Ashish Gupta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Ashish Gupta has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Raghvenda Kumar Singh
Department of Electronics and Communication Engineering, Jaypee Institute of Information Technology, Noida, Uttar Pradesh, India
14 shared publications - Bhagirath Sahu
Department of Electronics and Communication Engineering, Jaypee Institute of Information Technology, Noida, India
3 shared publications Raghvenda Kumar Singh
Department of Electronics and Communication Engineering Jaypee Institute of Information Technology Noida Uttar Pradesh 201304 India
3 shared publications- Abdhesh Kumar Singh
Delhi Technical Campus
2 shared publications Akash Yadav
Jaypee University of Information Technology
2 shared publicationsNishchay Gupta
Jaypee Institute of Information Technology
2 shared publications
Latest Publications
- 12 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. PP (00933813) , 1-10
A Highly Sensitive Dual-Band Metamaterial Sensor for Liquid Adulteration and Biomedical Detection
This work presents a novel dual-band terahertz metasurface sensor exhibiting notable performance in refractive index (RI) sensing. The designed structure integrates multiple resonator topologies on a polyimide substrate to achieve dual-band absorption operations with a high $Q$ -factor—an essential attribute in sensitive applications. The proposed metasensor is tested for RI sensing in the range of 1–2 with a high resolution of 0.05 and found to be demonstrating strong potential in various sensing domains, including adulteration detection in edible oils and fuels, as well as biomedical sensing such as bacterial and amino acid identification. Numerical results demonstrate that it provides the maximum sensitivities of 150, 155, 152, and 152 GHz/RIU (RI unit) and a figure of merit (FoM) of 6.531, 7.026, 6.597, and 6.596 RIU−1 for the detection of edible oils, fuels, bacteria, and amino acids, respectively. The dual-band nature of the proposed unit cell enhances its versatility, allowing operation in either frequency band, which provides a high degree of freedom as per the requirements. Moreover, it offers highly linear sensitive behavior across different sample thicknesses in the RI range of 1–2, exploiting linear regression analyses. Insensitivity of absorption performance with respect to variations in the polarization and incidence angles augments this sensor’s case for employment in the above applications. Key sensing parameters have been numerically calculated and demonstrate promising results when compared with existing state-of-the-art designs. The fabrication process and implementation setup are discussed to validate the sensor’s real-world applicability. Overall, the suggested metasensor shows promise for applications in advanced liquid adulteration analysis and biomedical sensing.
- 12 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. PP (00933813) , 1-10
A Highly Sensitive Dual-Band Metamaterial Sensor for Liquid Adulteration and Biomedical Detection
This work presents a novel dual-band terahertz metasurface sensor exhibiting notable performance in refractive index (RI) sensing. The designed structure integrates multiple resonator topologies on a polyimide substrate to achieve dual-band absorption operations with a high $Q$ -factor—an essential attribute in sensitive applications. The proposed metasensor is tested for RI sensing in the range of 1–2 with a high resolution of 0.05 and found to be demonstrating strong potential in various sensing domains, including adulteration detection in edible oils and fuels, as well as biomedical sensing such as bacterial and amino acid identification. Numerical results demonstrate that it provides the maximum sensitivities of 150, 155, 152, and 152 GHz/RIU (RI unit) and a figure of merit (FoM) of 6.531, 7.026, 6.597, and 6.596 RIU−1 for the detection of edible oils, fuels, bacteria, and amino acids, respectively. The dual-band nature of the proposed unit cell enhances its versatility, allowing operation in either frequency band, which provides a high degree of freedom as per the requirements. Moreover, it offers highly linear sensitive behavior across different sample thicknesses in the RI range of 1–2, exploiting linear regression analyses. Insensitivity of absorption performance with respect to variations in the polarization and incidence angles augments this sensor’s case for employment in the above applications. Key sensing parameters have been numerically calculated and demonstrate promising results when compared with existing state-of-the-art designs. The fabrication process and implementation setup are discussed to validate the sensor’s real-world applicability. Overall, the suggested metasensor shows promise for applications in advanced liquid adulteration analysis and biomedical sensing.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 27 (1) , 99-100
Inauguration of IEEE MTT-S Student Branch Chapter at Jaypee Institute of Information Technology, Noida, India [MGA News]
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 27 (1) , 99-100
Inauguration of IEEE MTT-S Student Branch Chapter at Jaypee Institute of Information Technology, Noida, India [MGA News]
