Can Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Can Jiang has a total of 71 co-authors. Here are the top co-authors by number of shared publications:
Xiaoyun Bi
10 shared publicationsZuhao Wang
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials School of Materials Science and Engineering Wuhan Institute of Technology Wuhan China
9 shared publicationsHonghan Sun
Wuhan Institute of Technology
6 shared publications- Yunfei Zhang
Wuhan Institute of Technology
6 shared publications Zhaoyan Huang
5 shared publications- Fei-Peng Du
Wuhan Institute of Technology
4 shared publications
Latest Publications
- 25 August 2026
- Published by American Chemical Society (ACS) in Journal of Chemical Education
- Vol. 103 (9) , 5085-5094
From Biobased Materials to Flexible Functional Devices: An Interdisciplinary Innovative Experiment Design for Materials Science and Engineering Students
To bridge the gap between materials synthesis and intelligent systems engineering, this article presents an interdisciplinary innovative experiment based on fully biobased flexible functional devices for undergraduate materials science and engineering students. Students prepare a flexible substrate through latex compounding and acid coprecipitation, using interfacial hydrogen bonding between plant-derived lignin and natural rubber latex to suppress lignin self-aggregation. Direct laser writing is then introduced, in which the photothermal effect of a CO2 laser beam converts the insulating lignin in situ into conductive, porous laser-induced graphene (LIG). On this platform, students construct and evaluate five types of functional devices: resistive strain and pressure sensors evaluated using a universal testing machine and digital multimeters; a serpentine temperature sensor that exploits polymer thermal expansion; a capacitive humidity sensor based on a graphene oxide/NaOH dielectric film, characterized across saturated salt solutions using an LCR meter; and an electrothermal Joule heating actuator evaluated using a DC power supply and an infrared thermal camera. Finally, students collect real-time resistance signals from their self-fabricated knee-joint strain sensors and use a deep-learning model for human motion recognition with over 97% accuracy. Implemented across two consecutive semesters with 58 students, this experiment helps students develop a systematic “Materials–Devices–Data–Applications” engineering perspective in green electronics.
- 25 August 2026
- Published by American Chemical Society (ACS) in Journal of Chemical Education
- Vol. 103 (9) , 5085-5094
From Biobased Materials to Flexible Functional Devices: An Interdisciplinary Innovative Experiment Design for Materials Science and Engineering Students
To bridge the gap between materials synthesis and intelligent systems engineering, this article presents an interdisciplinary innovative experiment based on fully biobased flexible functional devices for undergraduate materials science and engineering students. Students prepare a flexible substrate through latex compounding and acid coprecipitation, using interfacial hydrogen bonding between plant-derived lignin and natural rubber latex to suppress lignin self-aggregation. Direct laser writing is then introduced, in which the photothermal effect of a CO2 laser beam converts the insulating lignin in situ into conductive, porous laser-induced graphene (LIG). On this platform, students construct and evaluate five types of functional devices: resistive strain and pressure sensors evaluated using a universal testing machine and digital multimeters; a serpentine temperature sensor that exploits polymer thermal expansion; a capacitive humidity sensor based on a graphene oxide/NaOH dielectric film, characterized across saturated salt solutions using an LCR meter; and an electrothermal Joule heating actuator evaluated using a DC power supply and an infrared thermal camera. Finally, students collect real-time resistance signals from their self-fabricated knee-joint strain sensors and use a deep-learning model for human motion recognition with over 97% accuracy. Implemented across two consecutive semesters with 58 students, this experiment helps students develop a systematic “Materials–Devices–Data–Applications” engineering perspective in green electronics.
