Musaida Mercy Manyuchi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Musaida Mercy Manyuchi has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
C. Mbohwa
Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
4 shared publications- Charles Mbohwa
Centre for Sustainability Engineering and Future Technologies, College of Science, Engineering and Technology, University of South Africa, Johannesburg 1709, South Africa
4 shared publications - Nita Sukdeo
University of Johannesburg
4 shared publications W. Stinner
4 shared publicationsCharles Mbohwa
Sustainable Technology Environmental Management Company, Harare, Zimbabwe
3 shared publicationsEdison Muzenda
3 shared publications
Latest Publications
- Open Access
- 26 August 2026
- Published by MDPI AG in Environmental and Earth Sciences Proceedings
- Vol. 42 (1) , 26
The Impacts of Producing Bio-Briquettes Made from Organic Waste as an Alternative Source of Fuel
This work investigates the potential benefits of using bio-briquettes made from organic waste as an alternative source of fuel in sub-Saharan Africa. Over 80 million tons of organic waste are generated annually in the region. Our pilot case study in Zimbabwe processed mixed feedstocks sawdust, rice husks, groundnut shells, and bagasse using optimized parameters: drying at 105 °C to 3, and a sulfur content of 2e) per ton of fuel displaced, while maintaining a near carbon-neutral lifecycle. This study confirms that valorizing organic waste into bio-briquettes provides a cleaner, economically viable alternative to fossil fuels, contributing to climate change mitigation, improved waste management, and sustainable development across the region.
- 26 August 2026
- Published by MDPI AG in Environmental and Earth Sciences Proceedings
- Vol. 42 (1) , 26
Open AccessThe Impacts of Producing Bio-Briquettes Made from Organic Waste as an Alternative Source of Fuel
This work investigates the potential benefits of using bio-briquettes made from organic waste as an alternative source of fuel in sub-Saharan Africa. Over 80 million tons of organic waste are generated annually in the region. Our pilot case study in Zimbabwe processed mixed feedstocks sawdust, rice husks, groundnut shells, and bagasse using optimized parameters: drying at 105 °C to 3, and a sulfur content of 2e) per ton of fuel displaced, while maintaining a near carbon-neutral lifecycle. This study confirms that valorizing organic waste into bio-briquettes provides a cleaner, economically viable alternative to fossil fuels, contributing to climate change mitigation, improved waste management, and sustainable development across the region.
- Open Access
- 18 April 2026
- Published by Elsevier in Carbon Trends
- Vol. 23
A critical assessment of potential to use sewage sludge derived biochar in wastewater treatment
- 18 April 2026
- Published by Elsevier in Carbon Trends
- Vol. 23
Open AccessA critical assessment of potential to use sewage sludge derived biochar in wastewater treatment
- Open Access
- 4 March 2026
- Published by MDPI AG in Environmental and Earth Sciences Proceedings
- Vol. 42 (1) , 20
Vermicomposting Technology as an Environmental Preservation Strategy in Sub-Saharan Africa
In the urban and peri-urban areas across Sub-Saharan Africa, rapid urbanization, population growth and changes in consumer behavior have resulted in large volumes of biodegradable waste, most of which is disposed of through open dumping and landfilling. These practices contribute to greenhouse gas emissions, contamination of water bodies and declining soil productivity. This research assesses the impact of vermicomposting technology for the production of biofertilizers on the environment in Sub-Saharan Africa, with a focus on its role in sustainable waste management, soil health restoration and environmental resilience. Vermicomposting is the biological conversion of organic waste into nutrient-rich vermicompost and vermiwash using earthworms as catalysts. The process is low-cost, decentralized and appropriate for rural and urban setups. This research embraces a mixed methods approach, based on field observations, compost and soil analysis, structured interviews with farmers and waste managers and policy document reviews from case studies in South Africa, Kenya and Ghana. The results showed that vermicomposting reduced organic waste volumes by 50–60%, decreased manure pH from 8.5 to 7.0 and increased NPK concentrations by 50%, demonstrating its effectiveness as a waste stabilization technology. Regardless of ecological advantages, implementation is still minimal owing to policy gaps, limited technical skills and inadequate institutional backing. This study shows how waste can be turned into useful resources, supports efforts to restore damaged land and points out policy issues that slow down progress. It concludes that vermicomposting technology holds significant potential to improve environmental quality and promote sustainability in Sub-Saharan Africa. Scaling its impact will require integration into national policies, investment in education and community engagement and incentives for decentralized implementation. This approach can foster greener and more resilient communities across the region.
