Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Sangkyu Lee has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Damage-free dry transfer method using stress engineering for high-performance flexible two- and three-dimensional electronics

    by Yoonsoo Shin, Seungki Hong, Yong Chan Hur, Chanhyuk Lim, Kyungsik Do, Ji Hoon Kim, Dae-Hyeong Kim, Sangkyu Lee

    Advanced transfer printing technologies have enabled the fabrication of high-performance flexible and stretchable devices, revolutionizing many research fields including soft electronics, optoelectronics, bioelectronics and energy devices. Despite previous innovations, challenges remain, such as safety concerns due to toxic chemicals, the expensive equipment, film damage during the transfer process and difficulty in high-temperature processing. Thus a new transfer printing process is needed for the commercialization of high-performance soft electronic devices. Here we propose a damage-free dry transfer printing strategy based on stress control of the deposited thin films. First, stress-controlled metal bilayer films are deposited using direct current magnetron sputtering. Subsequently, mechanical bending is applied to facilitate the release of the metal bilayer by increasing the overall stress. Experimental and simulation studies elucidate the stress evolution mechanisms during the processes. By using this method, we successfully transfer metal thin films and high-temperature-treated oxide thin films onto flexible or stretchable substrates, enabling the fabrication of two-dimensional flexible electronic devices and three-dimensional multifunctional devices.


  • Top Cited Papers
    Open Access

    Low-impedance tissue-device interface using homogeneously conductive hydrogels chemically bonded to stretchable bioelectronics

    by Yoonsoo Shin, Hyun Su Lee, Yongseok Joseph Hong, Sung-Hyuk Sunwoo, Ok Kyu Park, Sueng Hong Choi, Dae-Hyeong Kim, Sangkyu Lee

    Stretchable bioelectronics has notably contributed to the advancement of continuous health monitoring and point-of-care type health care. However, microscale nonconformal contact and locally dehydrated interface limit performance, especially in dynamic environments. Therefore, hydrogels can be a promising interfacial material for the stretchable bioelectronics due to their unique advantages including tissue-like softness, water-rich property, and biocompatibility. However, there are still practical challenges in terms of their electrical performance, material homogeneity, and monolithic integration with stretchable devices. Here, we report the synthesis of a homogeneously conductive polyacrylamide hydrogel with an exceptionally low impedance (~21 ohms) and a reasonably high conductivity (~24 S/cm) by incorporating polyaniline-decorated poly(3,4-ethylenedioxythiophene:polystyrene). We also establish robust adhesion (interfacial toughness: ~296.7 J/m 2 ) and reliable integration between the conductive hydrogel and the stretchable device through on-device polymerization as well as covalent and hydrogen bonding. These strategies enable the fabrication of a stretchable multichannel sensor array for the high-quality on-skin impedance and pH measurements under in vitro and in vivo circumstances.


  • Phase controlled Fe2N@Fe3O4 core-shell nanoparticles hybridized with nitrogen-doped reduced graphene oxide for boosted charge transfer in asymmetric supercapacitor

    by Jaemin Lee, Tae Seob Lim, Seung Geun Jo, Seokhyeon Jeong, Hyun-Jong Paik, Il Woo Ock, Sangkyu Lee, Ki Jun Yu, Jung Woo Lee


  • Top Cited Papers
    Open Access

    Tissue-like skin-device interface for wearable bioelectronics by using ultrasoft, mass-permeable, and low-impedance hydrogels

    by Chanhyuk Lim, Yongseok Joseph Hong, Jaebong Jung, Yoonsoo Shin, Sung-Hyuk Sunwoo, Seungmin Baik, Ok Kyu Park, Sueng Hong Choi, Taeghwan Hyeon, Ji Hoon Kim, et al.

    A tissue-like skin-device interface was prepared by using ultrathin functionalized hydrogels for wearable bioelectronics.


  • A Facile Fabrication and Transfer Method of Vertically Aligned Carbon Nanotubes on a Mo/Ni Bilayer for Wearable Energy Devices

    by Chanhyuk Lim, Yoonsoo Shin, Seungki Hong, Sangkyu Lee, Dae‐Hyeong Kim

    Carbon nanotubes are a promising material for flexible/wearable electrochemical device due to their mechanical softness, chemical stability, and high conductivity. Furthermore, the vertically aligned form of carbon nanotubes (VACNTs) have a large surface area due to their unique three‐dimensional (3D) nanostructure. Thus, VACNTs are particularly useful for wearable electrochemical sensors and/or energy devices. However, VACNTs are generally grown via a high‐temperature chemical vapor deposition process, which requires a rigid substrate. As a flexible/wearable device platform, therefore, VACNTs should be transferred from rigid substrates to soft substrates. Here, a facile fabrication and transfer method of a unique 3D nanostructure, that is, VACNTs on the Mo/Ni bilayer, for high performance flexible/wearable devices is reported. After growth of VACNTs on a Mo/Ni bilayer, VACNTs with the Mo/Ni bilayer can be easily peeled‐off from the SiO2 wafer by using weak adhesion of Ni to SiO2 for transfer printing onto polymeric/elastomeric substrates. Moreover, the Mo layer helps facile growth of VACNTs, and the Mo/Ni bilayer underneath VACNTs maximizes the lateral current flow. The proposed 3D nanostructure (VACNTs on the Mo/Ni bilayer) is successfully applied as flexible electrodes for high‐performance wearable asymmetric supercapacitors.


