AEAdel Elgammal

Adel Elgammal

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Adel Elgammal has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    MOPSO-Tuned Robust Model Predictive Control of Bidirectional Inductive Power Transfer Systems Under Coupling and Load Uncertainty: Coordinated Voltage and Frequency Support for Grid-Connected Electric Vehicle Charging

    by Adel Elgammal

    The rapid development of electric vehicles (EVs) creates a need for charging systems that provide convenience and energy efficiency while supporting the electric grid. One possible solution is Bidirectional Inductive Power Transfer (BIPT), which enables contact-less energy transfer between the EV battery and the electric grid. However, variations in magnetic coupling, such as coil misalignments, changes in battery load, and disturbances on the electric grid, can significantly degrade power-transfer efficiency, voltage regulation, and system stability. To address these issues, this research proposes a Multi-Objective Particle Swarm Optimisation (MOPSO) tuned Robust Model Predictive Control (RMPC) system for grid-connected BIPT systems. This system will combine uncertainty-aware power regulation with coordinated voltage and frequency support. A MATLAB/Simulink model includes bidirectional power converters, series-series resonant compensation, magnetic coupling variations, battery characteristics, and grid-side active and reactive power control. The proposed RMPC strategy accounts for bounded uncertainty in the coupling and load. It optimises voltage tracking, frequency regulation, power-transfer accuracy, and control effort subject to converter and battery constraints. MOPSO will determine Paretooptimal controller parameters, eliminating the traditional trialand-error tuning process. The proposed system will have a nominal power rating of 3.3 kW, an operating frequency of 85 kHz, and a magnetic coupling coefficient ranging from 0.15 to 0.35. Simulation scenarios will include battery resistance variations of plus 20 parcent, grid voltage disturbances of plus 10 parcent, frequency deviations of plus 0.5 Hz, and switching between grid-to-vehicle and vehicle-to-grid modes of operation. Performance evaluation will compare the proposed system with conventional proportionalintegral control and nominal MPC using voltage tracking error, transient overshoot, settling time, frequency recovery, power transfer efficiency, and compliance with operational constraints. This investigation aims to determine whether the optimised RMPC framework improves disturbance rejection, maintains stable bidirectional energy transfer, and coordinates active and reactive power responses under simultaneous uncertainties. This researchs primary contribution is integrating robust predictive regulation, Multi-objective controller optimisation and coordinated grid support capabilities into a single wireless charging architecture. This proposed approach may increase charging reliability, reduce sensitivity to coil misalignment, and enable EV batteries to play a greater role in enhancing grid flexibility and integrating renewable energy sources. However, this approach needs experimental verification and an assessment of real-time computational requirements, battery degradation, communication reliability, and hardware limitations. This study provides a systematic approach for evaluating intelligent, grid-responsive wireless EV charging, which could lead to more robust electric grids, more sustainable transportation infrastructure, and the transition toward low-carbon mobility.

  • Open Access

    Intelligent control of three-phase induction motor drives using deep reinforcement learning and multi-objective particle swarm optimization for sustainable electrified systems

    by Adel Elgammal

    This study proposes an intelligent control framework that integrates deep reinforcement learning (DRL) and multi-objective particle swarm optimization (MOPSO) to enhance the dynamic performance, energy efficiency, and robustness of three-phase asynchronous motor drives applied in sustainable electrification systems. The proposed framework integrates a DRL agent with an MOPSO optimizer within an adaptive control architecture. The DRL controller learns optimal control policies through continuous interaction with the motor drive system, while MOPSO simultaneously optimizes multiple conflicting objectives, including torque ripple minimization, total harmonic distortion (THD) reduction, speed-tracking accuracy improvement, and energy-efficiency enhancement. The controller is evaluated using a high-fidelity MATLAB/Simulink induction motor model under load disturbances, parameter variations, and stochastic uncertainties. Simulation results demonstrate torque ripple reductions of 25–30% compared with conventional Field-Oriented Control (FOC) and Direct Torque Control (DTC). THD decreases from 6.8% (DTC) and 4.1% (FOC) to approximately 1.9%, while speed-response settling time is reduced to 0.12 s with less than 4% overshoot. Drive efficiency improves by 8–12%, and performance deviations remain below 5% under uncertain operating conditions. The proposed DRL–MOPSO framework significantly outperforms conventional control methods in terms of efficiency, dynamic response, and robustness. The framework offers a viable intelligent control solution for electric vehicles, industrial automation, and renewable-energy-powered drive systems, supporting sustainable and reliable electrified applications.

