Jeff R. Crandall
Research Subjects
Research Interests
Jeff R. Crandall has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- James R. Funk
Biocore LLC, Charlottesville, USA
5 shared publications - Ann M. Bailey
Biomechanics Consulting and Research, LLC, Charlottesville, USA
4 shared publications - Barry S. Myers
Department of Biomedical Engineering, Duke University, Durham, USA
3 shared publications - Kristy Bittenbender Arbogast
Children's Hospital of Philadelphia
3 shared publications - Erin J. Sanchez
Biomechanics Consulting and Engineering, Charlottesville, VA 22911, USA
2 shared publications - James R. Funk
Biodynamic Research Corporation, 5711 University Heights Blvd., Suite 100, San Antonio, TX 78249, USA
2 shared publications
Latest Publications
- Open Access
- 15 August 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (16) , 9278
Positional Movement Demands during NFL Football Games: A 3-Year Review
Understanding the in-game demands placed on athletes may allow practitioners to design improved training protocols to prepare athletes for competitive demands. This study aimed to quantify the competitive movement demands of professional American football athletes and to determine any inter-positional differences that may exist. Player tracking data were collected from 2018 to 2020 regular season games of the National Football League. Distance, maximum velocity, high-velocity efforts and distance, and acceleration and deceleration efforts and distance were used to evaluate competitive movement demands. To determine position-specific demands, each player was classified by their designated position, and velocity data from competitive games were used to develop position-specific velocity thresholds. One-way ANOVA and post hoc Bonferroni statistical analysis were used to determine inter-positional difference. Significant (p < 0.05) positional differences were found for all load metrics with respect to competitive game demands. Generally, wide receivers and defensive backs had faster maximum velocities, higher distances, and more acceleration and deceleration efforts and distance than other positions. Linebackers accumulated the most high-velocity efforts and distance. Lineman had the lowest values for all assessed metrics. These findings may assist the performance staff in developing improved training and return-to-play protocols with the aim of improving player performance and mitigating injury.
- 15 August 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (16) , 9278
Open AccessPositional Movement Demands during NFL Football Games: A 3-Year Review
Understanding the in-game demands placed on athletes may allow practitioners to design improved training protocols to prepare athletes for competitive demands. This study aimed to quantify the competitive movement demands of professional American football athletes and to determine any inter-positional differences that may exist. Player tracking data were collected from 2018 to 2020 regular season games of the National Football League. Distance, maximum velocity, high-velocity efforts and distance, and acceleration and deceleration efforts and distance were used to evaluate competitive movement demands. To determine position-specific demands, each player was classified by their designated position, and velocity data from competitive games were used to develop position-specific velocity thresholds. One-way ANOVA and post hoc Bonferroni statistical analysis were used to determine inter-positional difference. Significant (p < 0.05) positional differences were found for all load metrics with respect to competitive game demands. Generally, wide receivers and defensive backs had faster maximum velocities, higher distances, and more acceleration and deceleration efforts and distance than other positions. Linebackers accumulated the most high-velocity efforts and distance. Lineman had the lowest values for all assessed metrics. These findings may assist the performance staff in developing improved training and return-to-play protocols with the aim of improving player performance and mitigating injury.
- 10 August 2021
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 49 (10) , 2747-2759
Laboratory Evaluation of Shell Add-On Products for American Football Helmets for Professional Linemen
The Guardian Cap NXT (GC NXT) and the ProTech Helmet Cap (ProTech) are commercially available aftermarket products designed to augment the energy attenuation characteristics of American football helmets. The ability of these helmet shell add-on products to mitigate the severity of impacts typically experienced by professional offensive and defensive linemen was evaluated for seven helmet models using two test series. In linear impactor tests, the GC NXT reduced head impact severity as measured by the head acceleration response metric (HARM) by 9% relative to the helmets only, while the ProTech reduced HARM by 5%. While both products significantly improved the performance of the football helmets tested overall, effects varied by impact condition and helmet model with the add-ons worsening helmet performance in some conditions. The GC NXT had a strong effect size (Cohen’s d = 0.8) whereas the ProTech had a medium effect (Cohen’s d = 0.5). A second study investigated add-on performance for helmet-to-helmet impacts with eccentric impact vectors and resulted in a mixture of increased and decreased HARM when either add-on was placed on one or both helmets. Estimated risk for serious neck injury with add-ons and without differed by less than 4% for these eccentric impacts.