- 4 March 2026
- Published by MDPI AG in Environmental and Earth Sciences Proceedings
- Vol. 42 (1) , 20
Open AccessVermicomposting Technology as an Environmental Preservation Strategy in Sub-Saharan Africa
In the urban and peri-urban areas across Sub-Saharan Africa, rapid urbanization, population growth and changes in consumer behavior have resulted in large volumes of biodegradable waste, most of which is disposed of through open dumping and landfilling. These practices contribute to greenhouse gas emissions, contamination of water bodies and declining soil productivity. This research assesses the impact of vermicomposting technology for the production of biofertilizers on the environment in Sub-Saharan Africa, with a focus on its role in sustainable waste management, soil health restoration and environmental resilience. Vermicomposting is the biological conversion of organic waste into nutrient-rich vermicompost and vermiwash using earthworms as catalysts. The process is low-cost, decentralized and appropriate for rural and urban setups. This research embraces a mixed methods approach, based on field observations, compost and soil analysis, structured interviews with farmers and waste managers and policy document reviews from case studies in South Africa, Kenya and Ghana. The results showed that vermicomposting reduced organic waste volumes by 50–60%, decreased manure pH from 8.5 to 7.0 and increased NPK concentrations by 50%, demonstrating its effectiveness as a waste stabilization technology. Regardless of ecological advantages, implementation is still minimal owing to policy gaps, limited technical skills and inadequate institutional backing. This study shows how waste can be turned into useful resources, supports efforts to restore damaged land and points out policy issues that slow down progress. It concludes that vermicomposting technology holds significant potential to improve environmental quality and promote sustainability in Sub-Saharan Africa. Scaling its impact will require integration into national policies, investment in education and community engagement and incentives for decentralized implementation. This approach can foster greener and more resilient communities across the region.
- Open Access
- 1 January 2026
- Published by Maximum Academic Press in Biochar X
- Vol. 2 (1)
A laboratory-scale performance assessment for treatment of groundwater using a combined biochar–vermifiltration/vermicompost system
Groundwater contaminated with heavy metals such as chromium (Cr), arsenic (As), lead (Pb), and cadmium (Cd) poses major environmental and public health challenges. This study evaluated the potential of an integrated biochar–vermifiltration/vermicomposting system for removing heavy metals from contaminated groundwater. Sewage sludge-derived biochar was used as the primary adsorbent, while vermifiltration provided secondary biological treatment through earthworm and microbial activity. Initial groundwater analysis indicated high levels of 0.18 ± 0.02 mg/L Pb, 0.06 ± 0.01 mg/L Cd, 0.21 ± 0.03 mg/L Cr, and 0.09 ± 0.01 mg/L As. Eisenia fetida-infused vermifiltration systems enhanced microbial activity, aeration, and organic matter stabilization. Biochar treatment achieved removal efficiencies of 62%–70%, while vermifiltration alone achieved approximately 70% for all heavy metals. The combined biochar-vermifiltration system achieved removal efficiencies of 94.4% for Pb, 91.7% for Cd, 92.9% for Cr, and 91.1% for As, with final concentrations of 0.010 ± 0.002 mg/L Pb, 0.005 ± 0.001 mg/L Cd, 0.015 ± 0.002 mg/L Cr, and 0.008 ± 0.001 mg/L As. The treated water met World Health Organization (WHO) drinking water guidelines for Pb, Cr, and As. However, the final Cd concentration of 0.005 mg/L exceeded the WHO guideline of 0.003 mg/L. Significant reductions were also observed, including a 92% reduction in turbidity, a 68% reduction in total dissolved solids, and a 75% reduction in chemical oxygen demand. One-way ANOVA (p < 0.05) confirmed that the combined system significantly outperformed individual treatments. Integrating adsorption and biological processes delivered synergistic benefits for the biochar-vermifiltration system, aligning with circular economy principles.
