PTPham Ngoc Thao

Pham Ngoc Thao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pham Ngoc Thao has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fabrication and Characterization of PZT Fibered-Epitaxial Thin Film on Si for Piezoelectric Micromachined Ultrasound Transducer

    by Pham Ngoc Thao, Shinya Yoshida, Shuji Tanaka

    This paper presents a fibered-epitaxial lead zirconate titanate (PZT) thin film with intermediate features between the monocrystalline and polycrystalline thin films for piezoelectric micromachined ultrasound transducer (pMUT). The grain boundaries confirmed by scanning electron microscopy, but it still maintained the in-plane epitaxial relationship found by X-ray diffraction analyses. The dielectric constant (εr33 = 500) was relatively high compared to those of the monocrystalline thin films, but was lower than those of conventional polycrystalline thin films near the morphotropic phase boundary composition. The fundamental characterizations were evaluated through the operation tests of the prototyped pMUT with the fibered-epitaxial thin film. As a result, its piezoelectric coefficient without poling treatment was estimated to be e31,f = −10–−11 C/m2, and thus reasonably high compared to polycrystalline thin films. An appropriate poling treatment increased e31,f and decreased εr33. In addition, this unique film was demonstrated to be mechanically tougher than the monocrystalline thin film. It has the potential ability to become a well-balanced piezoelectric film with both high signal-to-noise ratio and mechanical toughness for pMUT.


  • Epitaxial growth of metallic buffer layer structure and c -axis oriented Pb(Mn 1/3 ,Nb 2/3 )O 3 –Pb(Zr,Ti)O 3 thin film on Si for high performance piezoelectric micromachined ultrasonic transducer

    by Pham Ngoc Thao, Shinya Yoshida, Shuji Tanaka

    This paper reports on the development of a metallic buffer layer structure, (100) SrRuO 3 (SRO)/(100) Pt/(100) Ir/(100) yttria-stabilized zirconia (YSZ) layers for the epitaxial growth of a c -axis oriented Pb(Mn 1/3 ,Nb 2/3 )O 3 –Pb(Zr,Ti)O 3 (PMnN–PZT) thin film on a (100) Si wafer for piezoelectric micro-electro mechanical systems (MEMS) application. The stacking layers were epitaxially grown on a Si substrate under the optimal deposition condition. A crack-free PMnN–PZT epitaxial thin films was obtained at a thickness up to at least 1.7 µm, which is enough for MEMS applications. The unimorph MEMS cantilevers based on the PMnN–PZT thin film were fabricated and characterized. As a result, the PMnN–PZT thin film exhibited −10 to −12 C/m 2 as a piezoelectric coefficient e 31,f and ∼250 as a dielectric constants ε r . The resultant FOM for piezoelectric micromachined ultrasonic transducer (pMUT) is higher than those of general PZT and AlN thin films. This structure has a potential to provide high-performance pMUTs.