Juraj Glatz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Juraj Glatz has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Zuzana Kotianova
Department of Quality, Safety and Environment, Institute of Special Engineering Processologies, Faculty of Mechanical Engineering, Technical University of Kosice, Park Komenskeho 5, 040 01 Kosice-Sever, Slovakia
4 shared publications - Daniela Onofrejová
Tech Univ Kosice, Fac Mech Engn, Inst Special Engn Processol, Dept Safety & Prod Qual, Letna 9, Kosice 04200, Slovakia
3 shared publications - Hana Pačaiová
Department of Aviation Engineering, Faculty of Aeronautics, Technical University of Košice, Rampová 7, 041 21 Košice, Slovakia
3 shared publications - Juraj Sinay
Technical University of Košice
3 shared publications - Renáta Turisová
Department of Business Management and Economics, Institute of Industrial Engineering, Management and Applied Mathematics, Faculty of Mechanical Engineering, Technical University of Kosice, Letna 1/9, 042 00 Košice, Slovakia
3 shared publications - Marta Vargová
Technical University of Košice
2 shared publications
Latest Publications
- Open Access
- 29 April 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (9) , 3718
Sustainability Assessment of Machinery Safety in a Manufacturing Organization Using AHP and CART Methods
Machine safety is not only a prerequisite for successful production but also the foundation for the sustainability and growth of any manufacturing organization. The latest approaches in this rapidly developing field integrate effective risk management tools and strategies into occupational health and safety (OHS) management systems. The study, through a real example from practice, describes the use of the analytic hierarchy process (AHP) method for machine safety improvement, considering the possible types of losses. Classification and Regression Tree Analysis (CART) was applied to assess the efficiency, cost-effectiveness, and, therefore, the overall sustainability level of the relevant safety measures. These were proposed risk reduction measures that typically raised uncertainty among managers regarding the estimation of cost-effectiveness. The advantage of the application decision tree approach is the possibility to identify and establish relatively homogeneous groups of undesirable events and their impact on the organization’s objectives. A comprehensive model has been developed to support management decision making in manufacturing organizations towards implementing and improving safety measures in line with manufacturing sustainability goals.
- 29 April 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (9) , 3718
Open AccessSustainability Assessment of Machinery Safety in a Manufacturing Organization Using AHP and CART Methods
Machine safety is not only a prerequisite for successful production but also the foundation for the sustainability and growth of any manufacturing organization. The latest approaches in this rapidly developing field integrate effective risk management tools and strategies into occupational health and safety (OHS) management systems. The study, through a real example from practice, describes the use of the analytic hierarchy process (AHP) method for machine safety improvement, considering the possible types of losses. Classification and Regression Tree Analysis (CART) was applied to assess the efficiency, cost-effectiveness, and, therefore, the overall sustainability level of the relevant safety measures. These were proposed risk reduction measures that typically raised uncertainty among managers regarding the estimation of cost-effectiveness. The advantage of the application decision tree approach is the possibility to identify and establish relatively homogeneous groups of undesirable events and their impact on the organization’s objectives. A comprehensive model has been developed to support management decision making in manufacturing organizations towards implementing and improving safety measures in line with manufacturing sustainability goals.
- Open Access
- 14 March 2024
- Published by MDPI AG in Preprints.org
Sustainability Assessment of Machinery Safety in a Manufacturing Organisation – Supporting Machinery Safety Decision Making with AHP and CART Methods
Machine safety is not only a prerequisite for successful production, but also the foundation for sustainability and growth of any manufacturing organisation. The latest approaches in this rapidly developing field are the integration of effective risk management tools and strategies into occupational health and safety (OHS) systems. In this article, using a specific example from practice, we will show how using multi-criteria decision making (AHP) support Machinery Safety Decision Making (MSDM) from the point of reducing losses. Using Classification and Regression Tree Analysis (CART), we estimated the efficiency, cost-effectiveness and thus the sustainability level of the relevant safety measures. These were proposed risk reduction measures that typically raised uncertainty among managers regarding the estimation of cost-effectiveness. The advantage of application decision trees approach is possibility to identify and establish relatively homogeneous groups of undesirable events and their impact on the organisation's objectives. A comprehensive model has been developed to support management decision making in manufacturing organizations in implementing and improving safety measures in line with manufacturing sustainability goals.