  • Intelligent Multi-Agent Deep Reinforcement Learning for Autonomous Microgrid Management: Enhancing Energy Resilience through Solar-Wind-Battery Integration in Urban Networks

    by Adel Elgammal

    Current urban power systems are facing dual challenges amid the process of integrating renewable energy: continuous growth in energy demand, and compromised grid stability and energy security under the impact of climate disasters. Traditional centralized control systems cannot adapt to the complex dynamic interactions of distributed photovoltaics, wind turbines, and energy storage units within urban microgrids, so energy resilience vulnerabilities are easily exposed during peak load periods and extreme weather scenarios. To address this problem, this study proposes a new multi-agent deep reinforcement learning (MADRL) framework that solves the core flaws of traditional systems through decentralized decision-making and adaptive control mechanisms. This framework uses a hybrid Actor-Critic architecture integrated with graph neural networks, and relies on a multi-objective reward mechanism to simultaneously optimize three core indicators: energy cost, carbon emissions, and grid stability. This study conducts simulation verification on a typical urban block microgrid configured with 500kW photovoltaics, 150kW wind power, and 400kWh battery energy storage. Taking traditional rule-based control systems as the comparison baseline, Simulation results show that the proposed framework improves energy cost efficiency by 23%, reduces carbon emissions by 18%, and increases grid disturbance response speed by 35%. During peak production periods, the renewable energy utilization rate reaches 94%; when sudden load changes occur, grid frequency remains stable within ±0.2Hz. Furthermore, the framework can be deployed in a scalable way to adapt to the weather patterns, electricity consumption characteristics, and grid infrastructure constraints of different cities. This study has certain limitations: it requires high computing power to implement in real time, and it relies on large amounts of training data. This framework can be applied to urban energy planning, smart city construction, and climate change mitigation strategies, and can deliver social values including improved energy security, reduced user electricity bills, and enhanced environmental sustainability of urban communities.

  • Open Access

    Data-Driven Predictive Diagnostics and Fault-Tolerant Control for Fuel-Cell Electric Vehicle Powertrains Under Uncertainty

    by Adel Elgammal

    Fuel-cell electric vehicles (FCEVs) are susceptible to sensor drift, actuator degradation and air path/water management faults that can quickly deteriorate efficiency, drivability and durability. This work introduces a control-oriented data-driven framework to integrate predictive diagnostics with FTC for FCEV powertrains subject to uncertainty. A multi-sensor feature pipeline comprising stack voltage/current, cathode pressure, compressor speed, hydrogen flow rate DC-link voltage and traction power is first established and the health indicators are generated via a probabilistic sequence model modeling temporal dependencies. The diagnostic module conducts an online detection and isolation of the faults in early stages with fault magnitude estimation for remaining useful time to predict constraint violation. Second, an active FTC layer allows real-time fault estimation–based control reconfiguration to update an uncertainty-aware powertrain controller by which fuel-cell ramp-rate limits, air-path constraints and energy-storage limits are enforced. The controller ensures that fast power transients are absorbed by the battery/supercapacitor, while keeping the fuel-cell system operational at high efficiencies and ensuring traction power tracking in addition to safe limits during faults. Uncertainty is dealt with by disturbance modeling and confidence-weighted adaptation to avoid overreacting to noisy diagnostic outputs. Simulation results for representative urban and aggressive drive cycles are presented, which incorporate introduced sensor bias, compressor efficiency loss and hydrogen starvation scenarios that show superior robustness compared with the non-tolerant 'baseline' in terms of increased fault detection lead time, no constraint or emissions coverage issues as well as efficient minimisation of hydrogen consumption while maintaining drivability. The considered combination of predictive diagnostics and FTC can thus offer a practical approach to reliable FCEV operation that will bring quantifiable safety and efficiency gains under real-world automotive scenarios.

  • Robust DC–DC and Inverter Control for PEM Fuel-Cell/Battery/Supercapacitor Hybrid Electric Vehicles Using Fuzzy Logic and MOPSO under Load Transients and Parameter Uncertainty

    by Adel Elgammal

    This paper presents a reliable power-electronics control and energy-management system for PEM fuel-cell electric vehicles (FCEVs) equipped with hybrid energy storage (battery–supercapacitor) to guarantee stability of the system in the presence of sudden load variations and parameter intervals. A unidirectional DC–DC interface for the PEMFC, bidirectional DC–DC stages for the battery and supercapacitor, and a traction inverter feeding the electric drive are included in this system. Real-time power split of the fuel cell and supercapacitor is achieved by a fuzzy-logic supervisory controller, which employs rule-based decision making with respect to NBC traction demand, DC-link voltage error, PEMFC ramp constraints, battery/supercapacitor SOC/SOE limits. A multi-objective particle swarm optimization (MOPSO) layer optimizes fuzzy membership parameters and weighting factors with multiple objectives that enable the minimization of hydrogen consumption, DC-link ripple, peak converter currents, and inverter stress as well as the imposition of fuel-cell current-slew rate limits and storage health constraints. Stability is tested with dual uncertainties in fuel- cell polaristic/ohmic parameters and converter/inverter elements (e.g., ±20% fluctuations in the main electrical parameters), and under aggressive step-load perturbations. Simulations with representative drive cycles along with step-load disturbances (e.g., 0.3–0.5 pu torque/power steps) reveal that the fuzzy–MOPSO approach reduces DC-link voltage overshoot by 40–60% and settling time by 30–45% compared to cascaded PI control and non-optimized fuzzy supervision were observed. The DC-link ripple amplitude was reduced by 35–55%, and the peak currents in the supercapacitor and battery utilization were decreased by 20–35% demonstrating less thermal stress and increased reliability. The supercapacitor provided the high-frequency transients, while the battery the midfrequency dynamics, and the PEMFC supplied nominal power with safe ramp limits, achieving a reduction in hydrogen consumption of 5-12% across tested cycles. In summary, the results demonstrate that fuzzy–MOPSO co-design offers a practical method to robust, efficient and durable FCEV powertrain control under real driving fluctuations and uncertainties.