- 3 December 2025
- Published by Springer Nature
- p. 1-46
CPW-Fed Metamaterial Antennas for Gain Enhancement Employing Closed-Ring Resonating Structures for Small-Space Applications
- 3 December 2025
- Published by Springer Nature
- p. 1-46
CPW-Fed Metamaterial Antennas for Gain Enhancement Employing Closed-Ring Resonating Structures for Small-Space Applications
- 30 November 2025
- Published by Springer Nature
- p. 1-33
Compact Dual-Band Metamaterial-Inspired Antenna for Satellite Applications
- 30 November 2025
- Published by Springer Nature
- p. 1-33
Compact Dual-Band Metamaterial-Inspired Antenna for Satellite Applications
- 22 August 2025
- Published by American Geophysical Union (AGU) in Radio Science
- Vol. 60 (8)
A Broadband Metasurface Based Reflective Type Polarizer for Cross Polarization and Linear‐to‐Circular Polarization Conversion With Minimal Null Operation Zone
Herein, we put forward an ultra‐thin and highly efficient multifunctional wideband reflective polarization converter metasurface for the manipulation of polarization state of the electromagnetic wave. Strong anisotropic characteristics have been achieved by employing a diagonally kept double‐sided modified arrow on single layer FR4 substrate backed with copper. Numerical studies show that on one hand, the realized metasurface is capable to convert a linearly polarized (LP) wave ( y / x ) into its orthogonal counterpart ( x / y ) over 6.35–9.00 GHz and 15.47–16.03 GHz exceeding 90% polarization conversion ratio. On the other hand, it efficiently transforms the LP wave into reflected circularly polarized (CP) wave over 5.32–6.15 GHz, 9.50–15.22 GHz, and 16.24–17.45 GHz with an axial ratio lower than 3 dB. It is investigated that the type of circular polarization is right‐handed over first two above bands while showing left‐handed in the last band. Due to the minimum level of tolerance in reflection phases (<22°) with respect to the acceptable limits, the proposed unit‐cell exhibits exceptional CP and cross polarization characteristics in the given bands. An array of 33 × 33 unit‐cells is created as a prototype and tested experimentally to confirm the suggested structure.
- 22 August 2025
- Published by American Geophysical Union (AGU) in Radio Science
- Vol. 60 (8)
A Broadband Metasurface Based Reflective Type Polarizer for Cross Polarization and Linear‐to‐Circular Polarization Conversion With Minimal Null Operation Zone
Herein, we put forward an ultra‐thin and highly efficient multifunctional wideband reflective polarization converter metasurface for the manipulation of polarization state of the electromagnetic wave. Strong anisotropic characteristics have been achieved by employing a diagonally kept double‐sided modified arrow on single layer FR4 substrate backed with copper. Numerical studies show that on one hand, the realized metasurface is capable to convert a linearly polarized (LP) wave ( y / x ) into its orthogonal counterpart ( x / y ) over 6.35–9.00 GHz and 15.47–16.03 GHz exceeding 90% polarization conversion ratio. On the other hand, it efficiently transforms the LP wave into reflected circularly polarized (CP) wave over 5.32–6.15 GHz, 9.50–15.22 GHz, and 16.24–17.45 GHz with an axial ratio lower than 3 dB. It is investigated that the type of circular polarization is right‐handed over first two above bands while showing left‐handed in the last band. Due to the minimum level of tolerance in reflection phases (<22°) with respect to the acceptable limits, the proposed unit‐cell exhibits exceptional CP and cross polarization characteristics in the given bands. An array of 33 × 33 unit‐cells is created as a prototype and tested experimentally to confirm the suggested structure.
- 16 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 32 (6) , 3698-3706
Mutual Coupling Reduction of Al 2 O 3 Ceramic MIMO Dielectric Antenna Integrated Metasurface-Based Polarization Converters
In this paper a compact two port MIMO dielectric antenna integrated with metasurface based polarization converters for extreme reduction in mutual coupling has been engineered and developed. A complementary circular dumbbell-shaped polarization converter (PC) demonstrates cross-polarization conversion with over 90% efficiency across 11.25–14.73 GHz. Its mirror arrangement yields a 180° reflection phase, suggesting potential for mutual coupling reduction in MIMO antennas. Cylindrical-shaped Al2O3 ceramic dielectric resonator (DR) has been utilized to formulate dielectric MIMO antennas (DRMA) and to work in the common wide frequency range 9.08 -13.35 GHz with respect to above polarization converter. Finally, PC is integrated over MIMO antennas to enhance the isolation between two antenna elements. Simulation results show that proposed MIMO antenna with the employment of metasurface based PC is capable to work over 9.04-13.28 GHz with reduced level of isolation. The physical size of the proposed dielectric MIMO antenna with polarization converter (DRMAPC) is 59 × 35 × 5.1 mm3. In order to create a compact MIMO antenna system, the suggested technique helps to eliminate the mutual coupling between antenna elements and permits the antenna designer to place the elements closely to one another.
