Do Gyun Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Do Gyun Kim has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Dongkeun Park
Francis Bitter Magnet Laboratory (FBML)Plasma Science and Fusion Center (PSFC), Massachusetts Institute of Technology (MIT), Cambridge, MA, USA
2 shared publications - Hyun Man Jang
Rare Isotope Science Project, Institute for Basic Science, Daejeon, South Korea
2 shared publications - Junseong Kim
Facility for Rare Isotope Beams, East Lansing, MI, USA
2 shared publications - Kideok Sim
R&D center, SuperGenics, co., Ltd., ChangWon Korea (the Republic of)
2 shared publications - Sukjin Choi
Rare Isotope Science Project, Institute for Basic Science, Daejeon, South Korea
2 shared publications A. Mukherjee
1 shared publication
Latest Publications
- 30 September 2025
- Published by Korean Physical Society in Physics and High Technology
- Vol. 34 (9) , 2-6
TOP-Tier Platform in Extreme Rare Isotope Science (TOPTIER)
The TOPTIER (Top-Tier platform In Extreme Rare Isotope science) initiative represents a strategic international collaboration between South Korea’s RAON(Rare isotope Accelerator complex for ON-line experiments) and Japan’s RIBF (Radioactive Isotope Beam Factory), two of the world’s leading rare isotope (RI) beam facilities. Launched in July 2024, TOPTIER aims to establish a sustainable platform for joint research, researcher exchange, and shared infrastructure in the field of nuclear physics. This paper outlines the motivations behind TOPTIER’s creation, its three-stage development roadmap (2024–2033), and major goals including the discovery of extreme neutron-rich isotopes. Notable Korean-led projects approved by RIKEN’s Program Advisory Committee demonstrate the increasing impact of this collaboration. Furthermore, the platform supports global talent cultivation through summer schools, workshops, and postdoctoral programs. By integrating complementary strengths in RI beam production and experimental capabilities, TOPTIER is poised to become a global hub for extreme rare isotope research and to contribute to a deeper understanding of the origin of matter and the universe.
- 30 September 2025
- Published by Korean Physical Society in Physics and High Technology
- Vol. 34 (9) , 2-6
TOP-Tier Platform in Extreme Rare Isotope Science (TOPTIER)
The TOPTIER (Top-Tier platform In Extreme Rare Isotope science) initiative represents a strategic international collaboration between South Korea’s RAON(Rare isotope Accelerator complex for ON-line experiments) and Japan’s RIBF (Radioactive Isotope Beam Factory), two of the world’s leading rare isotope (RI) beam facilities. Launched in July 2024, TOPTIER aims to establish a sustainable platform for joint research, researcher exchange, and shared infrastructure in the field of nuclear physics. This paper outlines the motivations behind TOPTIER’s creation, its three-stage development roadmap (2024–2033), and major goals including the discovery of extreme neutron-rich isotopes. Notable Korean-led projects approved by RIKEN’s Program Advisory Committee demonstrate the increasing impact of this collaboration. Furthermore, the platform supports global talent cultivation through summer schools, workshops, and postdoctoral programs. By integrating complementary strengths in RI beam production and experimental capabilities, TOPTIER is poised to become a global hub for extreme rare isotope research and to contribute to a deeper understanding of the origin of matter and the universe.
- 4 May 2023
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
- Vol. 540, 219-223
Current status of In-flight fragment separator for RAON
- 4 May 2023
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
- Vol. 540, 219-223
Current status of In-flight fragment separator for RAON
- 1 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-5
Design, Manufacture and Test of the Superconducting Quadrupole Triplet Magnet With Multi-Layered Direct-Wound Hexapole and Octupole Magnets
Currently, the Rare Isotope Science Project of the Institute for Basic Science has been constructing a heavy ion accelerator facility, named RAON. For rare isotope science research in Korea, the RAON includes two different types of facilities; one is the isotope separation on-line, and another is the in-flight system. In the in-flight system, several types of magnets are located: dipole, quadrupole, hexapole, and octupole magnets. Among them, a superconducting quadrupole triplet magnet (SQTM) system has been developed since 2018 and to date, all SQTM systems were manufactured and are being tested. In this paper, the design, manufacture, and commissioning test results of the SQTM systems for the RAON are presented. This magnet consists of five magnets of three different kinds: three quadrupole magnets, a hexapole magnet, and an octupole magnet. All magnets were made by low-temperature superconducting NbTi wires. For manufacturing the hexapole and octupole magnets with a multi-layer structure in a narrow space, the low-temperature superconducting wire was wound by the direct winding method.