- 25 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (9) , 4267-4276
Stretchable and Wide-Temperature Rubber-Based Zinc-Ion Batteries Enabled by Lignin-Derived Laser-Induced Graphene
- 25 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (9) , 4267-4276
Stretchable and Wide-Temperature Rubber-Based Zinc-Ion Batteries Enabled by Lignin-Derived Laser-Induced Graphene
- 2 March 2026
- Published by Wiley in Electroanalysis
- Vol. 38 (3) , e70122
In Situ Growth of Prussian Blue Analog on Laser‐Induced Lignin‐Derived Porous Graphene Flexible Platform for Amino Acid Detection in Human Sweat
Prussian blue (PB) and its analogs (PBA) are widely used for modifying flexible electrochemical sensors due to their excellent electrocatalytic activity and low cost. However, traditional electrodeposition methods often result in uneven films with poor crystallinity and weak adhesion, compromising sensor stability and reproducibility. Herein, we propose a lignosulfonate (LS)‐assisted solution‐phase in situ growth strategy to achieve uniform nucleation and high‐loading growth of PBA nanocrystals on laser‐induced graphene (LIG) under mild conditions (45°C, atmospheric pressure). Leveraging the three‐dimensional porous structure and high surface area of LIG, combined with the dispersion and regulatory functions of LS, PBA crystals grow directly on the graphene framework, forming a tightly bound, highly crystalline active interface. Compared to electrodeposited PB, this approach enhances interfacial adhesion, prevents delamination, and simplifies the fabrication process, making it suitable for scalable, low‐cost flexible devices. Integrated with molecular imprinting technology (MIP), the resulting RE‐PBA@LIG@MIP electrode exhibits a peak current density of −5.29 mA cm −2 (12% higher than PB) and retains 88.48% activity after 2000 cycles. The sensor achieves a detection limit of 0.28 μM for leucine, with excellent selectivity against histidine, isoleucine, lysine, and uric acid (signal fluctuations <5% in the presence of 10 μM interferents; <4% with uric acid). This work demonstrates the potential of the in situ growth strategy for high‐performance wearable sensors in health monitoring. Specifically, this device targets a challenging niche application: the noninvasive monitoring of branched‐chain amino acids (BCAAs) like leucine. This capability is critical for the early screening of metabolic disorders (e.g., Maple Syrup Urine Disease) and the real‐time management of muscle recovery in sports nutrition, offering a distinct advantage over traditional rigid analytical tools.
- 2 March 2026
- Published by Wiley in Electroanalysis
- Vol. 38 (3) , e70122
In Situ Growth of Prussian Blue Analog on Laser‐Induced Lignin‐Derived Porous Graphene Flexible Platform for Amino Acid Detection in Human Sweat
Prussian blue (PB) and its analogs (PBA) are widely used for modifying flexible electrochemical sensors due to their excellent electrocatalytic activity and low cost. However, traditional electrodeposition methods often result in uneven films with poor crystallinity and weak adhesion, compromising sensor stability and reproducibility. Herein, we propose a lignosulfonate (LS)‐assisted solution‐phase in situ growth strategy to achieve uniform nucleation and high‐loading growth of PBA nanocrystals on laser‐induced graphene (LIG) under mild conditions (45°C, atmospheric pressure). Leveraging the three‐dimensional porous structure and high surface area of LIG, combined with the dispersion and regulatory functions of LS, PBA crystals grow directly on the graphene framework, forming a tightly bound, highly crystalline active interface. Compared to electrodeposited PB, this approach enhances interfacial adhesion, prevents delamination, and simplifies the fabrication process, making it suitable for scalable, low‐cost flexible devices. Integrated with molecular imprinting technology (MIP), the resulting RE‐PBA@LIG@MIP electrode exhibits a peak current density of −5.29 mA cm −2 (12% higher than PB) and retains 88.48% activity after 2000 cycles. The sensor achieves a detection limit of 0.28 μM for leucine, with excellent selectivity against histidine, isoleucine, lysine, and uric acid (signal fluctuations <5% in the presence of 10 μM interferents; <4% with uric acid). This work demonstrates the potential of the in situ growth strategy for high‐performance wearable sensors in health monitoring. Specifically, this device targets a challenging niche application: the noninvasive monitoring of branched‐chain amino acids (BCAAs) like leucine. This capability is critical for the early screening of metabolic disorders (e.g., Maple Syrup Urine Disease) and the real‐time management of muscle recovery in sports nutrition, offering a distinct advantage over traditional rigid analytical tools.
- 28 March 2025
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 22 (5) , 2545-2555
Metal-Polyphenol Self-Assembled Nanophotothermal Agent for Precise Mitochondrial Targeted Photothermal Therapy
Nanocarriers have been extensively utilized to improve the stability of photothermal agents in vivo, enhance delivery efficiency, and reduce drug side effects. However, challenges, such as the low safety of carrier materials, insufficient loading of therapeutic agents, and complex preparation procedures, still persist. In this study, the photothermal agent IR780 was encapsulated in network TA-Fe3+ (TF) which was self-assembled by tannic acid (TA) and Fe3+ to synthesize an acid-responsive multifunctional nanophotothermal agent TF@IR780 (TR). In the slightly acidic tumor microenvironment (TME), network shell TF is degraded, and the internal photothermal agent IR780 is exposed. On the one hand, the TF network can improve the solubility and stability of photothermal agent IR780 in vivo and significantly increase the uptake efficiency in tumor cells. On the other hand, Fe3+ exhibits magnetic resonance imaging (MRI) functionality, which combined with the fluorescence imaging of IR780 endows TR with multimodal imaging capabilities. In addition, TR is easy to release photosensitizers through acid response in the low pH environment of TME, and achieves precise damage to mitochondria through mitochondrial anchoring and light regulation. This overcomes the drawbacks of traditional tumor treatment methods, such as poor specificity, and demonstrates efficient and controllable antitumor activity.
