Martin Vehse
Research Subjects
Research Interests
Martin Vehse has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Carsten Agert
German Aerospace Center (DLR), Institute of Networked Energy Systems 1 , Carl-von-Ossietzky-Straße 15, Oldenburg 26129, Germany
6 shared publications - Karsten von Maydell
German Aerospace Center (DLR), Institute of Networked Energy Systems, Carl-von-Ossietzky-Str. 15, 26129 Oldenburg, Germany
5 shared publications Martin Theuring
3 shared publicationsStefan Geißendörfer
2 shared publications- Volker Steenhoff
NEXT ENERGY · EWE Research Centre for Energy Technology at the University of Oldenburg, Carl von Ossietzky-Str. 15, 26129 Oldenburg, Germany
2 shared publications Benedikt Schumacher
NEXT ENERGY, EWE Research Center for Energy Technology at Carl von Ossietzky University, 26129 Oldenburg, Germany
1 shared publication
Latest Publications
- 26 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 8 (1) , 3-7
Ultrathin Resonant-Cavity-Enhanced Amorphous Germanium Solar Cells on ZnO Honeycomb Electrodes
Ultrathin resonant-cavity-enhanced solar cells based on less than 30 nm thick hydrogenated amorphous germanium (a-Ge:H) absorbers have the potential to replace standard micrometer-thick microcrystalline silicon absorbers in silicon thin-film solar cell technology, as they yield comparable infrared absorption. Combined with the concept of a folded solar cell on a three-dimensional structured ZnO honeycomb electrode, grown in a cost-effective scalable electrochemical process, the strong absorption of this ultrathin type of cell can be even further enhanced. Our results show an increase of 11% in the short-circuit current density of an a-Ge:H solar cell on a honeycomb electrode compared to a flat reference cell, with no detrimental effects in the electrical properties. The benefit in the optical performance is mainly related to a broadband increase in the quantum efficiency due to an increased absorber volume as well as suppressed interferences inside the front electrode. At the same time, the desired resonances inside the resonant-cavity-enhanced solar cell itself are maintained.
- 26 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 8 (1) , 3-7
Ultrathin Resonant-Cavity-Enhanced Amorphous Germanium Solar Cells on ZnO Honeycomb Electrodes
Ultrathin resonant-cavity-enhanced solar cells based on less than 30 nm thick hydrogenated amorphous germanium (a-Ge:H) absorbers have the potential to replace standard micrometer-thick microcrystalline silicon absorbers in silicon thin-film solar cell technology, as they yield comparable infrared absorption. Combined with the concept of a folded solar cell on a three-dimensional structured ZnO honeycomb electrode, grown in a cost-effective scalable electrochemical process, the strong absorption of this ultrathin type of cell can be even further enhanced. Our results show an increase of 11% in the short-circuit current density of an a-Ge:H solar cell on a honeycomb electrode compared to a flat reference cell, with no detrimental effects in the electrical properties. The benefit in the optical performance is mainly related to a broadband increase in the quantum efficiency due to an increased absorber volume as well as suppressed interferences inside the front electrode. At the same time, the desired resonances inside the resonant-cavity-enhanced solar cell itself are maintained.
- 25 February 2015
- Published by Optica Publishing Group in Optics Express
- Vol. 23 (7) , A254-62
Laser perforated ultrathin metal films for transparent electrode applications
Transmittance and conductivity are the key requirements for transparent electrodes. Many optoelectronic applications require additional features such as mechanical flexibility and cost-efficient fabrication at low temperatures. Here we demonstrate a simple method to fabricate high performance transparent electrodes that is based on perforation of thin silver layers using picosecond laser pulses. Transparent electrodes have been characterized optically and electrically in order to determine the influence of specific surface coverage. Special attention was paid to maintaining sufficient conductivity in the metal-free areas. As a result, transmittance of a much higher bandwidth was achieved as compared to unpatterned metal films. Transparent electrodes have been fabricated on glass and plastic foil, as well as wafer-based silicon heterojunction solar cells, demonstrating their applicability for most relevant cases.
