains of up to 3 dB compared to state-of-the-art intensity modulation. Moreover, NN-SIC is considerably less complex than equalizers that perform JDD, mismatched FBA processing, and Gibbs sampling.
- 3 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 73 (3) , 1847-1861
Open AccessNeural Network-Based Successive Interference Cancellation for Non-Linear Bandlimited Channels
Reliable communication over bandlimited and non-linear channels usually requires equalization to simplify receiver processing. Equalizers that perform joint detection and decoding (JDD) achieve the highest information rates but are often too complex to implement. To address this challenge, model-based neural network (NN) equalizers that perform successive interference cancellation (SIC) are shown to approach JDD information rates for bandlimited channels with a memoryless nonlinearity and additive white Gaussian noise. The NNs are chosen to have a periodically time-varying and recurrent structure that imitates the forward-backward algorithm (FBA) in every SIC stage. Simulations for short-haul fiber-optic links with square-law detection show that NN-SIC nearly doubles current spectral efficiencies, and bipolar or complex-valued modulations achieve energy gains of up to 3 dB compared to state-of-the-art intensity modulation. Moreover, NN-SIC is considerably less complex than equalizers that perform JDD, mismatched FBA processing, and Gibbs sampling.
- Open Access
Successive Interference Cancellation for Bandlimited Channels with Direct Detection
The maximum information rates for bandlimited channels with direct detection are achieved with joint detection and decoding (JDD), but JDD is often too complex to implement. Two receiver structures are studied to reduce complexity: separate detection and decoding (SDD) and successive interference cancellation (SIC). For bipolar modulation, frequency-domain raised-cosine pulse shaping, and fiber-optic channels with chromatic dispersion, SIC achieves rates close to those of JDD, thereby attaining significant energy gains over SDD and intensity modulation. Gibbs sampling further reduces the detector complexity and achieves rates close to those of the forward-backward algorithm at low to intermediate signal-to-noise ratio (SNR) but stalls at high SNR. Simulations with polar codes, higher-order modulation, and multi-level coding confirm the predicted gains.
Open AccessSuccessive Interference Cancellation for Bandlimited Channels with Direct Detection
The maximum information rates for bandlimited channels with direct detection are achieved with joint detection and decoding (JDD), but JDD is often too complex to implement. Two receiver structures are studied to reduce complexity: separate detection and decoding (SDD) and successive interference cancellation (SIC). For bipolar modulation, frequency-domain raised-cosine pulse shaping, and fiber-optic channels with chromatic dispersion, SIC achieves rates close to those of JDD, thereby attaining significant energy gains over SDD and intensity modulation. Gibbs sampling further reduces the detector complexity and achieves rates close to those of the forward-backward algorithm at low to intermediate signal-to-noise ratio (SNR) but stalls at high SNR. Simulations with polar codes, higher-order modulation, and multi-level coding confirm the predicted gains.
- 27 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 72 (3) , 1330-1340
Successive Interference Cancellation for Bandlimited Channels With Direct Detection
The maximum information rates for bandlimited channels with direct detection are achieved with joint detection and decoding (JDD), but JDD is often too complex to implement. Two receiver structures are studied to reduce complexity: separate detection and decoding (SDD) and successive interference cancellation (SIC). For bipolar modulation, frequency-domain raised-cosine pulse shaping, and fiber-optic channels with chromatic dispersion, SIC achieves rates close to those of JDD, thereby attaining significant energy gains over SDD and intensity modulation. Gibbs sampling further reduces the detector complexity and achieves rates close to those of the forward-backward algorithm at low to intermediate signal-to-noise ratio (SNR) but stalls at high SNR. Simulations with polar codes, higher-order modulation, and multi-level coding confirm the predicted gains.
- 27 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 72 (3) , 1330-1340
Successive Interference Cancellation for Bandlimited Channels With Direct Detection
The maximum information rates for bandlimited channels with direct detection are achieved with joint detection and decoding (JDD), but JDD is often too complex to implement. Two receiver structures are studied to reduce complexity: separate detection and decoding (SDD) and successive interference cancellation (SIC). For bipolar modulation, frequency-domain raised-cosine pulse shaping, and fiber-optic channels with chromatic dispersion, SIC achieves rates close to those of JDD, thereby attaining significant energy gains over SDD and intensity modulation. Gibbs sampling further reduces the detector complexity and achieves rates close to those of the forward-backward algorithm at low to intermediate signal-to-noise ratio (SNR) but stalls at high SNR. Simulations with polar codes, higher-order modulation, and multi-level coding confirm the predicted gains.
- Open Access
- 22 October 2022
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 54 (12) , 1-12
Analysis of material susceptibility in silicon on insulator waveguides with combined simulation of four-wave mixing and linear mode coupling
We derive propagation equations modeling third-order susceptibility-induced nonlinear interaction and linear mode coupling in waveguides. We model material susceptibility with Raman and electronic response which include approximations suited for optical communications. We validate our model by comparing numerical integration of the propagation equations to continuous wave measurements of a silicon on insulator waveguide.
- 22 October 2022
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 54 (12) , 1-12
Open AccessAnalysis of material susceptibility in silicon on insulator waveguides with combined simulation of four-wave mixing and linear mode coupling
We derive propagation equations modeling third-order susceptibility-induced nonlinear interaction and linear mode coupling in waveguides. We model material susceptibility with Raman and electronic response which include approximations suited for optical communications. We validate our model by comparing numerical integration of the propagation equations to continuous wave measurements of a silicon on insulator waveguide.
