YZYanqing Zhang

Yanqing Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yanqing Zhang has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Improved Finite-Time Speed-Current Single-Loop Control of PMSM Considering the Limitations of High-Order State Observer

    by Yixuan Gao, Zhonggang Yin, Yanping Zhang, Yanqing Zhang, Hui Yang, Dongsheng Yuan

    High dynamic response is a key performance indicator of permanent magnet synchronous motor. In the classic dual-loop structure, the inner loop limits the response speed of the outer-loop. Therefore, an improved finite-time composite controller is proposed to be applied in the speed-current single-loop architecture to enhance the dynamic performance of the system target loop. This paper aims to enhance the performance of the outer loop, i.e., the target loop, directly in scenarios where precise control of the inner loop is not strictly necessary. First, after merging the speed and current loops, the order of the controlled objects increases. Compared with the low-order observer designed with the dual-loop structure, the estimated bandwidth of the high-order state observer decreases and the phase delay increases under the same design bandwidth. To this end, a finite-time state observer incorporating proportional differential terms is proposed to overcome the adverse effects of high-order systems. Second, in response to the problem of chattering near the convergence point caused by the inappropriate selection of exponential powers for finite-time functions, a speed-error and torque-current adaptive finite-time control strategy is proposed based on the characteristics of finite-time function and motor control requirements to effectively suppress chattering phenomena. Finally, the effectiveness and superiority of the proposed method are verified on the constructed experimental platform.

  • An Adaptive EKF-enhanced Hybrid Flux Observer for Position Sensorless SynRM Drives with Stator Resistance Adaptation

    by Fengtao Gao, Yanyong Yang, Yanping Zhang, Pinjia Zhang, Zhonggang Yin

    Position sensorless synchronous reluctance motor (SynRM) drives offer a reliable and cost-effective solution for electrified transportation systems. However, their position estimation accuracy degrades under uncertainty noise interference and stator resistance mismatch. In this paper, the SynRM position estimation method based on adaptive extended Kalman filtering-enhanced hybrid flux observer (AEKF-HFO) is proposed, which combines the wide speed range of HFO with the strong anti-interference ability of Kalman filtering. A flux prediction equation combining the current and voltage models is developed for designing an EKF-based flux observer, in which an online stator resistance adaptation scheme is integrated to enhance estimation consistency under the parameter variations. To alleviate the problem of position estimation accuracy decline caused by stator resistance estimation error at low speed, a structured Sage-Husa adaptation scheme is developed. The proposed method differentiates flux-and resistance-related components in the system noise covariance matrix and propagates the uncertainty of stator resistance into the flux subspace through sensitivity analysis. In addition, the stability of the proposed method is demonstrated in details. The experimental results show that the proposed method has superior position estimation accuracy and robustness under challenging conditions including noise interference, parameter mismatches, and inverter nonlinearities.

  • Sliding Mode Speed Control for Predictive Torque Control-Based Induction Machine Drives Based on Adaptive Variable Rate Reaching Law and Disturbance Extended Sliding Mode Observer

    by Yanqing Zhang, Zhonggang Yin, Yuehan Li, Danyang Jia

    For the predictive-torque-control (PTC) based induction-machine (IM) drives, to promote the speed tracking performance as well as the robustness against various unknown disturbances, such as friction, external load disturbance and parameter mismatch. A sliding-mode control with adaptive-variable-rate reaching law (SMC-AVRRL) and a disturbance-extended sliding-mode observer (DESMO) is proposed. First, the speed loop of PTC which utilizes the classical PI control is analyzed. It indicates that the control performance of the PI controller degrades apparently under sudden load disturbances and induction-machine parameters mismatch. Then the sliding-mode control with adaptive-variable-rate reaching law is proposed. Taking the typical reaching law, namely exponential reaching law (ERL), as a comparison object, the AVRRL method can reduce the chattering and convergence time simultaneously. The stability of the proposed SMC-AVRRL is analyzed by the Lyapunov stability theory. Moreover, to further enhance the anti-disturbance capacity, the proposed SMC-AVRRL is then combined with a disturbance-extended sliding-mode observer (DESMO), named the SMC-AVRRL + DESMO method. The experimental results show that the proposed SMC-AVRRL + DESMO method can not only achieve high speed tracking accuracy, but also achieves better robustness.


