Sheng Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sheng Xu has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Yun Ye
Fuzhou University
9 shared publications - Enguo Chen
Fuzhou University
7 shared publications - Qun Yan
College of Physics and Information Engineering of Fuzhou University Fuzhou Fujian People's Republic of China
4 shared publications - Tailiang Guo
Fuzhou Univ, Inst Optoelect Display, Fuzhou 350002, Peoples R China
4 shared publications - Tailiang Guo
College of Physics and Information Engineering, Fuzhou University, Fuzhou, China
3 shared publications Enguo Chen
National and Local United Engineering Laboratory of Flat Panel Display Technology, College of Physics and Information Engineering, Fuzhou University, Fuzhou 350116, China
2 shared publications
Latest Publications
- Open Access
Tripling Optical Efficiency of Pancake Optics for Virtual Reality Displays
The pancake structure is the mainstream optical solution for virtual reality (VR) displays due to its compact, folded optical path. However, only a small portion of the light can pass through the pancake optical engine because the incident light has to be polarized and directed to the half mirror (HM) twice. In order to improve the optical efficiency, a new pancake optical engine is proposed for VR display, which employs a diffractive deflection film (DDF) with different focal lengths in three regions and two cholesteric liquid crystal (CLC) lenses that respond to circularly polarized light. The CLC lenses are modeled, and their polarization response characteristics are verified. The pancake system is simulated and optimized in terms of image quality and evaluated for optical efficiency, achieving 2.86 times the optical efficiency of the conventional pancake system, and the root mean square (RMS) radius of the system is controlled within 19 μm, and the modulation transfer function (MTF) at the cut-off frequency is greater than 0.2. The results indicate that this structure has great potential in the VR display field.
Open AccessTripling Optical Efficiency of Pancake Optics for Virtual Reality Displays
The pancake structure is the mainstream optical solution for virtual reality (VR) displays due to its compact, folded optical path. However, only a small portion of the light can pass through the pancake optical engine because the incident light has to be polarized and directed to the half mirror (HM) twice. In order to improve the optical efficiency, a new pancake optical engine is proposed for VR display, which employs a diffractive deflection film (DDF) with different focal lengths in three regions and two cholesteric liquid crystal (CLC) lenses that respond to circularly polarized light. The CLC lenses are modeled, and their polarization response characteristics are verified. The pancake system is simulated and optimized in terms of image quality and evaluated for optical efficiency, achieving 2.86 times the optical efficiency of the conventional pancake system, and the root mean square (RMS) radius of the system is controlled within 19 μm, and the modulation transfer function (MTF) at the cut-off frequency is greater than 0.2. The results indicate that this structure has great potential in the VR display field.
- Open Access
Two-Step Performance Optimization of CsPbBr3 Perovskite Nanocrystals for Wide Color Gamut Displays
Owing to their composition-tunable and narrow emissions and high photoluminescence quantum yield (PLQY), inorganic halide perovskite quantum dots (IPQDs) are a promising option for wide color gamut displays. However, their practical applications have been limited by their lattice structure instability and surface defect states. Herein, CsPbBr3:KBF4@SiO2 with improved stability and optical properties is successfully synthesized with a two-step optimization of fluorine (F) anion doping and SiO2 in situ coating. Compared with bromide (Br), higher electronegativity and a smaller radius of F lead to stronger binding energy with Pb2+. Also, F anions can occupy surface Br vacancies. Then, benefiting from the acidic environment provided by BF4− hydrolysis, tetraethyl orthosilicate (TEOS) can be more easily hydrolyzed on the CsPbBr3:KBF4 surface to generate SiO2 coating, thus further passivating lattice defects and improving environmental stability. Importantly, the PLQY of CsPbBr3:KBF4@SiO2 achieves 85%, and the stability has been greatly improved compared with pure CsPbBr3. Finally, CsPbBr3:KBF4@SiO2/PDMS, CsPbI3/PDMS, and CsPbCl3/PDMS composites with narrow emissions are applied to replace traditional phosphors as color converters for direct-view light-emitting diode (LED) displays or liquid crystal display (LCD) backlights. The color gamut reaches 118.22% under the NTSC standard. Concerning the display field, it suggests likely applications in the future.
