Yoshiumi Kohno
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yoshiumi Kohno has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Yasumasa Tomita
Graduate School of Integrated Science and Technology, Shizuoka University , 3-5-1 Johoku, Chuo, Hamamatsu, Shizuoka 432-8561
15 shared publications - Masashi Shibata
School of Bioscience and Biotechnology, Tokyo University of Technology
7 shared publications - Keigo Tashiro
Graduate School of Integrated Science and Technology, Shizuoka University , 3-5-1 Johoku, Chuo, Hamamatsu, Shizuoka 432-8561
4 shared publications Masashi Shibata
4 shared publicationsShuhei Shimoda
Institute for Catalysis, Hokkaido University , Kita 21 Nishi 10 Kita, Sapporo, Hokkaido 001-0021
4 shared publicationsYasumasa Tomita
4 shared publications
Latest Publications
- 30 October 2026
- Published by Oxford University Press (OUP) in Chemistry Letters
- Vol. 55 (11)
Topological impact of polar-gradient field constructed with laponite and surfactant for CO2 capture by spiropyran molecule
Carbon dioxide (CO2) capture by the 1,3,3-trimethylindolinobenzopyrylospiran (TIBS) was enhanced by incorporating it into polar-gradient fields formed from laponite and hexadecyltrimethylammonium bromide (CTAB) surfactant. An increase in the CTAB concentration led sphere-to-fiber morphological transformation of the fields, stabilizing hydrophobic TIBS by suppressing isomerization to merocyanine forms. The TIBS in the fibrous fields enabled the capture of about 2 CO2 molecules per TIBS molecule. The topological engineering of the polar-gradient field is as an effective strategy for improving molecular CO2 capture by using organic dye molecules.
- 30 October 2026
- Published by Oxford University Press (OUP) in Chemistry Letters
- Vol. 55 (11)
Topological impact of polar-gradient field constructed with laponite and surfactant for CO2 capture by spiropyran molecule
Carbon dioxide (CO2) capture by the 1,3,3-trimethylindolinobenzopyrylospiran (TIBS) was enhanced by incorporating it into polar-gradient fields formed from laponite and hexadecyltrimethylammonium bromide (CTAB) surfactant. An increase in the CTAB concentration led sphere-to-fiber morphological transformation of the fields, stabilizing hydrophobic TIBS by suppressing isomerization to merocyanine forms. The TIBS in the fibrous fields enabled the capture of about 2 CO2 molecules per TIBS molecule. The topological engineering of the polar-gradient field is as an effective strategy for improving molecular CO2 capture by using organic dye molecules.
- 8 September 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (9)
Electroconductive Composite Cathode Material Composed of Lithium Fluoride and Lithium‐Doped Nickel Oxide with High Utilization for All‐Solid‐State Batteries
The improvement of capacity of cathodic active materials in all‐solid‐state lithium‐ion batteries (ASS‐LIBs) is a critical challenge for meeting future electronic power demands. In this study, a composite active material consisting of lithium fluoride (LiF) and nickel oxide (NiO) predoped with lithium ion (Li + ) at various doping levels ( Li( x )NiO ), denoted as LiF‐Li( x )NiO , was synthesized and applied to ASS‐LIBs. Notably, predoping of Li + into NiO enhanced the electronic conductivity throughout the cathode because of the appearance of energy levels at the bandgap region in an original NiO band structure, which improved the utilization efficiency of Li + in LiF‐Li( x )NiO . The maximum discharge capacity of 152 mAh g –1 was achieved when LiF‐Li( x )NiO predoped with 20 mol% Li + was employed. We demonstrate that the rational enhancement of electronic conductivity in active materials is a promising strategy for the development of better ASS‐LIBs.
- 8 September 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (9)
Electroconductive Composite Cathode Material Composed of Lithium Fluoride and Lithium‐Doped Nickel Oxide with High Utilization for All‐Solid‐State Batteries
The improvement of capacity of cathodic active materials in all‐solid‐state lithium‐ion batteries (ASS‐LIBs) is a critical challenge for meeting future electronic power demands. In this study, a composite active material consisting of lithium fluoride (LiF) and nickel oxide (NiO) predoped with lithium ion (Li + ) at various doping levels ( Li( x )NiO ), denoted as LiF‐Li( x )NiO , was synthesized and applied to ASS‐LIBs. Notably, predoping of Li + into NiO enhanced the electronic conductivity throughout the cathode because of the appearance of energy levels at the bandgap region in an original NiO band structure, which improved the utilization efficiency of Li + in LiF‐Li( x )NiO . The maximum discharge capacity of 152 mAh g –1 was achieved when LiF‐Li( x )NiO predoped with 20 mol% Li + was employed. We demonstrate that the rational enhancement of electronic conductivity in active materials is a promising strategy for the development of better ASS‐LIBs.
