HGHuixian Gao

Huixian Gao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Huixian Gao has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    MaterialAlphaSAM: An Adaptive Prompting and Domain Adaptation-Based Segmentation Method for the Microstructure of Complex Titanium Alloys

    by Ke Li, Bowen Deng, Yanru Zhao, Wei Liu, Chao Yang, Jing Zhu, Di Tie, Huixian Gao, Wenzhong Luo

    Precise segmentation of high-magnification titanium alloy micrographs under few-shot scenarios remains a non-trivial task, primarily owing to the intricate morphology, heterogeneous discrete distribution, and weak phase boundaries of the primary α phase. To address these issues, this paper presents MaterialAlphaSAM, a lightweight domain-adaptive segmentation framework built upon the Segment Anything Model (SAM). Leveraging SAM’s powerful global context modeling capability, the proposed method incorporates two key modules: a Geometry-Constrained Prompt Prior (GCPP) module and a Domain-Adaptation Adapter (DAA) module. The GCPP module explicitly embeds geometric and morphological priors to generate semantically guided prompts, effectively alleviating prompt redundancy and noise sensitivity. The DAA module performs cross-domain alignment of the encoder features, reducing the domain discrepancy between natural images and metallic microstructures. Extensive experiments demonstrate that both modules consistently boost segmentation performance. On the titanium alloy dataset, MaterialAlphaSAM achieves 89.53% IoU and a 94.40% F1-score, outperforming FCN, UNet, DeepLabV3, PSPNet and the vanilla SAM. It exhibits superior robustness to weak boundaries, fine-scale α phases, and complex background interference.

  • Open Access

    Impact of Heat Treatment on the Mechanical Properties and Fracture Morphology of Ti555211 Alloy

    by Yushe Gao, Xiangyi Xue, Yuxuan Du, Xianghong Liu, Huixian Gao, Jianguo Wang, Junfeng Xu

    Heat treatment is important for optimizing the strength performance and improving the toughness of titanium alloys. In this study, we investigated the impact of three heat treatment methods (β-annealing, double annealing, and solid-solution and aging treatment) on the mechanical properties and fracture morphology of Ti555211 titanium alloy. The results show that after β-annealing treatment, the alloy retains a high strength, while showing almost no ductility, and no yield strength. The alloy after double annealing has a high elongation rate (~54%) and lower strength. After solid-solution and aging heat treatment, the alloy was able to retain both high strength and a certain degree of ductility. The optimal heat-treatment process is solid-solution treatment at 820 °C/2 h and aging at 560 °C/12 h, which results in a maximum tensile strength of 1404 MPa and an elongation rate of 11%.

  • Open Access

    Hot Workability and Microstructural Evolution of Ti-5.5Al-5Mo-5V-2Nb-1Fe-1Zr Titanium Alloy Based on the Different Phase Zones during Plastic Deformation at High Temperatures

    by Yushe Gao, Xianghong Liu, Haisheng Chen, Xiangyi Xue, Huixian Gao, Wenzhong Luo, Kaixuan Wang, Shaoqiang Li, Yuxuan Du

    Hot workability and microstructural evolution of Ti-5.5Al-5Mo-5V-2Nb-1Fe-1Zr titanium alloy, which is also called Ti555211 titanium alloy, are investigated during compressive deformation at different temperatures and strain rates. It can be found that Ti555211 samples deformed at 750 and 850 °C comprised α and β phases, while Ti555211 samples deformed at 950 and 1050 °C consist of single β phase. When Ti555211 sample undergoes compressive deformation in the α + β phase region, microstructures of β phase vary more substantially than those of α phase, which means that plastic deformation of Ti555211 sample is governed by β phase. The process parameters are optimized by establishing processing maps based on dynamic material model. Ti555211 alloy generally possesses the better hot workability in the β phase zone. In the β phase zone of Ti555211 alloy, the best hot process area involves temperature range from 925 to 1025 °C and a strain rate range of 0.005 to 0.03 s−1.


  • Open Access

    Investigation of High-Temperature Constitutive Behavior of Ti555211 Titanium Alloy Subjected to Plastic Deformation in the Different Phase Regions

    by Yushe Gao, Xiangyi Xue, Huixian Gao, Wenzhong Luo, Kaixuan Wang, Shaoqiang Li, Xianghong Liu, Yuxuan Du

    Ti555211 titanium alloy is subjected to plastic deformation in the dual-phase (α + β phase) zone and single-phase (β phase) zone at various deformation temperatures and strain rates. High-temperature constitutive equations of the alloy in the dual-phase zone and single-phase zone are established in order to describe deformation behavior of the alloy in the different phase zones. By comparing the constitutive equation of the alloy in the dual-phase zone with that of the alloy in the single-phase zone, the deformation activation energy of the former was found to be higher than that of the latter. It is obvious that the deformation activation energy of α phase is obviously greater than that of β phase. Furthermore, the microstructural evolution of the alloy is different in the dual-phase zone and single-phase zone. When the alloy was subjected to plastic deformation in the dual-phase zone, the size of the grains in the β phase increased with the decreasing strain rate. When the alloy was subjected to plastic deformation in the single-phase zone, the size of the grains in the β phase considerably increased with the increasing deformation temperature. In particular, in the microstructures of the alloy subjected to plastic deformation in the single-phase region, the elongated grains can be observed at higher strain rates. Furthermore, it is more difficult for the alloy to induce plastic deformation in the dual-phase region than in the single-phase region.


  • Enhanced Critical Current Densities in Nb3Sn Superconducting Strands Prepared by Bronze Process

    by Zhang Ke, Qin Xing, Hou Jing, Wu Bo, Gao Huixian, Liu Jianwei, Li Jianfeng, Zhang Pingxiang, Liu Xianghong, Feng Yong

    In the development of Nb$_{3}$Sn superconducting strands, the improvement of the non-Cu critical current density (${Jc}$) has been greatly emphasized. Different Nb$_{3}$Sn strands were manufactured by the bronze route artificially doped with titanium in bronze. The influences of bronze on Nb volume ratio, filament material, filament diameter, and heat treatment were studied. In this research, Bronze to Nb volume ratio affected ${Jc}$ slightly due to the formation of the Sn shortage and similar Nb$_{3}$Sn volume after heat treatment. The study of filament diameter indicates that ${Jc}$ increases largely as the filament diameter reduces for the full reaction. Different heat treatment times at 575 °C, 650 °C, and 675 °C will result in various performances. According to microstructure images, residual Nb core can be seen in each filament. Bigger average grain size will lead to lower ${Jc}$.