Michael A. Greig
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Michael A. Greig has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Walther Patrick Neumann
Toronto Metropolitan University
13 shared publications - Filippo A. Salustri
Ryerson University
5 shared publications - Nancy Purdy
Daphne Cockwell School of Nursing, Toronto Metropolitan University (Formerly Ryerson University), Toronto, Canada
5 shared publications - Sadeem Munawar Qureshi
Ryerson University
5 shared publications - Aftab E. Patla
Gait and Posture Laboratory, Department of Kinesiology, University of Waterloo, Waterloo, Canada
3 shared publications Anne Vandeursen
Sunnybrook Health Sciences Centre, Toronto, Ontario, Canada
3 shared publications
Latest Publications
- Open Access
- 11 November 2025
- Published by Taylor & Francis in International Journal of Production Research
- Vol. 64 (7) , 2510-2530
Modelling physical fatigue and recovery patterns within and across multiple shifts using a healthcare example
- 11 November 2025
- Published by Taylor & Francis in International Journal of Production Research
- Vol. 64 (7) , 2510-2530
Open AccessModelling physical fatigue and recovery patterns within and across multiple shifts using a healthcare example
- 8 November 2025
- Published by Taylor & Francis in IISE Transactions on Occupational Ergonomics and Human Factors
- Vol. 14 (3) , 320-329
Interpreting Workload Variation Using Fatigue-Recovery Modeling
- 8 November 2025
- Published by Taylor & Francis in IISE Transactions on Occupational Ergonomics and Human Factors
- Vol. 14 (3) , 320-329
Interpreting Workload Variation Using Fatigue-Recovery Modeling
- Open Access
- 1 February 2024
- Published by Taylor & Francis in Nursing: Research and Reviews
- Vol. ume 14, 59-67
Commentary on the Past, Present, and Future of Nursing Workload Research
The aim of this paper is to enhance readers’ understanding of research design strategies, past and present, for studying nursing workloads. Future research directions are also discussed. Nursing workloads are associated with nurse burnout and turnover. During our current global nursing shortage, researchers must identify ways to mitigate nurses’ heavy workloads. Relevant, prior nursing workload research is presented with brief descriptions of designs, methods and findings. To illustrate the current complexity of nurses’ work environments and the myriad factors that influence nurses’ workloads, this paper features the ongoing nursing workload research of two Canadian research teams with different methodological approaches. These two teams are employing current research innovations, such as human factors multi-systems frameworks, design thinking, simulation modeling and integrated knowledge translation. With respect to future research implications, the teams are melding methods and tools to promote a more sophisticated way of understanding the complex linkages between patient needs, systems design and the management of nurses’ workloads.
- 1 February 2024
- Published by Taylor & Francis in Nursing: Research and Reviews
- Vol. ume 14, 59-67
Open AccessCommentary on the Past, Present, and Future of Nursing Workload Research
The aim of this paper is to enhance readers’ understanding of research design strategies, past and present, for studying nursing workloads. Future research directions are also discussed. Nursing workloads are associated with nurse burnout and turnover. During our current global nursing shortage, researchers must identify ways to mitigate nurses’ heavy workloads. Relevant, prior nursing workload research is presented with brief descriptions of designs, methods and findings. To illustrate the current complexity of nurses’ work environments and the myriad factors that influence nurses’ workloads, this paper features the ongoing nursing workload research of two Canadian research teams with different methodological approaches. These two teams are employing current research innovations, such as human factors multi-systems frameworks, design thinking, simulation modeling and integrated knowledge translation. With respect to future research implications, the teams are melding methods and tools to promote a more sophisticated way of understanding the complex linkages between patient needs, systems design and the management of nurses’ workloads.