- 14 March 2024
- Published by MDPI AG in Preprints.org
Open AccessSustainability Assessment of Machinery Safety in a Manufacturing Organisation – Supporting Machinery Safety Decision Making with AHP and CART Methods
Machine safety is not only a prerequisite for successful production, but also the foundation for sustainability and growth of any manufacturing organisation. The latest approaches in this rapidly developing field are the integration of effective risk management tools and strategies into occupational health and safety (OHS) systems. In this article, using a specific example from practice, we will show how using multi-criteria decision making (AHP) support Machinery Safety Decision Making (MSDM) from the point of reducing losses. Using Classification and Regression Tree Analysis (CART), we estimated the efficiency, cost-effectiveness and thus the sustainability level of the relevant safety measures. These were proposed risk reduction measures that typically raised uncertainty among managers regarding the estimation of cost-effectiveness. The advantage of application decision trees approach is possibility to identify and establish relatively homogeneous groups of undesirable events and their impact on the organisation's objectives. A comprehensive model has been developed to support management decision making in manufacturing organizations in implementing and improving safety measures in line with manufacturing sustainability goals.
- Open Access
- 1 April 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (7) , 3607
Ergonomic Assessment of Physical Load in Slovak Industry Using Wearable Technologies
The physical tasks of workers are demanding, particularly when performed long-term in unsuitable working position, with high frequency, heavy load, after injury, with developing damage of health or reduced performance due to advanced age. Work-related musculoskeletal disorders (WMSDs) result from overuse or develop over time. Work activities, which are frequent and repetitive, or activities with awkward postures, cause disorders that may be painful during work or at rest. There is a new technology in the market, occupational exoskeletons, which have the prerequisites for minimizing the negative consequences of workload on WMSDs. We provided pilot quantitative measurements of the ergonomic risk at one selected workplace in a Slovak automotive company with four different workers to prove our methodology using wearable wireless multi-sensor systems Captiv and Actigraph. At first, the test was performed in standard conditions without an exoskeleton. The unacceptable physical load was identified in considerable evaluated body areas—neck, hip, and shoulder. Next, the passive chair exoskeleton Chairless Chair 2.0 was used in trials as an ergonomic measure. Our intention was to determine whether an exoskeleton would be an effective tool for optimizing the workload in selected workplaces and whether the proposed unique quantitative measurement system would give reliable and quick results.
- 1 April 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (7) , 3607
Open AccessErgonomic Assessment of Physical Load in Slovak Industry Using Wearable Technologies
The physical tasks of workers are demanding, particularly when performed long-term in unsuitable working position, with high frequency, heavy load, after injury, with developing damage of health or reduced performance due to advanced age. Work-related musculoskeletal disorders (WMSDs) result from overuse or develop over time. Work activities, which are frequent and repetitive, or activities with awkward postures, cause disorders that may be painful during work or at rest. There is a new technology in the market, occupational exoskeletons, which have the prerequisites for minimizing the negative consequences of workload on WMSDs. We provided pilot quantitative measurements of the ergonomic risk at one selected workplace in a Slovak automotive company with four different workers to prove our methodology using wearable wireless multi-sensor systems Captiv and Actigraph. At first, the test was performed in standard conditions without an exoskeleton. The unacceptable physical load was identified in considerable evaluated body areas—neck, hip, and shoulder. Next, the passive chair exoskeleton Chairless Chair 2.0 was used in trials as an ergonomic measure. Our intention was to determine whether an exoskeleton would be an effective tool for optimizing the workload in selected workplaces and whether the proposed unique quantitative measurement system would give reliable and quick results.
- Open Access
- 11 July 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (14) , 5591
Application of the EFQM Model to Assess the Readiness and Sustainability of the Implementation of I4.0 in Slovakian Companies
The fourth industrial revolution (I4.0) is expected to increase quality, efficiency, availability, sustainability, the reduction of costs, the demand for energy and environment, and mainly increase the level of occupational health and safety (OHS). New procedures or paradigms of this revolution deflect from already used standards and create an assumption for building the exceptionality of organizations. The main idea of the performed research was to assess how managers in the Slovak industry perceive the readiness of organizations for the implementation of I4.0. The aim of this study, applied in 53 companies, was to assess two areas: the integration level of complex safety into management systems; and the impact of digitalization on OHS. The applied methodology was based on a modified EFQM (European Foundation for Quality Management) exceptionality model. Answers were transformed into numeric figures using a so-called spider web diagram. In the conclusion of this article, there are described interesting differences in the two mentioned areas based on the perception of both top management and the estimation of the readiness degree of the Slovak organizations for I4.0 concept.