- 25 February 2015
- Published by Optica Publishing Group in Optics Express
- Vol. 23 (7) , A254-62
Laser perforated ultrathin metal films for transparent electrode applications
Transmittance and conductivity are the key requirements for transparent electrodes. Many optoelectronic applications require additional features such as mechanical flexibility and cost-efficient fabrication at low temperatures. Here we demonstrate a simple method to fabricate high performance transparent electrodes that is based on perforation of thin silver layers using picosecond laser pulses. Transparent electrodes have been characterized optically and electrically in order to determine the influence of specific surface coverage. Special attention was paid to maintaining sufficient conductivity in the metal-free areas. As a result, transmittance of a much higher bandwidth was achieved as compared to unpatterned metal films. Transparent electrodes have been fabricated on glass and plastic foil, as well as wafer-based silicon heterojunction solar cells, demonstrating their applicability for most relevant cases.
- 15 January 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 5 (2) , 479-486
Optimizing Folded Silicon Thin-Film Solar Cells on ZnO Honeycomb Electrodes
A promising approach for low-cost nanostructured thin-film solar cells with enhanced absorption is the fabrication of zinc oxide (ZnO) honeycomb electrodes in a combined bottom-up process of nanosphere lithography and electrochemical deposition. To optimize the honeycomb structures, we investigate thin hydrogenated amorphous silicon (a-Si:H) solar cells (with 100 nm absorber thickness) on honeycomb electrodes with different periodicities in optical and electrical simulations; whereas the electrical performance is not significantly affected with changing periodicity, the short-circuit current density is reduced for increasing honeycomb diameter due to increased parasitic absorption of the electrochemically deposited ZnO. Furthermore, we demonstrate that for micromorph tandem solar cells with an intrinsic layer thickness of hydrogenated microcrystalline silicon (μc-Si:H) of >500 nm, a focusing effect occurs, which leads to a strong enhancement in the quantum efficiency in the microcrystalline bottom solar cell.
- 15 January 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 5 (2) , 479-486
Optimizing Folded Silicon Thin-Film Solar Cells on ZnO Honeycomb Electrodes
A promising approach for low-cost nanostructured thin-film solar cells with enhanced absorption is the fabrication of zinc oxide (ZnO) honeycomb electrodes in a combined bottom-up process of nanosphere lithography and electrochemical deposition. To optimize the honeycomb structures, we investigate thin hydrogenated amorphous silicon (a-Si:H) solar cells (with 100 nm absorber thickness) on honeycomb electrodes with different periodicities in optical and electrical simulations; whereas the electrical performance is not significantly affected with changing periodicity, the short-circuit current density is reduced for increasing honeycomb diameter due to increased parasitic absorption of the electrochemically deposited ZnO. Furthermore, we demonstrate that for micromorph tandem solar cells with an intrinsic layer thickness of hydrogenated microcrystalline silicon (μc-Si:H) of >500 nm, a focusing effect occurs, which leads to a strong enhancement in the quantum efficiency in the microcrystalline bottom solar cell.
- 25 November 2014
- Published by Wiley in Advanced Optical Materials
- Vol. 3 (2) , 182-186
Ultrathin Resonant‐Cavity‐Enhanced Solar Cells with Amorphous Germanium Absorbers
- 25 November 2014
- Published by Wiley in Advanced Optical Materials
- Vol. 3 (2) , 182-186
Ultrathin Resonant‐Cavity‐Enhanced Solar Cells with Amorphous Germanium Absorbers
- 25 May 2012
- Published by Springer Nature in MRS Proceedings
- Vol. 1426, 111-116
Investigation on Nanorod TCO Light-trapping for a-Si:H Solar Cells in Superstrate Configuration
- 25 May 2012
- Published by Springer Nature in MRS Proceedings
- Vol. 1426, 111-116
Investigation on Nanorod TCO Light-trapping for a-Si:H Solar Cells in Superstrate Configuration
- 16 May 2012
- Published by Springer Nature in MRS Proceedings
- Vol. 1426, 93-98
Highly Transparent AZO/Ag/AZO Multilayer Front Contact for n-i-p Silicon Thin-Film Solar Cells
- 16 May 2012
- Published by Springer Nature in MRS Proceedings
- Vol. 1426, 93-98
Highly Transparent AZO/Ag/AZO Multilayer Front Contact for n-i-p Silicon Thin-Film Solar Cells