- 10 August 2021
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 49 (10) , 2747-2759
Laboratory Evaluation of Shell Add-On Products for American Football Helmets for Professional Linemen
The Guardian Cap NXT (GC NXT) and the ProTech Helmet Cap (ProTech) are commercially available aftermarket products designed to augment the energy attenuation characteristics of American football helmets. The ability of these helmet shell add-on products to mitigate the severity of impacts typically experienced by professional offensive and defensive linemen was evaluated for seven helmet models using two test series. In linear impactor tests, the GC NXT reduced head impact severity as measured by the head acceleration response metric (HARM) by 9% relative to the helmets only, while the ProTech reduced HARM by 5%. While both products significantly improved the performance of the football helmets tested overall, effects varied by impact condition and helmet model with the add-ons worsening helmet performance in some conditions. The GC NXT had a strong effect size (Cohen’s d = 0.8) whereas the ProTech had a medium effect (Cohen’s d = 0.5). A second study investigated add-on performance for helmet-to-helmet impacts with eccentric impact vectors and resulted in a mixture of increased and decreased HARM when either add-on was placed on one or both helmets. Estimated risk for serious neck injury with add-ons and without differed by less than 4% for these eccentric impacts.
- 6 October 2020
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 48 (11) , 2566-2579
Development and Evaluation of a Test Method for Assessing the Performance of American Football Helmets
As more is learned about injury mechanisms of concussion and scenarios under which injuries are sustained in football games, methods used to evaluate protective equipment must adapt. A combination of video review, videogrammetry, and laboratory reconstructions was used to characterize concussive impacts from National Football League games during the 2015-2017 seasons. Test conditions were generated based upon impact locations and speeds from this data set, and a method for scoring overall helmet performance was created. Head kinematics generated using a linear impactor and sliding table fixture were comparable to those from laboratory reconstructions of concussive impacts at similar impact conditions. Impact tests were performed on 36 football helmet models at two laboratories to evaluate the reproducibility of results from the resulting test protocol. Head acceleration response metric, a head impact severity metric, varied 2.9–5.6% for helmet impacts in the same lab, and 3.8–6.0% for tests performed in a separate lab when averaged by location for the models tested. Overall inter-lab helmet performance varied by 1.1 ± 0.9%, while the standard deviation in helmet performance score was 7.0%. The worst helmet performance score was 33% greater than the score of the best-performing helmet evaluated by this study.
- 6 October 2020
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 48 (11) , 2566-2579
Development and Evaluation of a Test Method for Assessing the Performance of American Football Helmets
As more is learned about injury mechanisms of concussion and scenarios under which injuries are sustained in football games, methods used to evaluate protective equipment must adapt. A combination of video review, videogrammetry, and laboratory reconstructions was used to characterize concussive impacts from National Football League games during the 2015-2017 seasons. Test conditions were generated based upon impact locations and speeds from this data set, and a method for scoring overall helmet performance was created. Head kinematics generated using a linear impactor and sliding table fixture were comparable to those from laboratory reconstructions of concussive impacts at similar impact conditions. Impact tests were performed on 36 football helmet models at two laboratories to evaluate the reproducibility of results from the resulting test protocol. Head acceleration response metric, a head impact severity metric, varied 2.9–5.6% for helmet impacts in the same lab, and 3.8–6.0% for tests performed in a separate lab when averaged by location for the models tested. Overall inter-lab helmet performance varied by 1.1 ± 0.9%, while the standard deviation in helmet performance score was 7.0%. The worst helmet performance score was 33% greater than the score of the best-performing helmet evaluated by this study.
