Myrna Staring
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Myrna Staring has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Kees Wapenaar
TU Delft
4 shared publications Cornelis Wapenaar
2 shared publicationsHuub Douma
2 shared publicationsJoost Van Der Neut
2 shared publicationsRoberto Pereira
2 shared publications- Evert Slob
Department of Geoscience and Engineering, Delft University of Technology, Delft, The Netherlands
1 shared publication
Latest Publications
- 5 February 2021
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 86 (2) , Q15-Q25
Robust estimation of primaries by sparse inversion and Marchenko equation-based workflow for multiple suppression in the case of a shallow water layer and a complex overburden: A 2D case study in the Arabian Gulf
Suppression of surface-related and internal multiples is an outstanding challenge in seismic data processing. The former is particularly difficult in shallow water, whereas the latter is problematic for targets buried under complex, highly scattering overburdens. We have developed a two-step, amplitude- and phase-preserving, inversion-based workflow that addresses these problems. We apply robust estimation of primaries by sparse inversion (R-EPSI) to solve simultaneously for the surface-related primaries Green’s function and the source wavelet. A significant advantage of the inversion approach of the R-EPSI method is that it does not rely on an adaptive subtraction step that typically limits other demultiple methods such as surface-related multiple elimination. The resulting Green’s function is used as the input to a Marchenko equation-based approach to predict the complex interference pattern of all overburden-generated internal multiples at once. In this approach, no a priori information about the subsurface is needed. In theory, the interbed multiples can be predicted with correct amplitude and phase and, again, no adaptive filters are required. We illustrate this workflow by applying it on an Arabian Gulf field data example. It is crucial that all preprocessing steps are performed in an amplitude-preserving way to restrict any impact on the accuracy of the multiple prediction. In practice, some minor inaccuracies in the processing flow may end up as prediction errors for which corrections will be needed. Hence, we conclude that the use of conservative adaptive filters were necessary to obtain the best results after interbed multiple removal. The obtained results indicate promising suppression of surface-related and interbed multiples.
- 5 February 2021
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 86 (2) , Q15-Q25
Robust estimation of primaries by sparse inversion and Marchenko equation-based workflow for multiple suppression in the case of a shallow water layer and a complex overburden: A 2D case study in the Arabian Gulf
Suppression of surface-related and internal multiples is an outstanding challenge in seismic data processing. The former is particularly difficult in shallow water, whereas the latter is problematic for targets buried under complex, highly scattering overburdens. We have developed a two-step, amplitude- and phase-preserving, inversion-based workflow that addresses these problems. We apply robust estimation of primaries by sparse inversion (R-EPSI) to solve simultaneously for the surface-related primaries Green’s function and the source wavelet. A significant advantage of the inversion approach of the R-EPSI method is that it does not rely on an adaptive subtraction step that typically limits other demultiple methods such as surface-related multiple elimination. The resulting Green’s function is used as the input to a Marchenko equation-based approach to predict the complex interference pattern of all overburden-generated internal multiples at once. In this approach, no a priori information about the subsurface is needed. In theory, the interbed multiples can be predicted with correct amplitude and phase and, again, no adaptive filters are required. We illustrate this workflow by applying it on an Arabian Gulf field data example. It is crucial that all preprocessing steps are performed in an amplitude-preserving way to restrict any impact on the accuracy of the multiple prediction. In practice, some minor inaccuracies in the processing flow may end up as prediction errors for which corrections will be needed. Hence, we conclude that the use of conservative adaptive filters were necessary to obtain the best results after interbed multiple removal. The obtained results indicate promising suppression of surface-related and interbed multiples.