- 29 April 2026
- Published by Elsevier in Dyes and Pigments
- Vol. 252
Development of environmentally friendly blue colorant by intercalation of gardenia blue pigment into clay interlayers
- 29 April 2026
- Published by Elsevier in Dyes and Pigments
- Vol. 252
Development of environmentally friendly blue colorant by intercalation of gardenia blue pigment into clay interlayers
- Open Access
- 23 March 2026
- Published by Elsevier in Next Materials
- Vol. 11
Protonation-induced blue coloration and photostability of beta-carotene by adsorption on acidic silica materials
- 23 March 2026
- Published by Elsevier in Next Materials
- Vol. 11
Open AccessProtonation-induced blue coloration and photostability of beta-carotene by adsorption on acidic silica materials
- Open Access
- 5 March 2026
- Published by Elsevier in Next Materials
- Vol. 11
Stability enhancement and color retention of blue anthocyanin incorporated in the mesoporous silica
- 5 March 2026
- Published by Elsevier in Next Materials
- Vol. 11
Open AccessStability enhancement and color retention of blue anthocyanin incorporated in the mesoporous silica
- Open Access
Effects of Constituent Elements on the Electrochemical Characteristics of Composites of LiF and Several Spinel Oxides as Cathode Materials for Li-Ion Batteries
4LiF-MM’2O4 composites were synthesized via the mechanical milling of LiF and MM’2O4 (M = Mn, Mg, Zn; M’ = Mn Fe) for 72 h. In the obtained composites, the XRD peak broadened because of the milling, and the composites possessed a rock-salt-type structure. During charge–discharge measurements at 0.1 C, composites with spinel materials containing Mg showed particularly high discharge capacities; the discharge capacity of 4LiF-MMn2O4 and 4LiF-MFe2O4 was 310 mAh/g and 309 mAh/g, respectively. The discharge voltage was approximately 3.2 V for 4LiF-MgMn2O4 and approximately 2.8 V for 4LiF-MgFe2O4, and 4LiF-MgMn2O4 composites had the highest energy densities, exceeding 1000 Wh/kg. During cycle characteristic measurements with a cutoff voltage of 4.8 V and 4.4 V, the initial capacity retentions at the 100th cycle were 11% and 79%, respectively. The Coulombic efficiency was also better at a cutoff voltage of 4.4 V than that of 4.8 V, indicating that electrolyte decomposition has a significant influence on the cycle characteristics. Additionally, composites were synthesized via mechanical milling using various molar ratios of LiF and MgMn2O4. In xLiF-MgMn2O4 (x ≥ 3), the discharge potential was approximately 3.2 V, and the discharge capacity was higher than 250 mAh/g. The highest discharge capacity was observed for 4LiF-MgMn2O4 among xLiF-MgMn2O4 (x ≥ 3) composites.
Open AccessEffects of Constituent Elements on the Electrochemical Characteristics of Composites of LiF and Several Spinel Oxides as Cathode Materials for Li-Ion Batteries
4LiF-MM’2O4 composites were synthesized via the mechanical milling of LiF and MM’2O4 (M = Mn, Mg, Zn; M’ = Mn Fe) for 72 h. In the obtained composites, the XRD peak broadened because of the milling, and the composites possessed a rock-salt-type structure. During charge–discharge measurements at 0.1 C, composites with spinel materials containing Mg showed particularly high discharge capacities; the discharge capacity of 4LiF-MMn2O4 and 4LiF-MFe2O4 was 310 mAh/g and 309 mAh/g, respectively. The discharge voltage was approximately 3.2 V for 4LiF-MgMn2O4 and approximately 2.8 V for 4LiF-MgFe2O4, and 4LiF-MgMn2O4 composites had the highest energy densities, exceeding 1000 Wh/kg. During cycle characteristic measurements with a cutoff voltage of 4.8 V and 4.4 V, the initial capacity retentions at the 100th cycle were 11% and 79%, respectively. The Coulombic efficiency was also better at a cutoff voltage of 4.4 V than that of 4.8 V, indicating that electrolyte decomposition has a significant influence on the cycle characteristics. Additionally, composites were synthesized via mechanical milling using various molar ratios of LiF and MgMn2O4. In xLiF-MgMn2O4 (x ≥ 3), the discharge potential was approximately 3.2 V, and the discharge capacity was higher than 250 mAh/g. The highest discharge capacity was observed for 4LiF-MgMn2O4 among xLiF-MgMn2O4 (x ≥ 3) composites.