  • GRA-TOPSIS-Based Model Predictive Torque Control for Induction Motor Without Weighting Factors

    by Yanqing Zhang, Danyang Jia, Zhonggang Yin, Peien Luo

    Model predictive torque control (MPTC) has been recognized as a promising control strategy for induction motor (IM) drives. However, the weighting factor for adjusting the relative weights of torque and flux terms must be tuned correctly under different operating conditions. Up to now, the tuning process of weighting factor is still mainly based on engineering experience. In this article, a gray relational analysis-based technique for order preference by similarity to ideal solution (GRA-TOPSIS) is introduced as a solution for this issue, the proposed GRA-TOPSIS-MPTC eliminates the weighting factor tuning procedure and reduces the control complexity. As known, TOPSIS is one of the popular multicriteria decision-making methods used for the selection of optimal alternative from the various available alternatives. This article combines the gray relational analysis (GRA) and TOPSIS to further enhance the decision-making rationality. In the GRA-TOPSIS-MPTC system, the torque and flux control objectives are divided into two separate subcost function. Then, the torque and flux control errors are both standardized and evaluated based on the GRA-TOPSIS theory. The simulation and experimental results demonstrate that the proposed GRA-TOPSIS-MPTC, which has no weighting factor, achieves similar or even better control performance, and reduces the switching frequency than the conventional MPTC.


  • Adaptive Model-Free Deadbeat Predictive Current Control for Linear Permanent Magnet Synchronous Motor Based on Immune Algorithm

    by Yanqing Zhang, Hongtao Yuan, Zhonggang Yin, Cong Bai

    The model free deadbeat predictive current control (MFDPCC) for linear permanent magnet synchronous motor (LPMSM) drive system is emerging as a promising method due to its straightforward structure and strong parameter robustness. However, the conventional MFDPCC controller with the fixed gain leads to a contradiction between the dynamic and steady-state performance. To overcome this limitation, an adaptive MFDPCC based on immune algorithm is proposed in this article. First, the impact of the parameters mismatch on traditional DPCC is analyzed. Then, an ultralocal model, known as a typical branch of model free control, is developed to replace the conventional LPMSM model. For the ultralocal model with a typical fixed gain, the control performance is analyzed in detail, and it points out that there exits the contradiction between the dynamic and steady-state performance. Thus, to effectively balance the conflict, the immune algorithm is introduced to optimize the fixed parameter adaptively. Finally, the experimental test is carried out on a 0.9-kW LPMSM test bench, and the experimental results verify the effectiveness of the proposed method.


  • A Multiharmonics Suppression Backstepping Extended State Observer for the PMSM Electrolytic Capacitorless Drives Sensorless Control

    by Yuehan Li, Zhonggang Yin, Dongsheng Yuan, Yanqing Zhang, Yixuan Gao, Hui Yang

    The electrolytic capacitorless driver has a longer service life and higher reliability than traditional permanent magnet synchronous motor (PMSM) drivers. However, the ac component in the dc-link voltage will generate corresponding harmonics in the back electromotive force (BEMF), which will reduce the control accuracy of sensorless. The traditional extended state observer exhibits low-pass filtering characteristics, making it difficult to accurately estimate the BEMF that varies sinusoidally and effectively suppress the BEMF harmonics. Therefore, a multiharmonics suppression backstepping extended state observer (M-BESO) is proposed in this article. The BESO is designed in reverse according to the amplitude frequency characteristics of the bandpass filter, so that the center frequency changes with the motor frequency. Then, the complex coefficient module is introduced into the structure of BESO to eliminate the harmonics in the BEMF caused by the fluctuation component of the dc-link voltage. To mitigate the position estimation error when the motor speed changes rapidly, an improved phase locked loop based on third-order extended state observer is designed. Finally, the proposed method is verified on a self-built experimental platform based on the PMSM electrolytic capacitorless drives.


  • Ultralocal Model Based Model Predictive Torque Control of Induction Motor Drives With Model Free Speed Controller

    by Yanqing Zhang, Liang Shao, Zhonggang Yin, Cong Bai, Jing Liu

    To enhance the robustness of model predictive torque control (MPTC) drive systems, an ultralocal model (ULM) based model predictive torque control with model free control (ULM-MPTC-MFC) is proposed in this article. First, a typical MPTC is established based on the conventional induction motor (IM) model, which is sensitive to the motor parameters variation. It is known that the performance will degrade substantially once the parameters mismatch occur. To address this issue, an ULM is constructed, in which the ULM is utilized to not only predict stator current, but also predict stator flux. During the prediction process, the parameters mismatch can be eliminated accordingly since the input and output of the system are the only two items used in ULM. Moreover, to further improve the robustness of the system, the model free control (MFC) is introduced to replace the conventional PI control in the speed loop. By considering the MFC theory, an independent ULM sliding mode controller is established. The Lyapunov stability theory is used to prove the stability of the proposed method. Compared with the conventional MPTC, experimental results show that the proposed ULM-MPTC-MFC has the better robustness against motor parameters variation and step load change.