Open AccessTwo-Step Performance Optimization of CsPbBr3 Perovskite Nanocrystals for Wide Color Gamut Displays
Owing to their composition-tunable and narrow emissions and high photoluminescence quantum yield (PLQY), inorganic halide perovskite quantum dots (IPQDs) are a promising option for wide color gamut displays. However, their practical applications have been limited by their lattice structure instability and surface defect states. Herein, CsPbBr3:KBF4@SiO2 with improved stability and optical properties is successfully synthesized with a two-step optimization of fluorine (F) anion doping and SiO2 in situ coating. Compared with bromide (Br), higher electronegativity and a smaller radius of F lead to stronger binding energy with Pb2+. Also, F anions can occupy surface Br vacancies. Then, benefiting from the acidic environment provided by BF4− hydrolysis, tetraethyl orthosilicate (TEOS) can be more easily hydrolyzed on the CsPbBr3:KBF4 surface to generate SiO2 coating, thus further passivating lattice defects and improving environmental stability. Importantly, the PLQY of CsPbBr3:KBF4@SiO2 achieves 85%, and the stability has been greatly improved compared with pure CsPbBr3. Finally, CsPbBr3:KBF4@SiO2/PDMS, CsPbI3/PDMS, and CsPbCl3/PDMS composites with narrow emissions are applied to replace traditional phosphors as color converters for direct-view light-emitting diode (LED) displays or liquid crystal display (LCD) backlights. The color gamut reaches 118.22% under the NTSC standard. Concerning the display field, it suggests likely applications in the future.
- Open Access
- 21 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 15 (3) , 1
Corrections to “Tripling Light Conversion Efficiency of μLED Displays by Light Recycling Black Matrix”
In [1], the correction below is needed. The authors would like to apologize for any inconvenience caused.
- 21 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 15 (3) , 1
Open AccessCorrections to “Tripling Light Conversion Efficiency of μLED Displays by Light Recycling Black Matrix”
In [1], the correction below is needed. The authors would like to apologize for any inconvenience caused.
- Open Access
Zero-Optical-Distance Mini-LED Backlight with Cone-Shaped Light Coupling Microstructures
This paper presents a zero-optical-distance mini-LED backlight with cone-shaped light coupling microstructures to achieve an ultra-thin backlight architecture (~0.1 mm thickness) by combining the characteristics of direct-lit and edge-lit backlights. There is no gap between the light guide plate (LGP) and the reflector, as well as between the LGP and the mini-LED embedded in the reflector. The illuminance uniformity and light extraction efficiency (LEE) of the whole structure reach 91.47% and 77.09%, respectively. Nine sub-modules are spliced together to realize 2D local dimming with 0.29% crosstalk. The structure shows high optical performance while reducing the thickness of the backlight module, which is of great significance for the development of mini-LED backlights.
Open AccessZero-Optical-Distance Mini-LED Backlight with Cone-Shaped Light Coupling Microstructures
This paper presents a zero-optical-distance mini-LED backlight with cone-shaped light coupling microstructures to achieve an ultra-thin backlight architecture (~0.1 mm thickness) by combining the characteristics of direct-lit and edge-lit backlights. There is no gap between the light guide plate (LGP) and the reflector, as well as between the LGP and the mini-LED embedded in the reflector. The illuminance uniformity and light extraction efficiency (LEE) of the whole structure reach 91.47% and 77.09%, respectively. Nine sub-modules are spliced together to realize 2D local dimming with 0.29% crosstalk. The structure shows high optical performance while reducing the thickness of the backlight module, which is of great significance for the development of mini-LED backlights.
- Open Access
- 20 December 2022
- Published by MDPI AG in Nanomaterials
- Vol. 13 (1) , 17
Cs(Pb,Mn)Br3 Quantum Dots Glasses with Superior Thermal Stability for Contactless Electroluminescence Green−Emitting LEDs
CsPbX3 (X = Cl, Br or I) perovskite quantum dots (PQDs) have gained increasing interest due to their superior performance in photoelectric applications. In our work, a series of Mn2+ doped CsPbBr3 PQDs were successfully prepared in glasses by melt quenching and in situ crystallization technique. Due to the 4T1 (4G)→6A1 (6S) transition of Mn2+, a slight red shift from 510 nm to 516 nm was found, with the FWHM expansion from 18 nm to 26 nm. The PQDs@glasses showed excellent thermal stability, and the exciton binding energy reached a high level of 412 meV. The changes of the electronic structure after Mn doping CsPbBr3 can be demonstrated by first principles. Finally, a contactless electroluminescence device with the PQDs@glasses was designed based on the principle of electromagnetic induction, which is a potential application for detecting distance in sterile and dust−free environments.
