Xuewu Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xuewu Li has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Fan Zhang
Beijing Microelectronics Technology Institute, Beijing 100076, China
2 shared publications - Huabo Sun
Beijing Microelectronics Technology Institute, Beijing 100076, China
2 shared publications - Lei Chen
Beijing Microelectronics Technology Institute, Beijing 100076, China
2 shared publications - Chenguang Guo
Beijing Microelectronics Technology Institute, Beijing 100076, China
1 shared publication Lei Chen
1 shared publicationMingqian Yang
1 shared publication
Latest Publications
- Open Access
A Review on Soft Error Correcting Techniques of Aerospace-Grade Static RAM-Based Field-Programmable Gate Arrays
Aerospace-grade SRAM-based field-programmable gate arrays (FPGAs) used in space applications are highly susceptible to single event effects, leading to soft errors in FPGAs. Additionally, as FPGAs scale up, the difficulty of correcting soft errors also increases. This paper proposes that performing soft error sensitivity analysis on FPGAs can help target the more sensitive areas for detection and correction, thereby improving the efficiency of soft error repair. Firstly, in accordance with the dual-layer architecture of SRAM-based FPGAs, methods for the soft error sensitivity analysis of FPGA application layer resources and configuration bitstreams are reviewed. Subsequently, based on the analysis results, it also covers corresponding application layer memory scrubbing and configuration scrubbing techniques. A prospective look at emerging soft error mitigation technologies is discussed at the end of this review, supporting the development of highly reliable aerospace-grade SRAM-based FPGAs.
Open AccessA Review on Soft Error Correcting Techniques of Aerospace-Grade Static RAM-Based Field-Programmable Gate Arrays
Aerospace-grade SRAM-based field-programmable gate arrays (FPGAs) used in space applications are highly susceptible to single event effects, leading to soft errors in FPGAs. Additionally, as FPGAs scale up, the difficulty of correcting soft errors also increases. This paper proposes that performing soft error sensitivity analysis on FPGAs can help target the more sensitive areas for detection and correction, thereby improving the efficiency of soft error repair. Firstly, in accordance with the dual-layer architecture of SRAM-based FPGAs, methods for the soft error sensitivity analysis of FPGA application layer resources and configuration bitstreams are reviewed. Subsequently, based on the analysis results, it also covers corresponding application layer memory scrubbing and configuration scrubbing techniques. A prospective look at emerging soft error mitigation technologies is discussed at the end of this review, supporting the development of highly reliable aerospace-grade SRAM-based FPGAs.
- Open Access
- 18 December 2020
- Published by MDPI AG in Electronics
- Vol. 9 (12) , 2177
Research on Hex Programmable Interconnect Points Test in Island-Style FPGA
With the decreasing size of manufacturing process, the scale of island-style field programmable gate array (FPGA) becomes larger, which leads to the increasing complexity of FPGA routing resources, especially hex programmable interconnect points (PIPs). Hex PIPs which span six tiles of the island-style FPGA have complex interconnect rules. Accordingly, research on complete hex PIPs test is rarely involved in the study of routing resources test. Therefore, this paper analyzes the hex PIPs architecture of the island-style FPGA, summarizes the interconnect rules of the hex PIPs mathematically in a two-dimensional coordinate system, and presents two proper test algorithms at the same time. The hex PIPs are divided into three directions, that is, horizontal, vertical, and oblique. According to the proposed coordinate equations, a cycle test structure in the horizontal and vertical directions and a test structure with partial-cascade patterns in the oblique direction are designed respectively. It is concluded that the proposed methods can achieve 100% fault coverage for the hex PIPs test in all directions, and the configuration number for hex lines test with the same methods is significantly decreased than previous researches.
- 18 December 2020
- Published by MDPI AG in Electronics
- Vol. 9 (12) , 2177
Open AccessResearch on Hex Programmable Interconnect Points Test in Island-Style FPGA
With the decreasing size of manufacturing process, the scale of island-style field programmable gate array (FPGA) becomes larger, which leads to the increasing complexity of FPGA routing resources, especially hex programmable interconnect points (PIPs). Hex PIPs which span six tiles of the island-style FPGA have complex interconnect rules. Accordingly, research on complete hex PIPs test is rarely involved in the study of routing resources test. Therefore, this paper analyzes the hex PIPs architecture of the island-style FPGA, summarizes the interconnect rules of the hex PIPs mathematically in a two-dimensional coordinate system, and presents two proper test algorithms at the same time. The hex PIPs are divided into three directions, that is, horizontal, vertical, and oblique. According to the proposed coordinate equations, a cycle test structure in the horizontal and vertical directions and a test structure with partial-cascade patterns in the oblique direction are designed respectively. It is concluded that the proposed methods can achieve 100% fault coverage for the hex PIPs test in all directions, and the configuration number for hex lines test with the same methods is significantly decreased than previous researches.
- 1 January 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1955 (1) , 040084
A dynamically reconfigurable multi-functional PLL for SRAM-based FPGA in 65nm CMOS technology
Phase-locked loops (PLL) have been widely utilized in FPGA as an important module for clock management. PLL with dynamic reconfiguration capability is always welcomed in FPGA design as it is able to decrease power consumption and simultaneously improve flexibility. In this paper, a multi-functional PLL with dynamic reconfiguration capability for 65nm SRAM-based FPGA is proposed. Firstly, configurable charge pump and loop filter are utilized to optimize the loop bandwidth. Secondly, the PLL incorporates a VCO with dual control voltages to accelerate the adjustment of oscillation frequency. Thirdly, three configurable dividers are presented for flexible frequency synthesis. Lastly, a configuration block with dynamic reconfiguration function is proposed. Simulation results demonstrate that the proposed multi-functional PLL can output clocks with configurable division ratio, phase shift and duty cycle. The PLL can also be dynamically reconfigured without affecting other parts’ running or halting the FPGA device.
- 1 January 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1955 (1) , 040084
A dynamically reconfigurable multi-functional PLL for SRAM-based FPGA in 65nm CMOS technology
Phase-locked loops (PLL) have been widely utilized in FPGA as an important module for clock management. PLL with dynamic reconfiguration capability is always welcomed in FPGA design as it is able to decrease power consumption and simultaneously improve flexibility. In this paper, a multi-functional PLL with dynamic reconfiguration capability for 65nm SRAM-based FPGA is proposed. Firstly, configurable charge pump and loop filter are utilized to optimize the loop bandwidth. Secondly, the PLL incorporates a VCO with dual control voltages to accelerate the adjustment of oscillation frequency. Thirdly, three configurable dividers are presented for flexible frequency synthesis. Lastly, a configuration block with dynamic reconfiguration function is proposed. Simulation results demonstrate that the proposed multi-functional PLL can output clocks with configurable division ratio, phase shift and duty cycle. The PLL can also be dynamically reconfigured without affecting other parts’ running or halting the FPGA device.