- Open Access
- 4 May 2020
- Published by Wiley in Geophysical Prospecting
- Vol. 68 (6) , 1864-1877
Three‐dimensional Marchenko internal multiple attenuation on narrow azimuth streamer data of the Santos Basin, Brazil
In recent years, a variety of Marchenko methods for the attenuation of internal multiples has been developed. These methods have been extensively tested on two‐dimensional synthetic data and applied to two‐dimensional field data, but only little is known about their behaviour on three‐dimensional synthetic data and three‐dimensional field data. Particularly, it is not known whether Marchenko methods are sufficiently robust for sparse acquisition geometries that are found in practice. Therefore, we start by performing a series of synthetic tests to identify the key acquisition parameters and limitations that affect the result of three‐dimensional Marchenko internal multiple prediction and subtraction using an adaptive double‐focusing method. Based on these tests, we define an interpolation strategy and use it for the field data application. Starting from a wide azimuth dense grid of sources and receivers, a series of decimation tests are performed until a narrow azimuth streamer geometry remains. We evaluate the effect of the removal of sail lines, near offsets, far offsets and outer cables on the result of the adaptive double‐focusing method. These tests show that our method is most sensitive to the limited aperture in the crossline direction and the sail line spacing when applying it to synthetic narrow azimuth streamer data. The sail line spacing can be interpolated, but the aperture in the crossline direction is a limitation of the acquisition. Next, we apply the adaptive Marchenko double‐focusing method to the narrow azimuth streamer field data from the Santos Basin, Brazil. Internal multiples are predicted and adaptively subtracted, thereby improving the geological interpretation of the target area. These results imply that our adaptive double‐focusing method is sufficiently robust for the application to three‐dimensional field data, although the key acquisition parameters and limitations will naturally differ in other geological settings and for other types of acquisition.
- 4 May 2020
- Published by Wiley in Geophysical Prospecting
- Vol. 68 (6) , 1864-1877
Open AccessThree‐dimensional Marchenko internal multiple attenuation on narrow azimuth streamer data of the Santos Basin, Brazil
In recent years, a variety of Marchenko methods for the attenuation of internal multiples has been developed. These methods have been extensively tested on two‐dimensional synthetic data and applied to two‐dimensional field data, but only little is known about their behaviour on three‐dimensional synthetic data and three‐dimensional field data. Particularly, it is not known whether Marchenko methods are sufficiently robust for sparse acquisition geometries that are found in practice. Therefore, we start by performing a series of synthetic tests to identify the key acquisition parameters and limitations that affect the result of three‐dimensional Marchenko internal multiple prediction and subtraction using an adaptive double‐focusing method. Based on these tests, we define an interpolation strategy and use it for the field data application. Starting from a wide azimuth dense grid of sources and receivers, a series of decimation tests are performed until a narrow azimuth streamer geometry remains. We evaluate the effect of the removal of sail lines, near offsets, far offsets and outer cables on the result of the adaptive double‐focusing method. These tests show that our method is most sensitive to the limited aperture in the crossline direction and the sail line spacing when applying it to synthetic narrow azimuth streamer data. The sail line spacing can be interpolated, but the aperture in the crossline direction is a limitation of the acquisition. Next, we apply the adaptive Marchenko double‐focusing method to the narrow azimuth streamer field data from the Santos Basin, Brazil. Internal multiples are predicted and adaptively subtracted, thereby improving the geological interpretation of the target area. These results imply that our adaptive double‐focusing method is sufficiently robust for the application to three‐dimensional field data, although the key acquisition parameters and limitations will naturally differ in other geological settings and for other types of acquisition.
