Obert P. Golim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Obert P. Golim has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
E Sugiarti
2 shared publications- Mervi Paulasto-Kröckel
Department of Electrical Engineering and Automation, School of Electrical Engineering, Aalto University, Aalto, Finland
2 shared publications - Vesa Vuorinen
Department of Electrical Engineering and Automation, School of Electrical Engineering, Aalto University, Aalto, Finland
2 shared publications A N Muslimin
1 shared publicationC Ananta
Engineering Physics Department, Surya University, Tangerang, Banten, 15810 Indonesia
1 shared publicationE Jahja
Computer Sciences Department, Surya University, Tangerang, Banten, 15810 Indonesia
1 shared publication
Latest Publications
- Open Access
- 10 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (3) , 627-630
Facilitating Small-Pitch Interconnects With Low-Temperature Solid-Liquid Interdiffusion Bonding
The trend for 3D heterogeneous integration drives the need for a low-temperature bonding process for high-density interconnects (HDI). The Cu-Sn-In based solid-liquid interdiffusion (SLID) is a promising option as a low-temperature bonding technique that offers better processing flexibility and relatively lower costs for chip-sized substrates when compared to hybrid bonding. In this work, the low-temperature process was applied in a chip-to-chip bonding process. The test structures contain microbumps with 5 μm width and 15 μm pitch, mimicking state-of-the-art small-pitch interconnects. At the bonding temperature of 170 °C the process was completed within 5 minutes, while at 150 °C extended bonding time was required to completely transform low-melting materials into intermetallic phases. Electrical characterization, performed using three test structures, estimated a single interconnect resistivity as low as 1.3E-7 Ωm. This work showcases the potential of the low-temperature SLID bond process for HDI applications.
- 10 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (3) , 627-630
Open AccessFacilitating Small-Pitch Interconnects With Low-Temperature Solid-Liquid Interdiffusion Bonding
The trend for 3D heterogeneous integration drives the need for a low-temperature bonding process for high-density interconnects (HDI). The Cu-Sn-In based solid-liquid interdiffusion (SLID) is a promising option as a low-temperature bonding technique that offers better processing flexibility and relatively lower costs for chip-sized substrates when compared to hybrid bonding. In this work, the low-temperature process was applied in a chip-to-chip bonding process. The test structures contain microbumps with 5 μm width and 15 μm pitch, mimicking state-of-the-art small-pitch interconnects. At the bonding temperature of 170 °C the process was completed within 5 minutes, while at 150 °C extended bonding time was required to completely transform low-melting materials into intermetallic phases. Electrical characterization, performed using three test structures, estimated a single interconnect resistivity as low as 1.3E-7 Ωm. This work showcases the potential of the low-temperature SLID bond process for HDI applications.
- Open Access
- 1 September 2022
- Published by Elsevier in Scripta Materialia
- Vol. 222
Achieving low-temperature wafer level bonding with Cu-Sn-In ternary at 150 °C
- 1 September 2022
- Published by Elsevier in Scripta Materialia
- Vol. 222
Open AccessAchieving low-temperature wafer level bonding with Cu-Sn-In ternary at 150 °C
- 1 December 2020
- Published by Elsevier in Ceramics International
- Vol. 46 (17) , 27476-27483
Synthesis, neutron diffraction and photoluminescence properties of a whitlockite structured Ca9MgLi(PO4)7:Pr3+ phosphor
- 1 December 2020
- Published by Elsevier in Ceramics International
- Vol. 46 (17) , 27476-27483
Synthesis, neutron diffraction and photoluminescence properties of a whitlockite structured Ca9MgLi(PO4)7:Pr3+ phosphor
- Open Access
- 1 March 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1191
Morphological evolution of sol-gel synthesized Ag-TiO2 nanocomposite
- 1 March 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1191
Open AccessMorphological evolution of sol-gel synthesized Ag-TiO2 nanocomposite
- Open Access
- 16 May 2018
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 149 (1) , 012072
Development of Nanosatellite Technology with APRS Module for Disaster Mitigation
Development of nanosatellite technology has enabled satellites to be developed with multiple capabilities for a specific mission in a short time with a low cost. Satellite communications are proved to be more effective in delivering information due to its large coverage area. Surya Satellite-1 will become the first Indonesian nanosatellite developed by undergraduate students. It is designed with low-cost commercial payloads, including an APRS module for communication and operated on VHF and UHF amateur radio frequencies. The mission of the satellites focused on disaster mitigation through APRS communication network with remote stations located on disaster-prone areas.
- 16 May 2018
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 149 (1) , 012072
Open AccessDevelopment of Nanosatellite Technology with APRS Module for Disaster Mitigation
Development of nanosatellite technology has enabled satellites to be developed with multiple capabilities for a specific mission in a short time with a low cost. Satellite communications are proved to be more effective in delivering information due to its large coverage area. Surya Satellite-1 will become the first Indonesian nanosatellite developed by undergraduate students. It is designed with low-cost commercial payloads, including an APRS module for communication and operated on VHF and UHF amateur radio frequencies. The mission of the satellites focused on disaster mitigation through APRS communication network with remote stations located on disaster-prone areas.
- Open Access
- 19 March 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 985 (1) , 012036
Synthesis of alumina ceramic encapsulation for self-healing materials on thermal barrier coating
Durability of Thermal Barrier Coating or TBC can be optimized by inducing Self-Healing capabilities with intermetallic materials MoSi2. Nevertheless, high temperature operation causes the self-healing materials to become oxidized and lose its healing capabilities. Therefore, a method to introduce ceramic encapsulation for MoSi2 is needed to protect it from early oxidation. The encapsulation process is synthesized through a simple precipitation method with colloidal aluminum hydroxide as precursor and variations on calcination process. Semi-quantitative analysis on the synthesized sample is done by using X-ray diffraction (XRD) method. Meanwhile, qualitative analysis on the morphology of the encapsulation was carried out by using Scanning Electron Microscope (SEM) and Field Emission Scanning Electron Microscope (FESEM) equipped with dual Focus Ion Beam (FIB). The result of the experiment shows that calcination process significantly affects the final characteristic of encapsulation. The optimum encapsulation process was synthesized by colloidal aluminum hydroxide as a precursor, with a double step calcination process in low pressure until 900 °C.
- 19 March 2018
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 985 (1) , 012036
Open AccessSynthesis of alumina ceramic encapsulation for self-healing materials on thermal barrier coating
Durability of Thermal Barrier Coating or TBC can be optimized by inducing Self-Healing capabilities with intermetallic materials MoSi2. Nevertheless, high temperature operation causes the self-healing materials to become oxidized and lose its healing capabilities. Therefore, a method to introduce ceramic encapsulation for MoSi2 is needed to protect it from early oxidation. The encapsulation process is synthesized through a simple precipitation method with colloidal aluminum hydroxide as precursor and variations on calcination process. Semi-quantitative analysis on the synthesized sample is done by using X-ray diffraction (XRD) method. Meanwhile, qualitative analysis on the morphology of the encapsulation was carried out by using Scanning Electron Microscope (SEM) and Field Emission Scanning Electron Microscope (FESEM) equipped with dual Focus Ion Beam (FIB). The result of the experiment shows that calcination process significantly affects the final characteristic of encapsulation. The optimum encapsulation process was synthesized by colloidal aluminum hydroxide as a precursor, with a double step calcination process in low pressure until 900 °C.