Peter Christiaan Meijers
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Peter Christiaan Meijers has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Apostolos Tsouvalas
Delft University of Technology
7 shared publications - Andrei V. Metrikine
Department of Engineering Structures, Delft University of Technology, Delft, The Netherlands
5 shared publications - Panagiota Atzampou
Delft University of Technology
4 shared publications A.V. Metrikine
3 shared publicationsAndrei V. Metrikine
2 shared publications- Athanasios Tsetas
Delft University of Technology
1 shared publication
Latest Publications
- Open Access
- 1 August 2026
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 31 (8)
Identification of strain-induced effective magnetisation in the presence of pile displacement
The demand for renewable energy has grown over the past decade and is projected to accelerate further. This rapid growth has led to an increase in offshore wind deployment and to the installation of increasingly large steel monopiles to account for fatigue damage during installation. Conventional contact-based sensors, such as strain gauges and accelerometers, are often not feasible offshore due to harsh installation conditions and the risk of sensor damage. To address this challenge, a novel non-contact sensor system has been developed that uses magnetomechanical effects to infer strain and an optical sensor to measure velocity. Recent full-scale hammer tests showed that this system can successfully capture strain and velocity during impact piling, allowing for comparison with the industry-standard Pile Driving Analyzer. However, accurate interpretation of magnetometer signals requires understanding the influence of various magnetic disturbances. This work investigates key interference sources arising during offshore pile driving, including the magnetic stray fields of adjacent ferromagnetic components, specifically the outer pile and the hammer-sleeve assembly, as well as the effects of the gradual rotation of the latter. Methods to separate strain-induced magnetization from these other magnetic contributions are explored to enhance signal fidelity. This is achieved through a combination of theoretical calculations and experimental measurements. By examining how these interferences influence strain measurements, this study enhances measurement reliability and advances non-contact monitoring technologies for offshore monopile installations.
- 1 August 2026
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 31 (8)
Open AccessIdentification of strain-induced effective magnetisation in the presence of pile displacement
The demand for renewable energy has grown over the past decade and is projected to accelerate further. This rapid growth has led to an increase in offshore wind deployment and to the installation of increasingly large steel monopiles to account for fatigue damage during installation. Conventional contact-based sensors, such as strain gauges and accelerometers, are often not feasible offshore due to harsh installation conditions and the risk of sensor damage. To address this challenge, a novel non-contact sensor system has been developed that uses magnetomechanical effects to infer strain and an optical sensor to measure velocity. Recent full-scale hammer tests showed that this system can successfully capture strain and velocity during impact piling, allowing for comparison with the industry-standard Pile Driving Analyzer. However, accurate interpretation of magnetometer signals requires understanding the influence of various magnetic disturbances. This work investigates key interference sources arising during offshore pile driving, including the magnetic stray fields of adjacent ferromagnetic components, specifically the outer pile and the hammer-sleeve assembly, as well as the effects of the gradual rotation of the latter. Methods to separate strain-induced magnetization from these other magnetic contributions are explored to enhance signal fidelity. This is achieved through a combination of theoretical calculations and experimental measurements. By examining how these interferences influence strain measurements, this study enhances measurement reliability and advances non-contact monitoring technologies for offshore monopile installations.
- Open Access
- 1 October 2025
- Published by IntechOpen
Motion Control of Suspended Loads via Magnetic Interaction
This chapter presents a coupled contactless control strategy designed to simultaneously manage the translational and torsional motions of a suspended load. The approach relies on magnetic dipole interactions between two pairs of magnets. Translational motion is controlled by modulating the polarity and strength of an external dipole, while torsional motion is regulated by adjusting the orientation of the external magnetic field of the corresponding controller dipole. The findings show that the system effectively dissipates motion caused by external disturbances and non-trivial initial conditions. Crucial control factors include the separation distance between the magnetic pairs and the capacity of the translational control to counterbalance the attractive forces induced by torsional torque. This magnetic control technique offers a strong basis for implementing non-contact position control of large payloads such as offshore wind turbine components.
- 1 October 2025
- Published by IntechOpen
Open AccessMotion Control of Suspended Loads via Magnetic Interaction
This chapter presents a coupled contactless control strategy designed to simultaneously manage the translational and torsional motions of a suspended load. The approach relies on magnetic dipole interactions between two pairs of magnets. Translational motion is controlled by modulating the polarity and strength of an external dipole, while torsional motion is regulated by adjusting the orientation of the external magnetic field of the corresponding controller dipole. The findings show that the system effectively dissipates motion caused by external disturbances and non-trivial initial conditions. Crucial control factors include the separation distance between the magnetic pairs and the capacity of the translational control to counterbalance the attractive forces induced by torsional torque. This magnetic control technique offers a strong basis for implementing non-contact position control of large payloads such as offshore wind turbine components.