- 10 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computational Imaging
- Vol. 4 (1) , 160-171
Single- and Double-Sided Marchenko Imaging Conditions in Acoustic Media
In acoustic imaging, we deploy sources and receivers outside a volume to collect a multi-source, multi-offset reflection response in order to retrieve the internal reflectivity of that volume. It has been shown that Green's functions inside the volume can be retrieved by single-sided wavefield focusing of the acquired reflection data, using so-called focusing functions, which can be computed by solving a multidimensional Marchenko equation. Besides the reflection data, this methodology requires a background model of the propagation velocity. We present several imaging conditions to retrieve the internal reflectivity of an acoustic medium with correct amplitudes and without artifacts, using the Green's functions and focusing functions that are derived from the Marchenko equation. We distinguish three types of imaging: (1) imaging by deconvolution, (2) imaging by double focusing and (3) imaging by crosscorrelation. In all cases, reflectors can be approached either from above or from below. Imaging by deconvolution or double focusing requires single-sided illumination (meaning that sources and receivers are deployed at a single boundary above the volume only), whereas imaging by crosscorrelation requires double-sided illumination (meaning that sources and receivers are placed at two boundaries enclosing the volume). In order to achieve double-sided illumination, the required reflection response at the lower boundary can either be physically recorded or it can be retrieved from the reflection response at the upper boundary. When imaging by deconvolution or double focusing, the internal reflectivity is retrieved solely from primary reflections. When imaging by crosscorrelation, multiple reflections are focused at the image points, such that they contribute physically to the retrieved reflectivity values. This special feature can be beneficial for imaging weakly illuminated sections of strongly heterogeneous media.
- 10 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computational Imaging
- Vol. 4 (1) , 160-171
Single- and Double-Sided Marchenko Imaging Conditions in Acoustic Media
In acoustic imaging, we deploy sources and receivers outside a volume to collect a multi-source, multi-offset reflection response in order to retrieve the internal reflectivity of that volume. It has been shown that Green's functions inside the volume can be retrieved by single-sided wavefield focusing of the acquired reflection data, using so-called focusing functions, which can be computed by solving a multidimensional Marchenko equation. Besides the reflection data, this methodology requires a background model of the propagation velocity. We present several imaging conditions to retrieve the internal reflectivity of an acoustic medium with correct amplitudes and without artifacts, using the Green's functions and focusing functions that are derived from the Marchenko equation. We distinguish three types of imaging: (1) imaging by deconvolution, (2) imaging by double focusing and (3) imaging by crosscorrelation. In all cases, reflectors can be approached either from above or from below. Imaging by deconvolution or double focusing requires single-sided illumination (meaning that sources and receivers are deployed at a single boundary above the volume only), whereas imaging by crosscorrelation requires double-sided illumination (meaning that sources and receivers are placed at two boundaries enclosing the volume). In order to achieve double-sided illumination, the required reflection response at the lower boundary can either be physically recorded or it can be retrieved from the reflection response at the upper boundary. When imaging by deconvolution or double focusing, the internal reflectivity is retrieved solely from primary reflections. When imaging by crosscorrelation, multiple reflections are focused at the image points, such that they contribute physically to the retrieved reflectivity values. This special feature can be beneficial for imaging weakly illuminated sections of strongly heterogeneous media.
- 17 August 2017
- Published by Society of Exploration Geophysicists
- Vol. 1, 4808-4812
Adaptive double-focusing method for source-receiver Marchenko redatuming on field data
We present an adaptive double-focusing method for applying source-receiver Marchenko redatuming to field data. Receiver redatuming is achieved by a first focusing step, where the coupled Marchenko equations are iteratively solved for the oneway Green's functions. Next, source redatuming is typically performed by a multi-dimensional deconvolution of these Green's functions. Instead, we propose a second focusing step for source Marchenko redatuming, using the upgoing Green's function and the downgoing focusing function to obtain a redatumed reflection response in the physical medium. This method makes adaptive processing more straight-forward, making it less sensitive to imperfections in the data and the acquisition geometry and more suitable for the application to field data. In addition, it is cheaper and can be parallelized by pair of focal points. Presentation Date: Wednesday, September 27, 2017 Start Time: 4:20 PM Location: 370A Presentation Type: ORAL
- 17 August 2017
