Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mariana-Liliana Păcală has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Longitudinal Multi-Batch Characterisation of Beer Wort Fermentation Foam Using Image-Based Semantic Segmentation

    by Anca Sipos, Otto Ketney, Mariana-Liliana Păcală, Romulus Iagarau

    Image-derived descriptors of fermentation foam may complement conventional brewing-process measurements, but they require evaluation at the level of independent fermentation batches. We derived image-based estimates of foam height and foam-free exposed area from hourly images of 12 beer wort fermentations conducted at initial extract levels of 12, 15 and 18 °P, and analysed 1147 hourly observations together with synchronised pH, temperature and dissolved-oxygen records. Foam was segmented with convolutional encoder–decoder networks trained separately for each fermentation, using 223 annotated frames overall (19.4% of the 1147 acquired frames; 14–24 frames per batch), all acquired within the first 72 h. Because hourly frames were nested within fermentation batches, observation-level correlations were treated as exploratory. In a batch-aware sensitivity analysis based on 70 batch-by-window means, linear mixed-effects models with batch as a random intercept identified an effect of operational time window on foam height (F(5, 53.10) = 72.17; p < 0.001) and on foam-free exposed area (F(5, 62.00) = 80.57; p < 0.001), whereas an effect of initial extract level was not detected (p = 0.520 and p = 0.404, respectively). Mean window-specific foam height was highest at 43.37 ± 12.80 mm in the >10–18 h window, and pH declined monotonically from 4.69 to 3.94. Within each fermentation, the annotated frames were partitioned at frame level into a training and a validation subset only, with no held-out test subset and no pooled model; the class-wise evaluation recorded for nine of these per-batch models gave a mean intersection-over-union of 0.190 ± 0.077 across the classes each model used (six in eight cases, five in one) and 0.371 ± 0.226 for the foam class, so segmentation accuracy on fermentations unseen during training was not established. The 307 observations recorded beyond 72 h (26.8% of the dataset) lie outside the annotated temporal domain. The findings support the proof-of-concept feasibility of longitudinal, image-based foam characterisation under controlled laboratory conditions but do not establish absolute measurement accuracy, generalisation to fermentations unseen during training, or readiness for process-control deployment. The semantic-segmentation component was used as an image-analysis instrument for extracting longitudinal foam descriptors rather than as a newly proposed segmentation architecture. In a targeted experiment on a fixed batch-level partition, with three complete fermentations withheld for testing, replacing class-weighted cross-entropy with an asymmetric Tversky loss raised foam recall on sparse-foam frames from 0.074 to 0.318 without any change to the network architecture, whereas the tested attention-gated configuration, which adds skip connections and attention gates together, did not improve foam segmentation under weighted cross-entropy. Accordingly, the methodological contribution of the study resides in the longitudinal multi-batch acquisition design, integration of image-derived descriptors with synchronised physicochemical measurements, and batch-aware analysis of repeated fermentation observations. The present data do not establish architectural superiority, segmentation generalisation to unseen fermentations, or a technical advance in semantic-segmentation methodology.

  • Open Access

    Fuzzy Logic-Based Optimization for Pseudocereal Processing: A Case Study on Buckwheat

    by Mariana-Liliana Păcală, Anca Șipoș, Otto Ketney, Alexandrina Sîrbu

    In response to the increasing consumer interest in the health benefits of plant-based foods, in this study, fuzzy logic modeling (FLM) was used to optimize the lactic fermentation process of several buckwheat (Fagopyrum esculentum)-based substrates (B-bSs), which were bio-prospected for the development of pseudocereal-based fermented foodstuffs. The experimental methodology involved obtaining B-bSs, either green or roasted, under various milling conditions and subjecting them to two different types of thermal treatment. This experimental design allowed us to obtain a set of experimental data, based on which a fuzzy system was developed and calibrated. The main physicochemical characteristics (pH, total titratable acidity, dynamic viscosity, and color) and sensory attributes (appearance, color, aroma, taste, texture or mouthfeel, and overall acceptability) of B-bSs were evaluated. The fuzzy logic approach proved useful for monitoring the evolution of lactic fermentation and for the rapid and accurate identification of situations that require technological interventions, acting as a reliable tool for the ongoing optimization of fermentation processes. Our study’s results showed that the optimal technological variants identified using FLM corresponded to green buckwheat milled with a 0.12 mm gap disk and a hammer mill and subjected to ultrasonic water bath treatment. The hedonic descriptive sensory evaluation also validated this conclusion.


