GNGodlief Frederick Neonufa

Godlief Frederick Neonufa

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Godlief Frederick Neonufa has a total of 31 co-authors. Here are the top co-authors by number of shared publications:

  • Meiti Pratiwi

    Department of Bioenergy Engineering and Chemurgy, Faculty of Industrial Technology, Institut Teknologi Bandung, Jatinangor, Sumedang 45363, Indonesia 3Department of Food Engineering, Faculty of Industrial Technology, Institut Teknologi Bandung, Jatinangor, Sumedang 45363

    3 shared publications
  • Endar Puspawiningtiyas

    Department of Chemical Engineering, Universitas Muhammadiyah Purwokerto, Jalan KH. Ahmad Dahlan, Dusun III, Kab. Banyumas, Jawa Tengah 53182

    2 shared publications
  • M Pratiwi

    Department of Chemical Engineering, Institut Teknologi Bandung, West Java, Indonesia

    2 shared publications
  • R Purwadi

    Department of Chemical Engineering, Institut Teknologi Bandung, West Java, Indonesia

    2 shared publications
  • Ronny Purwadi

    Department of Food Engineering, Faculty of Industrial Technology, Institut Teknologi Bandung, Jatinangor, Sumedang 45363

    2 shared publications
  • Tirto Prakoso

    Department of Chemical Engineering, Fakultas Teknologi Industi, Institut Teknologi Bandung, Bandung, 40116, Indonesia

    2 shared publications

Latest Publications

  • Open Access

    Improving the Environmental Performance of Palm Biodiesel via AgNO₃-Assisted Removal of Polyunsaturated Fatty Acids

    by Zuchra Helwani, Ida Zahrina, Said Zul Amraini, Rinaldi Idroes, Godlief Frederick Neonufa, Sunarti Abd Rahman

    Indonesian biodiesel products commonly exhibit low oxidative stability and high cloud points, which limit their performance and widespread use. These drawbacks are primarily due to the high content of polyunsaturated fatty acids (PUFAs) in the fatty acid methyl ester (FAME) mixture that constitutes biodiesel. A more suitable biodiesel composition includes higher proportions of saturated and monounsaturated fatty acids, which offer better combustion properties, higher cetane numbers, and greater resistance to oxidative degradation. In contrast, PUFAs promote oxidation reactions, resulting in fuel instability, increased sludge formation, and higher emissions of unburned hydrocarbons, negatively impacting both engine performance and the environment.This study investigates the use of silver nitrate (AgNO₃) as a selective extraction agent to remove PUFAs from palm oil-derived FAME. The goal is to identify the most effective biodiesel-to-AgNO₃ volume ratio for separating saturated fatty acid fractions from unsaturated ones, in order to produce a more stable and environmentally friendly biodiesel. Experimental results show that a 1:2 volume ratio significantly reduces the iodine number, from 57.22 to 47.38 g I₂/100 g sample, indicating a decrease in unsaturated compounds. Furthermore, oxidative stability improved from 11.18 hours to 11.69 hours after extraction. The removal of PUFAs not only improves the fuel's storage and combustion stability but also enhances its environmental profile. More stable biodiesel burns more completely, reducing emissions of particulate matter and greenhouse gases, and contributing to cleaner air and lower environmental impact. Thus, PUFA extraction using AgNO₃ presents a promising approach for improving the sustainability and performance of palm-based biodiesel fuels.


  • Characterization of antioxidant activity forest honey enriched with red ginger extract (Zingiber officinale var. Rubrum)

    by Mery Rambu B. Djoru, Gabriela E. Hetharia, I. D. A. R. R. Adi, G. F. Neonufa, Arista M. Tamonob, Ronny Purwadi

    Purpose of this research is to determine the characterization of antioxidant activity forest honey enriched with the red ginger extract on its physicochemical c

  • Comparison of Liquid Product Characteristics of PFAD Metal Soap Decarboxylation by Batch and Continuous Process

    by Godlief F. Neonufa, Lidya Elizabeth, Endar Puspawiningtiyas, Meiti Pratiwi, Astri Nur Istyami, Ronny Purwadi, Tatang H. Soerawidjaja

    Well-run continuous processes will benefit the industrial world in the future. This paper investigated the effect of batch and continuous processes on metal basic soap decarboxylation in terms of the liquid product characteristics. The metal soap used in the process was made from palm fatty acid distillate (PFAD) reacted with mixed metal oxides of Zn, Mg, and Ca. While the batch decarboxylation was carried out in a batch reactor at 400 degrees C for 5 hours, the continuous decarboxylation was conducted at 400 degrees C with a feed flow rate of 3.75 gr/minutes. Theoretically, the yield of batch decarboxylation is 76.6 wt% while the yield of continuous decarboxylation is 73.37 wt%. The liquid product was fractionated to separate short-chain hydrocarbon of C7-C10 (gasoline fractions) from medium- to long-chain hydrocarbons, or greater than C11 (green diesel fraction). The result showed that the alkane content from the batch process was higher than from the continuous process, whereas the continuous process produced more ketone products compared to the batch process. Furthermore, the GC-FID analysis showed a similar amount of total hydrocarbon (alkane, iso-alkane, and alkene) in both the batch and the continuous process.