- Open Access
Back-to-Back Performance of the Full Spectrum Nonlinear Fourier Transform and Its Inverse
In this paper, data-transmission using the nonlinear Fourier transform for jointly modulated discrete and continuous spectra is investigated. A recent method for purely discrete eigenvalue removal at the detector is extended to signals with additional continuous spectral support. At first, the eigenvalues are sequentially detected and removed from the jointly modulated received signal. After each successful removal, the time-support of the resulting signal for the next iteration can be narrowed, until all eigenvalues are removed. The resulting truncated signal, ideally containing only continuous spectral components, is then recovered by a standard NFT algorithm. Numerical simulations without a fiber channel show that, for jointly modulated discrete and continuous spectra, the mean-squared error between transmitted and received eigenvalues can be reduced using the eigenvalue removal approach, when compared to state-of-the-art detection methods. Additionally, the computational complexity for detection of both spectral components can be decreased when, by the choice of the modulated eigenvalues, the time-support after each removal step can be reduced. Numerical simulations are also carried out for transmission over a Raman-amplified, lossy SSMF channel. The mutual information is approximated and the eigenvalue removal method is shown to result in achievable rate improvements.
Open AccessBack-to-Back Performance of the Full Spectrum Nonlinear Fourier Transform and Its Inverse
In this paper, data-transmission using the nonlinear Fourier transform for jointly modulated discrete and continuous spectra is investigated. A recent method for purely discrete eigenvalue removal at the detector is extended to signals with additional continuous spectral support. At first, the eigenvalues are sequentially detected and removed from the jointly modulated received signal. After each successful removal, the time-support of the resulting signal for the next iteration can be narrowed, until all eigenvalues are removed. The resulting truncated signal, ideally containing only continuous spectral components, is then recovered by a standard NFT algorithm. Numerical simulations without a fiber channel show that, for jointly modulated discrete and continuous spectra, the mean-squared error between transmitted and received eigenvalues can be reduced using the eigenvalue removal approach, when compared to state-of-the-art detection methods. Additionally, the computational complexity for detection of both spectral components can be decreased when, by the choice of the modulated eigenvalues, the time-support after each removal step can be reduced. Numerical simulations are also carried out for transmission over a Raman-amplified, lossy SSMF channel. The mutual information is approximated and the eigenvalue removal method is shown to result in achievable rate improvements.
- Open Access
Experimental Comparison of Probabilistic Shaping Methods for Unrepeated Fiber Transmission
This paper studies the impact of probabilistic shaping on effective signal-to-noise ratios (SNRs) and achievable information rates (AIRs) in a back-to-back configuration and in unrepeated nonlinear fiber transmissions. For back-to-back, various shaped quadrature amplitude modulation (QAM) distributions are found to have the same implementation penalty as uniform input. By demonstrating in transmission experiments that shaped QAM input leads to lower effective SNR than uniform input at a fixed average launch power, we experimentally confirm that shaping enhances the fiber nonlinearities. However, shaping is ultimately found to increase the AIR, which is the most relevant figure of merit as it is directly related to spectral efficiency. In a detailed study of these shaping gains for the nonlinear fiber channel, four strategies for optimizing QAM input distributions are evaluated and experimentally compared in wavelength division multiplexing (WDM) systems. The first shaping scheme generates a Maxwell-Boltzmann (MB) distribution based on a linear additive white Gaussian noise channel. The second strategy uses the Blahut-Arimoto algorithm to optimize an unconstrained QAM distribution for a split-step Fourier method based channel model. In the third and fourth approach, MB-shaped QAM and unconstrained QAM are optimized via the enhanced Gaussian noise (EGN) model. Although the absolute shaping gains are found to be relatively small, the relative improvements by EGN-optimized unconstrained distributions over linear AWGN optimized MB distributions are up to 59%. This general behavior is observed in 9-channel and fully loaded WDM experiments.
Open AccessExperimental Comparison of Probabilistic Shaping Methods for Unrepeated Fiber Transmission
This paper studies the impact of probabilistic shaping on effective signal-to-noise ratios (SNRs) and achievable information rates (AIRs) in a back-to-back configuration and in unrepeated nonlinear fiber transmissions. For back-to-back, various shaped quadrature amplitude modulation (QAM) distributions are found to have the same implementation penalty as uniform input. By demonstrating in transmission experiments that shaped QAM input leads to lower effective SNR than uniform input at a fixed average launch power, we experimentally confirm that shaping enhances the fiber nonlinearities. However, shaping is ultimately found to increase the AIR, which is the most relevant figure of merit as it is directly related to spectral efficiency. In a detailed study of these shaping gains for the nonlinear fiber channel, four strategies for optimizing QAM input distributions are evaluated and experimentally compared in wavelength division multiplexing (WDM) systems. The first shaping scheme generates a Maxwell-Boltzmann (MB) distribution based on a linear additive white Gaussian noise channel. The second strategy uses the Blahut-Arimoto algorithm to optimize an unconstrained QAM distribution for a split-step Fourier method based channel model. In the third and fourth approach, MB-shaped QAM and unconstrained QAM are optimized via the enhanced Gaussian noise (EGN) model. Although the absolute shaping gains are found to be relatively small, the relative improvements by EGN-optimized unconstrained distributions over linear AWGN optimized MB distributions are up to 59%. This general behavior is observed in 9-channel and fully loaded WDM experiments.