  • Reinforcement learning-based multi-objective PSO adaptive control framework for hydrogen consumption optimization and durability enhancement in fuel-cell electric vehicle powertrains

    by Adel Elgammal

    This study proposes a reinforcement learning-based multi-objective particle swarm optimization (RL–MOPSO) adaptive control framework to improve hydrogen utilization, enhance component durability, and ensure robust real-time energy management in fuel-cell electric vehicle (FCEV) powertrains under dynamic operating conditions. The proposed framework integrates deep reinforcement learning with multi-objective particle swarm optimization within a hierarchical control architecture. The RL agent learns optimal power management policies through continuous interaction with the vehicle environment, while MOPSO optimizes conflicting objectives including hydrogen consumption, fuel-cell degradation, system efficiency, and battery state-of-charge (SOC) stability. Degradation-aware objective functions penalize rapid load variations, excessive current densities, and operation outside optimal fuel-cell regions. The controller is evaluated using a high-fidelity FCEV model under WLTC and urban driving cycles and compared with rule-based control (RBC), model predictive control (MPC), and standalone RL strategies. Simulation results demonstrate hydrogen consumption reductions of 18–25% relative to MPC and 30–35% relative to RBC. Fuel-cell degradation indicators decrease by 20–28%, while overall powertrain efficiency improves by 12–17% and stable SOC regulation is maintained under varying operating conditions. The RL–MOPSO framework achieves superior energy efficiency, durability, and robustness compared with conventional control methods. The low computational burden of the trained RL policy enables real-time implementation in embedded automotive control systems, supporting the deployment of sustainable and reliable hydrogen-powered transportation.

  • Open Access

    Mitigating harmonics and voltage disturbances in PV systems through intelligent multi-level inverter modulation and active filtering under grid disturbances

    by Adel Elgammal

    High-penetration photovoltaic (PV) plants integrated into weak or distorted grids suffer from power quality degradation. Voltage sag/swell, unbalance, and background harmonics may exacerbate inverter distortion and lead to unintended tripping. In this paper, a novel approach for harmonic and voltage distortion mitigation in grid-connected PV systems is presented. The methodology combines intelligent multi-level inverter modulation with coordinated shunt active power filtering. A disturbance-aware modulation layer dynamically modulates switching states to nullify dominant harmonic clusters, and a joint active filter extracts and compensates harmonic/reactive components with minimal interference in DC-link regulation. A supervisory disturbance classifier with waveform features, such as sag depth and negative sequence content, adapts control weights and filter gains online. Some case studies on simulation and hardware-in-the-loop simulate balanced operation, sag and swell events, unbalanced faults, and harmonics-polluted grids. Under disturbed conditions, the proposed scheme reduces THD for grid current from around 5–8% to less than 2%, complying with IEEE 519, while tracking a near-unity power factor and maintaining stable DC-link voltage. The voltage sag has an approximately 30–50% reduction in voltage deviation envelopes from fixed-modulation baselines, and recovery occurs within just a few oscillations depending on the disturbance level. Correlated smart multi-level modulation, together with adaptive active filtering, enhances disturbance ride-through capability and harmonic behavior under weak-grid conditions. The approach offers an applicable way to interconnect PV-based sources with better power quality support and less resonance sensitivity in cases of changing grid impedance.

