Amrinder Pal Singh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Amrinder Pal Singh has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Amandeep Singh Oberoi
Thapar Institute of Engineering and Technology
1 shared publication Anil Kumar
Department of Applied Sciences, University Institute of Engineering and Technology (UIET), Panjab University, Chandigarh, India
1 shared publication- Gurwinder Singh
Panjab University
1 shared publication - Harmesh Kumar
Panjab University
1 shared publication - Inderdeep Singh
Indian Institute of Technology Roorkee
1 shared publication Jatinder Kumar Goswamy
Department of Applied Sciences, University Institute of Engineering and Technology (UIET), Panjab University, Chandigarh, India
1 shared publication
Latest Publications
- 13 November 2017
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 52 (16) , 2179-2188
Improved mechanical performance of bisphenol-A graphene-oxide nano-composites
Epoxy resins have been extensively utilized for mechanical strength applications in the field of aerospace, automobiles, marine, defence, etc. Improving the strength as well as fracture behaviour of the light weight materials is challenging. Present work is an attempt to enhance elastic modulus, hardness and fracture resistance simultaneously by reinforcing the epoxy (bisphenol-A) matrix with a new-age two-dimensional atomically thin graphene oxide filler. Wet chemical oxidation method was used to prepare graphene oxide sheets. Morphological study of the synthesized graphene oxide was carried out using scanning electron microscopy. Fourier-transformed infrared, ultraviolet–visible and Raman spectroscopic techniques were also employed to ascertain the synthesis of graphene oxide. The results confirmed the synthesis of well oxidized graphene oxide sheets. The prepared graphene oxide sheets were then sonicated in acetone solution to ensure better dispersion in the bisphenol-A graphene oxide nano-composite using 0.25, 0.5, 1.0 and 1.5 wt.% graphene oxide reinforcement. Solution mixing method was used to synthesize the polymer nano-composite. Scanning electron microscopy results revealed the smooth dispersion of graphene oxide in the bisphenol-A matrix. Nano-indentation of the bisphenol-A graphene oxide nano-composite showed a considerable jump in elastic modulus at 1 wt.% and hardness at 0.50 wt.% of graphene oxide reinforcement. Fracture resistance of bisphenol-A graphene oxide composite as represented by ratio of elastic modulus to hardness was enhanced by 24% as compared to the pristine bisphenol-A. Our results demonstrate a promising way to improve the mechanical characteristics of epoxy resins through graphene oxide reinforcement at low weight percentages.
- 13 November 2017
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 52 (16) , 2179-2188
Improved mechanical performance of bisphenol-A graphene-oxide nano-composites
Epoxy resins have been extensively utilized for mechanical strength applications in the field of aerospace, automobiles, marine, defence, etc. Improving the strength as well as fracture behaviour of the light weight materials is challenging. Present work is an attempt to enhance elastic modulus, hardness and fracture resistance simultaneously by reinforcing the epoxy (bisphenol-A) matrix with a new-age two-dimensional atomically thin graphene oxide filler. Wet chemical oxidation method was used to prepare graphene oxide sheets. Morphological study of the synthesized graphene oxide was carried out using scanning electron microscopy. Fourier-transformed infrared, ultraviolet–visible and Raman spectroscopic techniques were also employed to ascertain the synthesis of graphene oxide. The results confirmed the synthesis of well oxidized graphene oxide sheets. The prepared graphene oxide sheets were then sonicated in acetone solution to ensure better dispersion in the bisphenol-A graphene oxide nano-composite using 0.25, 0.5, 1.0 and 1.5 wt.% graphene oxide reinforcement. Solution mixing method was used to synthesize the polymer nano-composite. Scanning electron microscopy results revealed the smooth dispersion of graphene oxide in the bisphenol-A matrix. Nano-indentation of the bisphenol-A graphene oxide nano-composite showed a considerable jump in elastic modulus at 1 wt.% and hardness at 0.50 wt.% of graphene oxide reinforcement. Fracture resistance of bisphenol-A graphene oxide composite as represented by ratio of elastic modulus to hardness was enhanced by 24% as compared to the pristine bisphenol-A. Our results demonstrate a promising way to improve the mechanical characteristics of epoxy resins through graphene oxide reinforcement at low weight percentages.
- 22 February 2016
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 231 (13) , 2396-2407
Optimal control of thrust force for delamination-free drilling in glass-fiber-reinforced plastic laminates
Damage due to delamination is an important issue during drilling in glass-fiber-reinforced plastic composite laminates. Feed-rate during drilling is the most critical parameter. High feed-rate during drilling results in high thrust force on the composite laminate. In this work, dynamics of drilling in glass-fiber-reinforced plastic composite laminates are captured in the form of third-order state-space model between thrust force and feed-rate. Optimal control is then used to control the thrust force generated during drilling. Research has revealed that there is a critical limit on thrust force during drilling in composite laminate below which no delamination occurs. This critical thrust force profile is used in this work as reference in the optimal controller to ensure delamination-free drilling. Present controller precisely tracks the given critical thrust force reference profile and gives optimal feed-rate profile. The glass-fiber-reinforced plastic composite laminate is then drilled at this optimal feed-rate profile to obtain delamination-free holes. Delamination around the holes is quantified in the form of a delamination factor. Experimental results show that the control strategy is efficient and effective in preventing drilling-induced delamination in glass-fiber-reinforced plastic composite laminates.
- 22 February 2016
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 231 (13) , 2396-2407
Optimal control of thrust force for delamination-free drilling in glass-fiber-reinforced plastic laminates
Damage due to delamination is an important issue during drilling in glass-fiber-reinforced plastic composite laminates. Feed-rate during drilling is the most critical parameter. High feed-rate during drilling results in high thrust force on the composite laminate. In this work, dynamics of drilling in glass-fiber-reinforced plastic composite laminates are captured in the form of third-order state-space model between thrust force and feed-rate. Optimal control is then used to control the thrust force generated during drilling. Research has revealed that there is a critical limit on thrust force during drilling in composite laminate below which no delamination occurs. This critical thrust force profile is used in this work as reference in the optimal controller to ensure delamination-free drilling. Present controller precisely tracks the given critical thrust force reference profile and gives optimal feed-rate profile. The glass-fiber-reinforced plastic composite laminate is then drilled at this optimal feed-rate profile to obtain delamination-free holes. Delamination around the holes is quantified in the form of a delamination factor. Experimental results show that the control strategy is efficient and effective in preventing drilling-induced delamination in glass-fiber-reinforced plastic composite laminates.