- 1 January 2026
- Published by Maximum Academic Press in Biochar X
- Vol. 2 (1)
Open AccessA laboratory-scale performance assessment for treatment of groundwater using a combined biochar–vermifiltration/vermicompost system
Groundwater contaminated with heavy metals such as chromium (Cr), arsenic (As), lead (Pb), and cadmium (Cd) poses major environmental and public health challenges. This study evaluated the potential of an integrated biochar–vermifiltration/vermicomposting system for removing heavy metals from contaminated groundwater. Sewage sludge-derived biochar was used as the primary adsorbent, while vermifiltration provided secondary biological treatment through earthworm and microbial activity. Initial groundwater analysis indicated high levels of 0.18 ± 0.02 mg/L Pb, 0.06 ± 0.01 mg/L Cd, 0.21 ± 0.03 mg/L Cr, and 0.09 ± 0.01 mg/L As. Eisenia fetida-infused vermifiltration systems enhanced microbial activity, aeration, and organic matter stabilization. Biochar treatment achieved removal efficiencies of 62%–70%, while vermifiltration alone achieved approximately 70% for all heavy metals. The combined biochar-vermifiltration system achieved removal efficiencies of 94.4% for Pb, 91.7% for Cd, 92.9% for Cr, and 91.1% for As, with final concentrations of 0.010 ± 0.002 mg/L Pb, 0.005 ± 0.001 mg/L Cd, 0.015 ± 0.002 mg/L Cr, and 0.008 ± 0.001 mg/L As. The treated water met World Health Organization (WHO) drinking water guidelines for Pb, Cr, and As. However, the final Cd concentration of 0.005 mg/L exceeded the WHO guideline of 0.003 mg/L. Significant reductions were also observed, including a 92% reduction in turbidity, a 68% reduction in total dissolved solids, and a 75% reduction in chemical oxygen demand. One-way ANOVA (p < 0.05) confirmed that the combined system significantly outperformed individual treatments. Integrating adsorption and biological processes delivered synergistic benefits for the biochar-vermifiltration system, aligning with circular economy principles.
- Open Access
- 2 July 2025
- Published by Elsevier in South African Journal of Chemical Engineering
- Vol. 54, 29-43
An analysis of effect of temperature and pressure on bio pellets physicochemical properties
- 2 July 2025
- Published by Elsevier in South African Journal of Chemical Engineering
- Vol. 54, 29-43
Open AccessAn analysis of effect of temperature and pressure on bio pellets physicochemical properties
- Open Access
- 26 December 2023
- Published by IEOM Society International
Valorisation of Piggery Sludge to Biogas to Bio-Solids Through Anaerobic Digestion
The potential to recover biogas and bio solids from piggery sludge was investigated as a waste management technique. Three 1L bio digesters were loaded with piggery slurry and anaerobic digestion took place over a period of 35 days under mesophilic conditions of 35 ±1 ◦C. The piggery sludge properties which included pH, total solids (TS), chemical oxygen demand (COD), biogas and bio solids compositions were measured using standard techniques. MATLAB R2013a was used for determination of the linear models for changes in COD, TS, pH and amount of biogas generated at 95% confidence interval. The R2 and the SSE were used to determine the accuracy of the derived models. As the digestion period increased the sludge total solids content and chemical oxygen demand decreased by 80% and 90% respectively. Cumulative biogas of approximately 4 L/day was achieved with a peak at 30 days. The biogas produced had a methane composition of 65%. Accurate models with R2 values of >0.9 can be used to determine the changes in the given parameters during biogas production. Anaerobic digestate was harnessed with an average of 4.2% nitrogen, 0.5% phosphorous and 4.7% potassium.
