EKErik Franciscus Maria Koene

Erik Franciscus Maria Koene

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Erik Franciscus Maria Koene has a total of 97 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Directive-based GPU acceleration of anthropogenic and biosphere flux computations in ICON-ART (v2026.04)

    by Arash Hamzehloo, Erik F. M. Koene, Nikolai Ponomarev, Michael Steiner, Sven Werchner, Xavier Lapillonne, William B. Sawyer, Michael Jähn, Lukas Emmenegger, Dominik Brunner

    Atmospheric composition models require efficient computation of surface fluxes from anthropogenic emissions and terrestrial biosphere exchange. This is particularly true for applications such as ensemble-based inverse emission modeling where these calculations constitute significant performance bottlenecks. We present the directive-based GPU acceleration and comprehensive refactoring of two critical surface-flux modules within the ICON-ART atmospheric modeling framework: the Online Emission Module (OEM) for anthropogenic emissions and the Vegetation Photosynthesis and Respiration Model (VPRM) for biospheric Carbon Dioxide (CO2) exchange. The implementation employs OPENACC compiler directives to expose inherent data parallelism while maintaining a single portable source code for both CPU and GPU architectures. The optimization strategy addresses fundamental incompatibilities between the original CPU-oriented algorithms and GPU execution requirements through three principal modifications: (i) elimination of runtime string comparisons via pre-computed integer-indexed lookup tables constructed during initialization, (ii) temporal decomposition of computations into sections with distinct update frequencies (initialization (once), boundary conditions (periodic), temporal scaling (hourly), and emission kernels (every timestep)) to minimize redundant calculations, and (iii) reorganization of loop hierarchies to maximize memory coalescing across ICON’s horizontal grid dimension. The hybrid CPU–GPU architecture executes initialization and I/O-intensive boundary updates on the host while offloading the computationally dominant temporal scaling and emission kernels to the device, with all tracer tendencies accumulated in device-resident arrays to eliminate host–device transfers within the physics integration loop. Scientific equivalence between CPU and GPU implementations is validated using a probabilistic testing framework, which establishes tolerance envelopes from perturbed CPU ensemble runs. This is consistent with spatial comparisons of simulated CO2 concentration fields over a European domain, which demonstrate pixel-wise agreement within ±0.01 %, corresponding to the numerical noise floor from floating-point arithmetic variations. Performance benchmarks on NVIDIA Grace–Hopper (GH200) superchips of the ALPS supercomputer in Switzerland reveal speedups of ∼1.9× on a single GPU node to 5.8× on five GPU nodes relative to a 278-rank CPU baseline. Despite 54–93 % higher absolute energy consumption on GPUs, the energy-delay product improves by 20–67 %, demonstrating favorable computational efficiency for time-critical applications. These advances enable ensemble-based atmospheric inversions with hundreds of tracers at kilometer-scale resolution within operationally feasible time constraints, supporting assimilation of dense satellite observations from instruments such as TROPOMI and the forthcoming CO2M mission. The GPU-enabled modules have been successfully deployed in recent ICON-ART applications for regional greenhouse-gas inversion and ensemble data assimilation. The single-source, directive-based implementation ensures long-term maintainability and portability across GPU generations while providing a reusable template for accelerating additional model components.

  • Open Access

    Bayesian denoising of satellite images using co-registered NO 2 images

    by Erik Franciscus Maria Koene, Gerrit Kuhlmann, Dominik Brunner

    Accurate emission tracking (e.g., locating and quantifying hot spots) using satellite images requires a good signal-to-noise ratio (SNR) of total column images. Achieving this SNR is challenging for satellite-based trace gas imagers, especially when enhancements are small relative to the background or small relative to retrieval uncertainty. Therefore, some satellites carry additional trace gas imagers with high SNR, such as NO2, which is co-emitted with the trace gas of interest. While NO2 is frequently used qualitatively for plume detection or plume fitting, its potential for quantitative noise reduction remains largely untapped. This paper presents two methods to enhance the SNR of total column images using co-registered NO2 images through minimum mean square error (MMSE) Bayesian denoising, which are a simple form of a Kalman filter or maximum a posteriori estimate. The first “joint MMSE” method relies on the presence of plumes in both the low- and co-registered high-SNR NO2 images. The second “self-similar MMSE” method utilizes image self-similarity and is based on an existing technique called BM3D. The methods are evaluated using a synthetic dataset (SMARTCARB) of atmospheric CO2 and NO2 concentrations, achieving over +40 dB improvement in peak SNR (i.e., an over 10(40/10) increase in SNR). Additionally, the methods are applied to TROPOMI SO2 and NO2 data over South Africa and used to compute a divergence image, demonstrating that an estimated 40 %–80 % noise reduction is possible. By enhancing the SNR of total column images, these techniques improve the detectability of subtle emission signals, which could benefit atmospheric monitoring applications.

