Eric Bernier
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Eric Bernier has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Dominic J. Goodwill
Huawei Canada Company, Ltd., Ottawa, ON, Canada
3 shared publications - Hamid Mehrvar
Huawei Technologies Canada Ottawa Canada
2 shared publications Huixiao Ma
Huawei Technology, Canada
2 shared publications- Pierre Berini
University of Ottawa
2 shared publications Xiaoling Yang
Huawei Technology, Canada
2 shared publicationsYan Wang
Huawei Technology, Canada
2 shared publications
Latest Publications
- Open Access
- 27 February 2024
- Published by Wiley in Nanophotonics
- Vol. 13 (6) , 901-913
Electrically tunable plasmonic metasurface as a matrix of nanoantennas
We report the fabrication and characterization of a plasmonic metasurface comprising electrically‐contacted sub‐wavelength gold dipole nanoantennas, conformally coated by a thin hafnia film, an indium tin oxide layer and a backside mirror, forming metal–oxide–semiconductor (MOS) capacitors, for use as an electrically‐tunable reflectarray or metasurface. By voltage biasing the nanoantennas through metallic connectors and leveraging the carrier refraction effect in the MOS capacitors, our measurements demonstrate phase control in reflection over a range of about 30°, with a constant magnitude of reflection coefficient of 0.5, and the absence of secondary lobes. Comprehensive electromagnetic and quantum carrier models of the structure are developed and are in excellent agreement with the measurements. The metasurface holds promise for use as an optical phased array.
- 27 February 2024
- Published by Wiley in Nanophotonics
- Vol. 13 (6) , 901-913
Open AccessElectrically tunable plasmonic metasurface as a matrix of nanoantennas
We report the fabrication and characterization of a plasmonic metasurface comprising electrically‐contacted sub‐wavelength gold dipole nanoantennas, conformally coated by a thin hafnia film, an indium tin oxide layer and a backside mirror, forming metal–oxide–semiconductor (MOS) capacitors, for use as an electrically‐tunable reflectarray or metasurface. By voltage biasing the nanoantennas through metallic connectors and leveraging the carrier refraction effect in the MOS capacitors, our measurements demonstrate phase control in reflection over a range of about 30°, with a constant magnitude of reflection coefficient of 0.5, and the absence of secondary lobes. Comprehensive electromagnetic and quantum carrier models of the structure are developed and are in excellent agreement with the measurements. The metasurface holds promise for use as an optical phased array.
- Open Access
Ring Resonator Gap Determination Design Rule and Parameter Extraction Method for Sub-GHz Resolution Whole C-Band Si3N4 Integrated Spectrometer
A panoramic ultra-high resolution photonic integrated circuit spectrometer is under development by the authors. The architecture comprises a tunable ring resonator (RR) stage and an AWG stage. The resolution defines the bandwidth of the RR, determined by the cross-coupled power and hence the gap between the access and ring waveguides. The AWG channel frequency spacing determines the required free-spectral range (FSR) and hence the perimeter of the ring resonator. The specified 3N4 platform. The parameter extraction method is used to analyze the measured characterization data of the ring resonators. The results show good agreement within ~43 nm between the design rule and the gaps size determined by the parameters extracted from the measured data and provide experimental confirmation of the technological viability of the ring resonators required by the spectrometer.
Open AccessRing Resonator Gap Determination Design Rule and Parameter Extraction Method for Sub-GHz Resolution Whole C-Band Si3N4 Integrated Spectrometer
A panoramic ultra-high resolution photonic integrated circuit spectrometer is under development by the authors. The architecture comprises a tunable ring resonator (RR) stage and an AWG stage. The resolution defines the bandwidth of the RR, determined by the cross-coupled power and hence the gap between the access and ring waveguides. The AWG channel frequency spacing determines the required free-spectral range (FSR) and hence the perimeter of the ring resonator. The specified 3N4 platform. The parameter extraction method is used to analyze the measured characterization data of the ring resonators. The results show good agreement within ~43 nm between the design rule and the gaps size determined by the parameters extracted from the measured data and provide experimental confirmation of the technological viability of the ring resonators required by the spectrometer.
- Open Access
- 29 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 27 (1) , 1-16
Tunable Plasmonic Metasurfaces for Optical Phased Arrays
Controlling the phase and amplitude of light emitted by the elements (i.e., pixels) of an optical phased array is of paramount importance to realizing dynamic beam steering for LIDAR applications. In this paper, we propose a plasmonic pixel composed of a metallic nanoantenna covered by a thin oxide layer, and a conductive oxide, e.g., ITO, for use in a reflectarray metasurface. By considering voltage biasing of the nanoantenna via metallic connectors, and exploiting the carrier refraction effect in the metal-oxide-semiconductor capacitor in the accumulation and depletion regions, our simulations predict control of the reflection coefficient phase over a range >330° with a nearly constant magnitude. We discuss the physical mechanism underlying the optical response, the effect of the connectors, and propose strategies to maximize the magnitude of the reflection coefficient and to achieve dual-band operation. The suitability of our plasmonic pixel design for beam steering in LIDAR is demonstrated via 3D-FDTD simulations.
- 29 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 27 (1) , 1-16
Open AccessTunable Plasmonic Metasurfaces for Optical Phased Arrays
Controlling the phase and amplitude of light emitted by the elements (i.e., pixels) of an optical phased array is of paramount importance to realizing dynamic beam steering for LIDAR applications. In this paper, we propose a plasmonic pixel composed of a metallic nanoantenna covered by a thin oxide layer, and a conductive oxide, e.g., ITO, for use in a reflectarray metasurface. By considering voltage biasing of the nanoantenna via metallic connectors, and exploiting the carrier refraction effect in the metal-oxide-semiconductor capacitor in the accumulation and depletion regions, our simulations predict control of the reflection coefficient phase over a range >330° with a nearly constant magnitude. We discuss the physical mechanism underlying the optical response, the effect of the connectors, and propose strategies to maximize the magnitude of the reflection coefficient and to achieve dual-band operation. The suitability of our plasmonic pixel design for beam steering in LIDAR is demonstrated via 3D-FDTD simulations.
- 1 January 2015
- Published by Optica Publishing Group
- p. Tu2H.4
40Gb/s Pure Photonic Packet Switch for Datacenters
We demonstrate a pure 40G photonic packet switch for datacenters based on photonic wrap/un-wrap, separation of control from data path and a synchronization scheme to align packets of all nodes at the photonic switch inputs.
- 1 January 2015
- Published by Optica Publishing Group
- p. Tu2H.4
40Gb/s Pure Photonic Packet Switch for Datacenters
We demonstrate a pure 40G photonic packet switch for datacenters based on photonic wrap/un-wrap, separation of control from data path and a synchronization scheme to align packets of all nodes at the photonic switch inputs.
- 1 January 2014
- Published by Optica Publishing Group
- p. JT5C.2
Photonic Switching of Native Ethernet Frames for Data Centers
We show new techniques of compression, scrambling, and packet size discrimination to implement a photonic-electronic hybrid switch that handle native Ethernet frames. The photonic switch is designed for a silicon photonic switch core.
- 1 January 2014
- Published by Optica Publishing Group
- p. JT5C.2
Photonic Switching of Native Ethernet Frames for Data Centers
We show new techniques of compression, scrambling, and packet size discrimination to implement a photonic-electronic hybrid switch that handle native Ethernet frames. The photonic switch is designed for a silicon photonic switch core.