  • Open Access

    Biohydrocarbon production for jet fuel from palm oil derivative products

    by G F Neonufa, M Pratiwi, E Puspawiningtiyas, R Purwadi, L Elizabeth

    Jet biofuel can be produced from vegetable oils and fats that are rich in lauric acid and myristic acid. Palm kernel oil is known to contain 47.8% lauric acid and 16.3% myristic acid. Jet biofuel production by the thermochemical method through decarboxylation of basic soap made from palm kernel oil has been extensively investigated. The objective of this study was to produce jet biofuel from basic soap made from palm kernel oil. Several metal compounds from the acetate group were selected for use in making basic soap. Decarboxylation of soap was carried out at 350°C and atmospheric pressure for 5 hours in the semi-batch reactor. Zinc metal enhances the yield of jet biofuel after decarboxylation of soap. Approximately 40 and 62 weight% of the jets biofuel had been obtained in this experiment.


  • Investigation of Ca/Mg/Zn Metals Mixing Ratio for Production of Soap with High Alkali Content

    by Godlief F Neonufa, Meiti Pratiwi, Astri Nur Istyami, Endar Puspawiningtiyas, Lidya Elizabeth, Ronny Purwadi, Ciwaruga The State Polytechnic Of Bandung

  • Open Access

    Production and Characterization of The Basic Soaps Obtained by Double Decomposition and Direct Process of Palm Stearin Oils

    by G F Neonufa, M Pratiwi, R Purwadi, T Prakoso, T H Soerawidjaja, L Elizabeth

    The direct and double decomposition process of palm stearin oil were evaluated for the production of basic soaps as a decarboxylation feedstock to drop-in fuel produce. The metals proposed for the saponification reaction was magnesium which has a high-basicity and is a low-cost metal. The Fourier transform infrared spectroscopy profile of the Mg(OH)–stearin basic soaps obtained by both direct and double decomposition processes showed hydrocarbon groups such as alkanes and alkene, without the oxygenate groups. The basic soap products generated by the double decomposition process showed better basicity level which was determined based on the IR spectrum intensity, especially of the -OH group. The type of saponification process used in the resulted basic soaps can provide a different effect on the generated basic soaps characteristic.


  • Open Access

    Catalytic thermal decarboxylation of palm kernel oil basic soap into drop-in fuel

    by Godlief Neonufa, Meiti Pratiwi, Tirto Prakoso, Ronny Purwadi, Tatang Soerawidjaja

    Catalytic thermal decarboxylation of basic soaps derived from palm kernel oil to produce dropin fuel was investigated. The C12/14 and C12/16 methyl ester had been used as the model compounds of this study. The purpose of this study was to produce drop-in fuel, especially jets biofuel, by catalytic thermal decarboxylation of basic soaps from palm kernel oils. In this study, two types of Magnesium-Zinc metal combination were used for preparing the basic soaps, both directly have a role as a catalyst. The reaction was carried out at 370°C and atmospheric pressure for 3 hours in the semi-batch reactor. Approximately 41 and 43 weight% of the yield and selectivity of about 97 and 98% toward the jets biofuel had been obtained in both experiments, respectively. The results showed that decarboxylation of basic soaps of C12/14 and C12/16 methyl ester were converted into drop-in fuel, especially jets biofuel in the relatively good yield of conversion.


  • An innovative technique to suppress alkene-bond in green diesel by Mg–Fe basic soap thermal decarboxylation

    by Godlief F. Neonufa, Tatang Hernas Soerawidjaja, Antonius Indarto, Tirto Prakoso

    The catalytic effect of magnesium and magnesium–zinc or copper(II), iron(III), aluminium(III), chromium(III) metal combination on ratio of the alkane to 1-alkenes and carbon number distribution in the green diesel product from metal basic soaps’ decarboxylation has been studied. Palm stearin was chosen as a model compound to produce metal basic soaps. Batch decarboxylation of metal basic soap was conducted at 350°C and atmospheric pressure for 3 h. Ratio of alkane to 1-alkene at the green diesel product was found following this order: Mg–Fe (14.6%) > Mg–Al (11.8%) > Mg–Cu (10.1%) > Mg–Zn (4.7%) > Mg–Cr (3.1%) > Mg (2.9%). Mg–Fe metal combination was preferable because it has high selectivity to alkane and capable of suppressing the 1-alkane formation during the metal basic soap decarboxylation process.