Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mingchao Wang has a total of 129 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • The preparation and performance analysis of Cu2P2O7-modified phosphate adhesive for joining CfC to Invar alloy

    by Zhanming Hu, Jingjing Li, Fangyu Zhao, Yu Wang, Tao Xu, Haijun Zhang, Mingchao Wang, Wei Jing

  • Open Access

    Mechanism Analysis of Monnex Fire Extinguishing Performance and Particular Burning Fragmentation Phenomenon

    by Sai Yao, Zilong Liang, Zixuan Zhang, Suqin Chen, Lijing Wang, Mingchao Wang, Haijun Zhang

    Monnex has become the most efficient dry powder extinguishing agent due to its unique fire extinguishing mechanism—the “burning fragmentation” phenomenon. To study the fire extinguishing mechanism of Monnex in detail and elucidate the process of its “burning fragmentation” phenomenon, we have examined the microstructure changes and compositions of Monnex powder during its thermal decomposition process. The results indicate that Monnex undergoes complex iterative reactions and produces explosive intermediates (NH4NO3, KCN, and KN3) when entering the fire. Upon reaching the temperature of 240 °C, the explosive substance is completely pyrolyzed and undergoes a mini- burning fragmentation, resulting in the decomposition of Monnex powder into particles and the release of a large amount of inert gases and free radicals. This is the reason why Monnex has become an optimal dry powder. Toxic substances KCN and KOCN were found during the whole pyrolysis process, so personal protection should be paid attention to in practical applications. Our research not only improves the understanding of the Monnex fire extinguisher, but also provides important scientific evidence for the development of fire extinguishing technologies and environmentally friendly fire protection materials.

  • Synergistic joining technology and mechanism of glass brazing & adhesive bonding for extreme high-temperature environments

    by Zhanming Hu, Manshu Zhang, Xinru Peng, Xiaowen Jiang, Yu Wang, Jiancun Li, Wei Jing, Mingchao Wang


  • Open Access

    The preparation and performance analysis of Cu2P2O7-modified phosphate adhesive for joining CfC to Invar alloy

    by Zhanming Hu, Jingjing Li, Fangyu Zhao, Yu Wang, Tao Xu, Haijun Zhang, Mingchao Wang, Wei Jing

    To address the thermal expansion mismatch in C/C composite-Invar alloy joints, this study introduces the phase-transition NTE material Cu2P2O7 into an aluminum phosphate adhesive. By utilizing its pronounced negative expansion near the phase transition point, the overall CTE of the adhesive was precisely regulated. Experimental results show that at a Cu2P2O7 doping content of 50 wt%, the adhesive achieves the lowest CTE of 2.61×10-6 K-1, showing good match with the substrates, although the high filler content leads to some decrease in bonding performance. The optimal bonding performance was obtained with 20 wt% Cu2P2O7 (APSBC-2). After heat treatment at 600 °C, APSBC-2 exhibits a CTE of 3.96×10-6 K-1 while delivering the highest bonding strength among the six formulations (3.63 MPa). Under room-temperature curing, its bonding strength reaches a maximum of 11.47 MPa. Moreover, APSBC-2 demonstrates excellent thermal cycling durability, with strength attenuation rate of only 24.37% after 50 cycles between -20 °C and 100 °C. This work provides an effective strategy for developing advanced low-expansion adhesives.

  • Top Cited Papers
    Open Access

    Hierarchically structured aluminum borate whisker aerogel via sol–gel method and in-situ reaction

    by Xin Tao, Liangying Tang, Yuqi Zhao, Fangyu Zhao, Ziwei Xiang, Xinyue He, Mingchao Wang

    Ultra-light, thermally insulating, and temperature-resistant inorganic aerogels, including particulate and fibrous aerogels, serve as excellent thermal protection materials and hold significant applications in aerospace, energy, and environmental engineering. In this work, hierarchical aluminum borate whisker (ABOw) aerogels were prepared via a sol-gel process, followed by freeze-drying and high‑temperature in situ reaction, in which ABOw uniformly grow within the matrix, interspersed with either mullite fibers covered by ABOw or rod‑like ABOw assemblies. The size of ABOw within the matrix and the phase transformation temperature (Al4B2O9→Al18B4O33) decrease with increasing Al/B ratio. ABOw growth follows the V-S-L mechanism: in the matrix, whiskers nucleate uniformly around alumina particles and then grow; in contrast, whiskers on the fiber surface nucleate heterogeneously on preferentially oriented mullite grains, grow in clusters and gradually merge into a single whisker of increasing length. The density of ABOw aerogel ranges from 0.173-0.243 g/cm³, which decreases with increasing calcination temperature and decreasing Al/B ratio. The thermal conductivity lies between 0.0560-0.0873 W/(m·K) and increases with rising calcination temperature. The ABOw aerogels calcined at 1200oC have a compressive strength of 97.8-214.3 kPa, and the main failure modes are matrix fracture and interfacial cracking. The aerogel with an Al/B ratio of 2:1 exhibits a linear shrinkage of less than 5% without obvious welding phenomenon after high-temperature heat treatment(1400oC/20 h, 1500oC/2 h). This high-temperature resistant, lightweight, and thermally insulating ABOw aerogel is an excellent thermal protection material, and is also suitable for high-temperature filtration, adsorption, and catalysis.