  • Materials and Design Strategies of Stretchable Electrodes for Electronic Skin and its Applications

    by Seungki Hong, Sangkyu Lee, Dae-Hyeong Kim

    The human skin is an essential organ of the human body for sensing various changes in the external environment, including pressure, temperature, and humidity, as well as for interacting with the outside world. Therefore, in the field of soft electronics, the development of the electronic skin (e-skin) that mimics the functions and properties of the human skin is an important research topic. The potential applications of the e-skin technology include wearable electronics, soft robotics, human-machine interfaces (HMIs), and prosthetic devices. Toward such research goals, various technologies are required. Among these, the stretchable electrode technology is a key component for achieving soft, stretchable e-skin and its applications. Therefore, various materials and design strategies for stretchable electrodes have been developed by many research groups. The successful development of stretchable electrodes has resulted in the rapid progress of high-performance stretchable device components such as stretchable sensors and actuators. Moreover, the integration of these device components with stretchable interconnects has yielded an integrated e-skin system, through which interactive human-machine interfacing can be achieved. This paper presents an overview of state-of-the-art technological advances in materials and design strategies for the development of stretchable electrodes. In addition, e-skin systems and their HMI applications based on such stretchable electrodes are briefly reviewed.


  • Open Access

    Stretchable conductive nanocomposite based on alginate hydrogel and silver nanowires for wearable electronics

    by Chanhyuk Lim, Yoonsoo Shin, Jaebong Jung, Ji Hoon Kim, Sangkyu Lee, Dae-Hyeong Kim

    Wearable electronic devices are used to perform various electronic functions on the human skin, and their mechanical softness while maintaining high performances is critical. Therefore, there is a need to develop novel materials with outstanding softness and high electrical and ionic conductivity for wearable electronics. Here, we present an intrinsically stretchable and conductive nanocomposite based on alginate hydrogels and silver nanowires (AgNWs). The developed nanocomposite was applied to highly conductive soft electrodes that can be used in various wearable electronic devices. The nanocomposite electrode was prepared by cross-linking alginate molecules in the presence of AgNWs, exhibiting higher electrical, ionic conductivity, higher stretchability, and lower modulus than conventional conducting rubbers. By forming a bilayer structure with the nanocomposite and the ultrasoft hydrogel layer, the mechanical properties of the nanocomposite device could be matched to that of the human skin. We used the nanocomposite electrode for fabricating key device components of wearable electronics, such as a wearable antenna and a skin-mountable supercapacitor. Such demonstrations successfully proved the effectiveness of the proposed nanocomposite as a soft conducting material for wearable electronics.


  • Stretchable Electrode Based on Laterally Combed Carbon Nanotubes for Wearable Energy Harvesting and Storage Devices

    by Seungki Hong, Jongsu Lee, Kyungsik Do, Minbaek Lee, Ji Hoon Kim, Sangkyu Lee, Dae‐Hyeong Kim

    Carbon nanotubes (CNTs) are a promising material for use as a flexible electrode in wearable energy devices due to their electrical conductivity, soft mechanical properties, electrochemical activity, and large surface area. However, their electrical resistance is higher than that of metals, and deformations such as stretching can lead to deterioration of electrical performances. To address these issues, here a novel stretchable electrode based on laterally combed CNT networks is presented. The increased percolation between combed CNTs provides a high electrical conductivity even under mechanical deformations. Additional nickel electroplating and serpentine electrode designs increase conductivity and deformability further. The resulting stretchable electrode exhibits an excellent sheet resistance, which is comparable to conventional metal film electrodes. The resistance change is minimal even when stretched by ≈100%. Such high conductivity and deformability in addition to intrinsic electrochemically active property of CNTs enable high performance stretchable energy harvesting (wireless charging coil and triboelectric generator) and storage (lithium ion battery and supercapacitor) devices. Monolithic integration of these devices forms a wearable energy supply system, successfully demonstrating its potential as a novel soft power supply module for wearable electronics.


  • Improvement in the volume efficiency of multilayered ceramic capacitors (MLCCs)

    by Kyung-Hoon Hyun, Sangkyu Lee, Chae-Woong Cho, Ungyu Paik, Dae-Hwan Kim, Eun-Sang Na, Jea-Gun Park