Michael D. Silver
Research Subjects
Michael D. Silver has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Alexander A. Zamyatin
Toshiba
2 shared publications - Satoru Nakanishi
Toshiba Medical Systems Corporation, Otawara-shi, Tochigi, Japan
2 shared publications - Alexander Katsevich
Department of Mathematics, University of Central Florida, Orlando, FL 32816-1364, USA
1 shared publication - Ilmar A. Hein
Bio-Imaging Research, Inc., 425 Barclay Boulevard, Lincolnshire, Illinois 60069, USA
1 shared publication - Ilmar A. Hein
Toshiba Medical Research Institute USA, Vernon Hills, IL 60061, USA
1 shared publication Issei Mori
Toshiba Medical Engineering Corp. (Japan)
1 shared publication
Latest Publications
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 4 (10823654) , 2293-2295
Up-sampling with Shift Method for Windmill Correction
We suggest a simple and efficient approach to reduce, and, in some cases, eliminate the windmill artifact. Our method does not require hardware changes. The idea is to improve the z-sampling by applying up-sampling in the detector row direction. One recent result show that the linear interpolation can be improved by shifting the samples by some small amount; we utilize this approach for our purposes. Evaluation shows that using some specified amount of the shift in interpolation, the proposed method provides a significant improvement of the windmill artifact with the clinical data, without a noticeable loss of z-resolution.
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 4 (10823654) , 2293-2295
Up-sampling with Shift Method for Windmill Correction
We suggest a simple and efficient approach to reduce, and, in some cases, eliminate the windmill artifact. Our method does not require hardware changes. The idea is to improve the z-sampling by applying up-sampling in the detector row direction. One recent result show that the linear interpolation can be improved by shifting the samples by some small amount; we utilize this approach for our purposes. Evaluation shows that using some specified amount of the shift in interpolation, the proposed method provides a significant improvement of the windmill artifact with the clinical data, without a noticeable loss of z-resolution.
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 4, 2264-2267
Helical CT Reconstruction with Large Cone Angle
In this work we suggest ways to incorporate redundant data into reconstruction for a range of helical pitches from 1-PI to 3-PI. For evaluation we use simulated data and real 256-slice anthropomorphic phantom data. With large cone angle reconstruction is very sensitive to the exactness of the algorithm.
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 4, 2264-2267
Helical CT Reconstruction with Large Cone Angle
In this work we suggest ways to incorporate redundant data into reconstruction for a range of helical pitches from 1-PI to 3-PI. For evaluation we use simulated data and real 256-slice anthropomorphic phantom data. With large cone angle reconstruction is very sensitive to the exactness of the algorithm.
- 16 May 2003
- Published by SPIE-Intl Soc Optical Eng
- Vol. 5032, 1901-1911
Tilted helical Feldkamp cone-beam reconstruction algorithm for multislice CT
In many clinical applications, it is necessary to tilt the gantry of an X-ray CT system with respect to the patient. Tilting the gantry introduces no complications for single-slice fan-beam systems; however, most systems today are helical multislice systems with up to 16 slices (and this number is sure to increase in the future). The image reconstruction algorithms used in multislice helical CT systems must be modified to compensate for the tilt. If they are not, the quality of reconstructed images will be poor with the presence of significant artifacts produced by the tilt. Practical helical multislice algorithms currently incorporated in today’s systems include helical fan-beam, ASSR (Advanced single-slice rebinning), and Feldkamp algorithms. This paper presents the modifications necessary to compensate for gantry tilt for the helical cone-beam Feldkamp algorithm implemented by Toshiba (referred to as TCOT for true cone-beam tomography). Unlike some of the other algorithms, gantry tilt compensation is simple and straightforward to implement with no significant increase in computational complexity. It will be shown that the effect of the gantry tilt is to introduce a lateral shift in the isocenter of the reconstructed slice of interest, which is a function of the tilt, couch speed, and view angle. This lateral shift is easily calculated and incorporated into the backprojection algorithm. The tilt-compensated algorithm is called T-TCOT. Experimental tilted-gantry data has been obtained with 8- and 16 slice Toshiba Aquilion systems, and examples of uncompensated and tilt compensated images are presented.
- 16 May 2003
- Published by SPIE-Intl Soc Optical Eng
- Vol. 5032, 1901-1911
Tilted helical Feldkamp cone-beam reconstruction algorithm for multislice CT
In many clinical applications, it is necessary to tilt the gantry of an X-ray CT system with respect to the patient. Tilting the gantry introduces no complications for single-slice fan-beam systems; however, most systems today are helical multislice systems with up to 16 slices (and this number is sure to increase in the future). The image reconstruction algorithms used in multislice helical CT systems must be modified to compensate for the tilt. If they are not, the quality of reconstructed images will be poor with the presence of significant artifacts produced by the tilt. Practical helical multislice algorithms currently incorporated in today’s systems include helical fan-beam, ASSR (Advanced single-slice rebinning), and Feldkamp algorithms. This paper presents the modifications necessary to compensate for gantry tilt for the helical cone-beam Feldkamp algorithm implemented by Toshiba (referred to as TCOT for true cone-beam tomography). Unlike some of the other algorithms, gantry tilt compensation is simple and straightforward to implement with no significant increase in computational complexity. It will be shown that the effect of the gantry tilt is to introduce a lateral shift in the isocenter of the reconstructed slice of interest, which is a function of the tilt, couch speed, and view angle. This lateral shift is easily calculated and incorporated into the backprojection algorithm. The tilt-compensated algorithm is called T-TCOT. Experimental tilted-gantry data has been obtained with 8- and 16 slice Toshiba Aquilion systems, and examples of uncompensated and tilt compensated images are presented.