  • Open Access

    Efficiency and Energy–Emissions Optimization of Hydrogen–Fuel Cell Power Systems Using Multi-Objective PSO Strategy for Sustainable Marine Vessel PropulsionEfficiency and Energy–Emissions Optimization of Hydrogen–Fuel Cell Power Systems Using Multi-Objective PSO Strategy for Sustainable Marine Vessel Propulsion

    by Adel Elgammal

    Hydrogen–Fuel Cell (HFC) systems have become one of the most promising zero-carbon shipping solutions, with high energy-conversion efficiency, silent operation and potential for full decarbonization when coupled with renewable hydrogen production. Yet, the operational efficiency of HFC marine power systems is significantly affected by nonlinear electrochemical kinetics, interactions between subsystems and extremely wide fluctuating load profiles typical for naval service missions. The resulting complex multi-variable control laws open up trade-offs between efficiency, hydrogen consumption, dynamic response and emission of auxiliary by-products like NOx, unconverted hydrogen and water vapor exhaust. To tackle these issues, the present work puts forward a complete Multi Objective Particle Swarm Optimization (MOPSO) framework for the combined performance and emissions optimization of hydrogen marine–FC propulsion systems. The MOPSO technique is used to optimize decision variables such as fuel cell operating current density, stack temperature, air stoichiometric ratio, compressor control and the proportion at which ESS is lead on hybrid with a Pareto-optimal trade-offs between: (i) system efficiency, (ii) hydrogen consumption, (iii) emissions and by-product reduction, and (iv) component degradation and thermal stress reduction. A high-fidelity dynamic simulation model has been developed, combining PEM fuel cell electrochemical kinetics, onboard power demand information and compressor-humidifier dynamics with marine propulsion load cycles for patrol, ferry and tugboat duties. Results show that the MOPSO optimized control strategy increases net fuel cell efficiency by 12-18%, decreases hydrogen consumption by 15-27%, and decreases auxiliary emissions and stack temperature excursions by up to 35% as compared with the baseline, rule based, and single-objective tuning approaches. Moreover, degradation parameters such as voltage decay rate and membrane hydration instability were dramatically mitigated which enabled extension of the projected stack life time by 20–30%.


  • Open Access

    Robust Sliding Mode Control-Based Multi-Objective Particle Swarm Optimization for Harmonic Distortion Mitigation in Wind-Dominated Grids Using Real-Time Tuned Shunt Active Power Filters

    by Adel Elgammal

    Through the escalating penetration of wind generation in modern power systems, new challenges are imposed on power quality, including harmonic distortion caused by power electronic based interfaces and non-linear loads. To overcome these problems, this paper proposes a new hybrid control strategy of Shunt Active Power Filters (SAPFs) based on the Sliding Mode Control (SMC) and the Multi-Objective Particle Swarm Optimization (MOPSO), to thereby improve the performance of such filters in harmonic compensation in wind-based electrical systems. The robustness and fast dynamic response characteristic of SMC is used to maintain system's stability under variation of wind generation and load. Meanwhile, controller parameters are optimized online based on MOPSO to satisfy various inconsistent control objectives such as Total Harmonic Distortion (THD) reduction, reactive power compensation, and low switching loss. A dynamic grid connected wind energy system is simulated in MATLAB/Simulink with DFIG, nonlinear loads, and SAPF under various operating conditions. The Pareto-optimal set of controller gains is obtained by MOPSO algorithm that provides trade-off between harmonic compensation performance and control effort. The proposed system is analyzed using different wind speeds and load patterns to check the reliability and adaptability. Simulation comparatives with the classical PI, as well as the non-optimized SMC controller, show an important decrease in THD (attaching the standard IEEE-519) accepting power factor correction and the system stability. The findings validate that, the inclusion of SMC-based tuning with MOPSO improves the real-time efficiency of SAPFs. This work underpins the intelligent and adaptive PQ solutions for future smart grid applications with greater renewable-based generation. The developed approach is scalable, computationally inexpensive, and convenient for on-line application in active distribution networks.

  • Open Access

    A maximum power point tracking control for oscillating water column ocean wave energy converters

    by Adel Elgammal

    The oscillating water column (OWC) is a leading technology for harnessing ocean wave energy, offering significant potential for renewable energy generation. This study proposes a novel maximum power point tracking (MPPT) control strategy aimed at improving the energy conversion efficiency of OWC-based ocean wave energy converters (OWECs) operating in variable and unpredictable sea states. The control system dynamically adjusts key operational parameters, such as turbine rotational speed, in real-time using feedback from wave height sensors and turbine speed controllers. By continuously tracking and adapting to changing wave conditions, the MPPT algorithm ensures that the OWEC operates at its optimal energy extraction point. Extensive simulation results demonstrate that the proposed MPPT strategy achieves a 25% increase in power output on average compared to conventional fixed-parameter control methods. The findings also show a reduction in mechanical stress on system components, leading to enhanced operational reliability and longer system lifespan. Furthermore, the MPPT control system exhibits robust performance across a range of wave frequencies and amplitudes, maintaining efficiency even under low-energy and irregular wave conditions. The proposed control approach is compatible with existing OWC platforms and can be implemented with minimal structural modifications, making it a scalable and cost-effective solution for advancing the commercial viability of ocean wave energy systems. The results underscore the importance of adaptive control in optimizing renewable energy harvesting from marine environments.