- 20 December 2022
- Published by MDPI AG in Nanomaterials
- Vol. 13 (1) , 17
Open AccessCs(Pb,Mn)Br3 Quantum Dots Glasses with Superior Thermal Stability for Contactless Electroluminescence Green−Emitting LEDs
CsPbX3 (X = Cl, Br or I) perovskite quantum dots (PQDs) have gained increasing interest due to their superior performance in photoelectric applications. In our work, a series of Mn2+ doped CsPbBr3 PQDs were successfully prepared in glasses by melt quenching and in situ crystallization technique. Due to the 4T1 (4G)→6A1 (6S) transition of Mn2+, a slight red shift from 510 nm to 516 nm was found, with the FWHM expansion from 18 nm to 26 nm. The PQDs@glasses showed excellent thermal stability, and the exciton binding energy reached a high level of 412 meV. The changes of the electronic structure after Mn doping CsPbBr3 can be demonstrated by first principles. Finally, a contactless electroluminescence device with the PQDs@glasses was designed based on the principle of electromagnetic induction, which is a potential application for detecting distance in sterile and dust−free environments.
- Open Access
- 29 June 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (13) , 2243
Perovskite Quantum Dots for Emerging Displays: Recent Progress and Perspectives
The excellent luminescence properties of perovskite quantum dots (PQDs), including wide excitation wavelength range, adjustable emission wavelength, narrow full width at half maximum (FWHM), and high photoluminescence quantum yield (PLQY), highly match the application requirements in emerging displays. Starting from the fundamental structure and the related optical properties, this paper first introduces the existing synthesis approaches of PQDs that have been and will potentially be used for display devices, and then summarizes the stability improving approaches with high retention of PQDs’ optical performance. Based on the above, the recent research progress of PQDs in displays is further elaborated. For photoluminescent display applications, the PQDs can be embedded in the backlighting device or color filter for liquid crystal displays (LCD), or they may function as the color conversion layer for blue organic light-emitting diodes (OLED) and blue micro-scale light-emitting diodes (μLED). In terms of next-generation electroluminescent displays, notable progress in perovskite quantum-dot light emitting diodes (PeQLED) has been achieved within the past decade, especially the maximum external quantum efficiency (EQE). To conclude, the key directions for future PQD development are summarized for promising prospects and widespread applications in display fields.
- 29 June 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (13) , 2243
Open AccessPerovskite Quantum Dots for Emerging Displays: Recent Progress and Perspectives
The excellent luminescence properties of perovskite quantum dots (PQDs), including wide excitation wavelength range, adjustable emission wavelength, narrow full width at half maximum (FWHM), and high photoluminescence quantum yield (PLQY), highly match the application requirements in emerging displays. Starting from the fundamental structure and the related optical properties, this paper first introduces the existing synthesis approaches of PQDs that have been and will potentially be used for display devices, and then summarizes the stability improving approaches with high retention of PQDs’ optical performance. Based on the above, the recent research progress of PQDs in displays is further elaborated. For photoluminescent display applications, the PQDs can be embedded in the backlighting device or color filter for liquid crystal displays (LCD), or they may function as the color conversion layer for blue organic light-emitting diodes (OLED) and blue micro-scale light-emitting diodes (μLED). In terms of next-generation electroluminescent displays, notable progress in perovskite quantum-dot light emitting diodes (PeQLED) has been achieved within the past decade, especially the maximum external quantum efficiency (EQE). To conclude, the key directions for future PQD development are summarized for promising prospects and widespread applications in display fields.
- Open Access
- 28 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 12 (2) , 1-10
Stacked Encapsulation Structure for Discretely Distributed Quantum Dot Array
The performances of quantum-dot (QD) based photoluminescent devices are highly restricted by the application environment, especially the moisture and oxygen. However, current external encapsulation structures are not applicable to the devices with discrete QD distribution, especially for some rough profiles. To address this issue, an encapsulation method for discretely distributed quantum-dot arrays (DQDA) is proposed for liquid crystal display (LCD) backlight applications, in which the DQDA can be well fabricated by printing the QD slurry onto a light guiding substrate (LGS), and then covered with a thin UV glue layer and a barrier film. By specially optimizing the UV glue and barrier film, this ultra-thin encapsulation structure cannot only improve the surface defects of the QD morphology without affecting the original light path and the output optical performance, but also significantly suppress the fluorescence decay and isolate moisture and oxygen by almost 100 times compared with unencapsulated one. The water vapor transmission rate (WVTR) was measured to be 1.29 × 10-4 g/m2/day after fabricated the stacked encapsulation structure. After a long period of aging test, the encapsulated sample kept its luminance for 1000 hours. This method also has potential to widely used for discrete structures in other device applications due to its easy fabrication process, high reliability, and low manufacturing costs.
