Xiaoguang Qiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaoguang Qiao has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Mingyi Zheng
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
2 shared publications Changyu Hu
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin, China
1 shared publication- Changyu Hu
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
1 shared publication - Chuanting Wang
Nanjing University of Science and Technology
1 shared publication - Fuguan Cong
Northeast Light Alloy Company Limited, Harbin 150060, China
1 shared publication - Guojun Wang
Northeast Light Alloy Company Limited, Harbin 150060, China
1 shared publication
Latest Publications
- Open Access
Editorial for the Special Issue “Materials under High Pressure”
The high-pressure-related problems of materials constitute a field at the confluence of several scientific disciplines
Open AccessEditorial for the Special Issue “Materials under High Pressure”
The high-pressure-related problems of materials constitute a field at the confluence of several scientific disciplines
- Open Access
The Tensile Properties and Fracture Toughness of a Cast Mg-9Gd-4Y-0.5Zr Alloy
Low fracture toughness has been a major barrier for the structural applications of cast Mg-Gd-Y-Zr alloys. In this work, the tensile properties and fracture toughness of a direct-chill-cast Mg-9Gd-4Y-0.5Zr (VW94K) alloy were investigated in different conditions, including its as-cast and as-homogenized states. The results show that the tensile properties of the as-cast VW94K alloy are greatly improved after the homogenization treatment due to the strengthening of the solid solution. The plane strain fracture toughness values KIc of the as-cast and as-homogenized VW94K alloys are 10.6 ± 0.5 and 13.8 ± 0.6 MPa·m1/2, respectively, i.e., an improvement of 30.2% in KIc is achieved via the dissolution of the Mg24(Gd, Y)5 eutectic phases. The initiation and propagation of microcracks in an interrupted fracture test are observed via an optical microscope (OM) and scanning electron microscope (SEM). The fracture surfaces of the failed samples after the fracture toughness tests are examined via an SEM. The electron backscatter diffraction (EBSD) technique is adopted to determine the failure mechanism. The results show that the microcracks are initiated and propagated across the Mg24(Gd, Y)5 eutectic compounds in the as-cast VW94K alloy. The propagation of the main cracks exhibits an intergranular fracture pattern and the whole crack propagation path displays a zigzag style. The microcracks in the as-homogenized alloy are initiated and propagated along the basal plane of the grains. The main crack in the as-homogenized alloy shows a more tortuous fracture characteristic and a trans-granular crack propagation behavior, leading to the improvement of the fracture toughness.
Open AccessThe Tensile Properties and Fracture Toughness of a Cast Mg-9Gd-4Y-0.5Zr Alloy
Low fracture toughness has been a major barrier for the structural applications of cast Mg-Gd-Y-Zr alloys. In this work, the tensile properties and fracture toughness of a direct-chill-cast Mg-9Gd-4Y-0.5Zr (VW94K) alloy were investigated in different conditions, including its as-cast and as-homogenized states. The results show that the tensile properties of the as-cast VW94K alloy are greatly improved after the homogenization treatment due to the strengthening of the solid solution. The plane strain fracture toughness values KIc of the as-cast and as-homogenized VW94K alloys are 10.6 ± 0.5 and 13.8 ± 0.6 MPa·m1/2, respectively, i.e., an improvement of 30.2% in KIc is achieved via the dissolution of the Mg24(Gd, Y)5 eutectic phases. The initiation and propagation of microcracks in an interrupted fracture test are observed via an optical microscope (OM) and scanning electron microscope (SEM). The fracture surfaces of the failed samples after the fracture toughness tests are examined via an SEM. The electron backscatter diffraction (EBSD) technique is adopted to determine the failure mechanism. The results show that the microcracks are initiated and propagated across the Mg24(Gd, Y)5 eutectic compounds in the as-cast VW94K alloy. The propagation of the main cracks exhibits an intergranular fracture pattern and the whole crack propagation path displays a zigzag style. The microcracks in the as-homogenized alloy are initiated and propagated along the basal plane of the grains. The main crack in the as-homogenized alloy shows a more tortuous fracture characteristic and a trans-granular crack propagation behavior, leading to the improvement of the fracture toughness.