- Published by Society of Exploration Geophysicists
- Vol. 1, 4808-4812
Adaptive double-focusing method for source-receiver Marchenko redatuming on field data
We present an adaptive double-focusing method for applying source-receiver Marchenko redatuming to field data. Receiver redatuming is achieved by a first focusing step, where the coupled Marchenko equations are iteratively solved for the oneway Green's functions. Next, source redatuming is typically performed by a multi-dimensional deconvolution of these Green's functions. Instead, we propose a second focusing step for source Marchenko redatuming, using the upgoing Green's function and the downgoing focusing function to obtain a redatumed reflection response in the physical medium. This method makes adaptive processing more straight-forward, making it less sensitive to imperfections in the data and the acquisition geometry and more suitable for the application to field data. In addition, it is cheaper and can be parallelized by pair of focal points. Presentation Date: Wednesday, September 27, 2017 Start Time: 4:20 PM Location: 370A Presentation Type: ORAL
- 3 August 2017
- Published by Society of Exploration Geophysicists
- Vol. 1, 1323-1328
An adaptive method for source-receiver Marchenko redatuming
We propose an adaptive approach for the removal of internal multiples caused by an overburden using source-receiver Marchenko redatuming. Typically, a multidimensional deconvolution using the one-way Green's functions is performed to achieve redatuming, after these functions have been retrieved by solving the coupled Marchenko equations. However, this processing step is sensitive to imperfections in the data and the acquisition geometry as well as computationally expensive. We propose an adaptive redatuming method that is less sensitive to such imperfections and as such should be beneficial when attempting source-receiver Marchenko redatuming with field data. We show this using 2D synthetic data from the Santos basin offshore Brazil. As an added bonus, it is also computationally less expensive. A disadvantage of the proposed method is that the obtained reflection response exists in the physical medium, causing some interactions with the overburden to remain.
- 3 August 2017
- Published by Society of Exploration Geophysicists
- Vol. 1, 1323-1328
An adaptive method for source-receiver Marchenko redatuming
We propose an adaptive approach for the removal of internal multiples caused by an overburden using source-receiver Marchenko redatuming. Typically, a multidimensional deconvolution using the one-way Green's functions is performed to achieve redatuming, after these functions have been retrieved by solving the coupled Marchenko equations. However, this processing step is sensitive to imperfections in the data and the acquisition geometry as well as computationally expensive. We propose an adaptive redatuming method that is less sensitive to such imperfections and as such should be beneficial when attempting source-receiver Marchenko redatuming with field data. We show this using 2D synthetic data from the Santos basin offshore Brazil. As an added bonus, it is also computationally less expensive. A disadvantage of the proposed method is that the obtained reflection response exists in the physical medium, causing some interactions with the overburden to remain.
- 1 September 2016
- Published by Society of Exploration Geophysicists
- Vol. 1, 5172-5176
An interferometric interpretation of Marchenko redatuming including free-surface multiples
We present an interferometric interpretation of the iterative Marchenko scheme including both free-surface multiples and internal multiples. Cross-correlations are used to illustrate the combination of causal and acausal events that are essential for the process of multiple removal. The first 4 steps in the scheme are discussed in detail, where the effect of different contributions on the result is displayed and the formation of individual events is illustrated. We highlight the events that are necessary to understand the process that removes both internal multiples and free-surface multiples from the data. We demonstrate that additional contributions are needed to correct for the presence of free-surface multiples. Presentation Date: Monday, October 17, 2016 Start Time: 3:45:00 PM Location: 147/154 Presentation Type: ORAL
- 1 September 2016
- Published by Society of Exploration Geophysicists
- Vol. 1, 5172-5176
An interferometric interpretation of Marchenko redatuming including free-surface multiples
We present an interferometric interpretation of the iterative Marchenko scheme including both free-surface multiples and internal multiples. Cross-correlations are used to illustrate the combination of causal and acausal events that are essential for the process of multiple removal. The first 4 steps in the scheme are discussed in detail, where the effect of different contributions on the result is displayed and the formation of individual events is illustrated. We highlight the events that are necessary to understand the process that removes both internal multiples and free-surface multiples from the data. We demonstrate that additional contributions are needed to correct for the presence of free-surface multiples. Presentation Date: Monday, October 17, 2016 Start Time: 3:45:00 PM Location: 147/154 Presentation Type: ORAL