- 30 August 2023
- Published by Elsevier in Applied Ergonomics
- Vol. 114, 104124
Computer simulation as a macroergonomic approach to assessing nurse workload and biomechanics related to COVID-19 patient care
- 30 August 2023
- Published by Elsevier in Applied Ergonomics
- Vol. 114, 104124
Computer simulation as a macroergonomic approach to assessing nurse workload and biomechanics related to COVID-19 patient care
- 6 February 2023
- Published by Taylor & Francis in Ergonomics
- Vol. 66 (12) , 1868-1883
Examining human factors and ergonomics aspects in a manufacturing organisation’s metrics system: measuring up to stakeholder needs
This research examines the status of human factors and ergonomics (HF/E) metrics in the case context of product realization in an electronics manufacturing company. Interactions with 100+ stakeholders over a five year period were thematically analyzed for metrics-related views and content. A disconnect between engineering metrics and HF/E metrics was evident. Engineers and HF/E specialists expressed different understandings of the gap between the disciplines and how to generate HF/E metrics that would fit the organisation. Other emerging themes provided insight for metrics development including: improving indicator relatability, considerations for communication of information, and barriers to implementation of metrics. The results led to seven recommendations to help guide practitioners in developing and refining HF/E metrics as part of an organisation's metrics system. This macroergonomic case study provides key points for consideration when developing HF/E focussed metrics to support organisations being more proactive with HF/E in work system design. Metrics’ presence, stakeholder views on metrics, and metrics-related content in a case organisation were thematically analysed with a macroergonomics focus. Human factors and ergonomics metrics (HF/E) were disconnected from engineering metrics thus limiting the design team’s ability to handle human factors in design. Factors influencing HF/E metrics creation and integration were identified, resulting in seven recommendations for developing HF/E metrics.
- 6 February 2023
- Published by Taylor & Francis in Ergonomics
- Vol. 66 (12) , 1868-1883
Examining human factors and ergonomics aspects in a manufacturing organisation’s metrics system: measuring up to stakeholder needs
This research examines the status of human factors and ergonomics (HF/E) metrics in the case context of product realization in an electronics manufacturing company. Interactions with 100+ stakeholders over a five year period were thematically analyzed for metrics-related views and content. A disconnect between engineering metrics and HF/E metrics was evident. Engineers and HF/E specialists expressed different understandings of the gap between the disciplines and how to generate HF/E metrics that would fit the organisation. Other emerging themes provided insight for metrics development including: improving indicator relatability, considerations for communication of information, and barriers to implementation of metrics. The results led to seven recommendations to help guide practitioners in developing and refining HF/E metrics as part of an organisation's metrics system. This macroergonomic case study provides key points for consideration when developing HF/E focussed metrics to support organisations being more proactive with HF/E in work system design. Metrics’ presence, stakeholder views on metrics, and metrics-related content in a case organisation were thematically analysed with a macroergonomics focus. Human factors and ergonomics metrics (HF/E) were disconnected from engineering metrics thus limiting the design team’s ability to handle human factors in design. Factors influencing HF/E metrics creation and integration were identified, resulting in seven recommendations for developing HF/E metrics.
- Open Access
- 13 October 2022
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 17 (10) , e0275890
Modelling the impacts of COVID-19 on nurse workload and quality of care using process simulation
Higher acuity levels in COVID-19 patients and increased infection prevention and control routines have increased the work demands on nurses. To understand and quantify these changes, discrete event simulation (DES) was used to quantify the effects of varying the number of COVID-19 patient assignments on nurse workload and quality of care. Model testing was based on the usual nurse-patient ratio of 1:5 while varying the number of COVID-19 positive patients from 0 to 5. The model was validated by comparing outcomes to a step counter field study test with eight nurses. The DES model showed that nurse workload increased, and the quality of care deteriorated as nurses were assigned more COVID-19 positive patients. With five COVID-19 positive patients, the most demanding condition, the simulant-nurse donned and doffed personal protective equipment (PPE) 106 times a shift, totaling 6.1 hours. Direct care time was reduced to 3.4 hours (-64% change from baseline pre-pandemic case). In addition, nurses walked 10.5km (+46% increase from base pre-pandemic conditions) per shift while 75 care tasks (+242%), on average, were in the task queue. This contributed to 143 missed care tasks (+353% increase from base pre-pandemic conditions), equivalent to 9.6 hours (+311%) of missed care time and care task waiting time increased to 1.2 hours (+70%), in comparison to baseline (pre-pandemic) conditions. This process simulation approach may be used as potential decision support tools in the design and management of hospitals in-patient care settings, including pandemic planning scenarios.