- Open Access
Effective Antioxidants for Stabilization of Chlorophyll Adsorbed on Silica Surface
This study investigates effective antioxidants to stabilize chlorophyll, a valuable and most abundant but unstable natural green pigment, adsorbed on a silica surface. Although fixing chlorophyll on silica offers some protection, significant photo-induced oxidative degradation still occurs. To enhance photostability, the prepared chlorophyll–silica composites were combined with various well-known antioxidants. The stability of these samples was evaluated by the deterioration ratio of the chlorophyll under visible light irradiation. The results showed that gallic acid provided the most significant stabilization effect. This was attributed to its moderate hydrophilicity, allowing it to be positioned near the chromophore part of the chlorophyll molecule adsorbed on the silica surface. Further tests with the derivatives of gallic acid revealed that smaller molecular size and less steric hindrance were also crucial for effectiveness as an antioxidative stabilizer. Pyrogallol and gallic acid, being the smallest molecules, performed best. It was concluded that the ability of an antioxidant to approach a chlorophyll molecule is essential for stabilization. This requires an appropriate balance of hydrophilicity and a small molecular size. Considering the nontoxicity together, gallic acid is recommended as a superior stabilizer for chlorophyll on silica surfaces.
Open AccessEffective Antioxidants for Stabilization of Chlorophyll Adsorbed on Silica Surface
This study investigates effective antioxidants to stabilize chlorophyll, a valuable and most abundant but unstable natural green pigment, adsorbed on a silica surface. Although fixing chlorophyll on silica offers some protection, significant photo-induced oxidative degradation still occurs. To enhance photostability, the prepared chlorophyll–silica composites were combined with various well-known antioxidants. The stability of these samples was evaluated by the deterioration ratio of the chlorophyll under visible light irradiation. The results showed that gallic acid provided the most significant stabilization effect. This was attributed to its moderate hydrophilicity, allowing it to be positioned near the chromophore part of the chlorophyll molecule adsorbed on the silica surface. Further tests with the derivatives of gallic acid revealed that smaller molecular size and less steric hindrance were also crucial for effectiveness as an antioxidative stabilizer. Pyrogallol and gallic acid, being the smallest molecules, performed best. It was concluded that the ability of an antioxidant to approach a chlorophyll molecule is essential for stabilization. This requires an appropriate balance of hydrophilicity and a small molecular size. Considering the nontoxicity together, gallic acid is recommended as a superior stabilizer for chlorophyll on silica surfaces.
- 15 October 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (40) , 21410-21413
Voltage-dependent ionic polarization in TlBr: alternate square-wave bias application for ionic polarization control
Scientific insights into the polarization of TlBr pellets under applied voltage were investigated to develop stable TlBr-based electronic devices.
- 15 October 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (40) , 21410-21413
Voltage-dependent ionic polarization in TlBr: alternate square-wave bias application for ionic polarization control
Scientific insights into the polarization of TlBr pellets under applied voltage were investigated to develop stable TlBr-based electronic devices.
- 5 August 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (64) , 11939-11942
Stepwise self-organization of hydrogen-bonded fibers in a minimalist glucose-pyrene system via CH–π-stabilized “iotamers”
A kinetically controlled self-organization system was realized using the synthetically simple molecule 4,6- O -pyrenylidene glucose (Py-Glc).
- 5 August 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (64) , 11939-11942
Stepwise self-organization of hydrogen-bonded fibers in a minimalist glucose-pyrene system via CH–π-stabilized “iotamers”
A kinetically controlled self-organization system was realized using the synthetically simple molecule 4,6- O -pyrenylidene glucose (Py-Glc).
- 20 September 2024
- Published by Japan Society of Colour Material in Journal of the Japan Society of Colour Material
- Vol. 97 (9) , 286-290
Stability Enhancement of Naturally Occurring Dye by Incorporation into Several Inorganic Host Materials
人体や環境への安全性に優れる天然色素は,安定性の不足から用途が限定される場面も多い。層状構造や細孔構造を持つ無機材料に天然色素を複合化し,さらに天然色素の性質に応じて種々の手段を講じることで,その安定性を向上させ長期間の色の保持を可能とする試みを紹介する。
- 20 September 2024
- Published by Japan Society of Colour Material in Journal of the Japan Society of Colour Material
- Vol. 97 (9) , 286-290
Stability Enhancement of Naturally Occurring Dye by Incorporation into Several Inorganic Host Materials
人体や環境への安全性に優れる天然色素は,安定性の不足から用途が限定される場面も多い。層状構造や細孔構造を持つ無機材料に天然色素を複合化し,さらに天然色素の性質に応じて種々の手段を講じることで,その安定性を向上させ長期間の色の保持を可能とする試みを紹介する。