  • Open Access

    Temporal variability of NO x emissions from power plants: a comparison of satellite- and inventory-based estimates

    by Gerrit Kuhlmann, Erik Franciscus Maria Koene, Chloe Natasha Schooling, Paul Ian Palmer, Òscar Collado López, Marc Guevara

    Satellite observations of nitrogen dioxide (NO2) are a valuable tool for estimating nitrogen oxides (NOx) emissions from point sources and can support carbon dioxide (CO2) monitoring through emission ratios. We assess the capability of TROPOMI NO2 measurements to quantify the seasonal and day-to-day temporal variability of NOx emissions from eighteen power plants in Europe and the United States. Using the cross-sectional flux (CSF) method implemented in the ddeq Python library (version 1.1), we derive top-down emissions and compare two NOx chemistry corrections approaches: a “local” method based on plume-resolving MicroHH simulations and a “global” method based on GEOS-Chem simulations. Annual top-down estimates using the local approach agree well with bottom-up estimates from the CORSO point source database, with a mean bias of 9 ± 20 % when aggregating point sources within 30 km. A regression analysis yields a slope of 1.05 ± 0.17 and a coefficient of determination of 0.68. The local correction yields emissions that are 58 ± 8 % higher than the global approach. Satellite-based estimates successfully captured seasonal and short-term variability in bottom-up emissions estimated from electricity generation in Europe and continuous emissions monitoring systems (CEMS) in the USA. However, limitations remain due to reduced winter coverage, emissions below the detection limit, overlapping plumes, and uncertainties in NOx chemistry corrections especially for non-isolated facilities. Overall, our findings demonstrate that satellite NO2 observations can effectively monitor the seasonality of NOx emissions from power plants. Addressing remaining uncertainties will be essential for future emission monitoring systems and upcoming satellite missions targeting both NO2 and CO2.


  • Open Access

    Reply on RC2

    by Erik Franciscus Maria Koene, Gerrit Kuhlmann, Dominik Brunner

    Accurate emission tracking (e.g., locating and quantifying hot spots) using satellite images requires a good signal-to-noise ratio (SNR) of total column images. Achieving this SNR is challenging for satellite-based trace gas imagers, especially when enhancements are small relative to the background or small relative to retrieval uncertainty. Therefore, some satellites carry additional trace gas imagers with high SNR, such as NO2, which is co-emitted with the trace gas of interest. While NO2 is frequently used qualitatively for plume detection or plume fitting, its potential for quantitative noise reduction remains largely untapped. This paper presents two methods to enhance the SNR of total column images using co-registered NO2 images through minimum mean square error (MMSE) Bayesian denoising, which are a simple form of a Kalman filter or maximum a posteriori estimate. The first ''joint MMSE'' method relies on the presence of plumes in both the low- and co-registered high-SNR NO2 images. The second ''self-similar MMSE'' method utilizes image self-similarity and is based on an existing technique called BM3D. The methods are evaluated using a synthetic dataset (SMARTCARB) of atmospheric CO2 and NO2 concentrations, achieving over +40 decibels improvement in peak SNR. Additionally, the methods are applied to TROPOMI SO2 and NO2 data over South Africa and used to compute a divergence image, demonstrating that an estimated 30–60 % noise reduction is possible. By enhancing the SNR of total column images, these techniques improve the detectability of subtle emission signals, which could benefit atmospheric monitoring applications.