- 16 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 32 (6) , 3698-3706
Mutual Coupling Reduction of Al 2 O 3 Ceramic MIMO Dielectric Antenna Integrated Metasurface-Based Polarization Converters
In this paper a compact two port MIMO dielectric antenna integrated with metasurface based polarization converters for extreme reduction in mutual coupling has been engineered and developed. A complementary circular dumbbell-shaped polarization converter (PC) demonstrates cross-polarization conversion with over 90% efficiency across 11.25–14.73 GHz. Its mirror arrangement yields a 180° reflection phase, suggesting potential for mutual coupling reduction in MIMO antennas. Cylindrical-shaped Al2O3 ceramic dielectric resonator (DR) has been utilized to formulate dielectric MIMO antennas (DRMA) and to work in the common wide frequency range 9.08 -13.35 GHz with respect to above polarization converter. Finally, PC is integrated over MIMO antennas to enhance the isolation between two antenna elements. Simulation results show that proposed MIMO antenna with the employment of metasurface based PC is capable to work over 9.04-13.28 GHz with reduced level of isolation. The physical size of the proposed dielectric MIMO antenna with polarization converter (DRMAPC) is 59 × 35 × 5.1 mm3. In order to create a compact MIMO antenna system, the suggested technique helps to eliminate the mutual coupling between antenna elements and permits the antenna designer to place the elements closely to one another.
- Open Access
- 16 October 2024
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 16 (9) , 1552-1560
A modified dumbbell-shaped highly efficient broadband multifunctional polarizer for X and Ku band applications
A novel metasurface offering polarization conversion characteristic in five bands is studied and developed in this paper. To provide the anisotropic feature to the structure, a diagonally placed tapered rod is combined with two semicircular stubs. Due to the controlling ability to convert horizontal to vertical polarization and vice versa, and linear to circular polarization (CP), it serves as a multifunctional polarization converter. Simulation results suggest that the proposed polarizer functions as cross polarizer over 4.74−5.12 and 9.12−13.48 GHz. Additionally, it exhibits a distinct type of rotational sense across 4.24−4.68, 5.24−8.64, and 13.72–15.14 GHz in its linear to CP conversion behavior. The axial ratio of the polarizer is well below 3 dB throughout overall CP bands due to the minimum tolerance level in reflection phases with respect to acceptable limits. Moreover, it is noticed that the sense of CP is left-handed in the first band while right-handed in the remaining two bands. Thus, the suggested polarizer has potential to be integrated with antennas for satellite, defense, industry applications for getting the desired type of polarization in the distinguished bands.
- 16 October 2024
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 16 (9) , 1552-1560
Open AccessA modified dumbbell-shaped highly efficient broadband multifunctional polarizer for X and Ku band applications
A novel metasurface offering polarization conversion characteristic in five bands is studied and developed in this paper. To provide the anisotropic feature to the structure, a diagonally placed tapered rod is combined with two semicircular stubs. Due to the controlling ability to convert horizontal to vertical polarization and vice versa, and linear to circular polarization (CP), it serves as a multifunctional polarization converter. Simulation results suggest that the proposed polarizer functions as cross polarizer over 4.74−5.12 and 9.12−13.48 GHz. Additionally, it exhibits a distinct type of rotational sense across 4.24−4.68, 5.24−8.64, and 13.72–15.14 GHz in its linear to CP conversion behavior. The axial ratio of the polarizer is well below 3 dB throughout overall CP bands due to the minimum tolerance level in reflection phases with respect to acceptable limits. Moreover, it is noticed that the sense of CP is left-handed in the first band while right-handed in the remaining two bands. Thus, the suggested polarizer has potential to be integrated with antennas for satellite, defense, industry applications for getting the desired type of polarization in the distinguished bands.
- 11 July 2024
- Published by Taylor & Francis in IETE Journal of Research
- Vol. 70 (11) , 8097-8109
A Compact Modified Elliptical-Shaped Ultra-wideband Filtering Antenna with Improved Band-Edge Selectivity
- 11 July 2024
- Published by Taylor & Francis in IETE Journal of Research
- Vol. 70 (11) , 8097-8109
A Compact Modified Elliptical-Shaped Ultra-wideband Filtering Antenna with Improved Band-Edge Selectivity
- Open Access
- 1 January 2024
- Published by Wiley in International Journal of Antennas and Propagation
- Vol. 2024 (1)
A Miniaturized High‐Gain Circular Coaxial‐Fed Radiator Filtering Antenna with Configurable Radiation Nulls for Modern 5G Applications
In this paper, a low‐profile, high‐gain filtering antenna is proposed and developed for n‐77 (3300–4200 MHz) and n‐78 band (3300−3800 MHz) applications. The suggested filtering antenna is derived from a circular patch antenna. To efficiently reduce the harmonics, in the lower and upper stopbands, a pair of sectoral arcs and rectangular slots is etched out from the driven circular patch. Furthermore, the resultant structure is surrounded by a ring split at three different locations. Simulation studies reveal that this ring with three sectors is coupled with a driven patch and is highly responsible for extending the impedance bandwidth in the passband. This coupling also contributes to an extranull in the upper stopband region. In order to validate the simulated results, a prototype is fabricated, tested, and found that the measured results are consistent with the simulated one. The suggested filtering antenna, with a low profile of 0.0194λ0, demonstrates a wide fractional bandwidth of 10.2% ranging from 3.52 to 3.90 GHz, centred at 3.7 GHz. The maximum peak gain of 7.68 dB is achieved within the passband. Three configurable radiation nulls, first at 3.36 GHz, near the lower band edge; second at 4.04 GHz; and third at 4.24 GHz, near the upper band‐edge frequencies, are generated to achieve fine out‐of‐band suppression levels.