- 6 October 2020
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 48 (11) , 2531-2541
Comparison of Laboratory and On-Field Performance of American Football Helmets
The relationship between laboratory and on-field performance of football helmets was assessed for 31 football helmet models selected from those worn by players in the 2015–2019 National Football League (NFL) seasons. Linear impactor tests were conducted with helmets placed on an instrumented Hybrid III head and neck assembly mounted on a sliding table. Based on impacts to each helmet at six impact locations and three velocities, a helmet performance score (HPS) was calculated using a linear combination of the head injury criterion (HIC) and the diffuse axonal multi-axis general evaluation (DAMAGE). To determine the on-field performance of helmets, helmet model usage, player participation, and incident concussion data were collected from the five NFL seasons and used to calculate helmet model-specific concussion rates. Comparison of laboratory HPS to the helmet model-specific concussion rates on a per play basis showed a positive correlation (r2 = 0.61, p < 0.001) between laboratory and on-field performance of helmet models, indicating that helmets which exhibited reduced impact severity in the laboratory tests were also generally associated with lower concussion rates on-field. Further analysis showed that NFL-prohibited helmet models exhibited a significantly higher odds of concussion (OR 1.24; 95% CI 1.04–1.47; p = 0.017) relative to other helmet models.
- 6 October 2020
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 48 (11) , 2531-2541
Comparison of Laboratory and On-Field Performance of American Football Helmets
The relationship between laboratory and on-field performance of football helmets was assessed for 31 football helmet models selected from those worn by players in the 2015–2019 National Football League (NFL) seasons. Linear impactor tests were conducted with helmets placed on an instrumented Hybrid III head and neck assembly mounted on a sliding table. Based on impacts to each helmet at six impact locations and three velocities, a helmet performance score (HPS) was calculated using a linear combination of the head injury criterion (HIC) and the diffuse axonal multi-axis general evaluation (DAMAGE). To determine the on-field performance of helmets, helmet model usage, player participation, and incident concussion data were collected from the five NFL seasons and used to calculate helmet model-specific concussion rates. Comparison of laboratory HPS to the helmet model-specific concussion rates on a per play basis showed a positive correlation (r2 = 0.61, p < 0.001) between laboratory and on-field performance of helmet models, indicating that helmets which exhibited reduced impact severity in the laboratory tests were also generally associated with lower concussion rates on-field. Further analysis showed that NFL-prohibited helmet models exhibited a significantly higher odds of concussion (OR 1.24; 95% CI 1.04–1.47; p = 0.017) relative to other helmet models.
- 6 October 2020
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 48 (11) , 2678-2690
Characterization of Concussive Events in Professional American Football Using Videogrammetry
Sports concussions offer a unique opportunity to study head kinematics associated with mild traumatic brain injury. In this study, a model-based image matching (MBIM) approach was employed to analyze video footage of 57 concussions which occurred in National Football League (NFL) games. By utilizing at least two camera views, higher frame rate footage (> 60 images s−1), and laser scans of the field and helmets involved in each case, it was possible to calculate the change in velocity of the helmet during impact in six degrees of freedom. The average impact velocity for these concussive events was 8.9 ± 2.0 m s−1. The average changes in translational and rotational velocity for the concussed players’ helmets were 6.6 ± 2.1 m s−1 and 29 ± 13 rad s−1, respectively. The average change in translational velocity was higher for helmet-to-ground (n = 16) impacts compared to helmet-to-helmet (n = 30) or helmet-to-shoulder (n = 11) events (p < 0.001), while helmet-to-shoulder impacts had a smaller change in rotational velocity compared to the other impact sources (p < 0.001). By quantifying the impact velocities and locations associated with concussive impacts in professional American football, this study provides information that may be used to improve upon current helmet testing methodologies.