  • Open Access

    Reply on RC1

    by Erik Franciscus Maria Koene, Gerrit Kuhlmann, Dominik Brunner

    Accurate emission tracking (e.g., locating and quantifying hot spots) using satellite images requires a good signal-to-noise ratio (SNR) of total column images. Achieving this SNR is challenging for satellite-based trace gas imagers, especially when enhancements are small relative to the background or small relative to retrieval uncertainty. Therefore, some satellites carry additional trace gas imagers with high SNR, such as NO2, which is co-emitted with the trace gas of interest. While NO2 is frequently used qualitatively for plume detection or plume fitting, its potential for quantitative noise reduction remains largely untapped. This paper presents two methods to enhance the SNR of total column images using co-registered NO2 images through minimum mean square error (MMSE) Bayesian denoising, which are a simple form of a Kalman filter or maximum a posteriori estimate. The first ''joint MMSE'' method relies on the presence of plumes in both the low- and co-registered high-SNR NO2 images. The second ''self-similar MMSE'' method utilizes image self-similarity and is based on an existing technique called BM3D. The methods are evaluated using a synthetic dataset (SMARTCARB) of atmospheric CO2 and NO2 concentrations, achieving over +40 decibels improvement in peak SNR. Additionally, the methods are applied to TROPOMI SO2 and NO2 data over South Africa and used to compute a divergence image, demonstrating that an estimated 30–60 % noise reduction is possible. By enhancing the SNR of total column images, these techniques improve the detectability of subtle emission signals, which could benefit atmospheric monitoring applications.

  • Open Access

    Reply on RC1

    by Gerrit Kuhlmann, Erik Franciscus Maria Koene, Chloe Natasha Schooling, Paul Ian Palmer, Òscar Collado López, Marc Guevara

    Satellite observations of nitrogen dioxide (NO2) are a valuable tool for estimating nitrogen oxides (NOx) emissions from point sources and can support carbon dioxide (CO2) monitoring through emission ratios. We assess the capability of TROPOMI NO2 measurements to quantify the temporal variability of NOx emissions from eighteen power plants in Europe and the United States. Using the cross-sectional flux (CSF) method implemented in the ddeq Python library (version 1.1), we derive top-down emissions and compare two NOx chemistry corrections approaches: a “local” method based on MicroHH and a “global” method based on GEOS-Chem simulations. Annual top-down estimates using the local approach agree well with bottom-up estimates from the CORSO point source database, with a mean bias of 9 ± 20 % when aggregating sources within 30 km. A regression analysis yields a slope of 1.05 ± 0.17 and a coefficient of determination of 0.68. The local correction yields emissions that are 58 ± 8 % higher than the global approach. Satellite-based estimates successfully captured seasonal and short-term variability in bottom-up emissions estimated from electricity generation in Europe and continuous emissions monitoring systems (CEMS) in the USA. However, limitations remain due to reduced winter coverage, emissions below the detection limit, overlapping plumes, and uncertainties in NOx chemistry corrections especially for non-isolated facilities. Overall, our findings demonstrate that satellite NO2 observations can effectively monitor the seasonality of NOx emissions from power plants. Addressing remaining uncertainties will be essential for future emission monitoring systems and upcoming satellite missions targeting both NO2 and CO2.

  • Open Access

    Comment on egusphere-2025-6057

    by Gerrit Kuhlmann, Erik Franciscus Maria Koene, Chloe Natasha Schooling, Paul Ian Palmer, Òscar Collado López, Marc Guevara

    Satellite observations of nitrogen dioxide (NO2) are a valuable tool for estimating nitrogen oxides (NOx) emissions from point sources and can support carbon dioxide (CO2) monitoring through emission ratios. We assess the capability of TROPOMI NO2 measurements to quantify the temporal variability of NOx emissions from eighteen power plants in Europe and the United States. Using the cross-sectional flux (CSF) method implemented in the ddeq Python library (version 1.1), we derive top-down emissions and compare two NOx chemistry corrections approaches: a “local” method based on MicroHH and a “global” method based on GEOS-Chem simulations. Annual top-down estimates using the local approach agree well with bottom-up estimates from the CORSO point source database, with a mean bias of 9 ± 20 % when aggregating sources within 30 km. A regression analysis yields a slope of 1.05 ± 0.17 and a coefficient of determination of 0.68. The local correction yields emissions that are 58 ± 8 % higher than the global approach. Satellite-based estimates successfully captured seasonal and short-term variability in bottom-up emissions estimated from electricity generation in Europe and continuous emissions monitoring systems (CEMS) in the USA. However, limitations remain due to reduced winter coverage, emissions below the detection limit, overlapping plumes, and uncertainties in NOx chemistry corrections especially for non-isolated facilities. Overall, our findings demonstrate that satellite NO2 observations can effectively monitor the seasonality of NOx emissions from power plants. Addressing remaining uncertainties will be essential for future emission monitoring systems and upcoming satellite missions targeting both NO2 and CO2.