- 1 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-5
Design, Manufacture and Test of the Superconducting Quadrupole Triplet Magnet With Multi-Layered Direct-Wound Hexapole and Octupole Magnets
Currently, the Rare Isotope Science Project of the Institute for Basic Science has been constructing a heavy ion accelerator facility, named RAON. For rare isotope science research in Korea, the RAON includes two different types of facilities; one is the isotope separation on-line, and another is the in-flight system. In the in-flight system, several types of magnets are located: dipole, quadrupole, hexapole, and octupole magnets. Among them, a superconducting quadrupole triplet magnet (SQTM) system has been developed since 2018 and to date, all SQTM systems were manufactured and are being tested. In this paper, the design, manufacture, and commissioning test results of the SQTM systems for the RAON are presented. This magnet consists of five magnets of three different kinds: three quadrupole magnets, a hexapole magnet, and an octupole magnet. All magnets were made by low-temperature superconducting NbTi wires. For manufacturing the hexapole and octupole magnets with a multi-layer structure in a narrow space, the low-temperature superconducting wire was wound by the direct winding method.
- 31 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 30 (4) , 1-4
Quench Analysis of an LTS Quadrupole Triplet Magnet System for the IBS RAON In-Flight Fragment Separator
In this paper we present quench analysis results of a Low-Temperature Superconducting (LTS) quadrupole triplet magnet system, a part of the In-flight Fragment (IF) separator of a heavy ion linear accelerator complex, named RAON, currently being constructed by the Institute of Basic Science (IBS). This magnet system is composed of three quadrupole magnets: a triplet, surrounded by iron yokes and embedding hexapole/octupole LTS coils for field correction. The magnet will be operated at 4.2 K in liquid helium. For reliable and safe operation of this complex superconducting system, quench and protection analysis with possible failure scenarios must be performed. In this paper, we first discuss probable quench scenarios and then present results of the quench propagation analysis on: 1) coil currents and voltages by multi-coil model circuit analysis; and 2) simulated temperature distribution inside each coil. Our quench analysis results show that the maximum voltage and temperature in each coil are below safety limits, 2000 V and 150 K, respectively, and confirm that this quadruple triplet magnet system is self-protecting.
- 31 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 30 (4) , 1-4
Quench Analysis of an LTS Quadrupole Triplet Magnet System for the IBS RAON In-Flight Fragment Separator
In this paper we present quench analysis results of a Low-Temperature Superconducting (LTS) quadrupole triplet magnet system, a part of the In-flight Fragment (IF) separator of a heavy ion linear accelerator complex, named RAON, currently being constructed by the Institute of Basic Science (IBS). This magnet system is composed of three quadrupole magnets: a triplet, surrounded by iron yokes and embedding hexapole/octupole LTS coils for field correction. The magnet will be operated at 4.2 K in liquid helium. For reliable and safe operation of this complex superconducting system, quench and protection analysis with possible failure scenarios must be performed. In this paper, we first discuss probable quench scenarios and then present results of the quench propagation analysis on: 1) coil currents and voltages by multi-coil model circuit analysis; and 2) simulated temperature distribution inside each coil. Our quench analysis results show that the maximum voltage and temperature in each coil are below safety limits, 2000 V and 150 K, respectively, and confirm that this quadruple triplet magnet system is self-protecting.
- 15 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (6) , 1-6
Prototype HTS Quadrupole Magnet for the In-Flight Fragment Separator of RISP
The Rare Isotope Science Project (RISP) for constructing a heavy ion accelerator complex was launched in 2011 in Korea. As one of the rare isotope production systems, an in-flight fragment (IF) separator system will be installed for RISP. We plan to use high-temperature superconducting (HTS) quadrupole magnets in the forepart of the IF separator to cool efficiently the magnets from large radiation heat load at around 40 K. The HTS quadrupole magnet should withstand a high radiation dose (~10 MGy/year). A prototype HTS quadrupole magnet was designed and fabricated taking into account radiation damage and heating. The magnet employs two kinds of HTS wires, and the HTS wire is co-wound with a stainless steel tape for electrical insulation. The magnet is cooled by circulation of cold helium gas through the cooling channels. Various tests were performed under normal and abnormal operating conditions. Test results show that the HTS quadrupole magnet can operate in the required field gradient stably. The magnet can also be self-protected by metal insulation under the abnormal operating conditions.