- 6 October 2020
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 48 (11) , 2678-2690
Characterization of Concussive Events in Professional American Football Using Videogrammetry
Sports concussions offer a unique opportunity to study head kinematics associated with mild traumatic brain injury. In this study, a model-based image matching (MBIM) approach was employed to analyze video footage of 57 concussions which occurred in National Football League (NFL) games. By utilizing at least two camera views, higher frame rate footage (> 60 images s−1), and laser scans of the field and helmets involved in each case, it was possible to calculate the change in velocity of the helmet during impact in six degrees of freedom. The average impact velocity for these concussive events was 8.9 ± 2.0 m s−1. The average changes in translational and rotational velocity for the concussed players’ helmets were 6.6 ± 2.1 m s−1 and 29 ± 13 rad s−1, respectively. The average change in translational velocity was higher for helmet-to-ground (n = 16) impacts compared to helmet-to-helmet (n = 30) or helmet-to-shoulder (n = 11) events (p < 0.001), while helmet-to-shoulder impacts had a smaller change in rotational velocity compared to the other impact sources (p < 0.001). By quantifying the impact velocities and locations associated with concussive impacts in professional American football, this study provides information that may be used to improve upon current helmet testing methodologies.
- 30 April 2018
- Published by ASME International in Journal of Biomechanical Engineering
- Vol. 140 (6)
Inertial Properties of Football Helmets
The inertial properties of a helmet play an important role in both athletic performance and head protection. In this study, we measured the inertial properties of 37 football helmets, a National Operating Committee on Standards for Athletic Equipment (NOCSAE) size 7¼ headform, and a 50th percentile male Hybrid III dummy head. The helmet measurements were taken with the helmets placed on the Hybrid III dummy head. The center of gravity and moment of inertia were measured about six axes (x, y, z, xy, yz, and xz), allowing for a complete description of the inertial properties of the head and helmets. Total helmet mass averaged 1834±231 g, split between the shell (1377±200 g) and the facemask (457±101 g). On average, the football helmets weighed 41±5% as much as the Hybrid III dummy head. The center of gravity of the helmeted head was 1.1±3.0 mm anterior and 10.3±1.9 mm superior to the center of gravity of the bare head. The moment of inertia of the helmeted head was approximately 2.2±0.2 times greater than the bare head about all axes.
- 30 April 2018
- Published by ASME International in Journal of Biomechanical Engineering
- Vol. 140 (6)
Inertial Properties of Football Helmets
The inertial properties of a helmet play an important role in both athletic performance and head protection. In this study, we measured the inertial properties of 37 football helmets, a National Operating Committee on Standards for Athletic Equipment (NOCSAE) size 7¼ headform, and a 50th percentile male Hybrid III dummy head. The helmet measurements were taken with the helmets placed on the Hybrid III dummy head. The center of gravity and moment of inertia were measured about six axes (x, y, z, xy, yz, and xz), allowing for a complete description of the inertial properties of the head and helmets. Total helmet mass averaged 1834±231 g, split between the shell (1377±200 g) and the facemask (457±101 g). On average, the football helmets weighed 41±5% as much as the Hybrid III dummy head. The center of gravity of the helmeted head was 1.1±3.0 mm anterior and 10.3±1.9 mm superior to the center of gravity of the bare head. The moment of inertia of the helmeted head was approximately 2.2±0.2 times greater than the bare head about all axes.
- 1 January 2012
- Vol. 48, 134-40
Injuries caused by brake pedal loading of the midfoot.
In a frontal car crash, the driver’s foot and ankle may be injured due to loading by the brake pedal. The driver of a vehicle often has time to initiate emergency braking before an impending collision, which places the forefoot or midfoot over the brake pedal. During the crash, the pedal may induce dorsiflexion and axial loading of the ankle due to forward motion of the occupant and rearward intrusion of the pedal relative to the vehicle. In order to investigate the injuries caused by pedal loading, impact tests were conducted on three cadaveric lower limbs. The limbs were braced at the knee, and a pedal positioned beneath the midfoot was driven towards the knee, inducing dorsiflexion and axial loading of the cadaveric limb. Ankle injury was generated in two specimens. Both injured limbs sustained a medial malleolar fracture, and one limb also suffered a talar neck fracture. These results suggest that pedal loading may be an important injury mechanism for fractures of the medial malleolus and talar neck in drivers involved in frontal crashes.