- 28 March 2025
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 22 (5) , 2545-2555
Metal-Polyphenol Self-Assembled Nanophotothermal Agent for Precise Mitochondrial Targeted Photothermal Therapy
Nanocarriers have been extensively utilized to improve the stability of photothermal agents in vivo, enhance delivery efficiency, and reduce drug side effects. However, challenges, such as the low safety of carrier materials, insufficient loading of therapeutic agents, and complex preparation procedures, still persist. In this study, the photothermal agent IR780 was encapsulated in network TA-Fe3+ (TF) which was self-assembled by tannic acid (TA) and Fe3+ to synthesize an acid-responsive multifunctional nanophotothermal agent TF@IR780 (TR). In the slightly acidic tumor microenvironment (TME), network shell TF is degraded, and the internal photothermal agent IR780 is exposed. On the one hand, the TF network can improve the solubility and stability of photothermal agent IR780 in vivo and significantly increase the uptake efficiency in tumor cells. On the other hand, Fe3+ exhibits magnetic resonance imaging (MRI) functionality, which combined with the fluorescence imaging of IR780 endows TR with multimodal imaging capabilities. In addition, TR is easy to release photosensitizers through acid response in the low pH environment of TME, and achieves precise damage to mitochondria through mitochondrial anchoring and light regulation. This overcomes the drawbacks of traditional tumor treatment methods, such as poor specificity, and demonstrates efficient and controllable antitumor activity.
- 19 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (9) , 14510-14519
Elements Doping Strategy for Improving the Thermoelectric Properties of g-C3N4/SWCNT Composite Films
Optimizing carrier concentration and transport has been demonstrated to be a practical strategy to improve the thermoelectric efficacy of single-walled carbon nanotube (SWCNT)-based composite films, which have potential application in self-powered wearable electronics. In this study, nonmetallic heteroatoms (boron, sulfur, and phosphorus) are selected to dope g-C3N4 to adjust the energy band structure for fabricating g-C3N4/SWCNT with high thermoelectric performance. Heteroatom doping of g-C3N4 improves the energy band structure and mobility of g-C3N4, which promotes the carrier transport between g-C3N4 and SWCNT and optimizes the carrier mobility and concentration of the composite, substantially improving both the Seebeck coefficient (S) and the electrical conductivity (σ) of g-C3N4/SWCNT. The results show that boron doped g-C3N4/SWCNT exhibits the maximum room temperature power factor (PF) of 198.4 μW m-1 K-2 alongside a Seebeck coefficient of 31.4 μV K-1 among the prepared nonmetallic heteroatom doped g-C3N4/SWCNT composite films. Furthermore, under a temperature difference of 60 K, the flexible thermoelectric device made of the composite film produces a high output power of 5.7 μW and a large open-circuit voltage of 50.3 mV. Thus, this study presents an innovative method for improving the efficacy of composite thermoelectric materials utilizing SWCNT and inorganic materials, demonstrating potential applications in flexible electronics.
- 19 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (9) , 14510-14519
Elements Doping Strategy for Improving the Thermoelectric Properties of g-C3N4/SWCNT Composite Films
Optimizing carrier concentration and transport has been demonstrated to be a practical strategy to improve the thermoelectric efficacy of single-walled carbon nanotube (SWCNT)-based composite films, which have potential application in self-powered wearable electronics. In this study, nonmetallic heteroatoms (boron, sulfur, and phosphorus) are selected to dope g-C3N4 to adjust the energy band structure for fabricating g-C3N4/SWCNT with high thermoelectric performance. Heteroatom doping of g-C3N4 improves the energy band structure and mobility of g-C3N4, which promotes the carrier transport between g-C3N4 and SWCNT and optimizes the carrier mobility and concentration of the composite, substantially improving both the Seebeck coefficient (S) and the electrical conductivity (σ) of g-C3N4/SWCNT. The results show that boron doped g-C3N4/SWCNT exhibits the maximum room temperature power factor (PF) of 198.4 μW m-1 K-2 alongside a Seebeck coefficient of 31.4 μV K-1 among the prepared nonmetallic heteroatom doped g-C3N4/SWCNT composite films. Furthermore, under a temperature difference of 60 K, the flexible thermoelectric device made of the composite film produces a high output power of 5.7 μW and a large open-circuit voltage of 50.3 mV. Thus, this study presents an innovative method for improving the efficacy of composite thermoelectric materials utilizing SWCNT and inorganic materials, demonstrating potential applications in flexible electronics.