- 15 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (6) , 1-6
Prototype HTS Quadrupole Magnet for the In-Flight Fragment Separator of RISP
The Rare Isotope Science Project (RISP) for constructing a heavy ion accelerator complex was launched in 2011 in Korea. As one of the rare isotope production systems, an in-flight fragment (IF) separator system will be installed for RISP. We plan to use high-temperature superconducting (HTS) quadrupole magnets in the forepart of the IF separator to cool efficiently the magnets from large radiation heat load at around 40 K. The HTS quadrupole magnet should withstand a high radiation dose (~10 MGy/year). A prototype HTS quadrupole magnet was designed and fabricated taking into account radiation damage and heating. The magnet employs two kinds of HTS wires, and the HTS wire is co-wound with a stainless steel tape for electrical insulation. The magnet is cooled by circulation of cold helium gas through the cooling channels. Various tests were performed under normal and abnormal operating conditions. Test results show that the HTS quadrupole magnet can operate in the required field gradient stably. The magnet can also be self-protected by metal insulation under the abnormal operating conditions.
- 15 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (3) , 1-6
Electromagnetic Design of Consecutive HTS Quadrupole Magnets for the Preseparator at RISP
The rare isotope science project (RISP) was established at the Institute for Basic Science, Daejeon, South Korea to construct a heavy ion acceleration facility for rare isotope beam production. The separators include two pre- and main separators. The central purpose of the preseparator is to remove the primary and unwanted isotope beams; radiation heating and shielding are the major design considerations. For a warm ion, the high-temperature superconducting (HTS) dipole magnet will be used in the front region of the preseparator, and six HTS quadrupole magnets will be installed consecutively. In this paper, we present the electromagnetic design details and the specifications of the consecutive HTS quadrupole magnets for the preseparator at the RISP. Metal (Stainless steel 316) insulated magnets were designed to include iron cores. Using the finite-element method tool, six HTS magnets were modeled and simulated. The operational characteristics including the field gradient, effective length, and uniformity of each magnet were analyzed and presented as well. The research outcomes will be useful for the actual construction of a heavy ion acceleration facility in South Korea.
- 15 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (3) , 1-6
Electromagnetic Design of Consecutive HTS Quadrupole Magnets for the Preseparator at RISP
The rare isotope science project (RISP) was established at the Institute for Basic Science, Daejeon, South Korea to construct a heavy ion acceleration facility for rare isotope beam production. The separators include two pre- and main separators. The central purpose of the preseparator is to remove the primary and unwanted isotope beams; radiation heating and shielding are the major design considerations. For a warm ion, the high-temperature superconducting (HTS) dipole magnet will be used in the front region of the preseparator, and six HTS quadrupole magnets will be installed consecutively. In this paper, we present the electromagnetic design details and the specifications of the consecutive HTS quadrupole magnets for the preseparator at the RISP. Metal (Stainless steel 316) insulated magnets were designed to include iron cores. Using the finite-element method tool, six HTS magnets were modeled and simulated. The operational characteristics including the field gradient, effective length, and uniformity of each magnet were analyzed and presented as well. The research outcomes will be useful for the actual construction of a heavy ion acceleration facility in South Korea.
- 30 September 2015
- Published by The Korea Institute of Applied Superconductivity and Cryogenics in Progress in Superconductivity and Cryogenics
- Vol. 17 (3) , 23-27
Magnetic field characteristics from HTS quadruple magnet of in-flight separator for a heavy ion accelerator
- 30 September 2015
- Published by The Korea Institute of Applied Superconductivity and Cryogenics in Progress in Superconductivity and Cryogenics
- Vol. 17 (3) , 23-27
Magnetic field characteristics from HTS quadruple magnet of in-flight separator for a heavy ion accelerator