  • USE OF WHITE, RED, AND BLACK QUINOA IN UNCONVENTIONAL BREWING MASH MATRICES - A TECHNOLOGICAL APPROACH

    by Mariana-Liliana Păcală, Anca Șipoș

    The growing demand for gluten-free, low- and nonalcoholic beer, has led to increased research into the incorporation of nontraditional cereal substrates in the brewing process, such as the pseudocereal quinoa (Chenopodium quinoa, Willd.). This study investigates the brewing potential of three quinoa varieties - white, red, and black - as adjuncts for the development of health-oriented and diversifying beer assortments. Three unconventional quinoa-based mashes were formulated using Pilsner barley malt, quinoa varieties, and acid barley malt at proportions of 54:40:6 % (w·w-1). The ratio of cereal ingredients to mashing water was 1:4.5. The mashing protocol involved a stepwise temperature increase of 1 °C·min-1, with rests at 45 °C for 30 minutes, 63 °C for 20 minutes, 72 °C for 30 minutes, and 78 °C for 10 minutes. Boiled malt worts with Amarillo hop pellets for 30BU were fermented with lager and top yeasts culture. The mashing, lautering, and fermentation performance of the purpose quinoabased brewing matrices were briefly monitored according to the Analytica- EBC methods. The results demonstrated that the studied quinoa varieties could represent alternative substrates to conventional brewing mashes and revealed distinct technological characteristics and varying brewing behaviors among the quinoa varieties, indicating that each variety may influence the brewing process differently.

  • Open Access

    Non-Conventional Brewers’ Spent Grains, an Alternative Raw Material in Bread-Making

    by Mariana-Liliana Păcală, Alexandrina Sîrbu, Anca Șipoș

    The main objective of this experiment was to investigate the technological potential of upcycling unsparged non-conventional brewers’ spent grains (BSGs) in bread-making and assess the comparative quality of bread enriched with non-fermented and lactic acid-fermented BSGs obtained from mashes brewed with starch adjuncts of buckwheat and oats. After the runoff of the first wort, unsparged non-conventional BSGs with approximately 75% moisture, acidic pH, and yield in the soluble extract above 56.6% (w/w d.m.) were used in substituting wheat flour with 5 and 15% (w/w d.m.) in bread-making recipes. The highest loaf volume value (318.68 cm3/100 g) was observed for 5% fermented buckwheat-BSG addition. Except for the samples with 5% fermented BSGs, specific volumes decreased. Crumb moisture was reduced by up to 22% for all samples, with this parameter related to bread weight. Bread porosity, elasticity, acidity, and overall sensory acceptability were better for fermented than non-fermented BSGs. The results proved that non-conventional BSGs with buckwheat and oats addition have the potential to be valorized in new bread assortments, and lactic acid fermentation applied to the BSGs is beneficial, even for overall sensory acceptability and quality of baked end-products. Technological, buckwheat-BSG was more convenient than oats-BSG. Further research continues to optimize and upscale Technology Readiness Levels.


  • Open Access

    Teaching in Higher Education: Students’ Deep Learning of Brewing by Labwork

    by Mariana-Liliana Păcală, Anca Sorina Șipoş, Lucica Brudiu, Lidia Favier

    The amount of theoretical and practical information to be given to students from engineering food specialty is increasingly greater. Within this perspective, it is important to use teaching-learning methods which to develop students’ cognitive ability through the efficient by of them of knowledge acquired at fundamental and specialized disciplines. The article aims to present in an integrated graphical manner the laboratory entitled “Determination of alcoholic concentration of beer by distillation” within the discipline of “Technology and control in the malt and beer industry” that is taught to students in the field of Food Engineering. The integrative approach to the laboratory theme is based on the generation of a graphical organization of the laboratory work content, thus enabling an efficient guidance of the teaching-learning process. On the same structure of the graphical organization of laboratory work are processed and interpreted experimental results, resulting in students’ deep learning of brewing by laboratory work. In conclusion, the use of integrated graphical manner in the teaching of laboratory work allowed students to achieve much better results in the assessment of laboratory activity, to find an improvement in self-organizing and self-evolving and to be more confident about the scientific research activity.

  • Open Access

    Simulation-Based Learning, an Essential Tool for Control Process in Food Engineering Education

    by Anca Şipoş, Mariana Liliana Păcală

    Simulation-based learning has become an essential tool for food engineers in education and industry. The students from food engineering higher education usually have difficulties to understand abstract concepts of the process control, to make links among microbiology, biochemistry and automation of the technological process from food industry. The present paper describes a methodology for teaching the process control by developing a control level process using simulation-based learning. The used of this metode highlighted that the students developed competence toward “thinking like a scientist”, developed argumentation and critical decision-making skills and reinforced research-planning and experimental design skills.


  • Open Access

    Teaching process control in food engineering: dynamic simulation of a fermentation control process

    by Anca Şipoș, Mariana Liliana Păcală

    Students usually have difficulties to understand abstract concepts of process control. Implementing in teaching process the inquiry-based learning helps students to follow methods and practices similar to those of professional scientists in order to construct knowledge. The paper describes the steps reached in simulation-based learning: from experimental data obtained by the students in their practical method (study and measurement of variables to some fermentation processes) to the simulated the behaviour of the process under a feedback control system. By providing opportunities for students to check their understanding and reflect on their learning process performance is enhanced over a traditional lecture course.