MBMasaaki Baba

Masaaki Baba

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Masaaki Baba has a total of 69 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Physics-Informed Neural Networks for Speech Production

    by Kazuya Yokota, Ryosuke Harakawa, Masaaki Baba, Masahiro Iwahashi

    The analysis of speech production based on physical models of the vocal folds and vocal tract is essential for studies on vocal-fold behavior and linguistic research. This paper proposes a speech production analysis method using physics-informed neural networks (PINNs). The networks are trained directly on the governing equations of vocal-fold vibration and vocal-tract acoustics. Vocal-fold collisions introduce nondifferentiability and vanishing gradients, challenging phenomena for PINNs. We demonstrate, however, that introducing a differentiable approximation function enables the analysis of vocal-fold vibrations within the PINN framework. The period of self-excited vocal-fold vibration is generally unknown. We show that by treating the period as a learnable network parameter, a periodic solution can be obtained. Furthermore, by implementing the coupling between glottal flow and vocal-tract acoustics as a hard constraint, glottis-tract interaction is achieved without additional loss terms. We confirmed the method's validity through forward and inverse analyses, demonstrating that the glottal flow rate, vocal-fold vibratory state, and subglottal pressure can be simultaneously estimated from speech signals. Notably, the same network architecture can be applied to both forward and inverse analyses, highlighting the versatility of this approach. The proposed method inherits the advantages of PINNs, including mesh-free computation and the natural incorporation of nonlinearities, and thus holds promise for a wide range of applications.


  • Open Access

    Structural behaviors of lead zirconate titanate-based ferroelectric ceramics during pyroelectric-power generation cycles

    by Takuro Kawasaki, Tatsuo Fukuda, Satoru Yamanaka, Ichiro Murayama, Takanori Katou, Masaaki Baba, Hideki Hashimoto, Stefanus Harjo, Kazuya Aizawa, Hirohisa Tanaka, et al.

    Energy harvesting from waste heat can improve energy efficiency in society. This research investigated the structural behaviors of lead zirconate titanate–based ferroelectric ceramics using operando neutron diffraction measurements under the conditions of two energy-harvesting cycles that involve consideration of the temperature changes of automobile exhaust gas for achieving good harvesting efficiencies. Input and output electrical energies and neutron diffraction data were simultaneously collected. The obtained time-resolved neutron diffraction intensity data indicate that the applied electric fields and temperature changes induced 90° domain rotation and lattice strain. These structural changes and their variations depending on cycle conditions, such as temperature changes, applied electric fields, and circuit switching, provide insight into the origins of the differences in the behaviors of electrical input/output energies in the cycles.


  • Open Access

    Temperature-leveling performance comparison of solid–solid phase change materials for thermal management of electronic chips in thin devices

    by Masaaki Baba, Hiroaki Ishiharajima, Koki Ishisaka, Noboru Yamada, Masatoshi Takeda

    Thermal management using solid–solid phase change materials (PCMs) is gaining attention as a viable technology for improving the reliability of smart devices, such as smartphones and tablets. This technology relies on the latent heat of PCMs to level temperature fluctuations in electronic chips, does not require additional power, and can be miniaturized. The temperature-leveling performance of thermal management devices based on solid–solid PCMs depends on the thermophysical properties and thickness of the PCM and the generated heat density of the heat source. However, these factors complicate the comparison of PCM performances. Therefore, clarifying the relationship between these factors and temperature-leveling performance of solid–solid PCMs and defining a performance factor are necessary for material development. In this study, we defined an evaluation index of PCMs suitable for thin smart devices. The temperature-leveling performances of VO2 and NiTi alloys, which are typical inorganic solid–solid PCMs, were compared to define the performance factor. Thermal simulations were performed to define and calculate the optimum PCM thickness that maximized the temperature-leveling performance and cost-effectiveness under various heat densities generated by a heat source. We defined the maximum effective energy capacity (Eeff) as the temperature-leveling performance factor, calculated using the optimal thickness and volumetric latent heat. PCMs with high Eeff are promising for thin smart devices. The simulation results indicated that Eeff of NiTi was 1.46–1.50 times higher than that of VO2 owing to the high thermal conductivity of NiTi. The simulation and experimental results were compared to validate the proposed thermal simulation model.