- 1 January 2012
- Vol. 48, 134-40
Injuries caused by brake pedal loading of the midfoot.
In a frontal car crash, the driver’s foot and ankle may be injured due to loading by the brake pedal. The driver of a vehicle often has time to initiate emergency braking before an impending collision, which places the forefoot or midfoot over the brake pedal. During the crash, the pedal may induce dorsiflexion and axial loading of the ankle due to forward motion of the occupant and rearward intrusion of the pedal relative to the vehicle. In order to investigate the injuries caused by pedal loading, impact tests were conducted on three cadaveric lower limbs. The limbs were braced at the knee, and a pedal positioned beneath the midfoot was driven towards the knee, inducing dorsiflexion and axial loading of the cadaveric limb. Ankle injury was generated in two specimens. Both injured limbs sustained a medial malleolar fracture, and one limb also suffered a talar neck fracture. These results suggest that pedal loading may be an important injury mechanism for fractures of the medial malleolus and talar neck in drivers involved in frontal crashes.
- 1 January 2006
- Vol. 42, 160-5
Calculation of tibial loading using strain gauges.
The standard methodology for measuring loads in long bones is the in situ load cell, which enables direct measurements, but alters the stiffness and mass of the subject bone. Bone loading can also be calculated by applying linear beam theory to measurements from strain gauges affixed to the bone surface. The efficacy of the strain gauge method was assessed in this study by mounting three strain gauge rosettes to the midshaft of the tibia in two cadaveric above-knee leg specimens. The specimens were subjected to quasistatic axial compression tests, and then the tibia was removed and subjected to four-point bending tests. Linear beam theory for an irregularly shaped cross-section was used to calculate the axial load and bending moments in the tibia. It was possible to accurately calculate the bending moments in the bone, but the calculated axial loads appeared to be grossly in error (up to nearly 50%). This error was attributed to bone curvature and deviations from assumptions of bone homogeneity and linearity. The errors in the axial load results could be corrected by calculating an "effective" centroid for each bone, which was found to be approximately 1.5 mm away from the location of the area centroid as determined from CT scans. In spite of the error associated with calculating axial loads, this methodology shows promise for straight bones and for biomechanical experiments in which long bone bending is the parameter of greatest interest and implanting a load cell is problematic (e.g., vehicle-pedestrian tests).
- 1 January 2006
- Vol. 42, 160-5
Calculation of tibial loading using strain gauges.
The standard methodology for measuring loads in long bones is the in situ load cell, which enables direct measurements, but alters the stiffness and mass of the subject bone. Bone loading can also be calculated by applying linear beam theory to measurements from strain gauges affixed to the bone surface. The efficacy of the strain gauge method was assessed in this study by mounting three strain gauge rosettes to the midshaft of the tibia in two cadaveric above-knee leg specimens. The specimens were subjected to quasistatic axial compression tests, and then the tibia was removed and subjected to four-point bending tests. Linear beam theory for an irregularly shaped cross-section was used to calculate the axial load and bending moments in the tibia. It was possible to accurately calculate the bending moments in the bone, but the calculated axial loads appeared to be grossly in error (up to nearly 50%). This error was attributed to bone curvature and deviations from assumptions of bone homogeneity and linearity. The errors in the axial load results could be corrected by calculating an "effective" centroid for each bone, which was found to be approximately 1.5 mm away from the location of the area centroid as determined from CT scans. In spite of the error associated with calculating axial loads, this methodology shows promise for straight bones and for biomechanical experiments in which long bone bending is the parameter of greatest interest and implanting a load cell is problematic (e.g., vehicle-pedestrian tests).