- 26 December 2023
- Published by IEOM Society International
Open AccessValorisation of Piggery Sludge to Biogas to Bio-Solids Through Anaerobic Digestion
The potential to recover biogas and bio solids from piggery sludge was investigated as a waste management technique. Three 1L bio digesters were loaded with piggery slurry and anaerobic digestion took place over a period of 35 days under mesophilic conditions of 35 ±1 ◦C. The piggery sludge properties which included pH, total solids (TS), chemical oxygen demand (COD), biogas and bio solids compositions were measured using standard techniques. MATLAB R2013a was used for determination of the linear models for changes in COD, TS, pH and amount of biogas generated at 95% confidence interval. The R2 and the SSE were used to determine the accuracy of the derived models. As the digestion period increased the sludge total solids content and chemical oxygen demand decreased by 80% and 90% respectively. Cumulative biogas of approximately 4 L/day was achieved with a peak at 30 days. The biogas produced had a methane composition of 65%. Accurate models with R2 values of >0.9 can be used to determine the changes in the given parameters during biogas production. Anaerobic digestate was harnessed with an average of 4.2% nitrogen, 0.5% phosphorous and 4.7% potassium.
- Open Access
- 24 May 2023
- Published by IEOM Society International
- p. 2833-2846
Techno-Economic Assessment for Geothermal Energy in Zimbabwe
Geothermal energy has potential to be used as a clean renewable energy source to power the nation. This study evaluates the techno-economic assessment for setting up a 10-megawatt (MW) geothermal electricity based plant in Lubimbi, Zimbabwe. Neohexane was chosen as the conversion organic fluid of geothermal brine to geothermal electricity at 73 ℃. A total investment of approximately USD 40 million is required to establish the 10 MW plant with a plant life of 30 years. An off-taker tariff of USD 0.14/kwh against a leveled cost of production of USD0.08 was proposed. A rate of return of 3.2% and a payback period of 7 years was achieved. The proposed development will contribute 0.5% to the energy requirements in the country.
- 24 May 2023
- Published by IEOM Society International
- p. 2833-2846
Open AccessTechno-Economic Assessment for Geothermal Energy in Zimbabwe
Geothermal energy has potential to be used as a clean renewable energy source to power the nation. This study evaluates the techno-economic assessment for setting up a 10-megawatt (MW) geothermal electricity based plant in Lubimbi, Zimbabwe. Neohexane was chosen as the conversion organic fluid of geothermal brine to geothermal electricity at 73 ℃. A total investment of approximately USD 40 million is required to establish the 10 MW plant with a plant life of 30 years. An off-taker tariff of USD 0.14/kwh against a leveled cost of production of USD0.08 was proposed. A rate of return of 3.2% and a payback period of 7 years was achieved. The proposed development will contribute 0.5% to the energy requirements in the country.
- Open Access
- 16 May 2023
- Published by IEOM Society International
- Vol. 12 (1)
Environmental Impact Assessment for an Optometry Manufacturing Industry
The optometry waste being generated from the optometry industry under study includes cutting, smoothing and polishing waste. During the glass smoothing and polishing stage the liquid has a pH of 11.80 and 11.05 respectively. This basic pH can be neutralized by adding a mineral acid like sulphuric acid. The plastic glass smoothing stage produces acidic liquid waste of around 4.70. This pH can be neutralized by adding calcium hydroxide before disposal into the municipal system. The optometry waste had high solids content ranging from 0.8-10.1 g/L and these must be filtered off and disposed off safely in metal containers or plastics. A proper environmental management plan must include proper record keeping, training of personnel and managing of multi-hazardous waste.