- 11 July 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (14) , 5591
Open AccessApplication of the EFQM Model to Assess the Readiness and Sustainability of the Implementation of I4.0 in Slovakian Companies
The fourth industrial revolution (I4.0) is expected to increase quality, efficiency, availability, sustainability, the reduction of costs, the demand for energy and environment, and mainly increase the level of occupational health and safety (OHS). New procedures or paradigms of this revolution deflect from already used standards and create an assumption for building the exceptionality of organizations. The main idea of the performed research was to assess how managers in the Slovak industry perceive the readiness of organizations for the implementation of I4.0. The aim of this study, applied in 53 companies, was to assess two areas: the integration level of complex safety into management systems; and the impact of digitalization on OHS. The applied methodology was based on a modified EFQM (European Foundation for Quality Management) exceptionality model. Answers were transformed into numeric figures using a so-called spider web diagram. In the conclusion of this article, there are described interesting differences in the two mentioned areas based on the perception of both top management and the estimation of the readiness degree of the Slovak organizations for I4.0 concept.
- Open Access
- 23 June 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (12) , 4292
Analysis of the Risks of Hydrogen Leakage from Hydrogen-Powered Cars and Their Possible Impact on Automotive Market Share Increase
For the safe operation of a hydrogen-powered car, one of the strategic requirements is to design the drive chain so that it is burdened with the least possible risk. At the same time, in order to be able to use it in normal operation, it is necessary to create a risk management system throughout the life of the car so that risks are minimized to the level of their acceptability not only by customers but also by a comprehensive infrastructure during its technical life. Experience has shown that one of the decisive risks in the operation of a hydrogen-powered car is the leakage of hydrogen from the car’s fuel system. The article analyzes the pressure effects on obstacles in the explosion of 1 m3 of a stoichiometric mixture of hydrogen and air. The analysis of the instantaneous pressures as a function of time describes the possible consequences for the human body and the surrounding objects with regard to the distance from the center of the explosion.
- 23 June 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (12) , 4292
Open AccessAnalysis of the Risks of Hydrogen Leakage from Hydrogen-Powered Cars and Their Possible Impact on Automotive Market Share Increase
For the safe operation of a hydrogen-powered car, one of the strategic requirements is to design the drive chain so that it is burdened with the least possible risk. At the same time, in order to be able to use it in normal operation, it is necessary to create a risk management system throughout the life of the car so that risks are minimized to the level of their acceptability not only by customers but also by a comprehensive infrastructure during its technical life. Experience has shown that one of the decisive risks in the operation of a hydrogen-powered car is the leakage of hydrogen from the car’s fuel system. The article analyzes the pressure effects on obstacles in the explosion of 1 m3 of a stoichiometric mixture of hydrogen and air. The analysis of the instantaneous pressures as a function of time describes the possible consequences for the human body and the surrounding objects with regard to the distance from the center of the explosion.
- 11 December 2019
- Published by MM Publishing, s.r.o. in MM Science Journal
- Vol. 2019 (5) , 3702-3705
SOLID AEROSOL– SOURCE OF OCCUPATIONAL DISEASES
Measurements of solid aerosol concentrations are important tools to monitor air conditions at the workplace. In particular, the requirement for the workplace air quality management is necessary to prevent health damage and occupational diseases in exposed jobs. In this case, exceeded limit values...
- 11 December 2019
- Published by MM Publishing, s.r.o. in MM Science Journal
- Vol. 2019 (5) , 3702-3705
SOLID AEROSOL– SOURCE OF OCCUPATIONAL DISEASES
Measurements of solid aerosol concentrations are important tools to monitor air conditions at the workplace. In particular, the requirement for the workplace air quality management is necessary to prevent health damage and occupational diseases in exposed jobs. In this case, exceeded limit values...
- 2 June 2019
- Published by Springer Nature
- p. 287-295
Lift as Subject of Risk Analysis in the Context of Smart Buildings
- 2 June 2019
- Published by Springer Nature
- p. 287-295
Lift as Subject of Risk Analysis in the Context of Smart Buildings
- 13 December 2017
- Published by MM Publishing, s.r.o. in MM Science Journal
- Vol. 2017 (5) , 2046-2049
ANALYSIS OF LOW FREQUENCY MAGNETIC FIELDS GENERATED DURING WELDING
- 13 December 2017
- Published by MM Publishing, s.r.o. in MM Science Journal
- Vol. 2017 (5) , 2046-2049
ANALYSIS OF LOW FREQUENCY MAGNETIC FIELDS GENERATED DURING WELDING
- 7 September 2016
- Published by MM Publishing, s.r.o. in MM Science Journal
- Vol. 2016 (3) , 985-988
MONITORING OF THE MACHINE MILKING PROCESS WITH APPLICATION OF INFRARED THERMOGRAPHY
- 7 September 2016
- Published by MM Publishing, s.r.o. in MM Science Journal
- Vol. 2016 (3) , 985-988
MONITORING OF THE MACHINE MILKING PROCESS WITH APPLICATION OF INFRARED THERMOGRAPHY