- 1 October 2025
- Published by Springer Nature
- p. 145-153
Non-contact Energy Flux Measurement of Impact Pile Driving
- 1 October 2025
- Published by Springer Nature
- p. 145-153
Non-contact Energy Flux Measurement of Impact Pile Driving
- 1 October 2025
- Published by Springer Nature
- p. 37-45
Magnetic Control of Translational and Torsional Motions of Suspended Loads
- 1 October 2025
- Published by Springer Nature
- p. 37-45
Magnetic Control of Translational and Torsional Motions of Suspended Loads
- Open Access
- 2 December 2024
- Published by Elsevier in Ocean Engineering
- Vol. 316
Experimental investigation of frequency–amplitude decoupling in axial-torsional vibratory pile driving by means of laboratory-scale testing
- 2 December 2024
- Published by Elsevier in Ocean Engineering
- Vol. 316
Open AccessExperimental investigation of frequency–amplitude decoupling in axial-torsional vibratory pile driving by means of laboratory-scale testing
- Open Access
- 27 September 2024
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 113 (3) , 2001-2016
Non-contact electromagnetic control of torsional vibrations of a rigid cylinder
The successful deployment of offshore wind turbines hinges on the installation process, particularly the temporary suspension of the turbine components during assembly. External factors or imbalances in control forces can induce vibrations, emphasizing the need for precise control, especially in the torsional mode, to ensure the delicate alignment required for bolted connections. This paper introduces a contactless technique to control the torsional vibrations of a rigid cylinder using electromagnetic interaction between two magnets, incorporating magnetically-imposed damping and active control algorithms. The magnetically-imposed dissipation is achieved by introducing nonlinear damping into the system, i.e. by controlling the orientation of the field exerted by the electromagnetic actuator. Leveraging the nonlinear coupling of the interaction between the magnets and the modification of the stable equilibrium position, the results show a satisfactory active control performance (low residual error and swift response). The key parameters for control efficiency are identified as the separation distance between the magnets, the fluctuation step of the actuator’s magnetic field, and the magnetically-induced stiffness relative to the inherent stiffness of the system. Consequently, the proposed method lays a promising foundation for a non-contact control technique, particularly valuable in offshore wind turbine installations.
- 27 September 2024
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 113 (3) , 2001-2016
Open AccessNon-contact electromagnetic control of torsional vibrations of a rigid cylinder
The successful deployment of offshore wind turbines hinges on the installation process, particularly the temporary suspension of the turbine components during assembly. External factors or imbalances in control forces can induce vibrations, emphasizing the need for precise control, especially in the torsional mode, to ensure the delicate alignment required for bolted connections. This paper introduces a contactless technique to control the torsional vibrations of a rigid cylinder using electromagnetic interaction between two magnets, incorporating magnetically-imposed damping and active control algorithms. The magnetically-imposed dissipation is achieved by introducing nonlinear damping into the system, i.e. by controlling the orientation of the field exerted by the electromagnetic actuator. Leveraging the nonlinear coupling of the interaction between the magnets and the modification of the stable equilibrium position, the results show a satisfactory active control performance (low residual error and swift response). The key parameters for control efficiency are identified as the separation distance between the magnets, the fluctuation step of the actuator’s magnetic field, and the magnetically-induced stiffness relative to the inherent stiffness of the system. Consequently, the proposed method lays a promising foundation for a non-contact control technique, particularly valuable in offshore wind turbine installations.
- Open Access
- 24 July 2024
- Published by Elsevier in Ocean Engineering
- Vol. 310
Full-scale measurements and analysis of the floating installation of an offshore wind turbine tower
- 24 July 2024
- Published by Elsevier in Ocean Engineering
- Vol. 310
Open AccessFull-scale measurements and analysis of the floating installation of an offshore wind turbine tower
- 12 May 2024
- Published by Springer Nature
- p. 703-712
Experimental and Numerical Study of a Magnetic Pendulum
- 12 May 2024
- Published by Springer Nature
- p. 703-712
Experimental and Numerical Study of a Magnetic Pendulum
- Open Access
- 1 March 2022
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 217
Magnetic stray field measurements to identify and localise impact-induced plastic deformation in a steel structure
- 1 March 2022
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 217
Open AccessMagnetic stray field measurements to identify and localise impact-induced plastic deformation in a steel structure
- 1 November 2018
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 148, 1-8
A non-collocated method to quantify plastic deformation caused by impact pile driving
- 1 November 2018
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 148, 1-8
A non-collocated method to quantify plastic deformation caused by impact pile driving