  • Open Access

    Enhancement of a pyroelectric body energy harvesting scheme employing pulsed electric fields

    by Buddhika Amila Kumara Sodige, Hideto Furuno, Nguyen Chi Trung Ngo, Hironari Sugiyama, Masaaki Baba, Koichi Niihara, Tadachika Nakayama

    This research utilizes waste heat energy as a sustainable energy source to enhance pyroelectric power output by combining pyroelectric nanogenerators with an external pulsed electric field. When the surface temperature of the pyroelectric body varies, applying different pulses of the external electric field results in maximum power accumulation. A novel power-generating experimental setup was developed to measure and compute pyroelectric power generation. A standard Fuji ceramic C-9 sample was used to generate pyroelectric energy in a 20 °C temperature range from 120 to 140 °C. The continuous temperature variation frequency was 0.05 Hz, and the pulsed electric field was applied when the temperature rose. Pulses of the electric field with widths of 10, 50, 100, and 200 ms were applied to the sample under different pulse amplitudes, and the amplitude of each pulse was 250, 500, 1000, or 1500 V/mm. The maximum power generated through the application of an external pulsed electric field under the above-mentioned conditions was evaluated. This system had the highest power density of 0.204 mJ cm−2 °C−1 kV−1. In addition, for the lowest input power, the maximum power generation condition was a 10 ms pulse width and an amplitude of 250 V mm−1 in the applied electric field. This state might power smart sensor modules, IoT devices, automobiles, and other waste heat energy applications. Nano-pulse electric field applications may reduce input power to its lowest level, dependent on net-producing power. Therefore, new researchers can use net-generation power efficiency to create a large-scale power source using multiple pyroelectric arrays.

  • Open Access

    Improvement of Power Recovery by Applying a Multi-Pulse Electric Field in the Thermoelectric Cycle Power Generation Process with Pyroelectric Materials

    by Buddhika Amila Kumara Sodige, Hideto Furuno, Nguyen Chi Trung Ngo, Hironari Sugiyama, Masaaki Baba, Koichi Niihara, Tadachika Nakayama

    Nanogenerator energy harvesting technologies that transform thermal energies into electricity may help address the growing need for green power. Therefore, this research aims to increase power generation by combining waste heat with pyroelectric nanogenerators as a sustainable energy source. Under optimal conditions, an external multi-pulse electric field can be utilized to generate power using thermoelectric cycle power generation. The greatest power may be gathered by applying various pulses of the external electric field at temperature changes on the surface of the pyroelectric materials. To generate pyroelectric power, a C9 BZT sample was used, and the lowest temperature difference for accomplishing this was 20 °C, with all measurements made on a sample with a lower limit of 120 °C. The maximum generation density was 0.104 mJ/cm2°CkV for a pulse width of 10 ms and 20 pulses of a low voltage (250 V/mm) input electric field. A multi-pulse electric field with low input voltage increases the power generation performance ratio (η) with the pulse count. At the largest number of pulses, the greatest η value for 250 V/mm was 7.834. Finally, it was determined that the developed pyroelectric power generation system may be more effective if a low-voltage, multi-pulse electric field is used.


  • Enhancing low-grade waste heat recovery by lead-free ferroelectric Ba(Zr0.1Ti0.9)O3 with Sr and Ca isovalent dopants

    by Nguyen Chi Trung Ngo, Hironari Sugiyama, Buddhika Amila Kumara Sodige, Juan Paulo Wiff, Hideto Furuno, Satoru Yamanaka, Yoonho Kim, Tsuneo Suzuki, Masaaki Baba, Masatoshi Takeda, et al.


  • Open Access

    Demonstration of pyroelectric generation for self-powered wireless sensor nodes

    by Masaaki Baba, Kosei Nemoto, Chido Onuki, Toshiyuki Yamazawa, Shigeru Wakakuwa, Hirohisa Tanaka, Tohru Sekino, Tadachika Nakayama, Noboru Yamada, Masatoshi Takeda


  • Operando structure observation of pyroelectric ceramics during power generation cycle

    by Takuro Kawasaki, Tatsuo Fukuda, Satoru Yamanaka, Tomokazu Sakamoto, Ichiro Murayama, Takanori Katou, Masaaki Baba, Hideki Hashimoto, Stefanus Harjo, Kazuya Aizawa, et al.

    The microscopic origin of the pyroelectric power generation using ferroelectric ceramics for energy harvesting from time-varying waste heat can be understood by conducting operando neutron diffraction measurements. The behavior of the domain orientation and lattice strain in the lead zirconate titanate-based ceramics with a tetragonal structure during the novel power generation cycle combining the electric field and the temperature change were investigated. The [001] domains and the lattice strain of the (111) plane in the direction parallel to the electric field increase in the process of simultaneous rise in the electric field and temperature and rapidly decrease in the process of the field drop. Furthermore, larger structural changes were found in the material and cycle condition, giving higher power density. The alignment of the domain orientation by the electric field and its randomization by the higher temperature during the cycle are critical features of the current power generation system.


  • Pyroelectric power generation in PLZST material by temperature dependent phase transformation

    by Hironari Sugiyama, Juyoung Kim, Satoru Yamanaka, Yoonho Kim, Nguyen Chi Trung Ngo, Juan Paulo Wiff, Tsuneo Suzuki, Masaaki Baba, Masatoshi Takeda, Noboru Yamada, et al.