  • Overvoltage Suppression Strategy for Electrolytic Capacitorless Drives Using Sliding Mode Controller Based on Improved Variable Rate Reaching Law

    by Yuehan Li, Zhonggang Yin, Yanqing Zhang, Dongsheng Yuan, Yixuan Gao, Jing Liu

    The advantage of a permanent magnet synchronous motor (PMSM) electrolytic capacitorless drives lies in its small volume and long service life, as its dc-link uses small capacitance film capacitors. However, during the regenerative braking process of the motor, small capacitance film capacitors are prone to cause overvoltage in the dc-link. The PI regulators are widely used in traditional overvoltage controllers. However, the PI regulator depends on the system model. As the deceleration amplitude and deceleration rate of the motor increase, the voltage control loop gradually becomes unstable, which may lead to the failure of overvoltage suppression. For the purpose of improving the response speed and stability of the voltage control circuit, a sliding mode voltage controller (SMVC) utilizing an improved variable rate convergence law (IVRRL) is proposed in this article. Firstly, the mathematical model is established for the q-axis current and dc-link voltage. Then, SMVC is designed using exponential reaching law (ERL). To reduce the conflict between convergence speed and chattering suppression, a SMVC based on IVRRL is proposed. The convergence and stability of IVRRL have been proven. Finally, the proposed SMVC is validated on the experimental device of a PMSM electrolytic capacitorless drives.


  • A Novel Reinforcement Learning via Dual-Engine Quick Method for Motor Bearings Unknown Faults

    by Peien Luo, Zhonggang Yin, Yanqing Zhang, Cong Bai, Pinjia Zhang, Jing Liu

    As one of the most core and vulnerable components of electric vehicles (EVs), the failure of bearings has become a key issue limiting the safety of vehicle systems. Quick diagnosis of faults can ensure the continuous and stable operation of EVs. However, the complexity of the driving environment and the dynamic nature of EVs lead to unknown bearing failures. This seriously affects the performance of the vehicle system and personal safety. In response to the above issues, a dual-engine quick diagnosis method for unknown faults in motor bearings via the chord transform rotary evaporation is proposed. First, the rotary evaporation strategy is proposed. This method meets the requirements of reinforcement learning on the amount of unlabeled sample data and effectively solves the problem of confusing old and new samples in the learning process. Second, an adaptive chord transform feature affine-invariant strategy is proposed. This method better accepts the constraints between evaporation loss and bearing state category loss and effectively solves the data computation problem. Finally, a comparison is made with existing advanced methods in a multioperating condition open dataset and an experimental platform for bearing faults. The experimental results validated the advantages of the dual-engine model in diagnosing unknown faults of motor bearings.


  • Increasing Interpretability and Feasibility of Data Driven-Based Unknown Fault Diagnosis in Permanent Magnet Synchronous Motors

    by Peien Luo, Zhonggang Yin, Yanqing Zhang, Cong Bai, Pinjia Zhang, Jing Liu

    Data-driven methods often rely on historical data to establish diagnostic models, and model performance depends on the quantity and quality of data. However, historical data is difficult to access and of low quality in practical engineering applications. To solve the above problems, a device modelingbased method for unknown fault interpretability and feasibility enhancement of permanent magnet synchronous motors (PMSM) is proposed. First, a nonlinear fault contact force model coupled with time-varying contact deformation and time-varying stiffness is constructed. The variation rule of fault vibration response characteristics under different fault sizes is obtained. The method satisfies the requirement of reinforcement learning (RL) on the amount of data and improves the diagnosis accuracy under incomplete data. Second, a rotary evaporation strategy is proposed to eliminate the impact of knowledge memory and accurate modeling on diagnostic efficiency. The method better accepts the constraints between evaporation loss and bearing state category loss and improves the real-time performance of fault diagnosis. Finally, its performance is compared with existing advanced methods on a self-built experimental platform that includes multiple working conditions. The experimental results demonstrate the advantages of the method in terms of motor diagnostic performance and interpretability