  • Preparation and properties of polymethylsiloxane-modified polysilazane-based high-temperature-resistant adhesives for joining silicon nitride ceramics

    by Yajie Zhang, Yunjia Xue, Liangying Tang, Fan Zhang, Jingjing Li, Wenhao Hu, Kunying Ding, Bingfei Liu, Mingchao Wang

  • Open Access

    Preparation and performance investigation of modified silicate-based high-temperature resistant adhesives for quartz glass

    by Xinru Peng, Jingjing Li, Jiancun Li, Tingxuan Liu, Aoliang Liu, Xin Tao, Tao Xu, Mingchao Wang, Wei Jing


  • Open Access

    Study on Graphene-Reinforced Epoxy Solvent-Borne High-Temperature-Resistant Adhesives for Bonding C/C Composites Under Extreme Temperatures

    by Yue Wang, Yuqing Zhang, Zhanming Hu, Jingjing Li, Zhuo Gao, Mingchao Wang, Haijun Zhang

    Drawing inspiration from the bionic nacre structure, graphene was incorporated into the epoxy solvent-borne adhesive to construct a laminated architecture. At the same time, ferrocene was employed as a catalyst to induce the in situ growth of carbon nanotubes (CNTs) under high-temperature conditions. This modification endowed the epoxy solvent-borne adhesive with not only high strength in atmospheric environments but also the capability to retain considerable mechanical performance at elevated temperatures. Experimental results demonstrated that when the graphene content in the epoxy solution fell within the range of 3.2–4%, the bonding strength exceeded 3 MPa within the temperature range of 1000–1300 °C. In particular, the adhesive exhibited excellent thermal shock resistance, with no degradation in strength observed after 15 thermal shock cycles at 1300 °C. Such exceptional performance was attributed to the formation of interlaminar CNTs generated after high-temperature treatment. Scanning electron microscopy (SEM) observations clearly revealed the laminated graphene sheets and in situ grown CNTs, confirming the feasibility of the strategy to enhance bonding efficacy by mimicking the nacre structure. This approach represented an innovative breakthrough for further research on the application of the “brick-and-mortar” structure in the bonding layer and the in situ growth of CNTs among lamellar graphene, while also providing detailed supporting data.


  • Open Access

    Effect of Silica Sol on the Preparation and Oxidation Resistance of MoSi2@SiO2

    by Linlin Guo, Jinjun Zhang, Chengpeng Miao, Shuang Feng, Xiaozhen Fan, Haiyan Du, Jiachen Liu, Mingchao Wang

    The limited oxidation resistance of MoSi2 between 400 °C and 600 °C restricts its aerospace applications. This study develops a silica-sol derived core-shell MoSi2@SiO2 composite to enhance the low-temperature oxidation resistance of MoSi2. Acidic, neutral, and basic silica sols were systematically applied to coat MoSi2 powders through sol-adsorption encapsulation. Two pathways were used, one was ethanol-mediated dispersion, and the other was direct dispersion of MoSi2 particles in silica sol. Analysis demonstrated that ethanol-mediated dispersion significantly influenced the coating efficiency and oxidation resistance, exhibited significantly decreased coating weight gains (maximum 27%) and increased oxidation weight gains (10–20%) between 340 °C and 600 °C compared with direct dispersion of MoSi2 particles with silica sol, ascribe to the kinetic inhibition of hydroxyl group condensation and steric hindrance of MoSi2-silica sol interface interactions of ethanol. Systematic investigation of silica sol encapsulation of MoSi2 revealed critical correlations between colloid properties and oxidation resistance of MoSi2@SiO2. Basic silica sol coated MoSi2 (BS-MoSi2) exhibits the lowest coating efficiency (coating weight gain of 7.74 ± 0.06%) as well as lowest oxidation weight gain (18.45%) between 340 °C and 600 °C compared with those of acid and neutral silica sol coated MoSi2 (AS-MoSi2 and NS-MoSi2), arises from optimal gelation kinetics, enhanced surface coverage via reduced agglomeration, and suppressed premature nucleation through controlled charge interactions under alkaline conditions.