- 16 May 2023
- Published by IEOM Society International
- Vol. 12 (1)
Open AccessEnvironmental Impact Assessment for an Optometry Manufacturing Industry
The optometry waste being generated from the optometry industry under study includes cutting, smoothing and polishing waste. During the glass smoothing and polishing stage the liquid has a pH of 11.80 and 11.05 respectively. This basic pH can be neutralized by adding a mineral acid like sulphuric acid. The plastic glass smoothing stage produces acidic liquid waste of around 4.70. This pH can be neutralized by adding calcium hydroxide before disposal into the municipal system. The optometry waste had high solids content ranging from 0.8-10.1 g/L and these must be filtered off and disposed off safely in metal containers or plastics. A proper environmental management plan must include proper record keeping, training of personnel and managing of multi-hazardous waste.
- Open Access
- 20 April 2023
- Published by IEOM Society International
- Vol. 12 (4)
Production of Bio Fertilizer from Blending Coal Fly Ash and Vermicompost
This work focused on the evaluation of the potential to produce a bio fertilizer from the blending of vermicompost and leached coal fly ash. A blended bio fertilizer with nitrogen (3.8-4.8%), phosphorous (3.3-4.5%) and potassium (3.7-6.2%) was produced. The use of vermicompost fertilizer for blending will stabilize fly ash and give it novel properties that make it comparable to the generic chemical fertilizers.
- 20 April 2023
- Published by IEOM Society International
- Vol. 12 (4)
Open AccessProduction of Bio Fertilizer from Blending Coal Fly Ash and Vermicompost
This work focused on the evaluation of the potential to produce a bio fertilizer from the blending of vermicompost and leached coal fly ash. A blended bio fertilizer with nitrogen (3.8-4.8%), phosphorous (3.3-4.5%) and potassium (3.7-6.2%) was produced. The use of vermicompost fertilizer for blending will stabilize fly ash and give it novel properties that make it comparable to the generic chemical fertilizers.
- Open Access
- 7 April 2023
- Published by IEOM Society International
- Vol. 12 (7) , 2415-2430
An Assessment of the Potential to Recover Gold from E-waste as a Waste Management Initiative
This study evaluated the potential to extract gold from e-waste mainly focusing on printed circuit boards (PCBs). Ewaste was first separated physically and then went through dissolution. Cyanide leaching and Aqua Regia leaching using various precipitating reagents such as zinc (Zn), aluminum (Al), Na 2 S 2 O 5 , FeSO 4 , NaBH 4 on Zn and NaBH 4 on Al. The process was conducted at pH of 11.8 and 12.4. Gold extracted through cyanidation leaching with NaBH 4 on Zn precipitation resulted in gold extraction of 99.0% in comparison to leaching with Aqua Regia with NaBH 4 on Zn precipitation to yield gold content of 91.9%. The e-waste processing plant was assumed to process 20000 tons per annum of PCBs with a gold yield of 1.4 tons and total power requirement of almost 203 000 KWhr. A total capital investment of USD 15 million was required with a payback period of 1.04 years and a return on investment of 0.96. E-waste can be utilized as a raw material to recover precious metals.
- 7 April 2023
- Published by IEOM Society International
- Vol. 12 (7) , 2415-2430
Open AccessAn Assessment of the Potential to Recover Gold from E-waste as a Waste Management Initiative
This study evaluated the potential to extract gold from e-waste mainly focusing on printed circuit boards (PCBs). Ewaste was first separated physically and then went through dissolution. Cyanide leaching and Aqua Regia leaching using various precipitating reagents such as zinc (Zn), aluminum (Al), Na 2 S 2 O 5 , FeSO 4 , NaBH 4 on Zn and NaBH 4 on Al. The process was conducted at pH of 11.8 and 12.4. Gold extracted through cyanidation leaching with NaBH 4 on Zn precipitation resulted in gold extraction of 99.0% in comparison to leaching with Aqua Regia with NaBH 4 on Zn precipitation to yield gold content of 91.9%. The e-waste processing plant was assumed to process 20000 tons per annum of PCBs with a gold yield of 1.4 tons and total power requirement of almost 203 000 KWhr. A total capital investment of USD 15 million was required with a payback period of 1.04 years and a return on investment of 0.96. E-waste can be utilized as a raw material to recover precious metals.