  • Open Access

    Comment on egusphere-2025-6057

    by Gerrit Kuhlmann, Erik Franciscus Maria Koene, Chloe Natasha Schooling, Paul Ian Palmer, Òscar Collado López, Marc Guevara

    Satellite observations of nitrogen dioxide (NO2) are a valuable tool for estimating nitrogen oxides (NOx) emissions from point sources and can support carbon dioxide (CO2) monitoring through emission ratios. We assess the capability of TROPOMI NO2 measurements to quantify the temporal variability of NOx emissions from eighteen power plants in Europe and the United States. Using the cross-sectional flux (CSF) method implemented in the ddeq Python library (version 1.1), we derive top-down emissions and compare two NOx chemistry corrections approaches: a “local” method based on MicroHH and a “global” method based on GEOS-Chem simulations. Annual top-down estimates using the local approach agree well with bottom-up estimates from the CORSO point source database, with a mean bias of 9 ± 20 % when aggregating sources within 30 km. A regression analysis yields a slope of 1.05 ± 0.17 and a coefficient of determination of 0.68. The local correction yields emissions that are 58 ± 8 % higher than the global approach. Satellite-based estimates successfully captured seasonal and short-term variability in bottom-up emissions estimated from electricity generation in Europe and continuous emissions monitoring systems (CEMS) in the USA. However, limitations remain due to reduced winter coverage, emissions below the detection limit, overlapping plumes, and uncertainties in NOx chemistry corrections especially for non-isolated facilities. Overall, our findings demonstrate that satellite NO2 observations can effectively monitor the seasonality of NOx emissions from power plants. Addressing remaining uncertainties will be essential for future emission monitoring systems and upcoming satellite missions targeting both NO2 and CO2.

  • Open Access

    Temporal variability of NO x emissions from power plants: a comparison of satellite- and inventory-based estimates

    by Gerrit Kuhlmann, Erik Franciscus Maria Koene, Chloe Natasha Schooling, Paul Ian Palmer, Òscar Collado López, Marc Guevara

    Satellite observations of nitrogen dioxide (NO2) are a valuable tool for estimating nitrogen oxides (NOx) emissions from point sources and can support carbon dioxide (CO2) monitoring through emission ratios. We assess the capability of TROPOMI NO2 measurements to quantify the temporal variability of NOx emissions from eighteen power plants in Europe and the United States. Using the cross-sectional flux (CSF) method implemented in the ddeq Python library (version 1.1), we derive top-down emissions and compare two NOx chemistry corrections approaches: a “local” method based on MicroHH and a “global” method based on GEOS-Chem simulations. Annual top-down estimates using the local approach agree well with bottom-up estimates from the CORSO point source database, with a mean bias of 9 ± 20 % when aggregating sources within 30 km. A regression analysis yields a slope of 1.05 ± 0.17 and a coefficient of determination of 0.68. The local correction yields emissions that are 58 ± 8 % higher than the global approach. Satellite-based estimates successfully captured seasonal and short-term variability in bottom-up emissions estimated from electricity generation in Europe and continuous emissions monitoring systems (CEMS) in the USA. However, limitations remain due to reduced winter coverage, emissions below the detection limit, overlapping plumes, and uncertainties in NOx chemistry corrections especially for non-isolated facilities. Overall, our findings demonstrate that satellite NO2 observations can effectively monitor the seasonality of NOx emissions from power plants. Addressing remaining uncertainties will be essential for future emission monitoring systems and upcoming satellite missions targeting both NO2 and CO2.

  • Open Access

    Supplementary material to "Temporal variability of NO x emissions from power plants: a comparison of satellite- and inventory-based estimates"

    by Gerrit Kuhlmann, Erik Franciscus Maria Koene, Chloe Natasha Schooling, Paul Ian Palmer, Òscar Collado López, Marc Guevara