- 13 October 2022
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 17 (10) , e0275890
Open AccessModelling the impacts of COVID-19 on nurse workload and quality of care using process simulation
Higher acuity levels in COVID-19 patients and increased infection prevention and control routines have increased the work demands on nurses. To understand and quantify these changes, discrete event simulation (DES) was used to quantify the effects of varying the number of COVID-19 patient assignments on nurse workload and quality of care. Model testing was based on the usual nurse-patient ratio of 1:5 while varying the number of COVID-19 positive patients from 0 to 5. The model was validated by comparing outcomes to a step counter field study test with eight nurses. The DES model showed that nurse workload increased, and the quality of care deteriorated as nurses were assigned more COVID-19 positive patients. With five COVID-19 positive patients, the most demanding condition, the simulant-nurse donned and doffed personal protective equipment (PPE) 106 times a shift, totaling 6.1 hours. Direct care time was reduced to 3.4 hours (-64% change from baseline pre-pandemic case). In addition, nurses walked 10.5km (+46% increase from base pre-pandemic conditions) per shift while 75 care tasks (+242%), on average, were in the task queue. This contributed to 143 missed care tasks (+353% increase from base pre-pandemic conditions), equivalent to 9.6 hours (+311%) of missed care time and care task waiting time increased to 1.2 hours (+70%), in comparison to baseline (pre-pandemic) conditions. This process simulation approach may be used as potential decision support tools in the design and management of hospitals in-patient care settings, including pandemic planning scenarios.
- 23 August 2022
- Published by Taylor & Francis in Ergonomics
- Vol. 66 (7) , 886-903
Developing a simulation tool to quantify biomechanical load and quality of care in nursing
Nursing is a high musculoskeletal disorder (MSD) risk job with high workload demands. This study combines Digital Human Modelling (DHM) and Discrete Event Simulation (DES) to address the need for tools to better manage MSD risk. This novel approach quantifies physical-workload, work-performance, and quality-of-care, in response to varying geographical patient-bed assignments, patient-acuity levels, and nurse-patient ratios. Lumbar loads for 86 care-delivery tasks in an acute care hospital unit were used as inputs in a DES model of the care-delivery process, creating a shift-long time trace of the biomechanical load. Peak L4/L5 compression and moment were 3574 N and 111.58 Nm, respectively. This study reports trade-offs in all three experiments: (i) increasing geographical patient-bed assignment distance decreased L4/L5 compression (8.8%); (ii) increased patient-acuity decreased L4/L5 moment (4%); (iii) Increased nurse-patient ratio decreased L4/L5 compression (10%) and moment (17%). However, in all experiments, Quality of care indicators deteriorated (20, 19, and 29%, respectively). Practitioner Summary: This research has the potential to support decision-makers by developing a simulation tool that quantifies the impact of varying operational and design-policies in terms of biomechanical-load and quality of care. The demonstrator-model reports: as geographical patient-bed distance, patient-acuity levels, and nurse-patient ratios increase, biomechanical-load reduces, and quality of care deteriorates.
- 23 August 2022
- Published by Taylor & Francis in Ergonomics
- Vol. 66 (7) , 886-903
Developing a simulation tool to quantify biomechanical load and quality of care in nursing
Nursing is a high musculoskeletal disorder (MSD) risk job with high workload demands. This study combines Digital Human Modelling (DHM) and Discrete Event Simulation (DES) to address the need for tools to better manage MSD risk. This novel approach quantifies physical-workload, work-performance, and quality-of-care, in response to varying geographical patient-bed assignments, patient-acuity levels, and nurse-patient ratios. Lumbar loads for 86 care-delivery tasks in an acute care hospital unit were used as inputs in a DES model of the care-delivery process, creating a shift-long time trace of the biomechanical load. Peak L4/L5 compression and moment were 3574 N and 111.58 Nm, respectively. This study reports trade-offs in all three experiments: (i) increasing geographical patient-bed assignment distance decreased L4/L5 compression (8.8%); (ii) increased patient-acuity decreased L4/L5 moment (4%); (iii) Increased nurse-patient ratio decreased L4/L5 compression (10%) and moment (17%). However, in all experiments, Quality of care indicators deteriorated (20, 19, and 29%, respectively). Practitioner Summary: This research has the potential to support decision-makers by developing a simulation tool that quantifies the impact of varying operational and design-policies in terms of biomechanical-load and quality of care. The demonstrator-model reports: as geographical patient-bed distance, patient-acuity levels, and nurse-patient ratios increase, biomechanical-load reduces, and quality of care deteriorates.