- 28 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 12 (2) , 1-10
Open AccessStacked Encapsulation Structure for Discretely Distributed Quantum Dot Array
The performances of quantum-dot (QD) based photoluminescent devices are highly restricted by the application environment, especially the moisture and oxygen. However, current external encapsulation structures are not applicable to the devices with discrete QD distribution, especially for some rough profiles. To address this issue, an encapsulation method for discretely distributed quantum-dot arrays (DQDA) is proposed for liquid crystal display (LCD) backlight applications, in which the DQDA can be well fabricated by printing the QD slurry onto a light guiding substrate (LGS), and then covered with a thin UV glue layer and a barrier film. By specially optimizing the UV glue and barrier film, this ultra-thin encapsulation structure cannot only improve the surface defects of the QD morphology without affecting the original light path and the output optical performance, but also significantly suppress the fluorescence decay and isolate moisture and oxygen by almost 100 times compared with unencapsulated one. The water vapor transmission rate (WVTR) was measured to be 1.29 × 10-4 g/m2/day after fabricated the stacked encapsulation structure. After a long period of aging test, the encapsulated sample kept its luminance for 1000 hours. This method also has potential to widely used for discrete structures in other device applications due to its easy fabrication process, high reliability, and low manufacturing costs.
- 14 November 2019
- Published by Optica Publishing Group in Optics Express
- Vol. 27 (24) , 34907-34920
Analytic design of light extraction array for light guide plate based on extended sources
Light extraction array, comprised of millions of discrete scattering dots randomly distributed on edge-lit light guide plates (LGPs), determines both the light efficiency and spatial uniformity of liquid crystal displays. However, it is hard to define by a specific mathematical expression. Here, we propose a novel analytic design for light extraction array based on geometrical optical principles. This design method consists of three successive procedures evolving from point- and line-source approximations to extended surface-source computation. Three procedures are demonstrated via both simulation and experiment, and the key factors influencing the performance of the light extraction array are also discussed. Our approach with high accuracy and reduced complexity will have broad prospect for illumination design.
- 14 November 2019
- Published by Optica Publishing Group in Optics Express
- Vol. 27 (24) , 34907-34920
Analytic design of light extraction array for light guide plate based on extended sources
Light extraction array, comprised of millions of discrete scattering dots randomly distributed on edge-lit light guide plates (LGPs), determines both the light efficiency and spatial uniformity of liquid crystal displays. However, it is hard to define by a specific mathematical expression. Here, we propose a novel analytic design for light extraction array based on geometrical optical principles. This design method consists of three successive procedures evolving from point- and line-source approximations to extended surface-source computation. Three procedures are demonstrated via both simulation and experiment, and the key factors influencing the performance of the light extraction array are also discussed. Our approach with high accuracy and reduced complexity will have broad prospect for illumination design.
- Open Access
- 31 January 2018
- Published by Optica Publishing Group in Optics Express
- Vol. 26 (3) , 3466-3482
Flexible/curved backlight module with quantum-dots microstructure array for liquid crystal displays
We present a backlight module (BLM) employing a photoluminescent quantum-dot microstructure array for flexible/curved liquid crystal displays (LCDs). Differently sized quantum-dot (QD) BLMs were prepared based on the theoretical spectral model and microstructure fabrication process. A 27-inch curved prototype showed a wide color gamut of 122.79% under the National Television Systems Committee standard while achieving high brightness of over 4000 cd/m2 and brightness/color uniformity of 85.21%/9.2 × 10−3. An LCD monitor prototype equipped with the proposed BLM was also assembled and tested, which showed higher visual performance when compared with a common commercial monitor. This method produces QD BLMs without the need of additional optical elements, and has good compatibility with traditional processes.
- 31 January 2018
- Published by Optica Publishing Group in Optics Express
- Vol. 26 (3) , 3466-3482
Open AccessFlexible/curved backlight module with quantum-dots microstructure array for liquid crystal displays
We present a backlight module (BLM) employing a photoluminescent quantum-dot microstructure array for flexible/curved liquid crystal displays (LCDs). Differently sized quantum-dot (QD) BLMs were prepared based on the theoretical spectral model and microstructure fabrication process. A 27-inch curved prototype showed a wide color gamut of 122.79% under the National Television Systems Committee standard while achieving high brightness of over 4000 cd/m2 and brightness/color uniformity of 85.21%/9.2 × 10−3. An LCD monitor prototype equipped with the proposed BLM was also assembled and tested, which showed higher visual performance when compared with a common commercial monitor. This method produces QD BLMs without the need of additional optical elements, and has good compatibility with traditional processes.