- 1 January 2024
- Published by Wiley in International Journal of Antennas and Propagation
- Vol. 2024 (1)
Open AccessA Miniaturized High‐Gain Circular Coaxial‐Fed Radiator Filtering Antenna with Configurable Radiation Nulls for Modern 5G Applications
In this paper, a low‐profile, high‐gain filtering antenna is proposed and developed for n‐77 (3300–4200 MHz) and n‐78 band (3300−3800 MHz) applications. The suggested filtering antenna is derived from a circular patch antenna. To efficiently reduce the harmonics, in the lower and upper stopbands, a pair of sectoral arcs and rectangular slots is etched out from the driven circular patch. Furthermore, the resultant structure is surrounded by a ring split at three different locations. Simulation studies reveal that this ring with three sectors is coupled with a driven patch and is highly responsible for extending the impedance bandwidth in the passband. This coupling also contributes to an extranull in the upper stopband region. In order to validate the simulated results, a prototype is fabricated, tested, and found that the measured results are consistent with the simulated one. The suggested filtering antenna, with a low profile of 0.0194λ0, demonstrates a wide fractional bandwidth of 10.2% ranging from 3.52 to 3.90 GHz, centred at 3.7 GHz. The maximum peak gain of 7.68 dB is achieved within the passband. Three configurable radiation nulls, first at 3.36 GHz, near the lower band edge; second at 4.04 GHz; and third at 4.24 GHz, near the upper band‐edge frequencies, are generated to achieve fine out‐of‐band suppression levels.
- Open Access
- 5 September 2023
- Published by Hindawi Limited in International Journal of Antennas and Propagation
- Vol. 2023, 1-12
An Ultrathin Polarization Free Asterick-Shaped Metamaterial Absorber with Quad-Band Characteristics
In this paper, a quad-band absorber is proposed and developed, which is exhibiting ultrathin and polarization insensitive behaviour. It has been designed to be operated in S, C, and Ku bands with absorptions peaks at more than 95. The proposed absorber is implemented on a FR4 glass epoxy laminate with an equivalent electrical thickness of 0.0108 λ0, where λ0 is the wavelength corresponding to the lowest frequency of operation. This confirms the ultrathin nature of the structure. The absorption performance of the proposed structure has been characterized under normal and oblique incidences followed by their experimental verification. Presented results demonstrate highly polarization-independent behavior of the proposed absorber due to its symmetric geometry. Also, the electromagnetic field distributions have been studied to acquire better insight of the absorption mechanism corresponding to distinct elements present in the structure. It is characterized in terms of its behavior as metamaterial, which ensures the miniaturization. The proposed absorber is suitable to be used in applications like radar cross section reduction, stealth technology, radio frequency identification, and electromagnetic compatibility.
- 5 September 2023
- Published by Hindawi Limited in International Journal of Antennas and Propagation
- Vol. 2023, 1-12
Open AccessAn Ultrathin Polarization Free Asterick-Shaped Metamaterial Absorber with Quad-Band Characteristics
In this paper, a quad-band absorber is proposed and developed, which is exhibiting ultrathin and polarization insensitive behaviour. It has been designed to be operated in S, C, and Ku bands with absorptions peaks at more than 95. The proposed absorber is implemented on a FR4 glass epoxy laminate with an equivalent electrical thickness of 0.0108 λ0, where λ0 is the wavelength corresponding to the lowest frequency of operation. This confirms the ultrathin nature of the structure. The absorption performance of the proposed structure has been characterized under normal and oblique incidences followed by their experimental verification. Presented results demonstrate highly polarization-independent behavior of the proposed absorber due to its symmetric geometry. Also, the electromagnetic field distributions have been studied to acquire better insight of the absorption mechanism corresponding to distinct elements present in the structure. It is characterized in terms of its behavior as metamaterial, which ensures the miniaturization. The proposed absorber is suitable to be used in applications like radar cross section reduction, stealth technology, radio frequency identification, and electromagnetic compatibility.