- 1 December 2021
- Published by Elsevier in Journal of Cleaner Production
- Vol. 328, 129513
Work environment in the context of corporate social responsibility reporting: Developing common terms for consistent reporting in organizations
- 1 December 2021
- Published by Elsevier in Journal of Cleaner Production
- Vol. 328, 129513
Work environment in the context of corporate social responsibility reporting: Developing common terms for consistent reporting in organizations
- 1 May 2021
- Published by Springer Nature
- p. 767-772
Exploring the Impact of COVID-19 on Nurse Workload and Quality of Care via Computerized Simulation
- 1 May 2021
- Published by Springer Nature
- p. 767-772
Exploring the Impact of COVID-19 on Nurse Workload and Quality of Care via Computerized Simulation
- 9 September 2019
- Published by Taylor & Francis in Ergonomics
- Vol. 62 (10) , 1254-1272
Assessing human factors and ergonomics capability in organisations – the Human Factors Integration Toolset
This paper presents the development of a tool that allows an organization to assess its level of human factors (HF) and ergonomics integration and maturity within the organization. The Human Factors Integration Toolset (available at: https://www.researchgate.net/project/Human-Factors-Integration-Toolset) has been developed and validated through a series of workshops with 45 participants from industry and academia and through industry partnered field-testing. HF maturity is assessed across five levels in 16 organizational functions based on any of 31 discrete elements contributing to HF. Summing element scores in a function determines a percent of ideal HF for the function. Industry stakeholders engaged in field-testing found the tool helped to establish the status of HF in the organization, plan projects to further develop HF capabilities, and initiate discussions on HF for performance and well-being. Improvement suggestions included adding an IT function, refining the language for non-HF specialists, including knowledge work, and creating a digital version to improve usability. Practitioner Summary: A tool scoring HF capability in 16 organization functions has been developed collaboratively. Industry stakeholders expressed a need for the tool and provided validation of tool design decisions. Field-testing improved tool usability and showed that, beyond scoring HF capability, the tool created opportunities for discussions of HF-related improvement possibilities.
- 9 September 2019
- Published by Taylor & Francis in Ergonomics
- Vol. 62 (10) , 1254-1272
Assessing human factors and ergonomics capability in organisations – the Human Factors Integration Toolset
This paper presents the development of a tool that allows an organization to assess its level of human factors (HF) and ergonomics integration and maturity within the organization. The Human Factors Integration Toolset (available at: https://www.researchgate.net/project/Human-Factors-Integration-Toolset) has been developed and validated through a series of workshops with 45 participants from industry and academia and through industry partnered field-testing. HF maturity is assessed across five levels in 16 organizational functions based on any of 31 discrete elements contributing to HF. Summing element scores in a function determines a percent of ideal HF for the function. Industry stakeholders engaged in field-testing found the tool helped to establish the status of HF in the organization, plan projects to further develop HF capabilities, and initiate discussions on HF for performance and well-being. Improvement suggestions included adding an IT function, refining the language for non-HF specialists, including knowledge work, and creating a digital version to improve usability. Practitioner Summary: A tool scoring HF capability in 16 organization functions has been developed collaboratively. Industry stakeholders expressed a need for the tool and provided validation of tool design decisions. Field-testing improved tool usability and showed that, beyond scoring HF capability, the tool created opportunities for discussions of HF-related improvement possibilities.